Green fabrication of lanthanide-doped hydroxide-based phosphors: Y(OH)₃:Eu³⁺ nanoparticles for white light generation

• Tugrul Guner,
• Anilcan Kus,
• Mehmet Ozcan,
• Aziz Genc,
• Hasan Sahin and
• Mustafa M. Demir

Beilstein J. Nanotechnol. 2019, 10, 1200–1210, doi:10.3762/bjnano.10.119

• methods have been widely used such as sol–gel, hydrothermal, combustion, emulsion, and precipitation methods [31][32][33][34]. Among those, the sol–gel and co-precipitation methods are, in general, slow and usually involve additional steps. On the other hand, there is a huge waste of organic solvents

A highly efficient porous rod-like Ce-doped ZnO photocatalyst for the degradation of dye contaminants in water

• Binjing Hu,
• Qiang Sun,
• Chengyi Zuo,
• Yunxin Pei,
• Siwei Yang,
• Hui Zheng and
• Fangming Liu

Beilstein J. Nanotechnol. 2019, 10, 1157–1165, doi:10.3762/bjnano.10.115

• decarboxylation. Generally, zinc oxide materials can be synthesized via a hydrothermal process [18], sol–gel method [19], microemulsion method [20], among others. Due to its narrow band, the application of zinc oxide is limited, thus it is common to modify ZnO using rare-earth ions [9]. Koao et al. [21

Photoactive nanoarchitectures based on clays incorporating TiO₂ and ZnO nanoparticles

• Eduardo Ruiz-Hitzky,
• Pilar Aranda,
• Marwa Akkari,
• Nithima Khaorapapong and
• Makoto Ogawa

Beilstein J. Nanotechnol. 2019, 10, 1140–1156, doi:10.3762/bjnano.10.114

• nanostructured materials prepared by in situ formation of NPs can be achieved by applying various procedures such as impregnation by precipitation, sol–gel, solvothermal and microwave-assisted reactions. As already indicated, clay-based nanoarchitectures containing TiO2 NPs (anatase phase) are currently the most

• kaolinite surface through sol–gel methods as, for instance, one based on the controlled hydrolysis titanium(IV)-n-butoxide in ethanol, resulting in heterocoagulation with kaolinite in aqueous suspensions [96]. However, kaolinite can be expanded by the intercalation of polar molecules such as urea, dimethyl

• distributed on the surface of sepiolite or palygorskite [109][111][118]. Figure 3 also shows TEM images of TiO2 produced in a controlled sol–gel process on the external surface of sepiolite modified with cetyltrimethylammonium ions. A coverage of the silicate surface by small NPs (4–8 nm diameter) suitable

Fe₃O₄ nanoparticles as a saturable absorber for giant chirped pulse generation

• Ji-Shu Liu,
• Xiao-Hui Li,
• Abdul Qyyum,
• Yi-Xuan Guo,
• Tong Chai,
• Hua Xu and
• Jie Jiang

Beilstein J. Nanotechnol. 2019, 10, 1065–1072, doi:10.3762/bjnano.10.107

• analyzer (Rohde & Schwarz FSC6) is used to measure the signal-to-noise ratio of the pulse. There are many methods that can be employed for the synthesis of NPs, such as sol–gel, sol–hydrothermal, co-precipitate, or dry methods. Due to the homogeneity and the versatility of the product, a sol–hydrothermal

Rapid, ultraviolet-induced, reversibly switchable wettability of superhydrophobic/superhydrophilic surfaces

• Yunlu Pan,
• Wenting Kong,
• Bharat Bhushan and
• Xuezeng Zhao

Beilstein J. Nanotechnol. 2019, 10, 866–873, doi:10.3762/bjnano.10.87

• vinyltrimethoxysilane sol–gel where the WCA changed from about 180° to 108° in under 50 min upon UV illumination and then further reduced to 20° after another 30 min. Thus the total transition time from superhydrophobic to superhydrophilic was about 80 min. Petroffe et al. [29] modified TiO2 with 11-(4-(phenylazo

Reduced graphene oxide supported C₃N₄ nanoflakes and quantum dots as metal-free catalysts for visible light assisted CO₂ reduction

• Md Rakibuddin and
• Haekyoung Kim

Beilstein J. Nanotechnol. 2019, 10, 448–458, doi:10.3762/bjnano.10.44

• the help of protons. Conclusion Reduced graphene oxide supported C3N4 NF and QD hybrid (GCN) materials have been successfully synthesized via a sol–gel and hydrothermal method and are characterized in this work. The formation of g-C3N4 NFs (20–45 nm) and QDs (2–3 nm) can be controlled by varying the

Nanocomposite–parylene C thin films with high dielectric constant and low losses for future organic electronic devices

• Marwa Mokni,
• Gianluigi Maggioni,
• Abdelkader Kahouli,
• Sara M. Carturan,
• Walter Raniero and
• Alain Sylvestre

Beilstein J. Nanotechnol. 2019, 10, 428–441, doi:10.3762/bjnano.10.42

• recently proposed for low operating voltages of TFTs [1][2]. By using water-inducement, scandium oxide was succesfully integrated as gate dielectric in both InZnO and CuO TFTs [1]. Using a sol–gel approach, high-k ink hybrid AlOOH nanocomposites demonstrated low leakage currents suitable for low operating

One-step nonhydrolytic sol–gel synthesis of mesoporous TiO₂ phosphonate hybrid materials

• Yanhui Wang,
• P. Hubert Mutin and
• Johan G. Alauzun

Beilstein J. Nanotechnol. 2019, 10, 356–362, doi:10.3762/bjnano.10.35

• a nonhydrolytic sol–gel method involving the reaction of Ti(OiPr)4, acetophenone (2 equiv) and diethyl octylphosphonate (from 0 to 0.2 equiv) at 200 °C for 12 hours, in toluene. The different samples were characterized by 31P magic angle spinning nuclear magnetic resonance, Fourier transform

• modified by octylphosphonate units, where the octyl chains form an organic continuous matrix. Keywords: anatase; mesoporous; nonaqueous sol–gel; phosphonate; Introduction The development of porous hybrid organic–inorganic materials has been a major goal for materials scientists for more than 25 years [1

• organosilsesquioxane (O1.5Si–R–O1.5). These hybrids are usually prepared by conventional sol–gel processing, i.e., by hydrolysis and condensation of alkoxysilane precursors, which offers an excellent control over composition and homogeneity, while texture can be tuned using various templating approaches [9]. In the

Zn/F-doped tin oxide nanoparticles synthesized by laser pyrolysis: structural and optical properties

• Florian Dumitrache,
• Iuliana P. Morjan,
• Elena Dutu,
• Ion Morjan,
• Claudiu Teodor Fleaca,
• Monica Scarisoreanu,
• Alina Ilie,
• Marius Dumitru,
• Cristian Mihailescu,
• Adriana Smarandache and
• Gabriel Prodan

Beilstein J. Nanotechnol. 2019, 10, 9–21, doi:10.3762/bjnano.10.2

• .) antimony by spray pyrolysis [9] or by sol–gel methods followed by spin-coating and annealing in different environments [10], ii.) manganese by long-time annealing of Mn/SnO2 bilayers in air at 200 °C [11] or by co-precipitation [12], iii.) aluminum, copper or indium all by spray pyrolysis from ethanolic

• values (3.6–3.7 eV for 5–10 wt % Zn) than the undoped ones (3.97 eV). All of these were synthesized by sol–gel methods from SnCl2 and ZnCl2 hydropropanolic solutions and short-time annealed at 480 °C [19]. The same tendency was found in the sprayed (from SnCl2 and Zn(CH3COO)2 in acidic H2O–CH3OH

Characterization and influence of hydroxyapatite nanopowders on living cells

• Przemyslaw Oberbek,
• Tomasz Bolek,
• Adrian Chlanda,
• Seishiro Hirano,
• Sylwia Kusnieruk,
• Julia Rogowska-Tylman,
• Ganna Nechyporenko,
• Viktor Zinchenko,
• Wojciech Swieszkowski and
• Tomasz Puzyn

Beilstein J. Nanotechnol. 2018, 9, 3079–3094, doi:10.3762/bjnano.9.286

• manufactured using many different methods, such as hydrothermal synthesis, sol–gel synthesis, wet-chemical precipitation and microwave processing [16][17][18][19]. Many studies have shown that HAp can cause different biological responses depending on its physicochemical properties [20][21][22]. It is also

Graphene-enhanced metal oxide gas sensors at room temperature: a review

• Dongjin Sun,
• Yifan Luo,
• Marc Debliquy and
• Chao Zhang

Beilstein J. Nanotechnol. 2018, 9, 2832–2844, doi:10.3762/bjnano.9.264

• as a gas sensor because of its small bandgap (2.585 eV) and its physical and chemical stability [88][89]. In an early work, Jie et al. [90] reported that a NO2 sensor based on WO3 nanospheres wrapped in graphene sheets, prepared by a simple sol–gel technique, showed a linear response to low

Block copolymers for designing nanostructured porous coatings

• Roberto Nisticò

Beilstein J. Nanotechnol. 2018, 9, 2332–2344, doi:10.3762/bjnano.9.218

• peculiar characteristic can be coupled with sol–gel processes to produce well-ordered oxidic architectures [95][96]. The sol–gel process involves various chemical reactions such as hydrolysis, condensation, and consequently, polymerization involving the monomers (for inorganic systems, either metal

• alkoxides or metal chlorides) that evolves forming a colloidal solution (sol) and subsequently a stable network (gel) of polymerized particles. The byproducts of these polycondensation reactions are water and alcohol, depending on the precursor selected. Even if the principles behind the sol–gel reaction

• concerning the principles behind sol–gel chemistry, please refer to [4]. In order to enhance the structural control in oxidic systems (and in particular by modulating the porosity organization), one possibility is to exploit the templating action of amphiphilic BC supramolecular structures working as

Electrospun one-dimensional nanostructures: a new horizon for gas sensing materials

• Muhammad Imran,
• Nunzio Motta and
• Mahnaz Shafiei

Beilstein J. Nanotechnol. 2018, 9, 2128–2170, doi:10.3762/bjnano.9.202

Cryochemical synthesis of ultrasmall, highly crystalline, nanostructured metal oxides and salts

• Elena A. Trusova and
• Nikolai S. Trutnev

Beilstein J. Nanotechnol. 2018, 9, 1755–1763, doi:10.3762/bjnano.9.166

• that of the same composition prepared directly from an as-prepared microemulsion. In [14] we reported on a method for producing metal oxides (CeO2, Fe2O3 and NiO) with a crystallite size less than ≤10 nm by a combination of the sol–gel method and cryotechnology. The essence of the method is to create

• , including a modified sol–gel synthesis of the colloids and their cryogenic processing, was used in the synthesis of nickel, iron and cerium oxide nanopowders. In this case, cerium, iron and nickel nitrates were used as metal sources for the synthesis of metal-containing sols. The sol synthesis was carried

• oxide nanoparticle formation under of sol–gel synthesis in combination with cryotreatment of the sol is presented in Figure 3 using the example of the ceria nanopowder. The process under consideration involves the interaction of hydrolyzed Ce3+ ions with DMOA to form the sol intermediate, A. Then, the

Controllable one-pot synthesis of uniform colloidal TiO₂ particles in a mixed solvent solution for photocatalysis

• Jong Tae Moon,
• Seung Ki Lee and
• Ji Bong Joo

Beilstein J. Nanotechnol. 2018, 9, 1715–1727, doi:10.3762/bjnano.9.163

• Abstract This study reports on the controllable synthesis of uniform colloidal titanium dioxide (TiO2) particles and their photocatalytic applications toward rhodamine B (RhB) degradation. The monodispersed TiO2 particles were synthesized under mixed solvent conditions by sol–gel chemistry in a one-pot

• well as the crystalline properties and performance enhancement of TiO2 photocatalysts calcined at different temperatures. Keywords: mixed solvent; one-pot synthesis; photocatalysts; rhodamine B degradation; sol–gel synthesis; spherical TiO2 particles; Introduction Titanium dioxide (TiO2) is a widely

• , large surface area, uniform photocatalytic activity for each particle, and improved accessibility for the reactant molecules. To fabricate the uniform, colloidal TiO2 spheres, several synthetic methods have been reported including hydrothermal, solvothermal, and sol–gel processes [10][26][28][29

Nitrogen-doped carbon nanotubes coated with zinc oxide nanoparticles as sulfur encapsulator for high-performance lithium/sulfur batteries

• Yan Zhao,
• Zhengjun Liu,
• Liancheng Sun,
• Yongguang Zhang,
• Yuting Feng,
• Xin Wang,
• Indira Kurmanbayeva and
• Zhumabay Bakenov

Beilstein J. Nanotechnol. 2018, 9, 1677–1685, doi:10.3762/bjnano.9.159

• carbon nanotubes coated with zinc oxide nanoparticles (ZnO@NCNT) were prepared via a sol–gel route as sulfur encapsulator for lithium/sulfur (Li/S) batteries. The electrochemical properties of the S/ZnO@NCNT composite cathode were evaluated in Li/S batteries. It delivered an initial capacity of 1032

• providing pathways for ion and electron transport. The as-prepared S/ZnO@NCNT composite is a promising cathode material for Li/S batteries. Keywords: batteries; nanocomposites; sol–gel processes; sulfur; zinc oxide (ZnO); Introduction Due to its high theoretical specific capacity of 1672 mAh·g−1 and

• electrode. Conclusion Nitrogen-doped carbon nanotubes coated with zinc oxide (ZnO@NCNT) were successfully prepared via a sol–gel synthetic route. They exhibit a unique ability to absorb polysulfides and, thus, to improve electrochemical properties of a S cathode. The S/ZnO@NCNT cathode has shown excellent

Sulfur-, nitrogen- and platinum-doped titania thin films with high catalytic efficiency under visible-light illumination

• Boštjan Žener,
• Lev Matoh,
• Giorgio Carraro,
• Bojan Miljević and
• Romana Cerc Korošec

Beilstein J. Nanotechnol. 2018, 9, 1629–1640, doi:10.3762/bjnano.9.155

• suitable for use in environmental related fields such as air and water treatment and self-cleaning surfaces. In this work, titania thin films and powders were prepared by a particulate sol–gel route, using titanium tetrachloride (TiCl4) as a precursor. Afterwards, the prepared sols were doped with nitrogen

• and subsequent degradation was used to fit the experimental data. The results have shown an increase in photocatalytic activity under visible-light illumination of nonmetal and metal doped and co-doped titania thin films compared to an undoped sample. Keywords: doping; photocatalysis; sol–gel

• by the linear combination of the 3p orbitals of S and the 2p orbitals of O [39][40]. In this case, the crystal lattice of TiO2 becomes distorted due to the larger ionic radius of S2− compared to O2−. Among all of the approaches to preparation of titania thin films, the sol–gel method is the most

Correlative electrochemical strain and scanning electron microscopy for local characterization of the solid state electrolyte Li_1.3Al_0.3Ti_1.7(PO₄)₃

• Nino Schön,
• Deniz Cihan Gunduz,
• Shicheng Yu,
• Hermann Tempel,
• Roland Schierholz and
• Florian Hausen

Beilstein J. Nanotechnol. 2018, 9, 1564–1572, doi:10.3762/bjnano.9.148

• . Experimental Synthesis of Li1.3Al0.3Ti1.7(PO4)3 (LATP) The synthesis of Li1.3Al0.3Ti1.7(PO4)3 (LATP) has been described in detail elsewhere [17] and consists of an oxalic acid supported sol–gel process. Binder-free dense LATP pellets as used in this study were obtained by an improved route involving

Cr(VI) remediation from aqueous environment through modified-TiO₂-mediated photocatalytic reduction

• Rashmi Acharya,
• Brundabana Naik and
• Kulamani Parida

Beilstein J. Nanotechnol. 2018, 9, 1448–1470, doi:10.3762/bjnano.9.137

• with further increase in the calcination temperature because of the decrease in the specific surface area induced by the aggregation and agglomeration of particles [157]. TiO2/Fe3O4 composite photocatalysts were synthesized through a polymerizable sol−gel route to investigate the photocatalytic

• photocurrent. Dozzi et al. synthesized a series of titanium–tungsten mixed oxides through coupling of TiO2 with varying WO3 percentage by a base-catalyzed sol–gel method [175]. WO3 plays a vital role in inhibiting charge recombination for efficient charge transfer to enhance the Cr(VI) reduction. Bi2O3

• possesses a narrow band gap (2.8 eV), appropriate valence band position, and similar photocatalytic mechanism to that of TiO2. Hence, it can conveniently be coupled with TiO2 [176][177]. Yang and co-workers prepared Bi2O3/TiO2 coupled photocatalysts by a sol–gel method followed by a hydrothermal technique

Understanding the performance and mechanism of Mg-containing oxides as support catalysts in the thermal dry reforming of methane

• Nor Fazila Khairudin,
• Mohd Farid Fahmi Sukri,
• Mehrnoush Khavarian and
• Abdul Rahman Mohamed

Beilstein J. Nanotechnol. 2018, 9, 1162–1183, doi:10.3762/bjnano.9.108

• CO2/CH4 ratio. The conversion of CO2 and CH4 was in the range of 70 to 80% when the obtained H2/CO ratio was between 1 and 1.5. The influence of the synthesis method on the Ni/Al2O3–MgO catalyst by sol–gel and impregnation techniques was investigated by Hassani Rad et al. [37]. A higher specific

• surface area (178 m2/g) was recorded with the MgO-doped catalyst obtained by the sol–gel method than that obtained using the impregnation method (70 m2/g). As a consequence, the preparation technique significantly affected the catalytic performance of the Ni/Al2O3–MgO catalyst and the Ni/Al2O3–MgO

• catalyst prepared using the sol–gel method, exhibiting large yields for H2, CO, and H2/CO, which were 90%, 98%, and 98%, respectively, at a reaction temperature of 850 °C. Evidently, the application of the sol–gel method and MgO as a support promoter improved the surface area and Ni dispersion and resulted

Single-crystalline FeCo nanoparticle-filled carbon nanotubes: synthesis, structural characterization and magnetic properties

• Rasha Ghunaim,
• Maik Scholz,
• Christine Damm,
• Bernd Rellinghaus,
• Rüdiger Klingeler,
• Bernd Büchner,
• Michael Mertig and
• Silke Hampel

Beilstein J. Nanotechnol. 2018, 9, 1024–1034, doi:10.3762/bjnano.9.95

• devices. Different techniques have been applied for the synthesis of these magnetic nanoparticles (MNPs), such as mechanical alloying [23], electrodeposition [24], radio frequency (rf)-plasma torch [25], sol–gel methods [26][27], reverse micelle systems [28] and thermal decomposition of bimetallic alloys

A review of carbon-based and non-carbon-based catalyst supports for the selective catalytic reduction of nitric oxide

• Shahreen Binti Izwan Anthonysamy,
• Syahidah Binti Afandi,
• Mehrnoush Khavarian and
• Abdul Rahman Bin Mohamed

Beilstein J. Nanotechnol. 2018, 9, 740–761, doi:10.3762/bjnano.9.68

• for preparing a catalyst such as impregnation, sol–gel, incipient-wetness, co-precipitation, electroplating, and the polyol process. Some of the catalysts prepared via these methods can achieve low temperatures of SCR with content resistance of H2O and SO2. Each method is different from the other, and

• ” reaction to improve low-temperature SCR activity. The sol–gel method has been used quite frequently for the development of nano-based catalysts. Basically, certain chemical solutions together with a foaming agent (citric acid) is mixed vigorously by stirring under room temperature to produce a homogeneous

• mixture. Subsequently, the produced sols are dried at a specific temperature for 24 hours in order to obtain xerogel. Then, the xerogel is crushed before being calcined at a desired atmosphere condition and temperature [37]. In the case of catalyst preparation, many researchers have adopted the sol–gel

Synthesis and characterization of two new TiO₂-containing benzothiazole-based imine composites for organic device applications

• Anna Różycka,
• Agnieszka Iwan,
• Krzysztof Artur Bogdanowicz,
• Michal Filapek,
• Natalia Górska,
• Damian Pociecha,
• Marek Malinowski,
• Patryk Fryń,
• Agnieszka Hreniak,
• Jakub Rysz,
• Paweł Dąbczyński and
• Monika Marzec

Beilstein J. Nanotechnol. 2018, 9, 721–739, doi:10.3762/bjnano.9.67

• of imine:TiO2 composites for organic device applications were examined. The investigated titanium dioxide (in anatase form, obtained via the sol–gel method) exhibited a surface area of 59.5 m2/g according to Brunauer–Emmett–Teller theory, and its structure is a combination of both meso- and

• physical parameters of titanium dioxide TiO2 powder was prepared via the sol–gel technique using titanium(IV) isopropoxide (TIPO) as a precursor as was fully described in our previous paper [34]. The obtained TiO2 powder exhibited an anatase form, which was confirmed from X-ray diffraction (XRD

• /polymers or other device architectures. This will be a challenge of our future work. Experimental All chemicals and reagents were used as received from Sigma-Aldrich. Synthesis of TiO2 TiO2 powder was prepared by the sol–gel method using 4.5 mL TIPO dissolved in a solution of 20 mL ethanol and 3.5 mL

Cyclodextrin-assisted synthesis of tailored mesoporous silica nanoparticles

• Fuat Topuz and
• Tamer Uyar

Beilstein J. Nanotechnol. 2018, 9, 693–703, doi:10.3762/bjnano.9.64

• additives in a simple, one-pot reaction system for a wide range of applications. Keywords: cyclodextrin; faceted particles; mesoporous silica nanoparticles (MSN); microporous; Introduction With the availability of several types of surfactants and the increased understanding of sol–gel chemistry, numerous

• a highly challenging task to date. MSNs are commonly synthesized by surfactant-templated sol–gel reactions [12][13]. In this regard, mesoporous silica nanospheres are the most commonly used form of silica particles that are produced using a pore templating agent, such as cetyltrimethylammonium

• structures were produced using a combination of CTAB surfactant, ethylene glycol solvent and NH4OH as the catalyst. MSNs were also reported in branched forms using organosilane precursors in a one-pot, CTAB-directed sol–gel synthesis [17]. For such a system, increasing the ethyl acetate concentration led to

Mechanistic insights into plasmonic photocatalysts in utilizing visible light

• Kah Hon Leong,
• Azrina Abd Aziz,
• Lan Ching Sim,
• Pichiah Saravanan,
• Min Jang and
• Detlef Bahnemann

Beilstein J. Nanotechnol. 2018, 9, 628–648, doi:10.3762/bjnano.9.59

• issues [45][46][47][48][49]. Synthesis routes such as sol–gel, hydrothermal, microwave hydrothermal, impregnation, electrochemical deposition, chemical deposition, deposition-precipitation, UV photodeposition and direct sunlight photodeposition have been reported [23][50][51][52][53][54][55][56][57][58

• ][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86]. The conventional and most frequently used methods are the sol–gel and deposition–precipitation methods. These are mostly widely preferred due to the relatively facile and direct synthesis