Photocatalyic Appel reaction enabled by copper-based complexes in continuous flow

• Clémentine Minozzi,
• Jean-Christophe Grenier-Petel,
• Shawn Parisien-Collette and
• Shawn K. Collins

Beilstein J. Org. Chem. 2018, 14, 2730–2736, doi:10.3762/bjoc.14.251

• ]. Specifically, our group has demonstrated that heteroleptic Cu(I) complexes [19][20][21] have significant potential as photocatalysts that can promote a variety of mechanistically distinct photochemical transformations including single electron transfer (SET), energy transfer (ET), and proton-coupled electron

Cobalt- and rhodium-catalyzed carboxylation using carbon dioxide as the C1 source

• Tetsuaki Fujihara and
• Yasushi Tsuji

Beilstein J. Org. Chem. 2018, 14, 2435–2460, doi:10.3762/bjoc.14.221

• importance, since the highly reactive intermediate can be generated by photochemical reaction such as electron transfer and energy transfer [43][44][45]. Among them, light-energy-driven CO2 fixation reactions via C–C bond formation are promising in terms of mimicking photosynthesis. In 2015, Murakami et al

Rational design of boron-dipyrromethene (BODIPY) reporter dyes for cucurbit[7]uril

• Mohammad A. Alnajjar,
• Jürgen Bartelmeß,
• Robert Hein,
• Pichandi Ashokkumar,
• Mohamed Nilam,
• Werner M. Nau,
• Knut Rurack and
• Andreas Hennig

Beilstein J. Org. Chem. 2018, 14, 1961–1971, doi:10.3762/bjoc.14.171

• the macrocycle would be desirable. One possibility is the utilization of monofunctionalized CBs with outer cavity-attached fluorescent dyes [22][24]. This principally allows for the modular construction of various Förster resonance energy transfer (FRET) pairs as demonstrated with a Cy3-attached CB7

Recent advances in phosphorescent platinum complexes for organic light-emitting diodes

• Cristina Cebrián and
• Matteo Mauro

Beilstein J. Org. Chem. 2018, 14, 1459–1481, doi:10.3762/bjoc.14.124

• electrophosphorescent devices, the triplet nature of excited states localized on the active TMCs allows harvesting of both singlet and triplet electro-generated excitons through either direct trapping or energy transfer processes. As a consequence, the theoretical internal quantum efficiency rises from 25%, which

• and an electroluminescence intensity of about 10 mW cm−2 at 9 V. Due to the triplet character of typical platinum(II) complex emission, these metal-based dopant phosphors are typically dispersed in high triplet energy hosts to suppress energy transfer processes onto the host matrix that detrimentally

• that of other complexes bearing the bzimb tridentate ligand, with no influence of the connecting mode. Moreover, successful energy transfer was achieved upon doping thin films of TCTA:SPPO13 with the tridentate platinum complex, and high PLQY in the range 0.62–0.75 were achieved. These promising

Two novel blue phosphorescent host materials containing phenothiazine-5,5-dioxide structure derivatives

• Feng-Ming Xie,
• Qingdong Ou,
• Qiang Zhang,
• Jiang-Kun Zhang,
• Guo-Liang Dai,
• Xin Zhao and
• Huai-Xin Wei

Beilstein J. Org. Chem. 2018, 14, 869–874, doi:10.3762/bjoc.14.73

• -performance for blue PhOLEDs [9][10][11][12]. Generally, ideal host materials are required to fulfill several requirements [13][14]: i) the triplet energy level (ET) should be higher for efficient energy transfer to the guest; ii) suitable energy levels appropriately aligned with those of the neighboring

D–A–D-type orange-light emitting thermally activated delayed fluorescence (TADF) materials based on a fluorenone unit: simulation, photoluminescence and electroluminescence studies

• Lin Gan,
• Xianglong Li,
• Xinyi Cai,
• Kunkun Liu,
• Wei Li and
• Shi-Jian Su

Beilstein J. Org. Chem. 2018, 14, 672–681, doi:10.3762/bjoc.14.55

• -1,1’-biphenyl (CBP) were vacuum co-deposited at a concentration of 8 wt % for photoluminescence quantum yield (PLQY) and time-resolved transient photoluminescence decay measurements. The concentration of the doped films was optimized to ensure complete energy transfer between the host and the guest

• . PLQY measurements of 1:CBP and 2:CBP are 7% and 26%, respectively. The PLQY measurements of the doped films with lower concentration show varying degrees of deviation due to the incomplete energy transfer and the obvious luminescence from CBP (PLQY of 1 and 2 doped in CBP with 1 wt % are 2% and 10

• directly because of the energy level difference between CBP and the emitter, which makes it possible for the OLEDs with such a low emitter concentration to achieve complete energy transfer. The performance of the fabricated devices is summarized in Table 5 while the J–V–L (current density–voltage–luminance

Fluorogenic PNA probes

• Tirayut Vilaivan

Beilstein J. Org. Chem. 2018, 14, 253–281, doi:10.3762/bjoc.14.17

• probes with nanomaterials as an external quencher. In addition, the uncharged backbone of PNA offers other unique designs, including the combination of PNA probes with cationic conjugated polymers that simultaneously act as a light harvesting antenna and fluorescent resonance energy transfer (FRET

Synthesis and spectroscopic properties of β-meso directly linked porphyrin–corrole hybrid compounds

• Baris Temelli and
• Hilal Kalkan

Beilstein J. Org. Chem. 2018, 14, 187–193, doi:10.3762/bjoc.14.13

• intramolecular energy transfer between macrocycles [38]. As a part of our ongoing research on porphyrin–corrole conjugates, herein we describe a convenient synthesis of a series of novel directly linked porphyrin–corrole hybrid compounds. For this purpose, acid-catalyzed reactions of dipyrromethanes and

Fluorescent nucleobase analogues for base–base FRET in nucleic acids: synthesis, photophysics and applications

• Mattias Bood,
• Sangamesh Sarangamath,
• Moa S. Wranne,
• Morten Grøtli and
• L. Marcus Wilhelmsson

Beilstein J. Org. Chem. 2018, 14, 114–129, doi:10.3762/bjoc.14.7

• , SE-412 96 Gothenburg, Sweden 10.3762/bjoc.14.7 Abstract Förster resonance energy transfer (FRET) between a donor nucleobase analogue and an acceptor nucleobase analogue, base–base FRET, works as a spectroscopic ruler and protractor. With their firm stacking and ability to replace the natural nucleic

• that complements NMR and X-ray, normally at lower resolution, is Förster resonance energy transfer (FRET) [3][4]. FRET and especially single-molecule FRET (as an effect of a low number of biomolecules under study) has the advantage of enabling structure and dynamics investigations in living cells [3][5

• ][6]. FRET is a process that depends on the radiationless energy transfer between a donor and an acceptor molecule [7]. The reason that it can be used as a structure and dynamics technique is that it depends heavily on the distance and relative orientation between the donor and acceptor. Typical

Polarization spectroscopy methods in the determination of interactions of small molecules with nucleic acids – tutorial

• Tamara Šmidlehner,
• Ivo Piantanida and
• Gennaro Pescitelli

Beilstein J. Org. Chem. 2018, 14, 84–105, doi:10.3762/bjoc.14.5

Photocatalytic formation of carbon–sulfur bonds

• Alexander Wimmer and
• Burkhard König

Beilstein J. Org. Chem. 2018, 14, 54–83, doi:10.3762/bjoc.14.4

• 1O2 is generated by photoexcited Rose Bengal via energy transfer and abstracts a hydrogen atom from the aryl thiol. Radical addition on the indole derivative, oxidation and rearomatization via deprotonation yields the corresponding sulfenylated indole derivative. Very recently, Wei, Wang and co

• is accomplished by in situ generated singlet oxygen, which is generated by energy-transfer of the excited state of Eosin Y and only possible under aerobic conditions. The authors also found that zinc acetate is beneficial for the selective oxidation. A series of electron-rich and electron-poor

• , trifluoromethyl groups and halides, but iodides led to polymer formation. Li and Wang developed a method for the α-C(sp3)–H thiolation of ethers, using Acridine Red as photosensitizer and tert-butyl hydroperoxide (TBHP) as oxidant (Scheme 38) [73]. They reported that photoexcited Acridine Red performs an energy

Synthesis and application of trifluoroethoxy-substituted phthalocyanines and subphthalocyanines

• Satoru Mori and
• Norio Shibata

Beilstein J. Org. Chem. 2017, 13, 2273–2296, doi:10.3762/bjoc.13.224

• compared with mononuclear phthalocyanines by chemically modifying each unit unsymmetrically caused by an electronic interaction between each unit [68]. In addition, since it is possible to separate charges in dimer-type phthalocyanines, they are expected to be applied to new electron or energy transfer

• for the application in functional dyes with higher performance and in new industrial fields. An interesting example involves investigations on energy transfer between the phthalocyanine and the fullerene [101]. Normally, phthalocyanine plays the role as a donor type molecule in the field of organic

• semiconductors [102]. For example, a hybrid compound consisting of phthalocyanine and fullerene 20a causes the transfer of energy from the phthalocyanine unit to the fullerene unit when irradiated by light (Figure 6) [103][104]. However, such energy transfer does not occur in the hybrid of TFEO-ZnPc and

One-pot multistep mechanochemical synthesis of fluorinated pyrazolones

• Joseph L. Howard,
• William Nicholson,
• Yerbol Sagatov and
• Duncan L. Browne

Beilstein J. Org. Chem. 2017, 13, 1950–1956, doi:10.3762/bjoc.13.189

• addition of a grinding auxiliary could play several roles. We propose that the key benefits are related to improved mixing, and aiding in energy transfer, specifically in mechanochemical reactions where the reaction mixture could be described as a gum, paste or liquid. Notably, the comparable reaction

• difference between the two steps is the physical state of the reactants. For the first step (Table 1), both reagents are liquids, and a grinding auxiliary was required to aid mixing and energy transfer. However, for the second step (Table 2), the reagents are solids, and the presence of a grinding agent

Influence of the milling parameters on the nucleophilic substitution reaction of activated β-cyclodextrins

• László Jicsinszky,
• Kata Tuza,
• Giancarlo Cravotto,
• Andrea Porcheddu,
• Francesco Delogu and
• Evelina Colacino

Beilstein J. Org. Chem. 2017, 13, 1893–1899, doi:10.3762/bjoc.13.184

• tentatively related to the effectiveness of energy transfer, which can be expected to increase as the volume occupied by balls inside the reactor increases, thus allowing milling conditions to approach frictional regimes. In the attempt of clarifying the role of the volume fraction occupied by balls inside

• general less effective in terms of energy transfer as compared to steel. This was confirmed in the case of TU (Figure 3a and Supporting Information File 1, Table S1 entries 21 vs. 23), while milling times did not considerably change as expected [17] in the case of NaN3 (Figure 3a and Supporting

• the hydrolysis of the starting material. Moreover, mechanochemical activation allowed solve one of the major problems for cyclodextrin derivatization in solution. This is usually related to the very different solubilities of the reagents, thus requiring energy transfer by heating to induce reactions

Glyco-gold nanoparticles: synthesis and applications

• Federica Compostella,
• Olimpia Pitirollo,
• Alessandro Silvestri and
• Laura Polito

Beilstein J. Org. Chem. 2017, 13, 1008–1021, doi:10.3762/bjoc.13.100

• -modified β-galactose derivative was used to coat 10 nm AuNPs and mixed with amino-terminated quantum dots (CdTe, QD). As a consequence of the strong hydrogen bonds among QD amines and hydroxy groups of galactose, a complex of QD-AuNPs occurred as confirmed by using fluorescence resonance energy transfer

Energy down converting organic fluorophore functionalized mesoporous silica hybrids for monolith-coated light emitting diodes

• Markus Börgardts and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2017, 13, 768–778, doi:10.3762/bjoc.13.76

• (Figure 1a). Neglecting energy transfer between the luminophores superposition of the emission spectra of the three dyes covers the whole range of the visible region (400–800 nm) (Figure 1b). The three dyes were additionally analyzed with respect to their CIE chromaticity coordinates, i.e., their

• causes a drop of quantum yields, presumably due to self-quenching effects. Based on the assumption that energy transfer typically occurs at distances of less than 10 nm between two dye molecules, self-quenching should be observed if more than one molecule is found in an area of 10 × 10 nm [29]. If dye

• molecules to the silica matrix, intermolecular energy transfer causing losses in quantum yield can be expected at higher dye loadings. Likewise, for the perylene and benzofurazane-functionalized hybrid materials 9@MCM-3 and 10@MCM-6 similar dye loadings in the lower μmol·g−1 range were ascertained for

Novel β-cyclodextrin–eosin conjugates

• Gábor Benkovics,
• Damien Afonso,
• András Darcsi,
• Szabolcs Béni,
• Sabrina Conoci,
• Éva Fenyvesi,
• Lajos Szente,
• Milo Malanga and
• Salvatore Sortino

Beilstein J. Org. Chem. 2017, 13, 543–551, doi:10.3762/bjoc.13.52

• tentatively be attributed to populations of fluorophores probably interacting in a different way with the CD cavity. As outlined in the introduction, singlet oxygen, 1O2, is the key species involved in PDT and it is generated by energy transfer from the excited triplet state of a PS and the nearby molecular

A postsynthetically 2’-“clickable” uridine with arabino configuration and its application for fluorescent labeling and imaging of DNA

• Heidi-Kristin Walter,
• Bettina Olshausen,
• Ute Schepers and
• Hans-Achim Wagenknecht

Beilstein J. Org. Chem. 2017, 13, 127–137, doi:10.3762/bjoc.13.16

• by blue and green emitting cyanine-styryl dyes were improved due to the arabino-configured anchor. These oligonucleotides were used as energy transfer donors in hybrids with oligonucleotides modified with acceptor dyes that emit in the yellow-red range. These combinations give energy transfer pairs

• DNA polymerases in primer extension experiments and PCR [4][16]. To develop fluorescently labelled oligonucleotides that undergo energy transfer reactions [17] we recently applied 2’-propargyl-modified uridine 1 as DNA building block (Scheme 1) [15][18][19]. A simple look on the three-dimensional

• developed and synthesized the 2’-propargyl-modified arabino-configured uridine analog 2, incorporated it into DNA by automated phosphoramidite chemistry, “clicked” it to a variety of our recently established, photostable cyanine-styryl dyes and probed the fluorescence and energy transfer properties by

Inhibition of peptide aggregation by means of enzymatic phosphorylation

• Kristin Folmert,
• Malgorzata Broncel,
• Hans v. Berlepsch,
• Christopher H. Ullrich,
• Mary-Ann Siegert and
• Beate Koksch

Beilstein J. Org. Chem. 2016, 12, 2462–2470, doi:10.3762/bjoc.12.240

• influence the conformational populations of proteins. In nature, this information is used for signal transduction or energy transfer, but has also been shown to play an important role in many diseases like tauopathies or diabetes. With the goal of determining the effect of phosphorylation on amyloid fibril

Biradical vs singlet oxygen photogeneration in suprofen–cholesterol systems

• Fabrizio Palumbo,
• Francisco Bosca,
• Isabel M. Morera,
• Inmaculada Andreu and
• Miguel A. Miranda

Beilstein J. Org. Chem. 2016, 12, 1196–1202, doi:10.3762/bjoc.12.115

• light. The latter involves energy transfer from the photosensitizer triplet excited state to ground state molecular oxygen [5][6]. Ketoprofen (KP) is a nonsteroidal anti-inflammatory drug that contains the benzophenone (BZP, Figure 1) chromophore and displays a n,π triplet excited state [7][8][9

Synthesis of a deuterated probe for the confocal Raman microscopy imaging of squalenoyl nanomedicines

• Eric Buchy,
• Branko Vukosavljevic,
• Maike Windbergs,
• Dunja Sobot,
• Camille Dejean,
• Simona Mura,
• Patrick Couvreur and
• Didier Desmaële

Beilstein J. Org. Chem. 2016, 12, 1127–1135, doi:10.3762/bjoc.12.109

• fluorochrome in LDC nanoparticles can be used as far as the colloidal stability of the nanocarrier is preserved, but cannot address the intracellular tracking of the loaded drug after carrier disassembling. Thus, specific tools such as fluorescence resonance energy transfer (FRET) and fluorescence quenching

Muraymycin nucleoside-peptide antibiotics: uridine-derived natural products as lead structures for the development of novel antibacterial agents

• Daniel Wiegmann,
• Stefan Koppermann,
• Marius Wirth,
• Giuliana Niro,
• Kristin Leyerer and
• Christian Ducho

Beilstein J. Org. Chem. 2016, 12, 769–795, doi:10.3762/bjoc.12.77

• are three different assays available that provide such inhibition data: i) a fluorescence-based and ii) a radioactivity-based assay as well as iii) a relatively new Förster resonance energy transfer (FRET)-based method. The fluorescence-based assay was developed by Bugg et al. [79][80] and uses a

Enabling technologies and green processes in cyclodextrin chemistry

• Giancarlo Cravotto,
• Marina Caporaso,
• Laszlo Jicsinszky and
• Katia Martina

Beilstein J. Org. Chem. 2016, 12, 278–294, doi:10.3762/bjoc.12.30

• derivatives by dissolving C60 in the amorphous powder obtained from the ball milled reactants and β-CD [90]. Another example that uses the energy transfer of ball milling is the preparation of MnBi/Fe-Co core/shell structured composites. However, no pure chemical reaction is used to prepare rare-earth free

Synthesis and spectroscopic properties of β-triazoloporphyrin–xanthone dyads

• Dileep Kumar Singh and
• Mahendra Nath

Beilstein J. Org. Chem. 2015, 11, 1434–1440, doi:10.3762/bjoc.11.155

• porphyrins with diverse functionalities such as quinolone [19], ferrocene [20], carbohydrate [21] and fullerene [22] through a copper(I)-catalyzed Huisgen–Sharpless–Meldal 1,3-dipolar cycloaddition reaction [23][24]. Some of these triazolo-bridged porphyrin dyads have shown an efficient intramolecular energy

• transfer between the porphyrin part and the attached subunit. Moreover, the 1,4-disubstituted triazoles are found to be very useful for various applications including modification of cell surfaces [25], synthesis of new glycoproteins [26], specific labeling of virus particles [27] and synthesis of

Selected synthetic strategies to cyclophanes

• Sambasivarao Kotha,
• Mukesh E. Shirbhate and
• Gopalkrushna T. Waghule

Beilstein J. Org. Chem. 2015, 11, 1274–1331, doi:10.3762/bjoc.11.142