Removal of toxic heavy metals from river water samples using a porous silica surface modified with a new β-ketoenolic host

• Said Tighadouini,
• Smaail Radi,
• Abderrahman Elidrissi,
• Khadija Haboubi,
• Maryse Bacquet,
• Stéphanie Degoutin,
• Mustapha Zaghrioui and
• Yann Garcia

Beilstein J. Nanotechnol. 2019, 10, 262–273, doi:10.3762/bjnano.10.25

• thermodynamical properties including pH, adsorption isotherms, competitive adsorption, selectivity and regeneration were studied to investigate the effect of ketoenol–pyridine–furan–silica (SiNL) on the removal of Zn(II), Pb(II), Cd(II) and Cu(II) from aqueous solutions. An increase in adsorption as a function of

• from polluted media have been thus proposed. These include several well-known analytical chemistry methods [6][7][8][9][10][11][12][13][14][15][16] as well as adsorption materials able to extract metal ions from aqueous solutions [17][18][19][20][21][22][23]. However, this latter solution presents

• , zinc and copper metal ions from aqueous solutions as well as in natural water samples. Experimental Synthesis Solvents and chemicals, used without further purification, were of analytical grade (Aldrich, 99.5% purity). Silica gel (particle size of 70–230 mesh, median pore diameter of 60 Å) (E. Merck

Raman study of flash-lamp annealed aqueous Cu₂ZnSnS₄ nanocrystals

• Yevhenii Havryliuk,
• Oleksandr Selyshchev,
• Mykhailo Valakh,
• Alexandra Raevskaya,
• Oleksandr Stroyuk,
• Constance Schmidt,
• Volodymyr Dzhagan and
• Dietrich R. T. Zahn

Beilstein J. Nanotechnol. 2019, 10, 222–227, doi:10.3762/bjnano.10.20

• were prepared in aqueous solutions by the reaction of a mixture of mercaptoacetate (MA) complexes of Cu(II), Sn(II), and Zn(II) with sodium sulfide and a subsequent optional heat treatment at about 95 °C. An XPS study reported in [21] showed all the elements of CZTS to be present in the expected

Uniform Sb₂S₃ optical coatings by chemical spray method

• Jako S. Eensalu,
• Atanas Katerski,
• Erki Kärber,
• Ilona Oja Acik,
• Arvo Mere and
• Malle Krunks

Beilstein J. Nanotechnol. 2019, 10, 198–210, doi:10.3762/bjnano.10.18

• -deposited Sb2S3 by pneumatically spraying aqueous solutions (tartaric acid added as complexing agent to prevent hydrolysis [10], akin to studies by Rajpure et al. [11]) or methanolic solutions of SbCl3. Following, we studied the effect of the Sb/S precursor molar ratio in solution on ultrasonically sprayed

New micro/mesoporous nanocomposite material from low-cost sources for the efficient removal of aromatic and pathogenic pollutants from water

• Emmanuel I. Unuabonah,
• Robert Nöske,
• Jens Weber,
• Christina Günter and
• Andreas Taubert

Beilstein J. Nanotechnol. 2019, 10, 119–131, doi:10.3762/bjnano.10.11

• interesting both from stability and surface area aspects. Pollutant removal from aqueous solutions Removal of 4-nitrophenol We have previously reported that a first-generation HYCA material prepared via a low-temperature calcination process in air very efficiently adsorbs cationic pollutants such as Pb2+, Cd2

• when aqueous solutions with 4-nitrophenol concentrations of 1 mg/L were used. Moreover, a 50% breakthrough was reached at ≈900 min after treating 9 L of the same solution, and the 2Z-HYCA@650 °C was 100% spent after 28 h 40 min. This result demonstrates that 2Z-HYCA is a highly effective adsorbent for

The nanoscaled metal-organic framework ICR-2 as a carrier of porphyrins for photodynamic therapy

• Jan Hynek,
• Sebastian Jurík,
• Martina Koncošová,
• Jaroslav Zelenka,
• Ivana Křížová,
• Tomáš Ruml,
• Kaplan Kirakci,
• Ivo Jakubec,
• František Kovanda,
• Kamil Lang and
• Jan Demel

Beilstein J. Nanotechnol. 2018, 9, 2960–2967, doi:10.3762/bjnano.9.275

• Inorganic Chemistry Rez) constructed from Fe3+ and phenylene-1,4-bis(methylphosphinic acid) (PBPA) linkers [25]. ICR-2 in the microcrystalline form is stable in aqueous solutions even at high temperatures and partly retains its structure and porosity even after treatment with phosphate buffer saline (PBS

Comparative biological effects of spherical noble metal nanoparticles (Rh, Pd, Ag, Pt, Au) with 4–8 nm diameter

• Alexander Rostek,
• Marina Breisch,
• Kevin Pappert,
• Kateryna Loza,
• Marc Heggen,
• Manfred Köller,
• Christina Sengstock and
• Matthias Epple

Beilstein J. Nanotechnol. 2018, 9, 2763–2774, doi:10.3762/bjnano.9.258

• = 40,000 g mol−1), sodium borohydride (Sigma-Aldrich, ≥96%, p.a.) trisodium citrate (Acros, anhydrous 98%), tannic acid (Fluka, p.a.), and D-glucose (Baker, p.a.) were all used as obtained. Aqueous solutions of H2PtCl6 or HAuCl4 (prepared by dissolution of platinum or gold in aqua regia), RhCl3, NaPdCl4

• -octadecene, OAm) [68], or in aqueous solutions. Depending on the additives and the reaction conditions, a variety of different shapes and sizes can be realized [66][67][69][70][71][72][73][74]. The generation of small silver nanoparticles (3–6 nm) is often performed only to generate seeds as a precursor for

Size-selected Fe₃O₄–Au hybrid nanoparticles for improved magnetism-based theranostics

• Maria V. Efremova,
• Yulia A. Nalench,
• Eirini Myrovali,
• Anastasiia S. Garanina,
• Ivan S. Grebennikov,
• Polina K. Gifer,
• Maxim A. Abakumov,
• Marina Spasova,
• Makis Angelakeris,
• Alexander G. Savchenko,
• Michael Farle,
• Natalia L. Klyachko,
• Alexander G. Majouga and
• Ulf Wiedwald

Beilstein J. Nanotechnol. 2018, 9, 2684–2699, doi:10.3762/bjnano.9.251

• acquisition. Figure 6A depicts a set of two hyperthermia sequences, composed of a heating (magnetic field is switched on) and a cooling stage (magnetic field is switched off), for two aqueous solutions, respectively. It is apparent that there is a critical magnetite size that renders such structures suitable

Enhancement of X-ray emission from nanocolloidal gold suspensions under double-pulse excitation

• Wei-Hung Hsu,
• Frances Camille P. Masim,
• Armandas Balčytis,
• Hsin-Hui Huang,
• Tetsu Yonezawa,
• Aleksandr A. Kuchmizhak,
• Saulius Juodkazis and
• Koji Hatanaka

Beilstein J. Nanotechnol. 2018, 9, 2609–2617, doi:10.3762/bjnano.9.242

• laser and plasmonic nanoparticles will contribute to a broad field of applications ranging from pulsed X-ray generation to energetic particle sources [14] or terahertz wave emission from aqueous solutions [16]. In recent experimental studies, intense fs-laser excitation of plasmonic gold nanoparticles

• solution surface for different Δt up to 15 ns [28]. Analyses of the relation between the time-dependent X-ray generation and the optimum laser irradiation position are still missing for other aqueous solutions, especially for experiments under ambient pressure. Previous studies, mostly with solid targets

Non-agglomerated silicon–organic nanoparticles and their nanocomplexes with oligonucleotides: synthesis and properties

• Asya S. Levina,
• Marina N. Repkova,
• Nadezhda V. Shikina,
• Zinfer R. Ismagilov,
• Svetlana A. Yashnik,
• Dmitrii V. Semenov,
• Yulia I. Savinovskaya,
• Natalia A. Mazurkova,
• Inna A. Pyshnaya and
• Valentina F. Zarytova

Beilstein J. Nanotechnol. 2018, 9, 2516–2525, doi:10.3762/bjnano.9.234

• conjugated with oligodeoxyribonucleotides (ODN) through the binding to the negatively charged internucleotide phosphate groups to form Si–NH2·ODN complexes. Like Si–NH2, the Si–NH2·ODN nanocomplexes are dissolved in aqueous solutions. The addition of NaCl did not lead to precipitation. Si–NH2 and Si–NH2·ODN

• Si–NH2·ODN nanocomplexes were characterized by physico-chemical methods. The proposed nanocomplexes appeared to form very small nanoparticles (which are dissolved in aqueous solutions), then penetrate into the cellular cytoplasm to deliver oligonucleotides to the nucleus. The main advantage of the

• proposed Si–NH2 nanoparticles and Si–NH2·ODN nanocomplexes is that they are not prone to aggregation and form true aqueous solutions. The Si–NH2·ODN nanocomplexes exhibit biological activity, which has been shown with an example of the inhibition of influenza A virus replication. The proposed nanocomplexes

ZnO-nanostructure-based electrochemical sensor: Effect of nanostructure morphology on the sensing of heavy metal ions

• Marina Krasovska,
• Vjaceslavs Gerbreders,
• Irena Mihailova,
• Andrejs Ogurcovs,
• Eriks Sledevskis,
• Andrejs Gerbreders and
• Pavels Sarajevs

Beilstein J. Nanotechnol. 2018, 9, 2421–2431, doi:10.3762/bjnano.9.227

• , using aqueous solutions of Pb(NO3)2 and Cd(NO3)2 as analytes with different concentrations. It was found that the sensitivity of the resulting electrochemical sensors depends on the morphology of the ZnO nanostructures: the best results were achieved in the case of porous nanostructures (nanotubes and

• were carried out using these nanostructured ZnO coatings on the working electrodes using aqueous solutions of Pb(NO3)2 and Cd(NO3)2 as analytes with different concentrations. Experimental Design and fabrication of the ZnO nanostructure-based electrochemical sensor Three morphologies of well-aligned one

• -dimensional ZnO nanostructures were selected for the experiment: nanorods, nanoneedles and nanotubes. The samples were prepared according to the following description. Glass slides (76 × 26 × 1 mm) were precleaned via ultrasonication in aqueous solutions of KOH and H2SO4, followed by several rinses with

Droplet-based synthesis of homogeneous magnetic iron oxide nanoparticles

• Christian D. Ahrberg,
• Ji Wook Choi and
• Bong Geun Chung

Beilstein J. Nanotechnol. 2018, 9, 2413–2420, doi:10.3762/bjnano.9.226

• oxide nanoparticles Nanoparticles were synthesized using a coprecipitation reaction as previously described [17]. Briefly, two aqueous solutions were mixed. The first solution contained 0.06 M of FeCl3·6H2O (Alfa Aesar, USA) and 0.03 M of FeCl2∙4H2O (Sigma-Aldrich, USA) dissolved in water. The second

Nanotribology

• Enrico Gnecco,
• Susan Perkin,
• Andrea Vanossi and
• Ernst Meyer

Beilstein J. Nanotechnol. 2018, 9, 2330–2331, doi:10.3762/bjnano.9.217

• India, China, Argentina, Cameroon, Russia and USA back to many countries in Old Europe). The covered topics include lubrication, surface preparation and theoretical models of friction at the nanoscale. Regarding the first topic, this Thematic Series gives examples of cutting-edge aqueous solutions

Nanoconjugates of a calixresorcinarene derivative with methoxy poly(ethylene glycol) fragments for drug encapsulation

• Alina M. Ermakova,
• Julia E. Morozova,
• Yana V. Shalaeva,
• Victor V. Syakaev,
• Aidar T. Gubaidullin,
• Alexandra D. Voloshina,
• Vladimir V. Zobov,
• Irek R. Nizameev,
• Olga B. Bazanova,
• Igor S. Antipin and
• Alexander I. Konovalov

Beilstein J. Nanotechnol. 2018, 9, 2057–2070, doi:10.3762/bjnano.9.195

• fragments [32] and appear due to the reaction conditions (see Experimental section). Because of the presence of mPEG groups, compound 3 can be considered a non-ionic surfactant. It is known, that in aqueous solutions of non-ionic surfactants increasing temperatures leads to phase separation. There are two

• , Supporting Information File 1). The solubilisation of Orange OT and QC in aqueous solutions of 3 and mPEG-550 demonstrated the advantage of the macrocycle in the encapsulation of these substrates (Figure 5a,b). UV–vis spectra of the obtained solutions showed a significant increase of the solubility of

• = 1.5418 Å, (b) Guinier plot ln(I) as a function of s2 with linear regression of the curve; Rg = 53.5 ± 1.8 Å, I(0) = 531 ± 18, r = 0.98. (a) The intensity-averaged particle size distribution of aqueous solutions of 3 at different concentrations; (b, c) TEM images of particles of 3, scale bars: (b) 500 nm

Fabrication of photothermally active poly(vinyl alcohol) films with gold nanostars for antibacterial applications

• Mykola Borzenkov,
• Maria Moros,
• Claudia Tortiglione,
• Serena Bertoldi,
• Nicola Contessi,
• Silvia Faré,
• Angelo Taglietti,
• Agnese D’Agostino,
• Piersandro Pallavicini,
• Maddalena Collini and
• Giuseppe Chirico

Beilstein J. Nanotechnol. 2018, 9, 2040–2048, doi:10.3762/bjnano.9.193

• surfactants, they were coated with either SH-PEG5000–OCH3 or SH-PEG5000–COOH before being incorporated in the PVA matrix, as PEGylation of gold nanostars leads to enhanced stability [9][10] and complete surfactant removal [6][8].The aqueous solutions of PEGylated GNSs were prepared with 0.6 mg/mL Au

• by spectrophotometric measurements as explained before. At least two biological replicas were conducted to calculate the mean and standard deviation. Statistical analysis was performed using GraphPad Prism v.6. Extinction spectra of aqueous solutions of PEGylated GNSs (A) and the PVA-GNS film (B

A visible-light-controlled platform for prolonged drug release based on Ag-doped TiO₂ nanotubes with a hydrophobic layer

• Caihong Liang,
• Jiang Wen and
• Xiaoming Liao

Beilstein J. Nanotechnol. 2018, 9, 1793–1801, doi:10.3762/bjnano.9.170

• , toluene, oxydol, NaBH4, AgNO3, and Zn(AC)2 were purchased from KeLong Chemical (AR, Chengdu, China). Other chemical reagents used in these experiments were of analytical grade and were used directly without further purification. Deionized (DI) water was used to clean and prepare aqueous solutions

Uniform cobalt nanoparticles embedded in hexagonal mesoporous nanoplates as a magnetically separable, recyclable adsorbent

• Can Zhao,
• Yuexiao Song,
• Tianyu Xiang,
• Wenxiu Qu,
• Shuo Lou,
• Xiaohong Yin and
• Feng Xin

Beilstein J. Nanotechnol. 2018, 9, 1770–1781, doi:10.3762/bjnano.9.168

• ) has proved to be one of the most effective strategies for enhancing their adsorption performance in aqueous solutions [10][11][12]. Torad et al. [13] reported the high adsorption capacity of porous carbon particles with magnetic Co nanoparticles towards methylene blue (MB) dye. They attributed this to

• used as an adsorbent for efficient removal of RhB dye from aqueous solutions. As illustrated in Scheme 1, firstly, CoAl LDH is synthesized with urea through a hydrothermal method. Subsequently, the LDH@PDA composite is obtained by coating CoAl LDH with PDA through self-polymerization of dopamine in

• . The volume of ethanol is 10 mL for 10 mg adsorbent each time. After the desorption process, the NPL samples are used for the removal of RhB from aqueous solutions for five cycles (Figure 9). It was found that the NPLs-2.5-800 adsorbent possesses the best adsorption capacity, where removal efficiency

Cryochemical synthesis of ultrasmall, highly crystalline, nanostructured metal oxides and salts

• Elena A. Trusova and
• Nikolai S. Trutnev

Beilstein J. Nanotechnol. 2018, 9, 1755–1763, doi:10.3762/bjnano.9.166

• possible for compact states [5][6][7]. Most often, aqueous solutions are used; however, solutions in organic solvents (e.g., acetic acid, benzene, tert-butanol, and toluene) can also be used when reasonable equilibrium pressure is applied in the solid state at low temperature. The low solubility of many

• inorganic salts in these solvents limits their application in cryochemical processing. Along with aqueous solutions, in the last few years the freezing of colloids (gels, suspensions) and precipitates has been increasingly used [8]. As a rule, salts solutions are treated by fast cooling [9]. For example

• , aqueous solutions of Al- and Fe-sulfates were used to obtain highly dispersed Al2O3 and Fe2O3 crystallites by a freeze-drying technique. The formation and growth of chain-like aggregates of crystallites was shown as a process followed the surface diffusion mechanism. It was observed that the orientation

Closed polymer containers based on phenylboronic esters of resorcinarenes

• Tatiana Yu. Sergeeva,
• Rezeda K. Mukhitova,
• Irek R. Nizameev,
• Marsil K. Kadirov,
• Polina D. Klypina,
• Albina Y. Ziganshina and
• Alexander I. Konovalov

Beilstein J. Nanotechnol. 2018, 9, 1594–1601, doi:10.3762/bjnano.9.151

• as p(SRA-B) but using aqueous solutions of the dyes (5 mM) instead of water. After the synthesis, D@p(SRA-B) were dialyzed for three days. The encapsulation efficiency (EE) of p(SRA-B) toward PTS and Fl is 9.3 and 9.6%, respectively (Table 2). Due to the poor solubility of Py in water and the

Interaction-tailored organization of large-area colloidal assemblies

• Silvia Rizzato,
• Elisabetta Primiceri,
• Anna Grazia Monteduro,
• Adriano Colombelli,
• Angelo Leo,
• Maria Grazia Manera,
• Roberto Rella and
• Giuseppe Maruccio

Beilstein J. Nanotechnol. 2018, 9, 1582–1593, doi:10.3762/bjnano.9.150

• % PSS and 2 wt % PAH by alternately dipping into the respective aqueous solutions for 5 min with intermediate rinses in distilled water (Figure 1a). Successively, the polystyrene spheres were assembled both onto bare (as reference) and functionalized substrates in a three-phase process. Initially, the

Ag₂WO₄ nanorods decorated with AgI nanoparticles: Novel and efficient visible-light-driven photocatalysts for the degradation of water pollutants

• Shijie Li,
• Shiwei Hu,
• Wei Jiang,
• Yanping Liu,
• Yu Liu,
• Yingtang Zhou,
• Liuye Mo and
• Jianshe Liu

Beilstein J. Nanotechnol. 2018, 9, 1308–1316, doi:10.3762/bjnano.9.123

• AgNO3 and Na2WO4 aqueous solutions at room temperature [37]. Subsequently, AgI nanoparticles were readily anchored onto Ag2WO4 nanorods via an in situ anion-exchange between I− in the solution and the lattice W2O42− in Ag2WO4. The resulting catalysts were denoted as 0.1AgI/Ag2WO4, 0.2AgI/Ag2WO4, 0.3AgI

• Sinopharm Chemical Reagent Ltd. and used as received. Ag2WO4 nanorods were prepared according to a previous report [41]. Briefly, AgNO3 (0.01 mol L−1, 100 mL) and Na2WO4 (0.005 mol L−1, 100 mL) aqueous solutions were first prepared. Then, the AgNO3 aqueous solution was slowly poured into Na2WO4 aqueous

Surface characterization of nanoparticles using near-field light scattering

• Eunsoo Yoo,
• Yizhong Liu,
• Chukwuazam A. Nwasike,
• Sebastian R. Freeman,
• Brian C. DiPaolo,
• Bernardo Cordovez and
• Amber L. Doiron

Beilstein J. Nanotechnol. 2018, 9, 1228–1238, doi:10.3762/bjnano.9.114

• SPIOs, PEG-SPIOs, and IPC-SPIOs. The relationship between nanoparticle coating properties and the velocity of particles in either water or aqueous solutions with varying salt concentrations were explored. We described analytical models explaining the effect of surface–waveguide interactions on the

Electrodeposition of reduced graphene oxide with chitosan based on the coordination deposition method

• Mingyang Liu,
• Yanjun Chen,
• Chaoran Qin,
• Zheng Zhang,
• Shuai Ma,
• Xiuru Cai,
• Xueqian Li and
• Yifeng Wang

Beilstein J. Nanotechnol. 2018, 9, 1200–1210, doi:10.3762/bjnano.9.111

• intensity ratio of the D to G-band can be employed to evaluate the structure disorder of carbon materials [30][31]. Thus, the Raman spectroscopy analysis of HACC-rGO suggests that there exist some structural defects in HACC-rGO. Particularly, the resulting HACC-rGO disperses well in aqueous solutions, and

Single-crystalline FeCo nanoparticle-filled carbon nanotubes: synthesis, structural characterization and magnetic properties

• Rasha Ghunaim,
• Maik Scholz,
• Christine Damm,
• Bernd Rellinghaus,
• Rüdiger Klingeler,
• Bernd Büchner,
• Michael Mertig and
• Silke Hampel

Beilstein J. Nanotechnol. 2018, 9, 1024–1034, doi:10.3762/bjnano.9.95

• CNTs [44][45]. 1 M standard aqueous solutions of the following nitrates have been prepared: Fe(NO3)3·9H2O (grade: ACS 99.0–100.2%) and Co(NO3)2·6H2O (grade: ACS 98.0–102.0% metal basis) supplied by VWR Chemicals and Alfa Aesar GmbH & Co KG (Karlsruhe, Germany). The nitrate salts were used as provided

Facile chemical routes to mesoporous silver substrates for SERS analysis

• Elina A. Tastekova,
• Alexander Y. Polyakov,
• Anastasia E. Goldt,
• Alexander V. Sidorov,
• Alexandra A. Oshmyanskaya,
• Irina V. Sukhorukova,
• Dmitry V. Shtansky,
• Wolgang Grünert and
• Anastasia V. Grigorieva

Beilstein J. Nanotechnol. 2018, 9, 880–889, doi:10.3762/bjnano.9.82

• face down in 5 cm over 10 mL of acid in a glass vessel. The film was treated for 10 min in vapor and then thoroughly washed with MilliQ pure water. The film, which changed in color, was then immersed into 100 mL of freshly prepared 0.1 M NaBH4 aqueous solutions of (the same concentration as was taken

Heavy-metal detectors based on modified ferrite nanoparticles

• Urszula Klekotka,
• Ewelina Wińska,
• Elżbieta Zambrzycka-Szelewa,
• Dariusz Satuła and
• Beata Kalska-Szostko

Beilstein J. Nanotechnol. 2018, 9, 762–770, doi:10.3762/bjnano.9.69

• Aqueous solutions of Cu, Cd, or Pb were prepared and added to the nanoparticles. The mixtures were vigorously mixed on a magnetic stirrer. Then, nanoparticles were removed and the concentrations of Cu, Cd, or Pb in the obtained solutions were analyzed using AAS. The data collected in Table 4 show the

• adsorption of heavy metals in comparison to unmodified particles, but not as efficiently as SA. To conclude, succinic anhydride may be a good potential modifier of the Mn0.5Fe2.5O4 particles to enhance the selective adsorption of heavy metal ions from aqueous solutions. Therefore, in future, experiments with