Green and scalable synthesis of nanocrystalline kuramite

• Andrea Giaccherini,
• Giuseppe Cucinotta,
• Stefano Martinuzzi,
• Enrico Berretti,
• Werner Oberhauser,
• Alessandro Lavacchi,
• Giovanni Orazio Lepore,
• Giordano Montegrossi,
• Maurizio Romanelli,
• Antonio De Luca,
• Massimo Innocenti,
• Vanni Moggi Cecchi,
• Matteo Mannini,
• Antonella Buccianti and
• Francesco Di Benedetto

Beilstein J. Nanotechnol. 2019, 10, 2073–2083, doi:10.3762/bjnano.10.202

• associated phases. Still, the compositional data of the final products require further consideration after a discussion of the results obtained with other characterization techniques. X-ray diffraction We performed a Rietveld refinement of the experimental patterns in the framework of the tetragonal CTS

Biocatalytic oligomerization-induced self-assembly of crystalline cellulose oligomers into nanoribbon networks assisted by organic solvents

• Yuuki Hata,
• Yuka Fukaya,
• Toshiki Sawada,
• Masahito Nishiura and
• Takeshi Serizawa

Beilstein J. Nanotechnol. 2019, 10, 1778–1788, doi:10.3762/bjnano.10.173

• the reaction mixtures. To readily assess gelation, the vials containing the mixtures after the reaction were inverted. For SEM observations, the gelled products (1 mL) were purified by immersion in water at 4 °C for 1 week. The water was exchanged each day. For the other characterization techniques

Synthesis of P- and N-doped carbon catalysts for the oxygen reduction reaction via controlled phosphoric acid treatment of folic acid

• Rieko Kobayashi,
• Takafumi Ishii,
• Yasuo Imashiro and
• Jun-ichi Ozaki

Beilstein J. Nanotechnol. 2019, 10, 1497–1510, doi:10.3762/bjnano.10.148

• cm2 cell was used for fuel-cell testing. Polarization curves were obtained at a cell temperature of 80 °C, a back pressure of 200 kPa, and a reactant gas relative humidity of 100% using H2 (1 L·min−1) and O2 (1 L·min−1) as anode and cathode gases, respectively. Characterization techniques The Brunauer

Warped graphitic layers generated by oxidation of fullerene extraction residue and its oxygen reduction catalytic activity

• Machiko Takigami,
• Rieko Kobayashi,
• Takafumi Ishii,
• Yasuo Imashiro and
• Jun-ichi Ozaki

Beilstein J. Nanotechnol. 2019, 10, 1391–1400, doi:10.3762/bjnano.10.137

• stream (O2 [Vol.]/N2 [Vol.] = 6:94) for a duration ranging from 0.5 to 5 h. The oxidized NBs are referred to as ONB-t (t = 0.5, 1, 2, 3, 5) according to their oxidation time. A control was also prepared from NB-ORG by heating it at 600 °C in a nitrogen stream for 2 h (NNB). Characterization techniques

The effect of magneto-crystalline anisotropy on the properties of hard and soft magnetic ferrite nanoparticles

• Hajar Jalili,
• Bagher Aslibeiki,
• Ali Ghotbi Varzaneh and
• Volodymyr A. Chernenko

Beilstein J. Nanotechnol. 2019, 10, 1348–1359, doi:10.3762/bjnano.10.133

• nanoparticles were washed with deionized water for several times and, finally, dried at room temperature for 24 h. Characterization techniques Phase purity and crystalline structure of the samples were characterized by using a Philips X′Pert Pro MPDX-ray diffractometer (XRD) with Cu Kα (λ = 0.154 nm) radiation

Multicomponent bionanocomposites based on clay nanoarchitectures for electrochemical devices

• Giulia Lo Dico,
• Bernd Wicklein,
• Lorenzo Lisuzzo,
• Giuseppe Lazzara,
• Pilar Aranda and
• Eduardo Ruiz-Hitzky

Beilstein J. Nanotechnol. 2019, 10, 1303–1315, doi:10.3762/bjnano.10.129

• freeze-casting to obtain the bioactive films (film-GOx) and the bioactive foams (foam-GOx), respectively, and were stored at 4 °C until usage. Characterization techniques The morphology of the prepared bionanocomposite films and foams was evaluated by scanning electron microscopy (SEM) using a SEM

The systemic effect of PEG-nGO-induced oxidative stress in vivo in a rodent model

• Qura Tul Ain,
• Samina Hyder Haq,
• Abeer Alshammari,
• Moudhi Abdullah Al-Mutlaq and
• Muhammad Naeem Anjum

Beilstein J. Nanotechnol. 2019, 10, 901–911, doi:10.3762/bjnano.10.91

• polyethylene glycol (PEG) was added to the solution which was stirred for 6 h. The PEG-nGO solution was centrifuged at 1000g for 10 min and was washed with distilled water several times and dried at 55 °C for 24 h. Characterization techniques X-ray diffractometer (Bruker D8 ADVANCE) was used to confirm the GO

Synthesis of MnO₂–CuO–Fe₂O₃/CNTs catalysts: low-temperature SCR activity and formation mechanism

• Yanbing Zhang,
• Lihua Liu,
• Yingzan Chen,
• Xianglong Cheng,
• Chengjian Song,
• Mingjie Ding and
• Haipeng Zhao

Beilstein J. Nanotechnol. 2019, 10, 848–855, doi:10.3762/bjnano.10.85

• optimal load of 4%. Characterization techniques X-ray diffraction (XRD) was measured with an X'Pert Pro MPD X-ray diffractometer using Cu Kα radiation (λ = 0.15406 nm) with a 2θ range from 5° to 80°. Transmission electron microscopy (TEM) was performed on a JEOL model JEM 2010 EX instrument. Temperature

Self-assembly and wetting properties of gold nanorod–CTAB molecules on HOPG

• Imtiaz Ahmad,
• Floor Derkink,
• Tim Boulogne,
• Pantelis Bampoulis,
• Harold J. W. Zandvliet,
• Hidayat Ullah Khan,
• Rahim Jan and
• E. Stefan Kooij

Beilstein J. Nanotechnol. 2019, 10, 696–705, doi:10.3762/bjnano.10.69

• centrifuge tube. Characterization techniques Scanning electron microscopy (SEM) imaging of the samples was undertaken with a Zeiss 1550 system (optimum resolution ≈1 nm at 2 kV accelerating voltage). Tapping-mode AFM imaging was carried out with an Agilent 5100 atomic force microscope using HQ:NSC35/Al

Direct observation of the CVD growth of monolayer MoS₂ using in situ optical spectroscopy

• Claudia Beatriz López-Posadas,
• Yaxu Wei,
• Wanfu Shen,
• Daniel Kahr,
• Michael Hohage and
• Lidong Sun

Beilstein J. Nanotechnol. 2019, 10, 557–564, doi:10.3762/bjnano.10.57

• the morphology and crystalline structure of the films. By systematic study using in situ optical spectroscopy assisted with other ex situ characterization techniques, the details of the kinetics including adsorption, dissociation, reaction, nucleation, and growth can be revealed. Differential

Mechanical and thermodynamic properties of Aβ₄₂, Aβ₄₀, and α-synuclein fibrils: a coarse-grained method to complement experimental studies

• Adolfo B. Poma,
• Horacio V. Guzman,
• Mai Suan Li and
• Panagiotis E. Theodorakis

Beilstein J. Nanotechnol. 2019, 10, 500–513, doi:10.3762/bjnano.10.51

• heterogeneous soft materials. We investigate both the elastic and thermodynamic properties of the biological fibrils in order to substantiate experimental nanomechanical characterization techniques that are quickly developing and reaching dynamic imaging with video rate capabilities. The computational method

Reduced graphene oxide supported C₃N₄ nanoflakes and quantum dots as metal-free catalysts for visible light assisted CO₂ reduction

• Md Rakibuddin and
• Haekyoung Kim

Beilstein J. Nanotechnol. 2019, 10, 448–458, doi:10.3762/bjnano.10.44

• (4 e−) to obtain each HCHO is also considered, and the intensity of the light is measured by following standard potassium ferrioxalate method [53]. Characterization techniques PXRD was carried out using an X’pert Pro PANalytical instrument (Cu Kα radiation, λ = 0.154 nm) within a 2θ range of 10–60

Thermal control of the defunctionalization of supported Au₂₅(glutathione)₁₈ catalysts for benzyl alcohol oxidation

• Zahraa Shahin,
• Hyewon Ji,
• Rodica Chiriac,
• Nadine Essayem,
• Franck Rataboul and
• Aude Demessence

Beilstein J. Nanotechnol. 2019, 10, 228–237, doi:10.3762/bjnano.10.21

• air flow at a rate of 2 °C/min. All chemicals were used without further purification. All glassware were washed with aqua regia and rinsed with ethanol. Ultrapure water (18 MΩ) was used in all experiments. Characterization techniques Powder X-ray diffraction (PXRD) was carried out on a Bruker D8

pH-mediated control over the mesostructure of ordered mesoporous materials templated by polyion complex micelles

• Emilie Molina,
• Mélody Mathonnat,
• Jason Richard,
• Patrick Lacroix-Desmazes,
• Martin In,
• Philippe Dieudonné,
• Thomas Cacciaguerra,
• Corine Gérardin and
• Nathalie Marcotte

Beilstein J. Nanotechnol. 2019, 10, 144–156, doi:10.3762/bjnano.10.14

• for 8 hours. Characterization techniques The formation of polyion complex (PIC) micelles as a function of pH (3 < pH < 10) was studied by dynamic light scattering (DLS) experiments at 25 ± 1°C using a Malvern 4800 spectrogoniometer (Malvern Instruments, UK) equipped with a 50 mW laser operating at 532

Colloidal chemistry with patchy silica nanoparticles

• Pierre-Etienne Rouet,
• Cyril Chomette,
• Laurent Adumeau,
• Etienne Duguet and
• Serge Ravaine

Beilstein J. Nanotechnol. 2018, 9, 2989–2998, doi:10.3762/bjnano.9.278

• collected by three cycles of centrifugation (500g; 20 min) and redispersion in ethanol. Characterization techniques Transmission electron microscopy (TEM) TEM experiments were performed using a Hitachi H600 microscope operating at an acceleration voltage of 75 kV and a JEOL JEM 1400 Plus microscope

Size-selected Fe₃O₄–Au hybrid nanoparticles for improved magnetism-based theranostics

• Maria V. Efremova,
• Yulia A. Nalench,
• Eirini Myrovali,
• Anastasiia S. Garanina,
• Ivan S. Grebennikov,
• Polina K. Gifer,
• Maxim A. Abakumov,
• Marina Spasova,
• Makis Angelakeris,
• Alexander G. Savchenko,
• Michael Farle,
• Natalia L. Klyachko,
• Alexander G. Majouga and
• Ulf Wiedwald

Beilstein J. Nanotechnol. 2018, 9, 2684–2699, doi:10.3762/bjnano.9.251

• , unbound polymer was removed by centrifugation (14500 rpm for 30 min) twice. Finally, the NPs were redispersed in 2 mL DI H2O. Characterization techniques All particle batches were examined by a JEOL JEM-1400 transmission electron microscope operated at 120 kV acceleration voltage. Overview images were

Hierarchical heterostructures of Bi₂MoO₆ microflowers decorated with Ag₂CO₃ nanoparticles for efficient visible-light-driven photocatalytic removal of toxic pollutants

• Shijie Li,
• Wei Jiang,
• Shiwei Hu,
• Yu Liu,
• Yanping Liu,
• Kaibing Xu and
• Jianshe Liu

Beilstein J. Nanotechnol. 2018, 9, 2297–2305, doi:10.3762/bjnano.9.214

• . Herein, Ag2CO3 nanoparticles were in situ formed on Bi2MoO6 microflowers to produce Ag2CO3/Bi2MoO6 heterostructures via a facile procedure. The morphologies, phases, chemical compositions, and optical properties of Ag2CO3/Bi2MoO6 were examined by multiple characterization techniques. The Ag2CO3/Bi2MoO6

SO₂ gas adsorption on carbon nanomaterials: a comparative study

• Deepu J. Babu,
• Divya Puthusseri,
• Frank G. Kühl,
• Sherif Okeil,
• Michael Bruns,
• Manfred Hampe and
• Jörg J. Schneider

Beilstein J. Nanotechnol. 2018, 9, 1782–1792, doi:10.3762/bjnano.9.169

• evaluation by N2 adsorption isotherm measurement and a detailed XPS analysis of their surface functionalities. Finally, the gas adsorption studies of all materials are presented and compared comprehensively. Raman spectroscopy is one of the few meaningful characterization techniques that are able to

• carried out at 900 °C by passing ethene (200 sccm), hydrogen (800 sccm), argon (1200 sccm) and ppm-scale quantities of water vapor together for 15 min. Characterization techniques Raman measurements were performed using a Horiba Jobin Yvon, model HR 800 LabRAM high-resolution microscope using a He–Ne

Multimodal noncontact atomic force microscopy and Kelvin probe force microscopy investigations of organolead tribromide perovskite single crystals

• Yann Almadori,
• David Moerman,
• Jaume Llacer Martinez,
• Philippe Leclère and
• Benjamin Grévin

Beilstein J. Nanotechnol. 2018, 9, 1695–1704, doi:10.3762/bjnano.9.161

• Solar Cells by Complementary Characterization Techniques (StableNextSol)”. D.M. is grateful to FRS-FNRS for a post-doctoral fellowship. Ph.L. is a Senior Research Associate of FRS-FNRS (Belgium).

Ag₂WO₄ nanorods decorated with AgI nanoparticles: Novel and efficient visible-light-driven photocatalysts for the degradation of water pollutants

• Shijie Li,
• Shiwei Hu,
• Wei Jiang,
• Yanping Liu,
• Yu Liu,
• Yingtang Zhou,
• Liuye Mo and
• Jianshe Liu

Beilstein J. Nanotechnol. 2018, 9, 1308–1316, doi:10.3762/bjnano.9.123

• Abstract To develop efficient and stable visible-light-driven (VLD) photocatalysts for pollutant degradation, we synthesized novel heterojunction photocatalysts comprised of AgI nanoparticle-decorated Ag2WO4 nanorods via a facile method. Various characterization techniques, including XRD, SEM, TEM, EDX

Comparative study of antibacterial properties of polystyrene films with TiO_x and Cu nanoparticles fabricated using cluster beam technique

• Vladimir N. Popok,
• Cesarino M. Jeppesen,
• Peter Fojan,
• Anna Kuzminova,
• Jan Hanuš and
• Ondřej Kylián

Beilstein J. Nanotechnol. 2018, 9, 861–869, doi:10.3762/bjnano.9.80

• properties of composite films with Ti/TiOx NPs a simple setup has been constructed allowing for the illumination of the samples by UV light (λ = 320–380 nm) as shown in Figure 8. E.coli bacteria are used for the tests. Characterization techniques The surface morphology of the samples with supported NPs is

Synthesis and characterization of two new TiO₂-containing benzothiazole-based imine composites for organic device applications

• Anna Różycka,
• Agnieszka Iwan,
• Krzysztof Artur Bogdanowicz,
• Michal Filapek,
• Natalia Górska,
• Damian Pociecha,
• Marek Malinowski,
• Patryk Fryń,
• Agnieszka Hreniak,
• Jakub Rysz,
• Paweł Dąbczyński and
• Monika Marzec

Beilstein J. Nanotechnol. 2018, 9, 721–739, doi:10.3762/bjnano.9.67

• . Characterization techniques The surface area and porosity analyzer by Micromeritics (ASAP2020) was used to obtain the physical parameters of titanium dioxide. The experiment was carried out at liquid nitrogen temperature, using nitrogen as an adsorbate. Prior to the measurements, the sample was precisely weighed

Electrical properties of a liquid crystal dispersed in an electrospun cellulose acetate network

• Doina Manaila Maximean,
• Octavian Danila,
• Pedro L. Almeida and
• Constantin Paul Ganea

Beilstein J. Nanotechnol. 2018, 9, 155–163, doi:10.3762/bjnano.9.18

• at 333.5 K. The refractive index of the CA is 1.45 and the ordinary refractive index of E7 liquid crystal is 1.51. This sample type was named CA/E7. Characterization techniques Scanning electron microscopy The fiber dimensions and distribution were characterized by SEM, using a SEM DSM 962 model from

Combined scanning probe electronic and thermal characterization of an indium arsenide nanowire

• Tino Wagner,
• Fabian Menges,
• Heike Riel,
• Bernd Gotsmann and
• Andreas Stemmer

Beilstein J. Nanotechnol. 2018, 9, 129–136, doi:10.3762/bjnano.9.15

• need for characterization techniques able to map both electronic and thermal properties down to the relevant length scales in operating devices. Unlike optical techniques that are limited by diffraction to a resolution of several hundred nanometres, scanning probe methods rely on the interaction of a

Ta₂N₃ nanocrystals grown in Al₂O₃ thin layers

• Krešimir Salamon,
• Maja Buljan,
• Iva Šarić,
• Mladen Petravić and
• Sigrid Bernstorff

Beilstein J. Nanotechnol. 2017, 8, 2162–2170, doi:10.3762/bjnano.8.215

• nitride NPs with the processing parameters of the films. For this purpose we used complimentary and well-established characterization techniques such as X-ray reflectivity (XRR), grazing incidence small-angle X-ray scattering (GISAXS), grazing incidence X-ray diffraction (GIXRD), secondary ion mass