Pathway economy in cyclization of 1,n-enynes

• Hezhen Han,
• Wenjie Mao,
• Bin Lin,
• Maosheng Cheng,
• Lu Yang and
• Yongxiang Liu

Beilstein J. Org. Chem. 2025, 21, 2260–2282, doi:10.3762/bjoc.21.173

• distinct from those generated through thermal Diels–Alder cycloaddition of (Z)-100. However, when [ReCl(CO)5] was used as the catalyst, a regioselective C–H bond insertion pathway was observed for substrate (E)-100, leading to the formation of tricyclic products 104 and 105 (Scheme 21, path b). This

• pathway changed significantly. The (E)-benzofulvene product 110 was exclusively generated through palladium-catalyzed C–H activation followed by a 5-exo-dig cyclization (Scheme 22, path b). This study established a general method for the divergent syntheses of phenylnaphthalenes and benzofulvenes from

Electrochemical cyclization of alkynes to construct five-membered nitrogen-heterocyclic rings

• Lifen Peng,
• Ting Wang,
• Zhiwen Yuan,
• Bin Li,
• Zilong Tang,
• Xirong Liu,
• Hui Li,
• Guofang Jiang,
• Chunling Zeng,
• Henry N. C. Wong and
• Xiao-Shui Peng

Beilstein J. Org. Chem. 2025, 21, 2173–2201, doi:10.3762/bjoc.21.166

• -involved ureas, annulation of o-arylalkynylanilines, cyclization of 2-ethynylanilines, selenocyclization of diselenides with 2-ethynylanilines as well as C–H indolization of 2-alkynylanilines with 3-functionalized indoles. Isoindolones were synthesized successfully by electrochemical annulation of

• Sindhu in 2022 [98] and sustainable syntheses of heterocycles from alkyne annulations through C–H activations were reported by Ackermann in 2024 [111]. Although few examples about the electrochemical formation of five-membered rings from alkynes were included in the above reviews [106][111], a systemic

• reversible C–H activation to give the six-membered intermediate C. Substitution of the acetate ligand in C by 3 caused the generation of complex D. The six-membered ruthenacycle E was then obtained by migratory insertion of acetylene into the Ru–C bond. Finally, reductive elimination of E formed the target

The application of desymmetric enantioselective reduction of cyclic 1,3-dicarbonyl compounds in the total synthesis of terpenoid and alkaloid natural products

• Dong-Xing Tan and
• Fu-She Han

Beilstein J. Org. Chem. 2025, 21, 2085–2102, doi:10.3762/bjoc.21.164

• intramolecular Diels–Alder reaction generated tricyclo[3.2.1.02,7]-octene 113. A two-step transformation including HAT hydrogenation and acetal C–H oxidation with RuCl3/NaIO4, 113 was converted into ketoester 114. The TFA-mediated C13–C15 bond cleavage of 114 proceed smoothly to give ring-opening products, which

Discovery of cytotoxic indolo[1,2-c]quinazoline derivatives through scaffold-based design

• Daniil V. Khabarov,
• Valeria A. Litvinova,
• Lyubov G. Dezhenkova,
• Dmitry N. Kaluzhny,
• Alexander S. Tikhomirov and
• Andrey E. Shchekotikhin

Beilstein J. Org. Chem. 2025, 21, 2062–2071, doi:10.3762/bjoc.21.161

• methodologies from traditional acylation/carbamoylation [9] to advanced Pd- or Rh-catalyzed C–H activation [10][11], FeIII–CuII/p-TSA–CuI catalyzed ring expansion/cyclization [12], electrochemical C–H/N–H functionalization [13], RhIII-catalyzed C–H amidation [14], etc. In contrast to chemical studies, a

Bioinspired total syntheses of natural products: a personal adventure

• Zhengyi Qin,
• Yuting Yang,
• Nuran Yan,
• Xinyu Liang,
• Zhiyu Zhang,
• Yaxuan Duan,
• Huilin Li and
• Xuegong She

Beilstein J. Org. Chem. 2025, 21, 2048–2061, doi:10.3762/bjoc.21.160

• reported. A bioinspired approach represents many advantages to bring benefits to total synthesis. It could rapidly achieve complexity of the target molecule from a much simpler precursor in diverse forms of transformations such as cascade reaction, cycloaddition, and C–H functionalization, thereby, shorten

• functionalities in a complex framework are formidable challenges for mankind since such transformations in nature are precisely induced by enzymes. Bioinspired functionalization of C–H bond in total synthesis is rarely developed and it represents another challenge, despite numerous methodologies have been

Measuring the stereogenic remoteness in non-central chirality: a stereocontrol connectivity index for asymmetric reactions

• Ivan Keng Wee On,
• Yu Kun Choo,
• Sambhav Baid and
• Ye Zhu

Beilstein J. Org. Chem. 2025, 21, 1995–2006, doi:10.3762/bjoc.21.155

• atom is treated as a pseudo-tetrahedral center, with the metal regarded as one of the substituents. Accordingly, a C–H activation reaction that forms planar chiral ferrocenes [18] is assigned as [30] (Scheme 5A). For cyclophanes, if the bond formation or cleavage is on the stereogenic arene, the

• , asymmetric synthesis of “inherently chiral” macrocycles have gained growing attention [22]. Practically, such reactions that yield “inherently chiral” macrocycles can be treated similarly as planar chirality (Scheme 6). The synthesis of calix[4]arenes via C–H arylation [23] is [31] (Scheme 6A), following the

Photochemical reduction of acylimidazolium salts

• Michael Jakob,
• Nick Bechler,
• Hassan Abdelwahab,
• Fabian Weber,
• Janos Wasternack,
• Leonardo Kleebauer,
• Jan P. Götze and
• Matthew N. Hopkinson

Beilstein J. Org. Chem. 2025, 21, 1973–1983, doi:10.3762/bjoc.21.153

• spectrum also indicating the presence of significant amounts of the imidazolium salt IMeH+ (characteristic C2–H signal at δ = 8.94 ppm; 28%) and benzoate species (BzO−, ortho-C–H signals at δ = 7.98 ppm; 50%). To confirm the photocatalytic nature of the novel carbonyl reduction process, a series of control

Rhodium-catalysed connective synthesis of diverse reactive probes bearing S(VI) electrophilic warheads

• Scott Rice,
• Julian Chesti,
• William R. T. Mosedale,
• Megan H. Wright,
• Stephen P. Marsden,
• Terry K. Smith and
• Adam Nelson

Beilstein J. Org. Chem. 2025, 21, 1924–1931, doi:10.3762/bjoc.21.150

• -substrates with the potential to react with metal carbenoids in many different ways [14], for example through O–H, N–H or formal C–H insertion, cyclopropanation, or oxazole [20] formation. The 16 co-substrates, selected from available compounds in our laboratory, are shown in Figure 2 (panel A). Many of

• these substrates had more than one potentially reactive site to enable, for example, O–H insertion (C1–5, C8, C11 and C14), N–H insertion (C3, C6, C12, C13 and C15), formal C–H insertion (C1, C3, C4, C12, C15 and C16), oxazole formation (C9 and C10) and cyclopropanation (C7, C10, C14 and C16). To start

• amine (→ 4-18); cyclopropanation (→ 2-7); and formal C–H insertion into an indole (→ 1-15a and 2-15a) or naphthol (→ 2-4 and 3-4b). In the case of 4 (2-naphthol) and 15 (5-methoxyindole), co-substrates containing functional groups with more than one potentially reactive site, two regioisomeric products

Chiral phosphoric acid-catalyzed asymmetric synthesis of helically chiral, planarly chiral and inherently chiral molecules

• Wei Liu and
• Xiaoyu Yang

Beilstein J. Org. Chem. 2025, 21, 1864–1889, doi:10.3762/bjoc.21.145

• enantioselectivity, with an s-factor up to >259 (Scheme 7). Notably, this reaction did not produce the typical arene C–H amination products but instead the dearomative amination products 26, which is believed to be due to the significant steric hindrance surrounding the amination site that impeded the subsequent

• CPA 6 (10 mol %) led to efficient kinetic resolution, yielding both the para-C–H amination product 49a and the recovered starting material (Rp)-48a with high enantioselectivity (Scheme 14). Notably, subjecting 49a to strongly basic conditions resulted in dehydrazidation to give (Sp)-48a, and thus

• -meta- (48f,g) and pseudo-para-substituted ones (see 48h,i). Furthermore, this method could also be utilized for the enantioselective desymmetrization of achiral diamido-substituted [2.2]paracyclophane substrate 50, delivering the C–H amination product 51 with excellent enantioselectivity (99% ee

Photoswitches beyond azobenzene: a beginner’s guide

• Michela Marcon,
• Christoph Haag and
• Burkhard König

Beilstein J. Org. Chem. 2025, 21, 1808–1853, doi:10.3762/bjoc.21.143

Fe-catalyzed efficient synthesis of 2,4- and 4-substituted quinolines via C(sp²)–C(sp²) bond scission of styrenes

• Prafull A. Jagtap,
• Manish M. Petkar,
• Vaishnavi R. Sawant and
• Bhalchandra M. Bhanage

Beilstein J. Org. Chem. 2025, 21, 1799–1807, doi:10.3762/bjoc.21.142

• -disubstituted and 4-substituted quinoline molecules. The developed strategy involves an earth-abundant Fe-catalyzed C(sp2)–C(sp2) bond cleavage of styrene, followed by the hydroamination of the cleaved synthons with arylamines and subsequent C–H annulation to yield two valuable quinoline derivatives. Key

• activation; C–H annulation; iron metal catalysis; quinolines; styrene; Introduction Quinolines are one of the essential heteroaromatic motifs that play a crucial role across diverse scientific fields due to their wide range of applications. In contemporary medicine, quinoline derivatives frequently appear

• [53]. In this work, the authors used a stoichiometric amount of Zn(OTf)3 as a Lewis acid catalyst and air as the oxidant for the reaction. Jana and colleagues demonstrated an atom-efficient pseudo-three-component C–H annulation reaction catalyzed by Yb and Cu, which involved nitrosoarenes and styrene

Research progress on calixarene/pillararene-based controlled drug release systems

• Liu-Huan Yi,
• Jian Qin,
• Si-Ran Lu,
• Liu-Pan Yang,
• Li-Li Wang and
• Huan Yao

Beilstein J. Org. Chem. 2025, 21, 1757–1785, doi:10.3762/bjoc.21.139

Continuous-flow-enabled intensification in nitration processes: a review of technological developments and practical applications over the past decade

• Feng Zhou,
• Chuansong Duanmu,
• Yanxing Li,
• Jin Li,
• Haiqing Xu,
• Pan Wang and
• Kai Zhu

Beilstein J. Org. Chem. 2025, 21, 1678–1699, doi:10.3762/bjoc.21.132

• selective mono- or di-nitration and facilitates late-stage C–H nitration of biorelevant molecules, with DFT/mechanistic studies revealing synergistic 'nitro effect' and 'methyl effect' underlying the reactivity [7]. Jia et al. developed dinitro-5,5-dimethylhydantoin (DNDMH) as an efficient arene nitration

Transition-state aromaticity and its relationship with reactivity in pericyclic reactions

• Israel Fernández

Beilstein J. Org. Chem. 2025, 21, 1613–1626, doi:10.3762/bjoc.21.125

• diatropic (i.e., aromatic) ring current observed upon applying the anisotropy of the induced current density (ACID) method [78] or the delocalization observed with the EDDB method (see Figure 5 for the parent process involving the reaction between ethane and ethene). Typically, DGRTs involving C–H bonds are

• TS-aromaticity and the barrier heights. The origin of the computed decrease of the activation barrier in the CH3–OH to O=CH2 as compared to the analogous reaction involving ethane as hydrogen donor can be initially traced to different C–H vs O–H bond strengths. Indeed, we found that the total bond

• analysis (b) of the DGRT between ethane and formaldehyde (black lines) and the analogous process involving methanol (red lines) and projected onto the C···H bond-forming distance. AICD plots of the transition states associated with the Hopf cyclization reactions involving cis-hexa-1,3-diene-5-yne (a) and

Azide–alkyne cycloaddition (click) reaction in biomass-derived solvent Cyrene^TM under one-pot conditions

• Zoltán Medgyesi and
• László T. Mika

Beilstein J. Org. Chem. 2025, 21, 1544–1551, doi:10.3762/bjoc.21.117

• , a wide range of organic reactions, e.g., urea and amide formation [32][33], amide coupling [34], aldol condensation [35], C–H difluoromethylation [36], aromatic substitution [37], and MOFs synthesis [38] were demonstrated in CyreneTM. Very recently, Fasano and Citarella first reported a CuAAC

Heterologous biosynthesis of cotylenol and concise synthesis of fusicoccane diterpenoids

• Ye Yuan,
• Zhenhua Guan,
• Xue-Jie Zhang,
• Nanyu Yao,
• Wenling Yuan,
• Yonghui Zhang,
• Ying Ye and
• Zheng Xiang

Beilstein J. Org. Chem. 2025, 21, 1489–1495, doi:10.3762/bjoc.21.111

• activity than cotylenin A in cell growth inhibition assays and less toxicity in single-agent treatments [27][28]. Recently, Jiang and Renata described a chemoenzymatic approach that combines the skeletal construction by chemical methods and enzymatic C–H oxidations [29]. The synthesis employs a catalytic

Copper catalysis: a constantly evolving field

• Elena Fernández and
• Jaesook Yun

Beilstein J. Org. Chem. 2025, 21, 1477–1479, doi:10.3762/bjoc.21.109

• straightforward reactions. Complementarily, the Review article by Jang and Kim provides a deep understanding of recent advances in the combination of electrochemistry and copper catalysis for various organic transformations [3]. Their contribution elaborates various C–H functionalizations, olefin additions

• -workers demonstrates that the efficient and green direct C–H amination of benzoxazoles can be catalyzed by copper chloride salts in acetonitrile in the absence of any acidic, basic, or oxidizing additives [8]. Both CuCl and CuCl2 were found to be extremely efficient in promoting the reactions, which

Microwave-enhanced additive-free C–H amination of benzoxazoles catalysed by supported copper

• Andrei Paraschiv,
• Valentina Maruzzo,
• Filippo Pettazzi,
• Stefano Magliocco,
• Paolo Inaudi,
• Daria Brambilla,
• Gloria Berlier,
• Giancarlo Cravotto and
• Katia Martina

Beilstein J. Org. Chem. 2025, 21, 1462–1476, doi:10.3762/bjoc.21.108

• offers wide-ranging potential for substrate expansion and the functionalisation of bioactive compounds. This study presents a green and efficient C–H amination, catalysed by CuCl and CuCl2, in acetonitrile without acidic, basic or oxidant additives that is accelerated by microwave (MW) irradiation and is

• , and the huge overall economic impact of these processes. Inspired by the logic behind cross-dehydrogenative C–C-coupling methods [15], the direct C–H amination has been developed as a more straightforward, economical and environmentally friendly reaction, compared to its counterparts (such as the

• classical Buchwald–Hartwig amination reaction [16] or the Ullman reaction [17][18]) which require pre-functionalisation steps and harsh conditions [19]. Many protocols for C–H aminations have been applied to heteroaromatic compounds, mainly 5-membered heteroarenes, and a great deal of attention has been

Advances in nitrogen-containing helicenes: synthesis, chiroptical properties, and optoelectronic applications

• Meng Qiu,
• Jing Du,
• Nai-Te Yao,
• Xin-Yue Wang and
• Han-Yuan Gong

Beilstein J. Org. Chem. 2025, 21, 1422–1453, doi:10.3762/bjoc.21.106

• stimuli-responsive chiral electrochromic materials. In the same year, You’s group developed a transition-metal-catalyzed C–H/C–H-type regioselective C3-arylation of benzothiophenes using molecular oxygen as the oxidant [79]. This strategy afforded the TADF-active compound 64a, which exhibits efficient

Reactions of acryl thioamides with iminoiodinanes as a one-step synthesis of N-sulfonyl-2,3-dihydro-1,2-thiazoles

• Vladimir G. Ilkin,
• Pavel S. Silaichev,
• Valeriy O. Filimonov,
• Tetyana V. Beryozkina,
• Margarita D. Likhacheva,
• Pavel A. Slepukhin,
• Wim Dehaen and
• Vasiliy A. Bakulev

Beilstein J. Org. Chem. 2025, 21, 1397–1403, doi:10.3762/bjoc.21.104

• involved in the formation of a weak intermolecular hydrogen bond of the C‒H···N≡C type with distances H(3)···N(3) 2.53(3) Å, C(3)···N(3) 3.436(4) Å and angle C(3)H(3)N(3) 157(2)° (symmetry transformation [1−x, 1−y, 1−z]). Conclusion Thus, we found that thioamides of acrylic acid easily interact with

• -hydrogen atoms. The H-atoms in C–H bonds are placed in the calculated positions and refined in the "rider" model in the isotropic approximation. CCDC 2401684 (3aa) contains the supplementary crystallographic data for this paper. These data can be obtained free of charge via https://www.ccdc.cam.ac.uk (or

Oxetanes: formation, reactivity and total syntheses of natural products

• Peter Gabko,
• Martin Kalník and
• Maroš Bella

Beilstein J. Org. Chem. 2025, 21, 1324–1373, doi:10.3762/bjoc.21.101

• methods for oxetane synthesis, mainly due to its practicality and versatility. 1.1.1.1 Substitution of a leaving group: In 2017, Moody et al. developed a new route towards spiro-oxetanes 8 utilising a combination of 1,4-C–H insertion and Williamson etherification (Scheme 3) [38]. The methodology commences

• with alcohol C–H functionalisation, thus creating a unique synthetic strategy towards oxetane formation that avoids tedious multistep substrate preparations (Scheme 7) [42]. It can be initiated from simple, unactivated primary or secondary alcohols, tolerates various functional groups such as acetals

Recent advances in amidyl radical-mediated photocatalytic direct intermolecular hydrogen atom transfer

• Hao-Sen Wang,
• Lin Li,
• Xin Chen,
• Jian-Li Wu,
• Kai Sun,
• Xiao-Lan Chen,
• Ling-Bo Qu and
• Bing Yu

Beilstein J. Org. Chem. 2025, 21, 1306–1323, doi:10.3762/bjoc.21.100

• transfer (HAT) in photocatalytic reactions. These radicals display exceptional selectivity and efficiency in abstracting hydrogen atoms from C–H, Si–H, B–H, and Ge–H, positioning them as invaluable tools in synthetic chemistry. This review summarizes the latest advancements in the photocatalyzed generation

• substrates. Keywords: amidyl radicals; C–H; HAT reagents; hydrogen-atom-transfer; late-stage functionalization; Introduction C–H bonds are the predominant chemical bonds in organic compounds, and their direct conversion can rapidly and efficiently increase the complexity and functionality of organic

• molecules. On the other hand, C–H bonds exhibit low reactivity due to their relatively high bond dissociation energy (BDE) (Figure 1a). Therefore, the direct functionalization of C–H bonds is extremely challenging [1][2][3][4][5]. In recent decades, transition-metal-catalyzed C–H bond functionalization

Recent advances and future challenges in the bottom-up synthesis of azulene-embedded nanographenes

• Bartłomiej Pigulski

Beilstein J. Org. Chem. 2025, 21, 1272–1305, doi:10.3762/bjoc.21.99

• counterparts. Moreover, the azulene-like electronic structure is preserved, leading PAHs 57a–d and 60 to display characteristic low-energy azulene absorption and anti-Kasha emission. Intramolecular C–H arylation: Various C–H arylation strategies have proven to be effective as the final step in the synthesis of

• azulene-embedded PAHs. This approach requires a halogen-functionalized precursor and typically employs a palladium catalyst. Dou and co-workers reported a last-stage intramolecular C–H arylation of substituted indenofluorenes 61 and 62 (Scheme 10) [57]. The palladium-catalysed reaction yielded fused

• ]. Interestingly, initial attempts to convert 65 into 66 using various procedures for the palladium-catalysed C–H activation were unsuccessful, even when conducted at elevated temperatures. However, treatment of 65 with KOH in refluxing quinoline successfully yielded the desired PAH 66, albeit in a modest 15

Recent advances in oxidative radical difunctionalization of N-arylacrylamides enabled by carbon radical reagents

• Jiangfei Chen,
• Yi-Lin Qu,
• Ming Yuan,
• Xiang-Mei Wu,
• Heng-Pei Jiang,
• Ying Fu and
• Shengrong Guo

Beilstein J. Org. Chem. 2025, 21, 1207–1271, doi:10.3762/bjoc.21.98

• primarily focused on substrates containing activated alkenes tethered within the molecular framework. N-Arylacrylamides were employed as model substrates, and a diverse range of functionalization reagents, including those with benzylic C–H bonds, C(sp3)–H bonds adjacent to heteroatoms, di

• activated alkenes involving benzylic C(sp3)–H bonds through a cascade cyclization process (Scheme 1) [2]. This organomediated approach can be facilitated by a catalytic amount of Lewis acid. Using DTBP as the oxidant and IrCl3 as the promoter, a range of benzylic C–H bonds in arylmethanes

• mechanism, control experiments were conducted. The addition of radical scavengers such as BHT and TEMPO significantly inhibited the reaction, confirming the involvement of a radical intermediate. Kinetic isotope effect (KIE) studies showed a KIE of 1.0, suggesting that C–H-bond cleavage was not the rate

Enhancing chemical synthesis planning: automated quantum mechanics-based regioselectivity prediction for C–H activation with directing groups

• Julius Seumer,
• Nicolai Ree and
• Jan H. Jensen

Beilstein J. Org. Chem. 2025, 21, 1171–1182, doi:10.3762/bjoc.21.94

• Julius Seumer Nicolai Ree Jan H. Jensen Department of Chemistry, University of Copenhagen, Copenhagen, Denmark 10.3762/bjoc.21.94 Abstract The mild and selective functionalization of carbon–hydrogen (C–H) bonds remains a pivotal challenge in organic synthesis, crucial for developing complex

• molecular architectures in pharmaceuticals, polymers, and agrochemicals. Despite advancements in directing group (DG) methodologies and computational approaches, predicting accurate regioselectivity in C–H activation poses significant difficulties due to the diversity and complexity of organic compounds

• . This study introduces a novel quantum mechanics-based computational workflow tailored for the regioselective prediction of C–H activation in the presence of DGs. Utilizing (semi-empirical) quantum calculations hierarchically, the workflow efficiently predicts outcomes by considering concerted