The trans-influence in gold chemistry from a catalytic perspective

• Manfred Bochmann

Beilstein J. Org. Chem. 2026, 22, 838–856, doi:10.3762/bjoc.22.66

• gold(III) complexes has more recently become a focus of interest. Although often underestimated or not considered, the ligand trans-influence is a crucial factor in determining the reactivity of gold(III) compounds; it modifies not only bond polarisation, dissociation energies and thermal stability but

• an important role, affecting reaction rates, thermal stability, reaction pathways and selectivity. Various approaches have been taken to quantify these effects. Given the ubiquitous nature of gold(I) complexes LAuX and the fact that in such systems steric effects tend to be negligible, many studies

• reactivity and thermal stability. Tridentate C^N^C ligands have been particularly successful in allowing the isolation of species that have often been postulated in catalytic cycles but have remained elusive until recently. These include the first gold(III) ethylene complex, some 180 years after its platinum

Halogenated azobenzene acrylates: from efficient solution photoswitching to stable solid-state photochromic materials

• Martina Vachtlová,
• Michaela Fecková,
• Vítězslav Zima,
• Jan Podlesný,
• Milan Klikar,
• Oldřich Pytela,
• Patrik Pařík,
• Jakub Opršal,
• Eliška Juhaňáková,
• Veronika Chrtová and
• Filip Bureš

Beilstein J. Org. Chem. 2026, 22, 782–794, doi:10.3762/bjoc.22.60

• noticeable. The eventual thermal back Z → E switching was investigated in the dark at 60 °C during 14 h revealing a minor change in the shade and pointing to a high thermal stability of Z-1a in the polystyrene film. Azobenzene 1a was also copolymerized with an acrylate matrix. The photoswitching performance

Get a better glimpse on sequential photoreactions of trisnorbornadienes with ¹⁹F NMR spectroscopy

• Julian Felix Maria Hebborn,
• Ben Eric Merten,
• Thomas Paululat and
• Heiko Ihmels

Beilstein J. Org. Chem. 2026, 22, 527–534, doi:10.3762/bjoc.22.38

• substituents has been examined in more detail for 2-cyano-3-arylnorbornadienes. And these studies have shown that the substituents in ortho position lead to an increased thermal stability in comparison with the meta and para-substituted isomers [54]. Although the longer half-life of the trisquadricyclane may

Configuration–packing synergy enabling integrated crystalline-state RTP and amorphous-state TADF

• Ruiyan Wang and
• Yunan Wu

Beilstein J. Org. Chem. 2026, 22, 224–236, doi:10.3762/bjoc.22.16

• spin–orbit coupling in determining the emission behavior of organic materials, particularly in amorphous states where the TADF process becomes the dominant emission pathway under thermal activation. The thermal stability of compound 1 was evaluated using thermogravimetric analysis (TGA) and

• differential scanning calorimetry (DSC). The results show that 1 exhibits excellent thermal stability. As shown in Figure 8, TGA measurements indicate a 5% weight-loss temperature of 354 °C, suggesting that the material undergoes significant decomposition at temperatures much higher than those typically

• moderate temperatures, with limited molecular motion, making it resistant to thermal-induced morphological relaxation and performance drift. The Tm establishes the upper temperature limit for the solid-to-melt transition of the material. The excellent thermal stability of compound 1 makes it suitable for

Symmetrical D–π–A–π–D indanone dyes: a new design for nonlinear optics and cyanide detection

• Ergin Keleş,
• Alberto Barsella,
• Nurgül Seferoğlu,
• Zeynel Seferoğlu and
• Burcu Aydıner

Beilstein J. Org. Chem. 2026, 22, 131–142, doi:10.3762/bjoc.22.6

• NLO responses over inorganic counterparts [8][9][10]. Conjugated organic molecules containing electron-donating and accepting groups exhibit higher second-order nonlinearity due to having planar structures, long π-conjugations, and thermal stability [11]. Organic dyes that display efficient second

• have higher polarizability values and dipole moments (μ) than 2c. TGA analysis Thermogravimetric analyses (TGA) were performed to determine the thermal stability of the dyes. The TGA method allows the determination of thermal and gravimetric changes in the material following temperature increases. Dyes

Silica gel with covalently attached bambusuril macrocycle for dicyanoaurate sorption from water

• Michaela Šusterová and
• Vladimír Šindelář

Beilstein J. Org. Chem. 2025, 21, 2604–2611, doi:10.3762/bjoc.21.201

• minimal decomposition at temperatures below 800 °C as confirmed by the analysis. In contrast, a-SG, SG-NHCO-BU1, and SG-BU1 exhibited reduced thermal stability due to the presence of organic substituents (Figure 1A and Supporting Information File 1, Figure S1C). A weight loss of 10% for BU1, SG-NHCO-BU1

Rotaxanes with integrated photoswitches: design principles, functional behavior, and emerging applications

• Jullyane Emi Matsushima,
• Khushbu,
• Zuliah Abdulsalam,
• Udyogi Navodya Kulathilaka Conthagamage and
• Víctor García-López

Beilstein J. Org. Chem. 2025, 21, 2345–2366, doi:10.3762/bjoc.21.179

• -stilbenes have 5-membered rings fused to the carbon–carbon double bond, are more photostable, and undergo reversible photoisomerization with higher efficiency (Figure 2) [75]. Notably, their cis isomer exhibits higher thermal stability than that of other commonly used photoswitches, such as azobenzene. This

C2 to C6 biobased carbonyl platforms for fine chemistry

• Jingjing Jiang,
• Muhammad Noman Haider Tariq,
• Florence Popowycz,
• Yanlong Gu and
• Yves Queneau

Beilstein J. Org. Chem. 2025, 21, 2103–2172, doi:10.3762/bjoc.21.165

Chiral phosphoric acid-catalyzed asymmetric synthesis of helically chiral, planarly chiral and inherently chiral molecules

• Wei Liu and
• Xiaoyu Yang

Beilstein J. Org. Chem. 2025, 21, 1864–1889, doi:10.3762/bjoc.21.145

• terminal aromatic rings [17]. Despite lacking asymmetric stereogenic centers, this nonplanar scaffold exhibits intrinsic P/M chirality due to the helical arrangement of the π-extended skeleton. Renowned for their high thermal stability and structural rigidity, chiral helicenes have emerged as prominent

• , thermal stability studies demonstrated high configurational stability of these planarly chiral macrocycles, a critical feature that enhances their potential for future utility. In 2023, Zhao and co-worker reported the asymmetric synthesis of planarly chiral paracyclophanes through either catalytic kinetic

Photoswitches beyond azobenzene: a beginner’s guide

• Michela Marcon,
• Christoph Haag and
• Burkhard König

Beilstein J. Org. Chem. 2025, 21, 1808–1853, doi:10.3762/bjoc.21.143

• strongly overlapped, resulting in a less efficient switching. Conversely, di-ortho-chlorinated 9f has lower thermal stability because of the steric clash with the bulky chlorine substituents (Figure 5). An interesting study shows how the Z-isomer thermal lifetime changes between two phenylazoindole

• with bulky N-substitution suggest that the conformation is twisted, with reduced conjugation. Steric hindrance at the indoxyl nitrogen also provides higher thermal stability of the E-isomer, with mixtures of E and Z found at thermal equilibrium [77]. Heteroaromatic substitution in hemiindigo generates

• irradiation, but very strong electron donors were found to slow down the isomerisation, which was also complemented by a strong red-shift of the absorption spectrum [78]. Moreover, the thermal stability is also affected. To obtain red-shifted photoswitches, which are also thermally stable, electron-donating

Influence of the cation in hypophosphite-mediated catalyst-free reductive amination

• Natalia Lebedeva,
• Fedor Kliuev,
• Olesya Zvereva,
• Klim Biriukov,
• Evgeniya Podyacheva,
• Maria Godovikova,
• Oleg I. Afanasyev and
• Denis Chusov

Beilstein J. Org. Chem. 2025, 21, 1661–1670, doi:10.3762/bjoc.21.130

• pH 0) [19], and usage of an additional amount of base leads to stronger reductive properties. Moreover, the role of the cation could be critical for the thermal stability against disproportionation or aerobic oxidation of hypophosphite [38]; salts with larger cations are also more soluble in organic

Ambident reactivity of enolizable 5-mercapto-1H-tetrazoles in trapping reactions with in situ-generated thiocarbonyl S-methanides derived from sterically crowded cycloaliphatic thioketones

• Grzegorz Mlostoń,
• Małgorzata Celeda,
• Marcin Palusiak,
• Heinz Heimgartner,
• Marta Denel-Bobrowska and
• Agnieszka B. Olejniczak

Beilstein J. Org. Chem. 2025, 21, 1508–1519, doi:10.3762/bjoc.21.113

• thiocarbonyl S-methanides 1a and 1b, respectively, in situ generated at 45 °C in absence of any trapping reagent, were described in earlier publications [6][10][11][12][13][14][28]. In the present study, the thermal stability of the new dispiro-1,3,4-thiadiazolines 2c and 2d was tested in THF solution at a

Highly distinguishable isomeric states of a tripodal arylazopyrazole derivative on graphite through electron/hole-induced switching at ambient conditions

• Himani Malik,
• Sudha Devi,
• Debapriya Gupta,
• Ankit Kumar Gaur,
• Sugumar Venkataramani and
• Thiruvancheril G. Gopakumar

Beilstein J. Org. Chem. 2025, 21, 1496–1507, doi:10.3762/bjoc.21.112

• experimental conditions. The choice of molecules that can be studied under ultra-high vacuum (UHV) is limited due to the requirement of their thermal stability and UHV compatible sublimation temperature. Therefore, the solution-based preparation method and solid-state measurements at ambient conditions hold

• specific state for a longer duration, closer to its intrinsic thermal stability. We have observed that photo- and thermal-triggered AB and azopyrazole derivatives remain in the Z-isomeric state for several hours on the surface [45]. These exceptional lifetimes of non-equilibrium states of FNAAP are also

Advances in nitrogen-containing helicenes: synthesis, chiroptical properties, and optoelectronic applications

• Meng Qiu,
• Jing Du,
• Nai-Te Yao,
• Xin-Yue Wang and
• Han-Yuan Gong

Beilstein J. Org. Chem. 2025, 21, 1422–1453, doi:10.3762/bjoc.21.106

• incorporating dual heptagonal rings [37]. Compound 23a exhibits dynamic chirality, aggregation-induced emission (AIE), and intense CPL (|glum| = 1.7 × 10−2), whereas compound 23f, with lateral π-extension, shows enhanced thermal stability and green emission at 517 nm (Table 7). Kuehne and co-workers reported

Selective monoformylation of naphthalene-fused propellanes for methylene-alternating copolymers

• Kenichi Kato,
• Tatsuki Hiroi,
• Seina Okada,
• Shunsuke Ohtani and
• Tomoki Ogoshi

Beilstein J. Org. Chem. 2025, 21, 1183–1191, doi:10.3762/bjoc.21.95

• conditions (Figure 2a). Insoluble solids, [3.3.3]_branch and [4.3.3]_branch, were obtained due to formation of bonding networks and washed repeatedly with CH2Cl2, H2O, and acetone. Characterization of methylene-alternating copolymers The thermal stability of the oligomers and polymers were evaluated with

• ° (Supporting Information File 1, Figure S601) and continuous curves in differential scanning calorimetry (DSC) between −70 and 300 °C (Figures S701 and S702, Supporting Information File 1). The results indicated that the polymers were amorphous while giving relatively high thermal stability toward phase

Recent advances in synthetic approaches for bioactive cinnamic acid derivatives

• Betty A. Kustiana,
• Galuh Widiyarti and
• Teni Ernawati

Beilstein J. Org. Chem. 2025, 21, 1031–1086, doi:10.3762/bjoc.21.85

Substituent effects in N-acetylated phenylazopyrazole photoswitches

• Radek Tovtik,
• Dennis Marzin,
• Pia Weigel,
• Stefano Crespi and
• Nadja A. Simeth

Beilstein J. Org. Chem. 2025, 21, 830–838, doi:10.3762/bjoc.21.66

• these, azo-photoswitches based on a 1,3,5-trimethylpyrazole ring (phenylazopyrazole; PAP) became particularly popular, showing almost quantitative back and forward photoswitching and high thermal stability [31]. Moreover, 1H-pyrazole derivatives [32] and arylazopyrazolium [33] compounds were

Effect of substitution position of aryl groups on the thermal back reactivity of aza-diarylethene photoswitches and prediction by density functional theory

• Misato Suganuma,
• Daichi Kitagawa,
• Shota Hamatani and
• Seiya Kobatake

Beilstein J. Org. Chem. 2025, 21, 242–252, doi:10.3762/bjoc.21.16

• analysis of the thermal back reaction revealed activation parameters, highlighting how the substitution position of the aryl group affects the thermal stability. Additionally, density functional theory calculations identified M06 and MPW1PW91 as the most accurate functionals for predicting the thermal back

• ][26][27], photomechanical materials [28][29][30][31][32], and so on. As seen in these representative application examples, the thermal stability of the colorless and colored isomers is one of the essential properties of molecular photoswitches. For example, the photochemically reversible-type (P-type

• replacing the rotor pyridyl group of a hydrazone switch with a phenyl group afforded long-lived negative photochromic compounds [49]. In addition, Hecht and co-workers reported that the thermal stability of indigos can be tuned by N-functionalization [50][51]. They revealed that the introduction of electron

Synthesis, characterization, and photophysical properties of novel 9‑phenyl-9-phosphafluorene oxide derivatives

• Shuxian Qiu,
• Duan Dong,
• Jiahui Li,
• Huiting Wen,
• Jinpeng Li,
• Yu Yang,
• Shengxian Zhai and
• Xingyuan Gao

Beilstein J. Org. Chem. 2024, 20, 3299–3305, doi:10.3762/bjoc.20.274

• phosphine oxide (PO) groups have recently received considerable attention for their high thermal stability and unique optoelectronic features, and thus being widely applied in organic light-emitting diodes (OLEDs) [1][2]. To date, tremendous efforts have been devoted to the development of a variety of high

Reactivity of hypervalent iodine(III) reagents bearing a benzylamine with sulfenate salts

• Beatriz Dedeiras,
• Catarina S. Caldeira,
• José C. Cunha,
• Clara S. B. Gomes and
• M. Manuel B. Marques

Beilstein J. Org. Chem. 2024, 20, 3281–3289, doi:10.3762/bjoc.20.272

• as strong oxidizing agents [1], during the last decades HIRs have been investigated as group-transfer reagents, useful in several bond-forming reactions, such as in C–C, C–N, and C–O [2][3][4][5]. The benziodoxol(on)e family, cyclic iodine(III) reagents, stands out for their thermal stability and

Efficient synthesis of fluorinated triphenylenes with enhanced arene–perfluoroarene interactions in columnar mesophases

• Yang Chen,
• Jiao He,
• Hang Lin,
• Hai-Feng Wang,
• Ping Hu,
• Bi-Qin Wang,
• Ke-Qing Zhao and
• Bertrand Donnio

Beilstein J. Org. Chem. 2024, 20, 3263–3273, doi:10.3762/bjoc.20.270

• presence of the lateral aliphatic chains, the cores rotate in order to maximize aliphatic–aromatic segregation whilst preserving fluoro–arene interactions. Liquid crystal properties Prior to investigating the mesomorphism of Fn and Gnm compounds, their thermal stability was first examined by thermal

• –332 °C for Fn and above 340 °C for Gnm, probing their excellent thermal stability. All Fn and Gnm compounds display mesophases at room temperature. Their optical textures and phase-transition behaviors were observed via hot stage polarizing optical microscopy (POM). POM images were systematically

Structure and thermal stability of phosphorus-iodonium ylids

• Andrew Greener,
• Stephen P. Argent,
• Coby J. Clarke and
• Miriam L. O’Duill

Beilstein J. Org. Chem. 2024, 20, 2931–2939, doi:10.3762/bjoc.20.245

• functionalities they can transfer. In this study, a fundamental understanding of the thermal stability of phosphorus-iodonium ylids is obtained through X-ray diffraction, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Insights into the structural factors affecting thermal stability

• and potential decomposition pathways will enable the future design and development of new reagents. Keywords: hypervalent iodine; reagent development; structural analysis; thermal stability; thermogravimetric analysis; Introduction Hypervalent iodine(III) reagents have experienced a renaissance in

• vital to gain a fundamental understanding of the structural factors affecting their stability and reactivity. Previous reports have suggested a link between structural factors and thermal stability of hypervalent iodine compounds [10][11][12][13][14][15][16]. Iodine(III) compounds are generally trigonal

Deciphering the mechanism of γ-cyclodextrin’s hydrophobic cavity hydration: an integrated experimental and theoretical study

• Stiliyana Pereva,
• Stefan Dobrev,
• Tsveta Sarafska,
• Valya Nikolova,
• Silvia Angelova,
• Tony Spassov and
• Todor Dudev

Beilstein J. Org. Chem. 2024, 20, 2635–2643, doi:10.3762/bjoc.20.221

• the present study to measure the quantity and thermal stability of the water molecules inside the γ-CD we employed differential scanning calorimetry (DSC – Figure 4A) and thermogravimetry (TG – Figure 4B) in the temperature range between 300–440 K. The DSC curve reveals a wide endothermic effect with

• upon heating. Conclusion Using experimental and computational methods as well as available literature data, the present study reliably estimates the number of water molecules present in γ-CD, their preferable binding position, and thermal stability. Comparison with the other cyclodextrins revealed that

Tandem diazotization/cyclization approach for the synthesis of a fused 1,2,3-triazinone-furazan/furoxan heterocyclic system

• Yuri A. Sidunets,
• Valeriya G. Melekhina and
• Leonid L. Fershtat

Beilstein J. Org. Chem. 2024, 20, 2342–2348, doi:10.3762/bjoc.20.200

• recorded for compound 1f – 36.9%. Therefore, the synthesized triazinones 1 exhibit a wide range of NO-releasing properties and could be considered as potential drug candidates. Additionally, thermal stability of the obtained triazinones 1 and 7 was evaluated by differential scanning calorimetry. The

Factors influencing the performance of organocatalysts immobilised on solid supports: A review

• Zsuzsanna Fehér,
• Dóra Richter,
• Gyula Dargó and
• József Kupai

Beilstein J. Org. Chem. 2024, 20, 2129–2142, doi:10.3762/bjoc.20.183

• immobilization strategies, including covalent bonding and encapsulation, cater to different polymer types. Soluble polymers enhance diffusion, while insoluble ones ensure stability and high loading capacities [42]. Silica is also widely applied due to its ease of functionalisation and thermal stability [43]. The