Photoactive nanoarchitectures based on clays incorporating TiO₂ and ZnO nanoparticles

• Eduardo Ruiz-Hitzky,
• Pilar Aranda,
• Marwa Akkari,
• Nithima Khaorapapong and
• Makoto Ogawa

Beilstein J. Nanotechnol. 2019, 10, 1140–1156, doi:10.3762/bjnano.10.114

• often on the external surface of clay minerals [8][11]. The particle shape and size have been evaluated by transmission electron microscopy (TEM) and X-ray diffraction (XRD) using the Scherrer equation, in addition to the spectroscopic information obtained from the shift of the UV–vis absorption band to

Synthesis and characterization of quaternary La(Sr)S–TaS₂ misfit-layered nanotubes

• Marco Serra,
• Erumpukuthickal Ashokkumar Anumol,
• Dalit Stolovas,
• Iddo Pinkas,
• Ernesto Joselevich,
• Reshef Tenne,
• Andrey Enyashin and
• Francis Leonard Deepak

Beilstein J. Nanotechnol. 2019, 10, 1112–1124, doi:10.3762/bjnano.10.111

• electron microscopy (SEM) was done by LEO model Supra 55VP SEM. Transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) were performed on a Titan Themis 80-300 microscope with probe and image spherical aberration (Cs) correctors, at 200 kV. Energy-dispersive X-ray

Scavenging of reactive oxygen species by phenolic compound-modified maghemite nanoparticles

• Małgorzata Świętek,
• Yi-Chin Lu,
• Rafał Konefał,
• Liliana P. Ferreira,
• M. Margarida Cruz,
• Yunn-Hwa Ma and
• Daniel Horák

Beilstein J. Nanotechnol. 2019, 10, 1073–1088, doi:10.3762/bjnano.10.108

• the amount of DPPH radicals by half. IC50 values were calculated from the linear dependence of the absorbance on the concentration of a phenolic compound. Each experiment was performed in triplicate. Transmission electron microscopy (TEM). An FEI Tecnai G2 Spirit TEM microscope (Brno, Czech Republic

Correlation of surface-enhanced Raman scattering (SERS) with the surface density of gold nanoparticles: evaluation of the critical number of SERS tags for a detectable signal

• Vincenzo Amendola

Beilstein J. Nanotechnol. 2019, 10, 1016–1023, doi:10.3762/bjnano.10.102

• different Raman reporters that are resonant at 633 nm, and their stabilization with a biocompatible and hydrophilic coating. Their performance was tested by correlating the Raman signal to the density of Au nanotags (AuNTs) per unit area, as obtained by transmission electron microscopy (TEM) analysis of the

• previously reported [43]. Transmission electron microscopy (TEM) was performed on an FEI Tecnai G2 12 instrument operating at 100 kV and equipped with a TVIPS CCD camera. The micro-Raman measurements were recorded with a 20× (NA 0.40, 64% coverage) or a 50× (NA 0.75, 100% coverage) Olympus objective on the

Structural and optical properties of penicillamine-protected gold nanocluster fractions separated by sequential size-selective fractionation

• Xiupei Yang,
• Zhengli Yang,
• Fenglin Tang,
• Jing Xu,
• Maoxue Zhang and
• Martin M. F. Choi

Beilstein J. Nanotechnol. 2019, 10, 955–966, doi:10.3762/bjnano.10.96

• fractionation, the crude AuNCs and fractions obtained from SSSP have been investigated by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), nuclear magnetic resonance (NMR), and UV–vis absorption together with photoluminescence (PL) spectroscopy. Experimental Chemicals and

Effects of gold and PCL- or PLLA-coated silica nanoparticles on brain endothelial cells and the blood–brain barrier

• Aniela Bittner,
• Angélique D. Ducray,
• Hans Rudolf Widmer,
• Michael H. Stoffel and
• Meike Mevissen

Beilstein J. Nanotechnol. 2019, 10, 941–954, doi:10.3762/bjnano.10.95

• was removed and the remaining MTT-formazan was dissolved in DMSO (Sigma, Switzerland). Absorbance was measured at 540 nm using a plate reader (Synergy HT, BioTek, Switzerland). Nanoparticle uptake PCL-, PLLA- and Au-NP uptake was investigated using transmission electron microscopy (TEM). PCL- and PLLA

Synthesis of novel C-doped g-C₃N₄ nanosheets coupled with CdIn₂S₄ for enhanced photocatalytic hydrogen evolution

• Jingshuai Chen,
• Chang-Jie Mao,
• Helin Niu and
• Ji-Ming Song

Beilstein J. Nanotechnol. 2019, 10, 912–921, doi:10.3762/bjnano.10.92

• samples were characterized by transmission electron microscopy (TEM) images. As can be seen in Figure 4a,b, the CCN sample displays a representative two-dimensional layered structure that is ultrathin. After the addition of CdIn2S4 to form the heterojunction with CCN, the CdIn2S4 crystals are attached to

• , CISCCN5 and CISCCN10, respectively. Pure CdIn2S4 (CIS) was also synthesized by the same hydrothermal method but without adding CCN. Characterization The as-prepared products were characterized by transmission electron microscopy (TEM) (JEM-2100, JEOL, Japan), Fourier-transform infrared spectroscopy (FTIR

The systemic effect of PEG-nGO-induced oxidative stress in vivo in a rodent model

• Qura Tul Ain,
• Samina Hyder Haq,
• Abeer Alshammari,
• Moudhi Abdullah Al-Mutlaq and
• Muhammad Naeem Anjum

Beilstein J. Nanotechnol. 2019, 10, 901–911, doi:10.3762/bjnano.10.91

• ). Graphene oxide sheets (GOS) were synthesized via a modified Hummer's method and were characterized by X-ray diffraction (XRD), ultraviolet–visible spectroscopy (UV), and transmission electron microscopy (TEM). The method of Zhang was adopted for cracking of GOS. Then nano-graphene oxide was PEGylated with

• epoxide groups [42]. A red-shift of λmax to 260 nm is observed for PEG-nGO [44]. Transmission electron microscopy Transmission electron microscopy (TEM) was used to examine the morphology of GO, nGO, and PEG-nGO. A wrinkled sheet of GO, and round-shaped nGO, appeared under TEM (JEOL TEM-1400 Plus

Co-doped MnFe₂O₄ nanoparticles: magnetic anisotropy and interparticle interactions

• Bagher Aslibeiki,
• Parviz Kameli,
• Hadi Salamati,
• Giorgio Concas,
• Maria Salvador Fernandez,
• Alessandro Talone,
• Giuseppe Muscas and
• Davide Peddis

Beilstein J. Nanotechnol. 2019, 10, 856–865, doi:10.3762/bjnano.10.86

• the Miller indices. Transmission electron microscopy (TEM) analysis was performed with a JEM-2100 instrument using an accelerating voltage of 200 kV, with the nanoparticles deposited on a copper grid. The average particle size was obtained by measuring the diameter of more than 100 particles randomly

Synthesis of MnO₂–CuO–Fe₂O₃/CNTs catalysts: low-temperature SCR activity and formation mechanism

• Yanbing Zhang,
• Lihua Liu,
• Yingzan Chen,
• Xianglong Cheng,
• Chengjian Song,
• Mingjie Ding and
• Haipeng Zhao

Beilstein J. Nanotechnol. 2019, 10, 848–855, doi:10.3762/bjnano.10.85

• optimal load of 4%. Characterization techniques X-ray diffraction (XRD) was measured with an X'Pert Pro MPD X-ray diffractometer using Cu Kα radiation (λ = 0.15406 nm) with a 2θ range from 5° to 80°. Transmission electron microscopy (TEM) was performed on a JEOL model JEM 2010 EX instrument. Temperature

Tungsten disulfide-based nanocomposites for photothermal therapy

• Tzuriel Levin,
• Hagit Sade,
• Rina Ben-Shabbat Binyamini,
• Maayan Pour,
• Iftach Nachman and
• Jean-Paul Lellouche

Beilstein J. Nanotechnol. 2019, 10, 811–822, doi:10.3762/bjnano.10.81

• the temperature range of 30–800 °C. Weight change and heat flow were measured simultaneously during the analysis. The results were processed using STARe evaluation software (Mettler-Toledo, Greifensee, Switzerland). Transmission electron microscopy (TEM) images were acquired by a Tecnai Spirit Bio

Polydopamine-coated Au nanorods for targeted fluorescent cell imaging and photothermal therapy

• Boris N. Khlebtsov,
• Andrey M. Burov,
• Timofey E. Pylaev and
• Nikolai G. Khlebtsov

Beilstein J. Nanotechnol. 2019, 10, 794–803, doi:10.3762/bjnano.10.79

• suspension was then centrifuged at 12000g for 10 min twice, the supernatant was decanted and the pellet was resuspended in 10 mM PBS buffer or serum-free DMEM. Measurements Extinction spectra were measured with a Specord 250 spectrophotometer (Analytik, Jena, Germany). Transmission electron microscopy (TEM

Ultrasonication-assisted synthesis of CsPbBr₃ and Cs₄PbBr₆ perovskite nanocrystals and their reversible transformation

• Longshi Rao,
• Xinrui Ding,
• Xuewei Du,
• Guanwei Liang,
• Yong Tang,
• Kairui Tang and
• Jin Z. Zhang

Beilstein J. Nanotechnol. 2019, 10, 666–676, doi:10.3762/bjnano.10.66

• 50–250 μL of water was added to 5.0 mL of the pre-synthesized Cs4PbBr6 PNCs solution and shaken slightly, which is a modification of the work reported by Wu and co-workers [20]. Characterizations The crystal surface morphology of the PNCs was characterized by transmission electron microscopy (TEM

Enhancement in thermoelectric properties due to Ag nanoparticles incorporated in Bi₂Te₃ matrix

• Srashti Gupta,
• Dinesh Chandra Agarwal,
• Bathula Sivaiah,
• Sankarakumar Amrithpandian,
• Kandasami Asokan,
• Ajay Dhar,
• Binaya Kumar Panigrahi,
• Devesh Kumar Avasthi and
• Vinay Gupta

Beilstein J. Nanotechnol. 2019, 10, 634–643, doi:10.3762/bjnano.10.63

• silver (Ag) nano-inclusions (0, 2, 5, 10, 15 and 20 wt %). Transmission electron microscopy (TEM) images of Ag incorporated in Bi2Te3 annealed at 573 K shows tubular, pentagonal, trigonal, circular and hexagonal nanoparticles with sizes of 6–25 nm (for 5 wt % Ag ) and 7–30 nm (for 20 wt % Ag). Ag

• characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and thermoelectric measurements. XRD measurements were performed using a Bruker D8 Avance diffractometer with Cu Kα (1.5406 Å) radiation. TEM investigations were carried out using a LIBRA 200 FE HRTEM. Gatan software [22] was used

• with Bi2Te3. High-resolution transmission electron microscopy Transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) images of Bi2Te3:Ag samples annealed at 573 K are shown in Figure 3. Figure 3a,b shows the bright-field image and the HRTEM image of the as-prepared Bi2Te3 samples with

Ceria/polymer nanocontainers for high-performance encapsulation of fluorophores

• Kartheek Katta,
• Dmitry Busko,
• Yuri Avlasevich,
• Katharina Landfester,
• Stanislav Baluschev and
• Rafael Muñoz-Espí

Beilstein J. Nanotechnol. 2019, 10, 522–530, doi:10.3762/bjnano.10.53

• groups per nm2 was obtained for samples NC and NC(Ar). Transmission electron microscopy (TEM) was carried out with a Jeol 1400 microscope at an acceleration voltage of 200 kV. Samples for TEM observation were prepared by dropping the diluted dispersions on carbon-coated copper grids and dried. Scanning

Reduced graphene oxide supported C₃N₄ nanoflakes and quantum dots as metal-free catalysts for visible light assisted CO₂ reduction

• Md Rakibuddin and
• Haekyoung Kim

Beilstein J. Nanotechnol. 2019, 10, 448–458, doi:10.3762/bjnano.10.44

• , X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy (TEM), and UV–vis spectroscopy. High-resolution TEM images clearly show that C3N4 QDs (average diameter of 2–3 nm) and NFs (≈20–45 nm) are

Gold nanoparticles embedded in a polymer as a 3D-printable dichroic nanocomposite material

• Lars Kool,
• Anton Bunschoten,
• Aldrik H. Velders and
• Vittorio Saggiomo

Beilstein J. Nanotechnol. 2019, 10, 442–447, doi:10.3762/bjnano.10.43

• brownish reflection and a purple transmission (Figure 1a). The nanoparticle solution was studied by transmission electron microscopy (TEM), showing that it was composed of polydisperse elongated nanoparticles of 50–60 nm with a mean aspect ratio of 1.4 (Figure 1b and Supporting Information File 1, Figure

Improving control of carbide-derived carbon microstructure by immobilization of a transition-metal catalyst within the shell of carbide/carbon core–shell structures

• Teguh Ariyanto,
• Jan Glaesel,
• Andreas Kern,
• Gui-Rong Zhang and
• Bastian J. M. Etzold

Beilstein J. Nanotechnol. 2019, 10, 419–427, doi:10.3762/bjnano.10.41

• microscope (Philips XL30 FEG, 30 kV) equipped with an EDAX X-ray detector. Transmission electron microscopy (TEM) images were captured using a JEOL JEM-2100F microscope operated at 200 kV. The TEM samples were prepared by placing a drop of catalyst powder dispersion in deionized water onto a carbon-coated Au

Integration of LaMnO_3+δ films on platinized silicon substrates for resistive switching applications by PI-MOCVD

• Raquel Rodriguez-Lamas,
• Dolors Pla,
• Odette Chaix-Pluchery,
• Benjamin Meunier,
• Fabrice Wilhelm,
• Andrei Rogalev,
• Laetitia Rapenne,
• Xavier Mescot,
• Quentin Rafhay,
• Hervé Roussel,
• Michel Boudard,
• Carmen Jiménez and
• Mónica Burriel

Beilstein J. Nanotechnol. 2019, 10, 389–398, doi:10.3762/bjnano.10.38

• nanostructure growth was further analyzed in cross section by transmission electron microscopy (TEM), a JEOL 2011 equipment operating at 200 kV with a 0.19 nm point-to-point resolution. X-ray absorption near-edge spectroscopy (XANES) spectra at the Mn K-edge of LMO thin films were collected at the ESRF ID12

Sub-wavelength waveguide properties of 1D and surface-functionalized SnO₂ nanostructures of various morphologies

• Venkataramana Bonu,
• Binaya Kumar Sahu,
• Arindam Das,
• Sankarakumar Amirthapandian,
• Sandip Dhara and
• Harish C. Barshilia

Beilstein J. Nanotechnol. 2019, 10, 379–388, doi:10.3762/bjnano.10.37

• scanning electron microscopy (FESEM; Zeiss SUPRA 55) images. The crystallographic information of the NWs was investigated with the aid of transmission electron microscopy (TEM; Zeiss Libra 200). Micro-Raman spectroscopy (InVia, Reinshaw) at 514.5 nm excitation, with a 1800 grooves/mm grating, and

A Ni(OH)₂ nanopetals network for high-performance supercapacitors synthesized by immersing Ni nanofoam in water

• Donghui Zheng,
• Man Li,
• Yongyan Li,
• Chunling Qin,
• Yichao Wang and
• Zhifeng Wang

Beilstein J. Nanotechnol. 2019, 10, 281–293, doi:10.3762/bjnano.10.27

• an X-ray energy dispersive spectroscope (EDS) and a transmission electron microscopy (TEM, JEOL JEM-2100). The preparation process of the TEM sample was as follows: Firstly, the active materials were scraped off with a knife. Then the materials were dispersed in ethanol with ultrasonic vibration

Relation between thickness, crystallite size and magnetoresistance of nanostructured La_1−xSr_xMn_yO_3±δ films for magnetic field sensors

• Rasuole Lukose,
• Valentina Plausinaitiene,
• Milita Vagner,
• Nerija Zurauskiene,
• Skirmantas Kersulis,
• Virgaudas Kubilius,
• Karolis Motiejuitis,
• Birute Knasiene,
• Voitech Stankevic,
• Zita Saltyte,
• Martynas Skapas,
• Algirdas Selskis and
• Evaldas Naujalis

Beilstein J. Nanotechnol. 2019, 10, 256–261, doi:10.3762/bjnano.10.24

• electron microscopy (TEM) analysis (Figure 1a,b) shows the column-like growth with larger dimensions and more dense, close packing of the crystallites for the II series. Film composition, structure and surface morphology Figure 2a–c presents scanning electron microscopy (SEM) images of the films with

• series of films of variable thickness were deposited: I – one source with LSMO solution, II – 2 separate sources, LSMO solution and solvent source (Figure 1). The growth rate was controlled by application of additional solvent, resulting in the dilution of the precursor in the gas phase. The transmission

Thermal control of the defunctionalization of supported Au₂₅(glutathione)₁₈ catalysts for benzyl alcohol oxidation

• Zahraa Shahin,
• Hyewon Ji,
• Rodica Chiriac,
• Nadine Essayem,
• Franck Rataboul and
• Aude Demessence

Beilstein J. Nanotechnol. 2019, 10, 228–237, doi:10.3762/bjnano.10.21

• S1, Supporting Information File 1). The transmission electron microscopy (TEM) image shows that the ZrO2 particles have a diameter of around 50 nm. Au25(SG)18 was synthesized according to a reported method [33]. The characterization of the clusters by UV–vis spectroscopy shows two absorption peaks

• °C) in a 70 µL alumina crucible, under air. The final temperature was maintained for 12 hours. Transmission electron microscopy (TEM) was carried out on a JEOL 2010 LaB6 microscope operating at 200 kV. The samples were prepared on a copper grid for analysis. The measurement of the diameter of the

Study of silica-based intrinsically emitting nanoparticles produced by an excimer laser

• Imène Reghioua,
• Mattia Fanetti,
• Sylvain Girard,
• Diego Di Francesca,
• Simonpietro Agnello,
• Layla Martin-Samos,
• Marco Cannas,
• Matjaz Valant,
• Melanie Raine,
• Marc Gaillardin,
• Nicolas Richard,
• Philippe Paillet,
• Aziz Boukenter,
• Youcef Ouerdane and
• Antonino Alessi

Beilstein J. Nanotechnol. 2019, 10, 211–221, doi:10.3762/bjnano.10.19

• produced nanoparticles, we recorded transmission electron microscopy (TEM) and scanning transmission electron microscope (STEM) images of the samples. Figure 3a illustrates the TEM image recorded for the same nanoparticles previously studied by EDX and SEM (red square named 1 in Figure 1a. Figure 3b

pH-mediated control over the mesostructure of ordered mesoporous materials templated by polyion complex micelles

• Emilie Molina,
• Mélody Mathonnat,
• Jason Richard,
• Patrick Lacroix-Desmazes,
• Martin In,
• Philippe Dieudonné,
• Thomas Cacciaguerra,
• Corine Gérardin and
• Nathalie Marcotte

Beilstein J. Nanotechnol. 2019, 10, 144–156, doi:10.3762/bjnano.10.14

• empty capillary. Transmission electron microscopy (TEM) images were acquired on microtomed samples (slices of ≈70 nm thickness) with a JEOL 1200 EX II instrument operating at 120 kV. Material characterization by scanning electron microscopy (SEM) was done on a HITACHI S4800 (FEG-HR) apparatus operating