Materials nanoarchitectonics at two-dimensional liquid interfaces

• Katsuhiko Ariga,
• Michio Matsumoto,
• Taizo Mori and
• Lok Kumar Shrestha

Beilstein J. Nanotechnol. 2019, 10, 1559–1587, doi:10.3762/bjnano.10.153

• -dimensional CuO petal assemblies (by Abe and co-workers [133]), perovskite nanosheets and their layer-by-layer assemblies as high-k dielectric/ferroelectric materials (by Osada and Sasaki [134]), the manipulation of transition-metal dichalcogenides nanosheets for the usage in energy storage/conversion

Synthesis of MnO₂–CuO–Fe₂O₃/CNTs catalysts: low-temperature SCR activity and formation mechanism

• Yanbing Zhang,
• Lihua Liu,
• Yingzan Chen,
• Xianglong Cheng,
• Chengjian Song,
• Mingjie Ding and
• Haipeng Zhao

Beilstein J. Nanotechnol. 2019, 10, 848–855, doi:10.3762/bjnano.10.85

• Coal Salt Resources, Pingdingshan 467000, People′s Republic of China 10.3762/bjnano.10.85 Abstract MnO2–CuO–Fe2O3/CNTs catalysts, as a low-dimensional material, were fabricated by a mild redox strategy and used in denitration reactions. A formation mechanism of the catalysts was proposed. NO

• conversions of 4% MnO2–CuO–Fe2O3/CNTs catalyst of 43.1–87.9% at 80–180 °C were achieved, which was ascribed to the generation of amorphous MnO2, CuO and Fe2O3, and a high surface-oxygen (Os) content. Keywords: amorphous materials; carbon nanotubes; low-dimensional materials; low-temperature catalysis; SCR

• uneconomic and unsafe. Our previous studies, including MnO2–Fe2O3–CeO2–Ce2O3/CNTs [16] and Ce2O3–CeO2–CuO–MnO2/CNTs [17] catalysts, have reported a simple and mild redox method for the preparation of ternary and quaternary catalysts, and the resultant catalysts show outstanding denitration activity at 80–180

An efficient electrode material for high performance solid-state hybrid supercapacitors based on a Cu/CuO/porous carbon nanofiber/TiO₂ hybrid composite

• Mamta Sham Lal,
• Thirugnanam Lavanya and
• Sundara Ramaprabhu

Beilstein J. Nanotechnol. 2019, 10, 781–793, doi:10.3762/bjnano.10.78

• Mamta Sham Lal Thirugnanam Lavanya Sundara Ramaprabhu Alternative Energy and Nanotechnology Laboratory (AENL), Nano Functional Materials Technology Centre (NFMTC), Department of Physics, Indian Institute of Technology Madras, Chennai-600036, India 10.3762/bjnano.10.78 Abstract A Cu/CuO/porous

• carbon nanofiber/TiO2 (Cu/CuO/PCNF/TiO2) composite uniformly covered with TiO2 nanoparticles was synthesized by electrospinning and a simple hydrothermal technique. The synthesized composite exhibits a unique morphology and excellent supercapacitive performance, including both electric double layer and

• pseudo-capacitance behavior. Electrochemical measurements were performed by cyclic voltammetry, galvanostatic charge–discharge and electrochemical impedance spectroscopy. The highest specific capacitance value of 530 F g−1 at a current density of 1.5 A g−1 was obtained for the Cu/CuO/PCNF/TiO2 composite

Nanocomposite–parylene C thin films with high dielectric constant and low losses for future organic electronic devices

• Marwa Mokni,
• Gianluigi Maggioni,
• Abdelkader Kahouli,
• Sara M. Carturan,
• Walter Raniero and
• Alain Sylvestre

Beilstein J. Nanotechnol. 2019, 10, 428–441, doi:10.3762/bjnano.10.42

• recently proposed for low operating voltages of TFTs [1][2]. By using water-inducement, scandium oxide was succesfully integrated as gate dielectric in both InZnO and CuO TFTs [1]. Using a sol–gel approach, high-k ink hybrid AlOOH nanocomposites demonstrated low leakage currents suitable for low operating

Graphene-enhanced metal oxide gas sensors at room temperature: a review

• Dongjin Sun,
• Yifan Luo,
• Marc Debliquy and
• Chao Zhang

Beilstein J. Nanotechnol. 2018, 9, 2832–2844, doi:10.3762/bjnano.9.264

• achieved at all [19][20]. Metal-oxide semiconductors (MOS), including tin oxide (SnO2), titanium dioxide (TiO2), zinc oxide (ZnO), copper oxide (CuO), tungsten oxide (WO3), indium oxide (In2O3), ferric oxide (Fe2O3) and cobalt oxide (Co3O4) are important materials for gas sensors [21][22][23][24][25][26

• , ammonia adsorbed on the surface of sensor by dissolving into water, leading to the higher response. This is quite different from the usual opinion that sensitivity will decrease at high humidity levels. Zhang et al. [47] synthesized CuO nanoflowers via hydrothermal method, then CuO and rGO were deposited

• on the substrate with Ni/Cu IDEs to fabricate the CuO–rGO sensor. The CuO–rGO sensor showed a three-times higher sensitivity to CO and faster response/recovery time than the rGO sensor, while the pure CuO sensor showed no response to CO at room temperature. The p–p junctions constituted between p

Improved catalytic combustion of methane using CuO nanobelts with predominantly (001) surfaces

• Qingquan Kong,
• Yichun Yin,
• Bing Xue,
• Yonggang Jin,
• Wei Feng,
• Zhi-Gang Chen,
• Shi Su and
• Chenghua Sun

Beilstein J. Nanotechnol. 2018, 9, 2526–2532, doi:10.3762/bjnano.9.235

• Chemistry and Biotechnology, Faculty of Science, Engineering & Technology, Swinburne University of Technology, Hawthorn, VIC 3122, Australia 10.3762/bjnano.9.235 Abstract Through computational calculations, CuO(001) has been identified as an active surface for methane oxidation. Experimental validation

• with CuO nanobelts comprised of predominantly (001) surfaces has been performed and it is confirmed that the performance of such nanobelts is much higher than normal nanoparticles and nanowires. First principle calculations further clarified that two-coordinated oxygen plays a key role for methane

• this strategy, this work explores the catalysis of copper oxide (CuO), a promising catalyst for CH4 oxidation as identified in the literature [8]. Different from these reports, we focus on the performance of the minority surface (001). Results and Discussion Starting with computational calculations

Electrospun one-dimensional nanostructures: a new horizon for gas sensing materials

• Muhammad Imran,
• Nunzio Motta and
• Mahnaz Shafiei

Beilstein J. Nanotechnol. 2018, 9, 2128–2170, doi:10.3762/bjnano.9.202

• deposited directly onto a controlled and selective deposition area using a multifield electrospinning setup as shown in Figure 2. The scanning transmission electron microscopy (STEM) image confirms the uniform distribution of MoO3 NPs inside the electrospun fibers. Similarly, CuO NPs are embedded in

• of electrospun metal oxide (MOx) semiconductors have been used for gas sensing applications. These semiconductors include titanium dioxide (TiO2) [93][94][95], tungsten trioxide (WO3) [27][96][97][98][99][100][101][102][103][104][105][106][107][108][109][110], copper oxide (CuO) [111], NiO [112

• annealing and calcination [83]. A very low detection limit (9.7 ppb NOx) with an optimal response time (20 s) is achieved with nanocrystalline (5–10 nm) SnO2 NTs at room temperature [141]. Similar behaviour is exhibited by p-type NiO and CuO toward CO and NO2 [111][112]. The gas sensing behaviour also

Comparative study of antibacterial properties of polystyrene films with TiO_x and Cu nanoparticles fabricated using cluster beam technique

• Vladimir N. Popok,
• Cesarino M. Jeppesen,
• Peter Fojan,
• Anna Kuzminova,
• Jan Hanuš and
• Ondřej Kylián

Beilstein J. Nanotechnol. 2018, 9, 861–869, doi:10.3762/bjnano.9.80

• organic cells. Because of these toxic properties the films and nanostructures of such metals or metal compounds are widely used as antibacterial and antimicrobial agents. Among them are Ag, Cu, Au, CuO, ZnO, Fe3O4, Al2O3 and TiO2, to name just a few [1][2][3]. They all exhibit bactericidal properties

• antibacterial effect. Furthermore, Cu NPs under ambient conditions can easily lead to the formation of CuO, which also displays a direct toxicity for microorganisms [18]. They already disturb microorganisms when being in contact with the bacterial surface by reacting with proteins forming pores in the membrane

Facile synthesis of a ZnO–BiOI p–n nano-heterojunction with excellent visible-light photocatalytic activity

• Mengyuan Zhang,
• Jiaqian Qin,
• Pengfei Yu,
• Bing Zhang,
• Mingzhen Ma,
• Xinyu Zhang and
• Riping Liu

Beilstein J. Nanotechnol. 2018, 9, 789–800, doi:10.3762/bjnano.9.72

• degradation [3][4][5][6], nitrogen fixation [7][8], to solar fuel production [9]. The metal oxides, such as CdO [10], Al2O3 [11], and CuO [12][13], has attracted a lot of interest in photocatalytic applications. And among all of these metal oxides, it is titanium dioxide and zinc oxide (TiO2 and ZnO) that are

A review of carbon-based and non-carbon-based catalyst supports for the selective catalytic reduction of nitric oxide

• Shahreen Binti Izwan Anthonysamy,
• Syahidah Binti Afandi,
• Mehrnoush Khavarian and
• Abdul Rahman Bin Mohamed

Beilstein J. Nanotechnol. 2018, 9, 740–761, doi:10.3762/bjnano.9.68

• influenced by the function of support materials. In their study, SiO2 was synthesised using the sol–gel method. Zeng et al. [41] implemented the sol–gel technique to prepare CuO–TiO2 catalysts for the selective catalytic oxidation of NO. Based on the results, the CuO–TiO2 catalysts demonstrated higher

• catalytic activity than the Cu0.07/Ti catalyst prepared using the impregnation method. The CuO–TiO2 catalyst possessed more highly dispersed CuO species as well as many oxygen vacancy active sites, which enhanced the NO gas and made it easily attachable during the catalytic reaction. Similar to previous

• -R exhibited high tolerance towards SO2 and H2O. Bai et al. [52] studied CuO supported on CNTs. The catalyst was developed to better understand the catalytic behaviour of CNT-based catalysts especially in reducing the amount of nitric oxide in an SCR reaction. Different amounts of CuO loadings were

BN/Ag hybrid nanomaterials with petal-like surfaces as catalysts and antibacterial agents

• Konstantin L. Firestein,
• Denis V. Leybo,
• Alexander E. Steinman,
• Andrey M. Kovalskii,
• Andrei T. Matveev,
• Anton M. Manakhov,
• Irina V. Sukhorukova,
• Pavel V. Slukin,
• Nadezda K. Fursova,
• Sergey G. Ignatov,
• Dmitri V. Golberg and
• Dmitry V. Shtansky

Beilstein J. Nanotechnol. 2018, 9, 250–261, doi:10.3762/bjnano.9.27

• only improve the colloidal stability of Ag NPs but also improve their antibacterial characteristics. A wide range of materials, such as graphene oxide [30][31], carbon nanotubes [32], SiO2 [33], Fe3O4 [34], ZnO [35], CuO [36], TiO2 [37] and others, have been tested as the supports for Ag NPs. Compared

Fabrication of CeO₂–MO_x (M = Cu, Co, Ni) composite yolk–shell nanospheres with enhanced catalytic properties for CO oxidation

• Ling Liu,
• Jingjing Shi,
• Hongxia Cao,
• Ruiyu Wang and
• Ziwu Liu

Beilstein J. Nanotechnol. 2017, 8, 2425–2437, doi:10.3762/bjnano.8.241

• ]. Taking the CeO2–CuO catalyst as a typical example, the improved catalytic activity is closely related to the synergistic interaction between copper and ceria, which promotes the exchange of charges between Ce4+/Ce3+ and Cu2+/Cu+ and leads to faster oxidation and reduction than that of the corresponding

• , thus, the facilitation of synergistic interaction between two components are necessary to optimize the catalytic performances. The unique structure and texture of CeO2-based catalysts is also associated with high activity and stability in the catalytic reaction. For instance, rod-like CeO2–CuO

• catalysts with highly dispersed copper oxide clusters as active species had been reported to exhibit superior activity toward CO oxidation in contrast with commonly used CeO2/CuO composite catalysts [13]. Consequently, the construction of ceria-based composite oxides with pore features, hollow structure or

Low-temperature CO oxidation over Cu/Pt co-doped ZrO₂ nanoparticles synthesized by solution combustion

• Amit Singhania and
• Shipra Mital Gupta

Beilstein J. Nanotechnol. 2017, 8, 1546–1552, doi:10.3762/bjnano.8.156

• milling, precipitation, combustion, and reverse microemulsion [30][31][32][33]. Vahidshad et al. [34] synthesized sol–gel-derived Cu–ZrO2 nanoparticles. Similarly, Saha et al. [35] prepared CuO-doped ZrO2 nanoparticles via ball milling. Among the described methods, solution combustion is used frequently

• ), (200), (220), (311) and (222) planes, respectively (JCPDS card no. 27-0997). Peaks were found neither at 2θ = 39.8° for Pt (or 2θ = 33.9° and 27.9° for PtO and PtO2) nor at 2θ = 43.6° for Cu (or 2θ = 38.7° and 36.5° for CuO and Cu2O). This indicates that Cu2+ and Pt2+ ions have entered the ZrO2 lattice

Enhanced catalytic activity without the use of an external light source using microwave-synthesized CuO nanopetals

• Govinda Lakhotiya,
• Sonal Bajaj,
• Arpan Kumar Nayak,
• Debabrata Pradhan,
• Pradip Tekade and
• Abhimanyu Rana

Beilstein J. Nanotechnol. 2017, 8, 1167–1173, doi:10.3762/bjnano.8.118

• , University of Twente, 7500 AE, Enschede, Netherlands 10.3762/bjnano.8.118 Abstract We report enhanced catalytic activity of CuO nanopetals synthesized by microwave-assisted wet chemical synthesis. The catalytic reaction of CuO nanopetals and H2O2 was studied with the application of external light source and

• also under dark conditions for the degradation of the hazardous dye methylene blue. The CuO nanopetals showed significant catalytic activity for the fast degradation of methylene blue and rhodamine B (RhB) under dark conditions, without the application of an external light source. This increased

• conditions is also illustrated. Keywords: CuO nanopetals; dark catalytic activity; fast degradation of dyes; microwave synthesis; Introduction Controlling air quality and water pollutants is a big challenge for environmental research [1]. Particularly, efforts have been taken to control these pollutants

Growth, structure and stability of sputter-deposited MoS₂ thin films

• Reinhard Kaindl,
• Bernhard C. Bayer,
• Roland Resel,
• Thomas Müller,
• Viera Skakalova,
• Gerlinde Habler,
• Rainer Abart,
• Alexey S. Cherevan,
• Dominik Eder,
• Maxime Blatter,
• Fabian Fischer,
• Jannik C. Meyer,
• Dmitry K. Polyushkin and
• Wolfgang Waldhauser

Beilstein J. Nanotechnol. 2017, 8, 1115–1126, doi:10.3762/bjnano.8.113

• was previously reported [29][49]. Given that the films presented in this study have been sputtered from a MoS2 target with a purity of 99.5 wt %, which contains 0.03 wt % SiO2, 0.02 wt % MoO3, 0.01 wt % copper oxide (CuO), 0.019 wt % iron (Fe) and up to 0.20 wt % not specified compounds, in a metallic

• Scituate, MA, USA) and a 6 mm thick MoS2 target with 76.2 mm (3-inch) diameter (Sindlhauser Materials GmbH, Germany). Purity of the target is 99.5 wt % MoS2, according to the materials test certificate further compounds are SiO2 (0.03), MoO3 (0.02), CuO (0.01), Fe (0.019) and not specified elements (<0.20

Treatment of fly ash from power plants using thermal plasma

• Sulaiman Al-Mayman,
• Ibrahim AlShunaifi,
• Abdullah Albeladi,
• Imed Ghiloufi and
• Saud Binjuwair

Beilstein J. Nanotechnol. 2017, 8, 1043–1048, doi:10.3762/bjnano.8.105

• contributions of K2O, TiO2, ZnO, Cr2O3, CuO, and RuO2 were detected. The concentrations of product elements measured by ICP-AES are summarized in Table 1. The product has the same major and minor constituents of the feed (Table 1) and also contains toxic elements. As indicated before, fly ash has a high level

Synthesis of graphene–transition metal oxide hybrid nanoparticles and their application in various fields

• Arpita Jana,
• Elke Scheer and
• Sebastian Polarz

Beilstein J. Nanotechnol. 2017, 8, 688–714, doi:10.3762/bjnano.8.74

• by Kumar et al. for supercapacitor applications [206]. This hybrid can also be used as an electrochemical pseudocapacitor material for potential energy storage applications [207][208]. Copper oxide (Cu2O, CuO, CuO2, Cu2O3)–graphene hybrids Cu nanowire (NW) films and indium tin oxide (ITO) films have

• –graphene hybrids, was used as a high-performance NO2 gas sensor (Figure 8). Copper oxide (CuO) is also a p-type semiconductor. CuO–graphene composites have also been used as anode material for LIBs [211][215]. Mathesh et al. prepared GO hybrid materials consisting of Cu ions complexed with GO, where Cu2

• electrical characteristics of CuO–graphene bilayer structure has been modified largely due to the electronic interaction at the hybrid interface. The O2 intake capacity of the multilayer graphene results in reversible bipolar resistive switching properties [217]. Zhou et al. prepared graphene-wrapped CuO

Study of the surface properties of ZnO nanocolumns used for thin-film solar cells

• Neda Neykova,
• Jiri Stuchlik,
• Karel Hruska,
• Ales Poruba,
• Zdenek Remes and
• Ognen Pop-Georgievski

Beilstein J. Nanotechnol. 2017, 8, 446–451, doi:10.3762/bjnano.8.48

• preferred treatment for the preparation of thin-film solar cells based on ZnO NCs. The reported ZnO nanocolumns layer with a proper spacing could be used as a 3-D scaffold not only for amorphous silicon solar cells, but also for other absorbers with a short lifetime such as CuO, CuO2, FeS2, quantum dots or

Role of oxygen in wetting of copper nanoparticles on silicon surfaces at elevated temperature

• Tapas Ghosh and
• Biswarup Satpati

Beilstein J. Nanotechnol. 2017, 8, 425–433, doi:10.3762/bjnano.8.45

• spectroscopy (EDX) and X-ray diffraction (XRD) analysis shows that the thermal oxidation of the copper nanoparticles and formation of cupric oxide (CuO) on silicon surfaces leads to wetting rather than agglomeration. In contrast, agglomeration has been observed when copper nanoparticles were annealed in a

• nitrogen environment. The lattice transformation from cubic Cu to monoclinic CuO, and hence the change in surface energy of the particles, assists the wetting process. The occurrence of wetting during the oxidation step implies a strong interaction between the oxidized film and the silicon surface

• . Keywords: copper; cupric oxide; electron diffraction; galvanic displacement reaction; oxidation; surface wetting; transmission electron microscopy; Introduction The transition metal oxide cupric oxide (CuO) is a stable oxide of copper, and due to its diverse applications, immense research on CuO

Phosphorus-doped silicon nanorod anodes for high power lithium-ion batteries

• Chao Yan,
• Qianru Liu,
• Jianzhi Gao,
• Zhibo Yang and
• Deyan He

Beilstein J. Nanotechnol. 2017, 8, 222–228, doi:10.3762/bjnano.8.24

• were fabricated on CuO nanorods for application in high power lithium-ion batteries. Since the conductivity of lithiated CuO is significantly better than that of CuO, after the first discharge, the voltage cut-off window was then set to the range covering only the discharge–charge range of Si. Thus

• , the CuO core was in situ lithiated and acts merely as the electronic conductor in the following cycles. The Si anode presented herein exhibited a capacity of 990 mAh/g at the rate of 9 A/g after 100 cycles. The anode also presented a stable rate performance even at a current density as high as 20 A/g

• performance for Si-based anodes. In this work, we prepared heavy-phosphorus-doped silicon anodes on CuO nanorods for high power LIBs. In our experiments, once the voltage cut-off window was set in the range that only covers the discharge–charge range of Si, the conductivity of CuO nanorods was highly

Development of highly faceted reduced graphene oxide-coated copper oxide and copper nanoparticles on a copper foil surface

• Rebeca Ortega-Amaya,
• Yasuhiro Matsumoto,
• Andrés M. Espinoza-Rivas,
• Manuel A. Pérez-Guzmán and
• Mauricio Ortega-López

Beilstein J. Nanotechnol. 2016, 7, 1010–1017, doi:10.3762/bjnano.7.93

• depending on the amount of CO evolved during such a thermal process. The carbothermal reduction of copper oxide has been studied by several authors, and the involved chemistry and pathway toward the copper oxide reduction appear to be very complex processes [29][30][31]. Experiments on the reduction of CuO

• by CO carried out by X. Wang et al. [29] revealed that CuO decomposes either directly to metallic copper when high amounts of CO were supplied or via formation of Cu2O when CO supply was limited. Because the detachment of the oxidative species from the GO plane is a temperature-activated process, we

Selective photocatalytic reduction of CO₂ to methanol in CuO-loaded NaTaO₃ nanocubes in isopropanol

• Tianyu Xiang,
• Feng Xin,
• Jingshuai Chen,
• Yuwen Wang,
• Xiaohong Yin and
• Xiao Shao

Beilstein J. Nanotechnol. 2016, 7, 776–783, doi:10.3762/bjnano.7.69

• Engineering, Tianjin University of Technology, Tianjin 300384, China 10.3762/bjnano.7.69 Abstract A series of NaTaO3 photocatalysts were prepared with Ta2O5 and NaOH via a hydrothermal method. CuO was loaded onto the surface of NaTaO3 as a cocatalyst by successive impregnation and calcination. The obtained

• product of isopropanol, respectively. NaTaO3 nanocubes loaded with 2 wt % CuO and synthesized in 2 mol/L NaOH solution showed the best activity. The methanol and acetone yields were 137.48 μmol/(g·h) and 335.93 μmol/(g·h), respectively, after 6 h of irradiation. Such high activity could be attributed to

• the good crystallinity, morphology and proper amount of CuO loading, which functioned as reductive sites for selective formation of methanol. The reaction mechanism was also proposed and explained by band theory. Keywords: CO2 reduction; CuO loading; isopropanol; NaTaO3 nanocubes; photocatalysis

Tight junction between endothelial cells: the interaction between nanoparticles and blood vessels

• Yue Zhang and
• Wan-Xi Yang

Beilstein J. Nanotechnol. 2016, 7, 675–684, doi:10.3762/bjnano.7.60

• induce brain dysfunction and pathology [25] and in some cases have an impact on gene expression in neural cells [26]. CuO NPs reduce cell viability and also cause oxidative stress in human bronchial epithelial cells [27]. Interaction between NPs and blood circulatory system The circulatory system or

Sonochemical co-deposition of antibacterial nanoparticles and dyes on textiles

• Ilana Perelshtein,
• Anat Lipovsky,
• Nina Perkas,
• Tzanko Tzanov and
• Aharon Gedanken

Beilstein J. Nanotechnol. 2016, 7, 1–8, doi:10.3762/bjnano.7.1

• the case of nano-CuO coated on cotton, which after 65 intensive washing cycles at 75 °C in a hospital washing machine, still maintained their bactericidal effect, yielding a reduction of about log 5 after this long process. Moreover, SEM pictures demonstrated that the CuO NPs remained on the surface

• antibacterial CuO or ZnO nanoparticles (NPs) from an aqueous solution. The solution contains both the dye and the corresponding M(CH3COO)2 (M = Zn or Cu) precursor, which undergoes hydrolysis under alkaline conditions (ammonia) to form ZnO or CuO. The cotton was colored with the dye and showed good

• saline. The plates were allowed to grow overnight at 37 °C and the viable bacteria were counted thereafter. Results and Discussions Optimization of the co-deposition The deposition of the two compounds, the antibacterial ZnO or CuO, and the RO16 or RB5 dyes were carried out by dissolving the

Large area scanning probe microscope in ultra-high vacuum demonstrated for electrostatic force measurements on high-voltage devices

• Urs Gysin,
• Thilo Glatzel,
• Thomas Schmölzer,
• Adolf Schöner,
• Sergey Reshanov,
• Holger Bartolf and
• Ernst Meyer

Beilstein J. Nanotechnol. 2015, 6, 2485–2497, doi:10.3762/bjnano.6.258

• . The grain seems to be covered by a residual layer partly smearing out the CPD contrast. The PtIr-coated tip is most probably contaminated by a metal oxide cluster (CuO or CrO) due to slight tip–sample contacts before the measurements, such that the work function is around Φtip = 5 eV [40]. Also in