Advanced hybrid nanomaterials

• Andreas Taubert,
• Fabrice Leroux,
• Pierre Rabu and
• Verónica de Zea Bermudez

Beilstein J. Nanotechnol. 2019, 10, 2563–2567, doi:10.3762/bjnano.10.247

• nanostructuration and related issues. Nanofillers Nanocomposites remain a vast playground for research into new hybrid systems. A common approach for polymer fillers presented in this thematic issue is their use as organo-modified layered double hydroxides (LDHs) or new layered calcium phenylphosphonates, as well

• hydrophobicity and lipophilicity. Exfoliated nanosheets of layered calcium phenylphosphonate assisted by solvent were used in “Layered calcium phenylphosphonate: a hybrid material for a new generation of nanofillers” to promote the mechanical properties and improve the barrier effect for applications such as

Bombesin receptor-targeted liposomes for enhanced delivery to lung cancer cells

• Mohammad J. Akbar,
• Pâmela C. Lukasewicz Ferreira,
• Melania Giorgetti,
• Leanne Stokes and
• Christopher J. Morris

Beilstein J. Nanotechnol. 2019, 10, 2553–2562, doi:10.3762/bjnano.10.246

• , Tyr4-Bn. A dose-dependent increase in intracellular calcium release was observed for NCI-H345 but not the GRPR deficient SCLC line, NCI-H82 (Figure 1a,b), as previously reported [17][18]. The physiological role of GRPR includes the stimulation of a mitogenic response after receptor internalisation [19

• ). Sources of other exceptional items are mentioned in the text. Calcium release assay NCI-H345 and NCI-H82 cells were loaded with 2 µM Fura-2AM (Thermo Fisher, UK) in Hank’s Balanced Salt Solution (HBSS) loading buffer containing sulfinpyrazone at 37 °C for 40–60 minutes. Following loading, the buffer was

Synthesis of highly active ETS-10-based titanosilicate for heterogeneously catalyzed transesterification of triglycerides

• Muhammad A. Zaheer,
• David Poppitz,
• Khavar Feyzullayeva,
• Marianne Wenzel,
• Jörg Matysik,
• Radomir Ljupkovic,
• Aleksandra Zarubica,
• Alexander A. Karavaev,
• Andreas Pöppl,
• Roger Gläser and
• Muslim Dvoyashkin

Beilstein J. Nanotechnol. 2019, 10, 2039–2061, doi:10.3762/bjnano.10.200

• removal [13]. Amongst the prospective solid catalysts designed for transesterification reactions, such as calcium [14] and other metal oxides [15], metal–organic frameworks (MOFs) [10], silica-supported catalysts [16], biochar [17] and other biomass-derived catalysts [18], zeolites and molecular sieves

• outperform them in terms of stability and ability for regeneration. Experimental Materials and chemicals used in the preparation of CaO- and ETS-10-based catalysts Calcium oxide of technical grade (Centrochem Co., Serbia) was used as a precursor in the preparation of CaO-based catalysts. For the preparation

Long-term entrapment and temperature-controlled-release of SF₆ gas in metal–organic frameworks (MOFs)

• Hana Bunzen,
• Andreas Kalytta-Mewes,
• Leo van Wüllen and
• Dirk Volkmer

Beilstein J. Nanotechnol. 2019, 10, 1851–1859, doi:10.3762/bjnano.10.180

• to obtain kinetic parameters during a mass loss [30][31]. Until now it has been mainly used to study organic polymers (e.g., poly(ethylene) and poly(styrene)) and simple inorganic compounds (e.g., calcium carbonate and calcium oxalate) [31]. Here we used the method to estimate the activation energy

Tailoring the stability/aggregation of one-dimensional TiO₂(B)/titanate nanowires using surfactants

• Atiđa Selmani,
• Johannes Lützenkirchen,
• Kristina Kučanda,
• Dario Dabić,
• Engelbert Redel,
• Ida Delač Marion,
• Damir Kralj,
• Darija Domazet Jurašin and
• Maja Dutour Sikirić

Beilstein J. Nanotechnol. 2019, 10, 1024–1037, doi:10.3762/bjnano.10.103

• different solution and interfacial behavior compared to corresponding conventional monomeric surfactants [32][33][34]. The interaction of gemini surfactants with solid (nano)surfaces such as clay [35], calcium phosphate [36], silica [37][38][39][40], TiO2 [41], ZnO [42] and carbon NTs [43] have been

Ultrathin hydrophobic films based on the metal organic framework UiO-66-COOH(Zr)

• Miguel A. Andrés,
• Clemence Sicard,
• Christian Serre,
• Olivier Roubeau and
• Ignacio Gascón

Beilstein J. Nanotechnol. 2019, 10, 654–665, doi:10.3762/bjnano.10.65

• OPD/MOF ultrathin films have been fabricated onto glass, calcium fluoride, quartz crystal microbalance (QCM), Si(100) substrates and mica and characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), atomic force microscopy (AFM

• inspection. IR spectra were obtained using a Perking Elmer Spectrum 100 spectrometer operated in transmission mode for films and in attenuated total reflectance (ATR) mode for powder samples. The films were deposited onto calcium fluoride windows. Water contact angle measurements were performed on different

Targeting strategies for improving the efficacy of nanomedicine in oncology

• Gonzalo Villaverde and
• Alejandro Baeza

Beilstein J. Nanotechnol. 2019, 10, 168–181, doi:10.3762/bjnano.10.16

• the control of the intracellular calcium concentration or the removing of the oxidative species, which could damage the cell. Therefore, the specific delivery of toxic species to these key organelles compromises the function of the entire cell causing its destruction. Yoong et al. have decorated the

Characterization and influence of hydroxyapatite nanopowders on living cells

• Przemyslaw Oberbek,
• Tomasz Bolek,
• Adrian Chlanda,
• Seishiro Hirano,
• Sylwia Kusnieruk,
• Julia Rogowska-Tylman,
• Ganna Nechyporenko,
• Viktor Zinchenko,
• Wojciech Swieszkowski and
• Tomasz Puzyn

Beilstein J. Nanotechnol. 2018, 9, 3079–3094, doi:10.3762/bjnano.9.286

• (OH)2) is a calcium phosphate, structurally and chemically similar to the mineral phase of human bone and teeth. Due to its high biocompatibility and bioactivity, it has been successfully applied in the manufacturing of cosmetics and hygiene products, as well as in bone-tissue engineering and

• regenerative medicine. The use of nanosized hydroxyapatites in biomedical applications is constantly growing due to their good mechanical properties and enhanced efficiency of gene transfection in drug delivery. Calcium phosphates are sensitive to the preparation conditions [11][12][13][14][15]. They can be

• ], with and without the admixture of fluorine (CaHAP300 and CaHFAP300, respectively) and with subsequent filter drying. Hydroxyapatites from the Laboratory of Nanostructures and from the Bogatsky Institute were synthesized with a calcium deficiency. The Ca/P atomic ratio of the obtained HAp samples is

Co-intercalated layered double hydroxides as thermal and photo-oxidation stabilizers for polypropylene

• Qian Zhang,
• Qiyu Gu,
• Fabrice Leroux,
• Pinggui Tang,
• Dianqing Li and
• Yongjun Feng

Beilstein J. Nanotechnol. 2018, 9, 2980–2988, doi:10.3762/bjnano.9.277

• Auvergne, Institut de Chimie de Clermont-Ferrand ICCF, UMR-CNRS 6296, F 63171 Aubière, France 10.3762/bjnano.9.277 Abstract An elegant and efficient approach consisting in the co-intercalation of stabilizing molecular anions is described here. The thermal stabilizer calcium diethyl bis[[[3,5-bis(1,1

Hybrid Au@alendronate nanoparticles as dual chemo-photothermal agent for combined cancer treatment

• Anouchka Plan Sangnier,
• Romain Aufaure,
• Laurence Motte,
• Claire Wilhelm,
• Erwann Guenin and
• Yoann Lalatonne

Beilstein J. Nanotechnol. 2018, 9, 2947–2952, doi:10.3762/bjnano.9.273

• phosphonate groups. The BP affinity for calcium is improved by adding a hydroxy (–OH) group, for instance in HMBP (hydroxylmethylene bisphosphonate), allowing for a tridentate coordination to Ca2+ ions (Supporting Information File 1, Figure S4) and leading to a high affinity to bone (hydroxyapatite (Ca10(PO4

Layered calcium phenylphosphonate: a hybrid material for a new generation of nanofillers

• Kateřina Kopecká,
• Ludvík Beneš,
• Klára Melánová,
• Vítězslav Zima,
• Petr Knotek and
• Kateřina Zetková

Beilstein J. Nanotechnol. 2018, 9, 2906–2915, doi:10.3762/bjnano.9.269

• /bjnano.9.269 Abstract The use of nanosheets of layered calcium phenylphosphonate as a filler in a polymeric matrix was investigated. Layered calcium phenylphosphonate (CaPhP), with chemical formula CaC6H5PO3∙2H2O, is a hybrid organic–inorganic material that exhibits a hydrophobic character due to the

• organophosphonates have been prepared. Well-known and well-studied are the organophosphonates of zirconium because of their good stability; however, it is also possible to prepare layered structures with divalent metals such as calcium, strontium or barium [6][7][8][9]. Although the properties of these compounds

• forces. The main advantage is that a ready-to-use dispersion of nanoplatelets is obtained, so the step of dispersing dry nanoparticles in a polymer matrix is avoided, which is usually challenging, and thus simplifies the preparation of the polymer composites. In this work, layered calcium

Enhanced antineoplastic/therapeutic efficacy using 5-fluorouracil-loaded calcium phosphate nanoparticles

• Shanid Mohiyuddin,
• Saba Naqvi and
• Gopinath Packirisamy

Beilstein J. Nanotechnol. 2018, 9, 2499–2515, doi:10.3762/bjnano.9.233

• , retention, and low toxicity, as well as surface engineering with targeting moieties, can be used as a tool in enhancing the therapeutic efficacy of current approaches. Inorganic calcium phosphate nanoparticles have the potential to increase the therapeutic potential of antiproliferative drugs due to their

• excellent loading efficiency, biodegradable nature and controlled-release behaviour. Herein, we report a novel system of 5-fluorouracil (5-FU)-loaded calcium phosphate nanoparticles (CaP@5-FU NPs) synthesized via a reverse micelle method. The formation of monodispersed, spherical, crystalline nanoparticles

• upon CaP@5-FU NP treatment. Likewise, the cell cycle analysis was performed to confirm the enhanced apoptotic induction. Our study concludes that the calcium phosphate nanocarriers system, i.e. CaP@5-FU NPs, has higher antineoplastic potential as compared to 5-FU alone and can be used as an improved

Nanocellulose: Recent advances and its prospects in environmental remediation

• Katrina Pui Yee Shak,
• Yean Ling Pang and
• Shee Keat Mah

Beilstein J. Nanotechnol. 2018, 9, 2479–2498, doi:10.3762/bjnano.9.232

• nanocellulose for example, is desired due to their good performance in the removal of organic pollutants. Hokkanen et al. [88] reported that calcium hydroxyapatite-microfibrillated cellulose adsorbent was effective for the removal of chromium (Cr(VI)) from aqueous solution. They found that calcium

The role of adatoms in chloride-activated colloidal silver nanoparticles for surface-enhanced Raman scattering enhancement

• Nicolae Leopold,
• Andrei Stefancu,
• Krisztian Herman,
• István Sz. Tódor,
• Stefania D. Iancu,
• Vlad Moisoiu and
• Loredana F. Leopold

Beilstein J. Nanotechnol. 2018, 9, 2236–2247, doi:10.3762/bjnano.9.208

• ), hydrogen peroxide (10% w/w solution, AppliChem), sodium citrate dihydrate (99%, Sigma-Aldrich), hydroxylamine hydrochloride (99%, Sigma-Aldrich), magnesium sulfate (99%, Sigma-Aldrich), calcium nitrate tetrahydrate (99%, Sigma-Aldrich), potassium iodide (99%, Sigma-Aldrich), crystal violet chloride (Reag

Preparation of micro/nanopatterned gelatins crosslinked with genipin for biocompatible dental implants

• Reika Makita,
• Tsukasa Akasaka,
• Seiichi Tamagawa,
• Yasuhiro Yoshida,
• Saori Miyata,
• Hirofumi Miyaji and
• Tsutomu Sugaya

Beilstein J. Nanotechnol. 2018, 9, 1735–1754, doi:10.3762/bjnano.9.165

• with genipin [39]. Nadeem et al. have also reported that three-dimensional calcium phosphate/gelatin composite scaffolds, with an integrated surface pattern, could be fabricated by crosslinking with genipin [38]. These calcium phosphate/gelatin composite scaffolds could be fabricated with 40 µm pits

Review on nanoparticles and nanostructured materials: history, sources, toxicity and regulations

• Jaison Jeevanandam,
• Ahmed Barhoum,
• Yen S. Chan,
• Alain Dufresne and
• Michael K. Danquah

Beilstein J. Nanotechnol. 2018, 9, 1050–1074, doi:10.3762/bjnano.9.98

Bioinspired self-healing materials: lessons from nature

• Joseph C. Cremaldi and
• Bharat Bhushan

Beilstein J. Nanotechnol. 2018, 9, 907–935, doi:10.3762/bjnano.9.85

• typically from chitin, cuticle (a chitin–protein composite material), or calcium carbonate [67]. Figure 5A shows the various layers that compose the epidermis and exoskeleton [68]. Secretion of exoskeletal material adds to the exoskeleton’s thickness, growing the exoskeleton from within [26]. This very

Heavy-metal detectors based on modified ferrite nanoparticles

• Urszula Klekotka,
• Ewelina Wińska,
• Elżbieta Zambrzycka-Szelewa,
• Dariusz Satuła and
• Beata Kalska-Szostko

Beilstein J. Nanotechnol. 2018, 9, 762–770, doi:10.3762/bjnano.9.69

• Abstract In this work, we analyze artificial heavy-metal solutions with ferrite nanoparticles. Measurements of adsorption effectiveness of different kinds of particles, pure magnetite or magnetite doped with calcium, cobalt, manganese, or nickel ions, were carried out. A dependence of the adsorption

• , for example such as linker concentration, heavy ions concentration, pH value, or inorganic core composition, and such studies are in progress and will be a subject of subsequent papers. Conclusion Ferrite nanoparticles doped with calcium, cobalt, nickel, or manganese show differences in ion adsorption

• depending on the type of core. This indicates that the strength of the interparticle interaction can be one of the parameters governing the adsorption capability. It has been confirmed that calcium-modified ferrite is the most effective in Pb case, but only when the core is modified by PA. In any other case

Perovskite-structured CaTiO₃ coupled with g-C₃N₄ as a heterojunction photocatalyst for organic pollutant degradation

• Ashish Kumar,
• Christian Schuerings,
• Suneel Kumar,
• Ajay Kumar and
• Venkata Krishnan

Beilstein J. Nanotechnol. 2018, 9, 671–685, doi:10.3762/bjnano.9.62

• pollutants from water very effectively. Experimental Materials Both titanium diisopropoxide bis(acetylacetonate) and dicyandiamide were purchased from Sigma-Aldrich, India. Calcium nitrate (Ca(NO3)2·4H2O), acrylamide and D-glucose were supplied by MP Biomedicals, India. Ammonia solution (NH3 about 25

Optimisation of purification techniques for the preparation of large-volume aqueous solar nanoparticle inks for organic photovoltaics

• Furqan Almyahi,
• Thomas R. Andersen,
• Nathan A. Cooling,
• Natalie P. Holmes,
• Matthew J. Griffith,
• Krishna Feron,
• Xiaojing Zhou,
• Warwick J. Belcher and
• Paul C. Dastoor

Beilstein J. Nanotechnol. 2018, 9, 649–659, doi:10.3762/bjnano.9.60

• 110 °C for 5 min in nitrogen glove box. Under vacuum (2 × 10−6 Torr) calcium (film thickness ≈30 nm) and aluminium (film thickness ≈100 nm) electrodes (Ca/Al) were thermally evaporated. Film thickness The Film thickness of the active layer was determined based on an average of 4 scans by profilometry

Bombyx mori silk/titania/gold hybrid materials for photocatalytic water splitting: combining renewable raw materials with clean fuels

• Stefanie Krüger,
• Michael Schwarze,
• Otto Baumann,
• Christina Günter,
• Michael Bruns,
• Christian Kübel,
• Dorothée Vinga Szabó,
• Rafael Meinusch,
• Verónica de Zea Bermudez and
• Andreas Taubert

Beilstein J. Nanotechnol. 2018, 9, 187–204, doi:10.3762/bjnano.9.21

• ), calcium chloride dihydrate (CaCl2·2H2O, ≥99%, Carl Roth), ethanol (EtOH; 99%, VWR), ethyl acetoacetate (EtAcAc, 99%, Alfa Aesar), glutaraldehyde solution (GA, 25% in H2O, Sigma-Aldrich), hydrogen tetrachloridoaurate(III) trihydrate (HAuCl4·3H2O, 99.99%, Alfa Aesar), poly(ethylene oxide) (PEO780, nominal

Angstrom-scale flatness using selective nanoscale etching

• Takashi Yatsui,
• Hiroshi Saito and
• Katsuyuki Nobusada

Beilstein J. Nanotechnol. 2017, 8, 2181–2185, doi:10.3762/bjnano.8.217

• the etching characteristics using a two-dimensional Fourier analysis. Experimental Nanoscale etching For dry etching, we used Cl2 gas at a pressure of 200 Pa. 25 wt % calcium hypochlorous acid (Ca(ClO)2) was used as the source ion for wet etching. To dissociate the Cl2 or hypochlorous acid, we used a

Bi-layer sandwich film for antibacterial catheters

• Gerhard Franz,
• Florian Schamberger,
• Hamideh Heidari Zare,
• Sara Felicitas Bröskamp and
• Dieter Jocham

Beilstein J. Nanotechnol. 2017, 8, 1982–2001, doi:10.3762/bjnano.8.199

• ammonia, thereby enlarging the pH value. In turn, the formation of inorganic deposits (mainly hydroxyapatite, calcium oxalate and struvite) is promoted [5]. In ureteral stents with their maximum lumen of 1 mm, these deposits can completely block the drainage [6]. In both systems, the initial colonization

Group-13 and group-15 doping of germanane

• Nicholas D. Cultrara,
• Maxx Q. Arguilla,
• Shishi Jiang,
• Chuanchuan Sun,
• Michael R. Scudder,
• R. Dominic Ross and
• Joshua E. Goldberger

Beilstein J. Nanotechnol. 2017, 8, 1642–1648, doi:10.3762/bjnano.8.164

• adapted from those reported previously [25]. For undoped GeH, stoichiometric amounts of calcium (Acros, 99%) and germanium (Acros, 99.999%) were sealed in quartz tubes under vacuum of less than 60 mTorr. The sample was annealed at 950 °C for 18 h, and slowly cooled to room temperature over the course of 2

• %), or antimony (Strem 99%) was used to replace germanium in the initial calcium and germanium mixture. Again, these materials were sealed in quartz tubes under vacuum and annealed following the same procedures as undoped germanane. The experiments with Sb resulted in the formation of a mixture of

• represents the dopant atom, blue is germanium, yellow is calcium and black is hydrogen. The number of dopants depicted here is purposefully inflated for visual effect. c) Powder XRD, d) Raman spectra, and e) FTIR spectra of GeH (black), 2.3% Ga:GeH (red), and 1.1% As:GeH (gray). The starred peaks in the XRD

Calcium fluoride based multifunctional nanoparticles for multimodal imaging

• Marion Straßer,
• Joachim H. X. Schrauth,
• Sofia Dembski,
• Daniel Haddad,
• Bernd Ahrens,
• Stefan Schweizer,
• Bastian Christ,
• Alevtina Cubukova,
• Marco Metzger,
• Heike Walles,
• Peter M. Jakob and
• Gerhard Sextl

Beilstein J. Nanotechnol. 2017, 8, 1484–1493, doi:10.3762/bjnano.8.148

• synthesis and determine the long-term stability of the CAs. No cytotoxicity of NP concentrations between 0.5 and 1 mg·mL−1 was observed after exposure to human dermal fibroblasts over 24 h. Overall this study shows, that the CaF2:(Tb3+,Gd3+) NPs are suitable for medical imaging. Keywords: calcium fluoride

• is to create multifunctional NPs by precipitation and simultaneous doping of the NP matrix with various ions [8][9]. Due to their co-doping with lanthanide ions, NPs on the basis of calcium phosphate or gadolinium oxide are also detectable by MRI and PL [10][11][12][13]. In recent years, fluorides

• biocompatible agents for bone and teeth reconstruction [23]. Calcium fluoride exhibits a wide transparent spectral window (190–1100 nm), large band gap (approx. 12 eV), low refractive index and low phonon energy [14]. Because of the high stability and flexibility of the fluorite structure, a number of various