Orally administered docetaxel-loaded chitosan-decorated cationic PLGA nanoparticles for intestinal tumors: formulation, comprehensive in vitro characterization, and release kinetics

• Sedat Ünal,
• Osman Doğan and
• Yeşim Aktaş

Beilstein J. Nanotechnol. 2022, 13, 1393–1407, doi:10.3762/bjnano.13.115

• of 0.2% [77]. The organic phase was added to the aqueous phase on a magnetic stirrer at 550 rpm. The resulting o/w emulsion was sonicated on an ice bath with an ultrasonic probe at 25% power for 1 min (four times at 10 s intervals), and PLGA nanoparticles were obtained. The nanoparticles were stirred

• continuously for 24 h with a magnetic stirrer and the organic phase was evaporated. Then the PLGA nanoparticles were precipitated by centrifugation at 10000 rpm for 45 min and washed four times with distilled water. DCX-PLGA NPs pellets were suspended in 2 mL of solution containing 5% (w/w) mannitol, frozen at

• then applied over the gelatin layer. Initially, a 10 percent (w/v) gelatin dispersion was made by heating 50 mL of ultrapure water on a magnetic stirrer to 60 °C, and then 1 mL of the dispersion was added to each well of the 24-well cell plates. The gelatin layer in the experimental model was cooled to

Supramolecular assembly of pentamidine and polymeric cyclodextrin bimetallic core–shell nanoarchitectures

• Alexandru-Milentie Hada,
• Nina Burduja,
• Marco Abbate,
• Claudio Stagno,
• Guy Caljon,
• Louis Maes,
• Nicola Micale,
• Massimiliano Cordaro,
• Angela Scala,
• Antonino Mazzaglia and
• Anna Piperno

Beilstein J. Nanotechnol. 2022, 13, 1361–1369, doi:10.3762/bjnano.13.112

• were added three times at room temperature, every hour, to a solution of nanoG (6.75 mL) to obtain nanoGS determined by a light orange staining of the solution. After each addition of silver ions, the mixture was kept under magnetic stirring at room temperature (20–25 °C) for 1 h. The reduction of

Recent trends in Bi-based nanomaterials: challenges, fabrication, enhancement techniques, and environmental applications

• Vishal Dutta,
• Ankush Chauhan,
• Ritesh Verma,
• C. Gopalkrishnan and
• Van-Huy Nguyen

Beilstein J. Nanotechnol. 2022, 13, 1316–1336, doi:10.3762/bjnano.13.109

• thanks to the significant charge carrier dispersion provided by hybrid orbitals involving the Bi 6s orbital, as seen in Figure 2. Photoinduced electron–hole separation and charge carrier transfer in Bi-based materials are facilitated by a unique layered structure that creates an IEF. A magnetic field is

Studies of probe tip materials by atomic force microscopy: a review

• Ke Xu and
• Yuzhe Liu

Beilstein J. Nanotechnol. 2022, 13, 1256–1267, doi:10.3762/bjnano.13.104

• mechanical properties of the cantilever beam directly affect the performance, measurement resolution, and image quality of the AFM instrument. AFM probe tips [9][10] are generally fabricated with coatings, carbon nanotubes, magnetic nanoparticles, or even protein functionalization. A combination of probe

• robustness and durability of nanowire scanning probes are also crucial. Due to their unique properties in electrical, magnetic, and optical research fields [31][32][33], metal nanowires have been prepared by various methods and applied in various fields by domestic and foreign scholars in recent years. Tay

• coupling another specific H1N1 oligonucleotide fragment using magnetic microspheres as solid-phase support; both were bound to the target DNA (exact match DNA) to form a colorless nucleic acid probe. The two are combined with the target DNA (exact match DNA) to form a colorless capture probe-target DNA

A super-oscillatory step-zoom metalens for visible light

• Yi Zhou,
• Chao Yan,
• Peng Tian,
• Zhu Li,
• Yu He,
• Bin Fan,
• Zhiyong Wang,
• Yao Deng and
• Dongliang Tang

Beilstein J. Nanotechnol. 2022, 13, 1220–1227, doi:10.3762/bjnano.13.101

• -oscillatory lenses, through fine modulation of the amplitude and phase of the optical field, have been used in super-resolution imaging [9][10][11], heat-assisted magnetic recording [12], and optical metrology [13]. In order to form the specific super-oscillatory optical field, common super-oscillatory lenses

Design of surface nanostructures for chirality sensing based on quartz crystal microbalance

• Yinglin Ma,
• Xiangyun Xiao and
• Qingmin Ji

Beilstein J. Nanotechnol. 2022, 13, 1201–1219, doi:10.3762/bjnano.13.100

• industry, detection and separation of enantiomers are essential for their safe usage. With appropriate detectors and transduction signals, various analysis instruments and techniques have been used for chirality detection or chiral separation. They include circular dichroism (CD) [9], nuclear magnetic

• outstanding sensing properties, with real-time, sensitive and selective chiral detection, high durability, and easy recovery. To understand the chiral recognition between calixarenes and analytes, Zoya I. Kazantseva et al. combined QCM and proton magnetic resonance spectroscopy (1H NMR) techniques to study

• strengthened. This work presented the great potential of bare metal surfaces as an effective platform for chirality detection. Metals are not only more stable than organic materials in various usage conditions, but also have excellent optical, electrical, and magnetic properties. They may facilitate the design

Nonlinear features of the superconductor–ferromagnet–superconductor φ₀ Josephson junction in the ferromagnetic resonance region

• Aliasghar Janalizadeh,
• Ilhom R. Rahmonov,
• Sara A. Abdelmoneim,
• Yury M. Shukrinov and
• Mohammad R. Kolahchi

Beilstein J. Nanotechnol. 2022, 13, 1155–1166, doi:10.3762/bjnano.13.97

• , 141980, Russia Moscow Institute of Physics and Technology, Dolgoprudny, 141700, Moscow Region, Russia Physics Department, Menofiya University, Faculty of Science, 32511, Shebin Elkom, Egypt 10.3762/bjnano.13.97 Abstract We demonstrate the manifestations of nonlinear features in magnetic dynamics and I–V

• characteristics of a φ0 Josephson junction in the ferromagnetic resonance region. We show that at small values of the system parameters damping, spin–orbit interaction, and Josephson-to-magnetic energy ratio, the magnetic dynamics is reduced to the dynamics of a scalar Duffing oscillator driven by the Josephson

• difference with the magnetic moment of a ferromagnet in a φ0 junction leads to a number of unique features important for superconducting spintronics and modern information technology [1][2][3][4][5]. It allows one to control the magnetization precession by the superconducting current and affects the current

A cantilever-based, ultrahigh-vacuum, low-temperature scanning probe instrument for multidimensional scanning force microscopy

• Hao Liu,
• Zuned Ahmed,
• Sasa Vranjkovic,
• Manfred Parschau,
• Andrada-Oana Mandru and
• Hans J. Hug

Beilstein J. Nanotechnol. 2022, 13, 1120–1140, doi:10.3762/bjnano.13.95

• , the resonance frequency-to-stiffness ratio of thin cantilevers proved to be beneficial for the measurement of ultrasmall forces [28] or, in combination with high cantilever quality factors, the detection of small magnetic fields [29]. For the latter, new tip–sample distance control operation modes

• acquisition of overview images at larger tip–sample distances. Our instrument is thus well-suited to find specific locations in devices, map weak magnetic or electrostatic forces, and also permits the acquisition of smaller scan range atomic resolution images at specific locations. This manuscript is

• in the microscope, customized magnetic feedthrough manipulators with hex-key end-pieces are used. Cryostat and preparation chamber are both pumped with 300 L/s ion pumps, which also include titanium sublimation sources. The load-lock chamber is pumped with a 67 L/s turbo pump. The bath cryostat

Green synthesis of zinc oxide nanoparticles toward highly efficient photocatalysis and antibacterial application

• Vo Thi Thu Nhu,
• Nguyen Duy Dat,
• Le-Minh Tam and
• Nguyen Hoang Phuong

Beilstein J. Nanotechnol. 2022, 13, 1108–1119, doi:10.3762/bjnano.13.94

• performed using NaOH to create sodium resinate, and zinc resinate was subsequently synthesized from sodium resinate. Rosin (4 g) was dissolved in 24 mL of 0.5 N NaOH at 90 °C under magnetic stirring for 90 min. Then, 40 mL of ZnCl2 (10%) was added to the mixture which was stirred for 60 min to form zinc

• UV light using green-synthesized ZnO nanoparticles from rosin and zinc chloride salt was investigated using a batch photocatalytic reactor. Firstly, 0.1 g of ZnO NPs was added to 50 mL of MO or MB solution with an initial concentration of 10 mg/L. The solution was then submitted to magnetic stirring

Effects of focused electron beam irradiation parameters on direct nanostructure formation on Ag surfaces

• Jānis Sniķeris,
• Vjačeslavs Gerbreders,
• Andrejs Bulanovs and
• Ēriks Sļedevskis

Beilstein J. Nanotechnol. 2022, 13, 1004–1010, doi:10.3762/bjnano.13.87

• on the growth rate of the nanodots was observed. Metals with lower melting points (implying lower interatomic bond energy) produced higher nanodots at similar irradiation parameters. Conversely, metals with higher volume magnetic susceptibility produced much wider nanodots with a higher volume. A

• nanostructures could be controlled and modified in a beneficial way. This, however, would require further research on the various properties (electric, magnetic, optical, and mechanical) of nanostructures obtained through irradiation by a focused EB on metal surfaces. Conclusion In this work we explored how

Theoretical investigations of oxygen vacancy effects in nickel-doped zirconia from ab initio XANES spectroscopy at the oxygen K-edge

• Dick Hartmann Douma,
• Lodvert Tchibota Poaty,
• Alessio Lamperti,
• Stéphane Kenmoe,
• Abdulrafiu Tunde Raji,
• Alberto Debernardi and
• Bernard M’Passi-Mabiala

Beilstein J. Nanotechnol. 2022, 13, 975–985, doi:10.3762/bjnano.13.85

• and magnetic order in a typical diluted magnetic oxide. Such a finding may be crucial for spintronics-related applications. Keywords: defect; ligand field; nickel; oxidation state; oxides; spectroscopy; spintronics; vacancy; X-ray absorption; X-ray absorption near-edge structure (XANES); zirconia

• ; Introduction The search for room-temperature magnetic semiconductors has been the driving force behind the increasing interest of material scientists and solid-state physicists in magnetic oxides [1]. This is due to their potential applications as building block of spintronic devices. Magnetic oxides are

• semiconducting or insulating materials doped randomly or uniformly with magnetic impurities in the oxide matrix. A typical example are thin films of uniformly Fe-doped ZrO2 where dopant concentrations, x, from the diluted regime (i.e., x = 1–5 atom % [2]) to very high concentrations (up to x ≈ 25 atom %) have

Comparing the performance of single and multifrequency Kelvin probe force microscopy techniques in air and water

• Jason I. Kilpatrick,
• Emrullah Kargin and
• Brian J. Rodriguez

Beilstein J. Nanotechnol. 2022, 13, 922–943, doi:10.3762/bjnano.13.82

• techniques to yield multidimensional data sets and aid in isolation of the influence of electrostatic potential, for example, PeakForce infrared-KPFM (PFIR-KPFM) [66], nanomechanical mapping + KPFM [67][68], magnetic force microscopy (MFM) + KPFM [69], piezoresponse force microscopy (PFM) + KPFM [70], and G

Efficiency of electron cooling in cold-electron bolometers with traps

• Dmitrii A. Pimanov,
• Vladimir A. Frost,
• Anton V. Blagodatkin,
• Anna V. Gordeeva,
• Andrey L. Pankratov and
• Leonid S. Kuzmin

Beilstein J. Nanotechnol. 2022, 13, 896–901, doi:10.3762/bjnano.13.80

• , τm is the magnetic scattering parameter that is found from the fit. W = W0ξ0/d is the effective tunneling parameter for planar tunnel junctions used in our CEB, W0 = R(ξ0)/RN is the tunneling parameter, RN is the normal resistance of the junction, and R(ξ0) is the resistance of Al/Fe absorber with

Ultrafast signatures of magnetic inhomogeneity in Pd_1−xFe_x (x ≤ 0.08) epitaxial thin films

• Andrey V. Petrov,
• Sergey I. Nikitin,
• Lenar R. Tagirov,
• Amir I. Gumarov,
• Igor V. Yanilkin and
• Roman V. Yusupov

Beilstein J. Nanotechnol. 2022, 13, 836–844, doi:10.3762/bjnano.13.74

• ferromagnetic state causes a qualitative change of both the reflectivity and the magneto-optical Kerr effect transients. A nanoscale magnetic inhomogeneity of the ferromagnet/paramagnet type inherent in the palladium-rich Pd1−xFex alloys reveals itself through the occurrence of a relatively slow, 10–25 ps

• , photoinduced demagnetization component following a subpicosecond one; the former vanishes at low temperatures only in the x = 0.080 sample. We argue that the 10 ps timescale demagnetization originates most probably from the diffusive transport of d electrons under the condition of nanoscale magnetic

• inhomogeneities. The low-temperature fraction of the residual paramagnetic phase can be deduced from the magnitude of the slow reflectivity relaxation component. It is estimated as ≈30% for x = 0.038 and ≈15% for x = 0.062 films. The minimal iron content ensuring the magnetic homogeneity of the ferromagnetic

Ideal Kerker scattering by homogeneous spheres: the role of gain or loss

• Qingdong Yang,
• Weijin Chen,
• Yuntian Chen and
• Wei Liu

Beilstein J. Nanotechnol. 2022, 13, 828–835, doi:10.3762/bjnano.13.73

• exactly zero backward scattering. It was previously shown that, for non-magnetic homogeneous spheres with incident plane waves, either gain or loss prohibit ideal Kerker scattering, provided that only electric and magnetic multipoles of a specific order are present and contributions from other multipoles

• scattering; Mie particle; Introduction The original Kerker scattering of zero backward scattering was first proposed for homogeneous magnetic spheres with equal electric permittivity and magnetic permeability ε = μ [1]. This proposal had not attracted much attention for a long time, mainly due to the

• scarcity of magnetic materials, especially at the high-frequency spectral regimes. In the past decade, thanks to the explosive developments of metamaterials and metasurfaces, the underlying core concept of optically induced magnetism in non-magnetic structures has invigorated and completely transformed

Optimizing PMMA solutions to suppress contamination in the transfer of CVD graphene for batch production

• Chun-Da Liao,
• Andrea Capasso,
• Tiago Queirós,
• Telma Domingues,
• Fatima Cerqueira,
• Nicoleta Nicoara,
• Jérôme Borme,
• Paulo Freitas and
• Pedro Alpuim

Beilstein J. Nanotechnol. 2022, 13, 796–806, doi:10.3762/bjnano.13.70

• -Magnetic Interference Shielding", with the reference POCI-01-0247-FEDER-045939, co-funded by COMPETE 2020 – Operational Programme for Competitiveness and Internationalization and the Portuguese Foundation for Science and Technology (FCT), under the Portugal 2020 Partnership Agreement, through the European

Recent advances in nanoarchitectures of monocrystalline coordination polymers through confined assembly

• Lingling Xia,
• Qinyue Wang and
• Ming Hu

Beilstein J. Nanotechnol. 2022, 13, 763–777, doi:10.3762/bjnano.13.67

• ][38]. The networks can also help to take other components into the single crystals. Nanoparticles, such as quantum dots or iron oxide, which attach to the networks, can be encapsulated within the networks inside the single crystals, rendering the single crystals fluorescent or magnetic [39][40][41

• -irradiation, mechanical deformation, or electrical and magnetic forces could influence the interactions and the formation kinetics of the interest structures. From the point view of materials, it would be interesting to use confined growth and assembly to assemble the coordination polymers that could satisfy

Direct measurement of surface photovoltage by AC bias Kelvin probe force microscopy

• Masato Miyazaki,
• Yasuhiro Sugawara and
• Yan Jun Li

Beilstein J. Nanotechnol. 2022, 13, 712–720, doi:10.3762/bjnano.13.63

• changes in surface potential induced by modulated external disturbances such as electric fields, magnetic fields [70][71], and stress fields [72][73]. Appendix Sensitivity of AC-KPFM in the FM mode The sensitivity of AC-KPFM in the FM mode is comparable to the sensitivity of FM-KPFM. The frequency noise

Experimental and theoretical study of field-dependent spin splitting at ferromagnetic insulator–superconductor interfaces

• Peter Machon,
• Michael J. Wolf,
• Detlef Beckmann and
• Wolfgang Belzig

Beilstein J. Nanotechnol. 2022, 13, 682–688, doi:10.3762/bjnano.13.60

• Institute of Technology (KIT), D-76021 Karlsruhe, Germany Institute for Quantum Materials and Technologies, Karlsruhe Institute of Technology (KIT), D-76021 Karlsruhe, Germany 10.3762/bjnano.13.60 Abstract We present a combined experimental and theoretical work that investigates the magnetic proximity

• superconductivity [7][8], the triplet proximity effect [9][10][11], and implementations of superconducting switches and spin valves based on either the singlet or triplet proximity effect [12][13][14][15][16][17][18]. Furthermore, the spin-dependent density of states due to the proximity of a magnetic insulator is

• time [24][25][26]. Magnetic insulators have been used successfully, for example, in magnetic Josephson junctions [27], superconducting spin switches [13], and for studying the triplet proximity effect [28]. Ferromagnetic insulators are a good probe of the spin-dependent proximity effect in bilayer

Tunable high-quality-factor absorption in a graphene monolayer based on quasi-bound states in the continuum

• Jun Wu,
• Yasong Sun,
• Feng Wu,
• Biyuan Wu and
• Xiaohu Wu

Beilstein J. Nanotechnol. 2022, 13, 675–681, doi:10.3762/bjnano.13.59

• . TM polarized (the magnetic field is along the direction of the y-axis) monochromatic plane waves are incident from the substrate at an angle θ. In our simulation, we set d = 3.3 μm, w = 2.31 μm, h = 3.5 μm, nh = 3.48, ns = 1.45, and θ = 0.1°. The surface conductivity of graphene has intraband and

A superconducting adiabatic neuron in a quantum regime

• Marina V. Bastrakova,
• Dmitrii S. Pashin,
• Dmitriy A. Rybin,
• Andrey E. Schegolev,
• Nikolay V. Klenov,
• Igor I. Soloviev,
• Anastasiya A. Gorchavkina and
• Arkady M. Satanin

Beilstein J. Nanotechnol. 2022, 13, 653–665, doi:10.3762/bjnano.13.57

• work, we account for this by considering the neuron cell operation in a quantum regime. We investigate the dynamics of this cell in search of conditions that provide the required sigmoid activation function (conversion of the input magnetic flux into the average output current), suitable for the

• the dynamics of the neuron. The range of the operating parameters for the proposed neuron circuit under the action of unipolar magnetic flux pulses is found. Finally, the influence of the dissipation on the features of the dynamic processes and characteristics of the cell is revealed. Methods Neuron

• in [46] when considering the classical mode of this system. Inductances are normalized to (2πIc/Φ0), where Ic is the critical current of the Josephson junction and Φ0 is the magnetic flux quantum. The inertial properties of the system are due to the junction capacitance, which, along with the

Comparative molecular dynamics simulations of thermal conductivities of aqueous and hydrocarbon nanofluids

• Adil Loya,
• Antash Najib,
• Fahad Aziz,
• Asif Khan,
• Guogang Ren and
• Kun Luo

Beilstein J. Nanotechnol. 2022, 13, 620–628, doi:10.3762/bjnano.13.54

• -dimensional free convective hybrid nanofluid (Fe3O4 + MWCNT/H2O) stream over a resilient cylinder under the influence of a light magnetic field. The heat transportation problem was resolved by combining two methods (FEM and FVM) and an understanding that the temperature near the wall escalated due to an

A new method for obtaining the magnetic shape anisotropy directly from electron tomography images

• Cristian Radu,
• Ioana D. Vlaicu and
• Andrei C. Kuncser

Beilstein J. Nanotechnol. 2022, 13, 590–598, doi:10.3762/bjnano.13.51

• Cristian Radu Ioana D. Vlaicu Andrei C. Kuncser National Institute of Materials Physics, Magurele, Romania Faculty of Physics, University of Bucharest, Bucharest, Romania 10.3762/bjnano.13.51 Abstract A new methodology to obtain magnetic information on magnetic nanoparticle (MNP) systems via

• developed in order to increase the reliability of the correlations between morphology and magnetism. Using the Magn3t software, the magnetic shape anisotropy magnitude and direction of magnetite nanoparticles has been extracted for the first time directly from transmission electron tomography. Keywords

• information becomes more important due to the potential presence of low-dimensionality effects. In the case of magnetic nanoscale systems, a complete knowledge of morphology is even more important because the configuration of magnetic moments in the system strongly depends on shape and size, through the shape

Stimuli-responsive polypeptide nanogels for trypsin inhibition

• Petr Šálek,
• Jana Dvořáková,
• Sviatoslav Hladysh,
• Diana Oleshchuk,
• Ewa Pavlova,
• Jan Kučka and
• Vladimír Proks

Beilstein J. Nanotechnol. 2022, 13, 538–548, doi:10.3762/bjnano.13.45

• crosslinking in inverse miniemulsion by modification of an earlier procedure [24]. Briefly, PHEG-Tyr (0.18 g) was dissolved in Q-H2O (4 g) in a round-bottom glass flask for 24 h at room temperature under magnetic stirring. Then, HRP (0.450 mg) was dissolved in Q-H2O (0.32 g) and added to the PHEG-Tyr aqueous

Ciprofloxacin-loaded dissolving polymeric microneedles as a potential therapeutic for the treatment of S. aureus skin infections

• Sharif Abdelghany,
• Walhan Alshaer,
• Yazan Al Thaher,
• Maram Al Fawares,
• Amal G. Al-Bakri,
• Saja Zuriekat and
• Randa SH. Mansour

Beilstein J. Nanotechnol. 2022, 13, 517–527, doi:10.3762/bjnano.13.43

• prepared by heating at 70 °C while stirring the solution with a magnetic stirrer (IKA-Werke GmbH & Co. KG, Staufen, Germany). Microneedles were prepared via a two-layer centrifugation method, as shown in Figure 1. Briefly, 10 mg CIP and 9 g of aqueous 20% w/w PVA/60% w/w PVP (9:1 weight ratio) or 9 g of 20

• % w/w PVA alone were stirred using a magnetic stirrer at 70 °C. Next, the mixture of CIP and PVA or PVA/PVP was centrifuged at 145g for 5 min (Eppendorf Centrifuge 5804, Merck KGaA, Darmstadt, Germany) to remove the air bubbles. The resulting mixture was then poured into 14 × 14, poly(dimethylsiloxane