Ultrasonication-assisted synthesis of CsPbBr₃ and Cs₄PbBr₆ perovskite nanocrystals and their reversible transformation

• Longshi Rao,
• Xinrui Ding,
• Xuewei Du,
• Guanwei Liang,
• Yong Tang,
• Kairui Tang and
• Jin Z. Zhang

Beilstein J. Nanotechnol. 2019, 10, 666–676, doi:10.3762/bjnano.10.66

• reported to be very sensitive to polar solvents, these methods result in the inevitable degradation of PNCs, especially for iodine-based PNCs [26][27][28]. Therefore, in order to obtain PNCs with high PL QY and stability, it is crucial to develop synthesis methods free of polar-solvents. To date, some

Biomimetic synthesis of Ag-coated glasswing butterfly arrays as ultra-sensitive SERS substrates for efficient trace detection of pesticides

• Guochao Shi,
• Mingli Wang,
• Yanying Zhu,
• Yuhong Wang,
• Xiaoya Yan,
• Xin Sun,
• Haijun Xu and
• Wanli Ma

Beilstein J. Nanotechnol. 2019, 10, 578–588, doi:10.3762/bjnano.10.59

• substrates with low consumption and high EF. However, these synthesis methods are either difficult to control, have a low yield or require harsh experimental conditions as well as sophisticated instrumentation. Hence, a controllable and convenient way to fabricate high-performance SERS substrates would be

Effects of post-lithography cleaning on the yield and performance of CVD graphene-based devices

• Eduardo Nery Duarte de Araujo,
• Thiago Alonso Stephan Lacerda de Sousa,
• Luciano de Moura Guimarães and
• Flavio Plentz

Beilstein J. Nanotechnol. 2019, 10, 349–355, doi:10.3762/bjnano.10.34

• electrical properties to surface phenomena and the existence of several routes for its surface functionalization, grant this 2D material plenty of application possibilities [1][2][3][4][5][6][7][8]. Among the several synthesis methods of high-quality graphene, chemical vapor deposition (CVD) stands out as

Surface plasmon resonance enhancement of photoluminescence intensity and bioimaging application of gold nanorod@CdSe/ZnS quantum dots

• Siyi Hu,
• Yu Ren,
• Yue Wang,
• Jinhua Li,
• Junle Qu,
• Liwei Liu,
• Hanbin Ma and
• Yuguo Tang

Beilstein J. Nanotechnol. 2019, 10, 22–31, doi:10.3762/bjnano.10.3

• fluorescence enhancement by organizing QDs on GNRs, and Anjali Kshirsagar et al. reported the electronic structure of free-standing and gold-attached passivated CdSe nanorods [24][25]. These studies covered the synthesis of GNR@CdSe/ZnS nanoparticles using different methods; however, most of these synthesis

• methods are complicated, and it is difficult to reproduce their preparation and desired applications. It is desirable to find a simple method to synthesize GNR@CdSe/ZnS nanoparticles in aqueous-phase which exhibit high PL emission and optimize the bioconjugated surfaces of these nanoparticles for

Characterization and influence of hydroxyapatite nanopowders on living cells

• Przemyslaw Oberbek,
• Tomasz Bolek,
• Adrian Chlanda,
• Seishiro Hirano,
• Sylwia Kusnieruk,
• Julia Rogowska-Tylman,
• Ganna Nechyporenko,
• Viktor Zinchenko,
• Wojciech Swieszkowski and
• Tomasz Puzyn

Beilstein J. Nanotechnol. 2018, 9, 3079–3094, doi:10.3762/bjnano.9.286

• manufacturing methods, are yet another problem to be taken into consideration. The aim of this work was to investigate the correlation between the properties of nanoscale hydroxyapatite from different synthesis methods and biological activity represented by the viability of four cell lines: A549, CHO, BEAS-2B

• clear relationship between the shape and the cell assay results. Possible mechanisms of HAp NOAA–cell interactions The diversity of physicochemical characteristics of the studied hydroxyapatites, which are the result of the different synthesis methods, allowed for an analysis of the mechanisms of NOAA

• hydroxyapatites obtained through different synthesis methods, their applications and short-term impact on different cells, including an attempt to explain the mechanisms behind the toxic effect. Ten nanosized hydroxyapatite samples manufactured via different methods (combustion chemical vapour condensation, a wet

Layered calcium phenylphosphonate: a hybrid material for a new generation of nanofillers

• Kateřina Kopecká,
• Ludvík Beneš,
• Klára Melánová,
• Vítězslav Zima,
• Petr Knotek and
• Kateřina Zetková

Beilstein J. Nanotechnol. 2018, 9, 2906–2915, doi:10.3762/bjnano.9.269

• presence of phenyl groups on the surface of the layers. In this paper, various CaPhP synthesis methods were studied with the aim of obtaining a product most suitable for its subsequent exfoliation. The liquid-based approach was used for the exfoliation. It was found that the most promising technique for

Impact of the anodization time on the photocatalytic activity of TiO₂ nanotubes

• Jesús A. Díaz-Real,
• Geyla C. Dubed-Bandomo,
• Juan Galindo-de-la-Rosa,
• Luis G. Arriaga,
• Janet Ledesma-García and
• Nicolas Alonso-Vante

Beilstein J. Nanotechnol. 2018, 9, 2628–2643, doi:10.3762/bjnano.9.244

• synthesis methods resulting in a wide range of morphologies, such as mesoporous structures [4], microtubes [5], microdendrites, nanoparticles [6][7][8], nanorods [9][10], nanotubes [11][12][13], nanowires [14], and nanosheets [15][16]. Standing out from the rest of the synthesis techniques, electrochemical

Droplet-based synthesis of homogeneous magnetic iron oxide nanoparticles

• Christian D. Ahrberg,
• Ji Wook Choi and
• Bong Geun Chung

Beilstein J. Nanotechnol. 2018, 9, 2413–2420, doi:10.3762/bjnano.9.226

• synthesis methods, nanoparticles could be obtained (Figure 3). While the particles synthesized in a conventional batch reaction showed a wide dispersion and varying shapes in their TEM images (Figure 3A,B), iron oxide nanoparticles synthesized in droplets were more homogenous in size and shape (Figure 3C,D

The role of adatoms in chloride-activated colloidal silver nanoparticles for surface-enhanced Raman scattering enhancement

• Nicolae Leopold,
• Andrei Stefancu,
• Krisztian Herman,
• István Sz. Tódor,
• Stefania D. Iancu,
• Vlad Moisoiu and
• Loredana F. Leopold

Beilstein J. Nanotechnol. 2018, 9, 2236–2247, doi:10.3762/bjnano.9.208

• and capping agent due to different synthesis methods play secondary roles. Similar to Cl−, the addition of Ag+, Mg2+ or Ca2+ to cit-AgNPs mediates the electronic coupling between citrate and the metallic silver surface (Figure 5B). Indeed, right after adding 1 mM AgNO3 or 10−4 M MgSO4 or Ca(NO3)2, the

Nanocomposites comprised of homogeneously dispersed magnetic iron-oxide nanoparticles and poly(methyl methacrylate)

• Sašo Gyergyek,
• David Pahovnik,
• Ema Žagar,
• Alenka Mertelj,
• Rok Kostanjšek,
• Miloš Beković,
• Marko Jagodič,
• Heinrich Hofmann and
• Darko Makovec

Beilstein J. Nanotechnol. 2018, 9, 1613–1622, doi:10.3762/bjnano.9.153

• enable the preparation of nanocomposite films by spin coating and the precipitation of a nanocomposite in a form that is easily milled into powders, for example. Therefore, it is desirable to develop synthesis methods to prepare them. In this paper we present a simple method for preparing magnetic iron

Understanding the performance and mechanism of Mg-containing oxides as support catalysts in the thermal dry reforming of methane

• Nor Fazila Khairudin,
• Mohd Farid Fahmi Sukri,
• Mehrnoush Khavarian and
• Abdul Rahman Mohamed

Beilstein J. Nanotechnol. 2018, 9, 1162–1183, doi:10.3762/bjnano.9.108

Review on nanoparticles and nanostructured materials: history, sources, toxicity and regulations

• Jaison Jeevanandam,
• Ahmed Barhoum,
• Yen S. Chan,
• Alain Dufresne and
• Michael K. Danquah

Beilstein J. Nanotechnol. 2018, 9, 1050–1074, doi:10.3762/bjnano.9.98

Single-crystalline FeCo nanoparticle-filled carbon nanotubes: synthesis, structural characterization and magnetic properties

• Rasha Ghunaim,
• Maik Scholz,
• Christine Damm,
• Bernd Rellinghaus,
• Rüdiger Klingeler,
• Bernd Büchner,
• Michael Mertig and
• Silke Hampel

Beilstein J. Nanotechnol. 2018, 9, 1024–1034, doi:10.3762/bjnano.9.95

• , shape, arrangement of the magnetic nanoparticles to their magnetic, chemical, mechanical and catalytic properties [18][26][30], it is important to choose synthesis methods which guarantee the control of size and morphology as well as the long-term stability in order to allow these magnetic nanoparticles

A review of carbon-based and non-carbon-based catalyst supports for the selective catalytic reduction of nitric oxide

• Shahreen Binti Izwan Anthonysamy,
• Syahidah Binti Afandi,
• Mehrnoush Khavarian and
• Abdul Rahman Bin Mohamed

Beilstein J. Nanotechnol. 2018, 9, 740–761, doi:10.3762/bjnano.9.68

• . Meanwhile, Mrad et al. [5] reviewed and summarised the use of a hydrocarbon catalyst in the SCR of NO. However, not much effort has been made to summarise the progress of catalyst synthesis methods to achieve catalytic activity at low-temperature SCR. Therefore, this paper addresses this gap by reviewing

• -precipitation method. An enhanced performance of the MnOx catalyst was observed due to the strong interaction between Mn and Eu, which hinders the MnOx crystallisation process. Overall, there are various types of synthesis methods (impregnation, sol–gel, co-precipitation, incipient wetness, and pyridine thermal

• treatment enables the covalent attachment of oxygenated groups on the surface and the open ends of the CNTs. After undergoing pre-treatment, the treated-CNTs will be dispersed with the choice of metal species. In the next step, several synthesis methods are applied such as impregnation, pyridine thermal

Mechanistic insights into plasmonic photocatalysts in utilizing visible light

• Kah Hon Leong,
• Azrina Abd Aziz,
• Lan Ching Sim,
• Pichiah Saravanan,
• Min Jang and
• Detlef Bahnemann

Beilstein J. Nanotechnol. 2018, 9, 628–648, doi:10.3762/bjnano.9.59

• form aldehyde. Table 1 comprehensively presents the various synthesis routes for fabrication of LPSR-induced photocatalysts. Interestingly, the fabrication of plasmonic photocatalysts using sustainable approaches showed better performance as compared to the conventional synthesis methods. The mechanism

Green synthesis of fluorescent carbon dots from spices for in vitro imaging and tumour cell growth inhibition

• Nagamalai Vasimalai,
• Vânia Vilas-Boas,
• Juan Gallo,
• María de Fátima Cerqueira,
• Mario Menéndez-Miranda,
• José Manuel Costa-Fernández,
• Lorena Diéguez,
• Begoña Espiña and
• María Teresa Fernández-Argüelles

Beilstein J. Nanotechnol. 2018, 9, 530–544, doi:10.3762/bjnano.9.51

• . Generally, the synthesis of C-dots is a multistep and tedious procedure, which is often expensive. Moreover, a surface passivation with other ligands or additives is frequently needed in order to obtain exacerbated intrinsic fluorescence properties [5][12][13]. Recently, green synthesis methods of C-dots

Influence of the preparation method on the photocatalytic activity of Nd-modified TiO₂

• Patrycja Parnicka,
• Paweł Mazierski,
• Tomasz Grzyb,
• Wojciech Lisowski,
• Ewa Kowalska,
• Bunsho Ohtani,
• Adriana Zaleska-Medynska and
• Joanna Nadolna

Beilstein J. Nanotechnol. 2018, 9, 447–459, doi:10.3762/bjnano.9.43

• , we presented experimental studies concerning the effect of synthesis methods on lanthanide-modified TiO2. In these studies we compared hydrothermal and sol–gel method. The synthesis method significantly affects the structure, optical, luminescence and photocatalytic properties. It was found that all

• and Nd-modified TiO2, and an irregular shape of particles can be clearly observed. Moreover, aggregation occurred in all samples. These images show no change in particle morphology due to Nd loading. The shape of particles does not show much difference between the synthesis methods. However, it seems

• of Nd3+ ions on the surface of TiO2 NPs can be conveniently exploited for a variety of environmental purification processes. We presented the experimental studies concerning the effect of synthesis methods on the photocatalytic activity of Nd-modified TiO2. Nanocrystalline anatase-phase TiO2 NPs were

Enhanced photoelectrochemical water splitting performance using morphology-controlled BiVO₄ with W doping

• Xin Zhao and
• Zhong Chen

Beilstein J. Nanotechnol. 2017, 8, 2640–2647, doi:10.3762/bjnano.8.264

• improved by the formation of the nanoporous structure. This reason for such an opposite tread remains unknown, and requires further work in the future. We suspect different synthesis methods may have a greater influence on the surface states, which leads to different charge transfer efficiencies

Towards molecular spintronics

• Georgeta Salvan and
• Dietrich R. T. Zahn

Beilstein J. Nanotechnol. 2017, 8, 2464–2466, doi:10.3762/bjnano.8.245

• applications. Horizontally stacked two-terminal and four-terminal devices photo sensors and magnetic field sensors were developed for large-scale integration purposes. This complex research and development chain required various synthesis methods and theoretical approaches for prediction of molecular and

In situ controlled rapid growth of novel high activity TiB₂/(TiB₂–TiN) hierarchical/heterostructured nanocomposites

• Jilin Wang,
• Hejie Liao,
• Yuchun Ji,
• Fei Long,
• Yunle Gu,
• Zhengguang Zou,
• Weimin Wang and
• Zhengyi Fu

Beilstein J. Nanotechnol. 2017, 8, 2116–2125, doi:10.3762/bjnano.8.211

• synthesis methods and high-energy ball milling assisted methods with heat treatment using Ti, B, BN and TiH2 as raw materials [1][2][3][11][12][13]. Based on the previous works, it is known that the high-energy ball milling assisted heat treatment method requires long milling time (30–40 h) and high energy

Systematic control of α-Fe₂O₃ crystal growth direction for improved electrochemical performance of lithium-ion battery anodes

• Nan Shen,
• Miriam Keppeler,
• Barbara Stiaszny,
• Holger Hain,
• Filippo Maglia and
• Madhavi Srinivasan

Beilstein J. Nanotechnol. 2017, 8, 2032–2044, doi:10.3762/bjnano.8.204

• for micrometer-sized materials, but becomes feasible for their nanostructured derivatives [9][11][16][17][18][19][20]. Therefore, morphology control and nanostructuring of α-Fe2O3 is of great topical importance. Among several synthesis methods for α-Fe2O3 crystal phases, including precipitation and

Self-assembly of chiral fluorescent nanoparticles based on water-soluble L-tryptophan derivatives of p-tert-butylthiacalix[4]arene

• Pavel L. Padnya,
• Irina A. Khripunova,
• Olga A. Mostovaya,
• Timur A. Mukhametzyanov,
• Vladimir G. Evtugyn,
• Vyacheslav V. Vorobev,
• Yuri N. Osin and
• Ivan I. Stoikov

Beilstein J. Nanotechnol. 2017, 8, 1825–1835, doi:10.3762/bjnano.8.184

• templating synthesis methods makes it possible to obtain a wide range of the structures with binding centers preorganized and rigidly fixed in space. Besides, the preparation of water-soluble fluorescent compounds is a perspective field, which opens the possibility for detecting various water-soluble

Two-dimensional carbon-based nanocomposites for photocatalytic energy generation and environmental remediation applications

• Suneel Kumar,
• Ashish Kumar,
• Ashish Bahuguna,
• Vipul Sharma and
• Venkata Krishnan

Beilstein J. Nanotechnol. 2017, 8, 1571–1600, doi:10.3762/bjnano.8.159

• insolubility of g-C3N4 in most of the known solvents is one main hurdle for easy synthesis of its g-C3N4 based nanocomposites. Recently, layered g-C3N4 based nanocomposites have attracted much attention because of reports on some simple synthesis methods [68]. The g-C3N4 and its nanocomposites with

Bright fluorescent silica-nanoparticle probes for high-resolution STED and confocal microscopy

• Isabella Tavernaro,
• Christian Cavelius,
• Henrike Peuschel and
• Annette Kraegeloh

Beilstein J. Nanotechnol. 2017, 8, 1283–1296, doi:10.3762/bjnano.8.130

• agglomeration and stability) and the fluorescence properties of the obtained particles were compared to particles from commonly known synthesis methods. As a result, the spectroscopic characteristics of the presented monodisperse dye-doped silica nanoparticles were similar to those of the free uncoupled dyes

• narrow size distribution in the range of 100 nm to several micrometres, the method is less suited for the synthesis of silica nanoparticles with a narrow dispersity in the size regime below 100 nm. Thus many research studies have been based on this approach, developing new synthesis methods of

• –CS–APTES on the particle synthesis and the physical particle attributes can be excluded. Comparison of FD particles with Stöber synthesis and C-dots synthesis Furthermore, the above presented Atto647N-doped silica nanoparticles were compared to silica nanoparticles of other literature-known synthesis

Needs and challenges for assessing the environmental impacts of engineered nanomaterials (ENMs)

• Michelle Romero-Franco,
• Hilary A. Godwin,
• Muhammad Bilal and
• Yoram Cohen

Beilstein J. Nanotechnol. 2017, 8, 989–1014, doi:10.3762/bjnano.8.101