Design of a nanostructured mucoadhesive system containing curcumin for buccal application: from physicochemical to biological aspects

• Sabrina Barbosa de Souza Ferreira,
• Gustavo Braga,
• Évelin Lemos Oliveira,
• Jéssica Bassi da Silva,
• Hélen Cássia Rosseto,
• Lidiane Vizioli de Castro Hoshino,
• Mauro Luciano Baesso,
• Wilker Caetano,
• Craig Murdoch,
• Helen Elizabeth Colley and
• Marcos Luciano Bruschi

Beilstein J. Nanotechnol. 2019, 10, 2304–2328, doi:10.3762/bjnano.10.222

• fragments with heterogeneous, but well defined, structures. This was probably due to the presence and movement of water that was removed due to the freeze-drying process. Besides, the portion of the microstructures or microchannels exhibiting exposed breakage (Figure 4B) were probably due to the interaction

A novel all-fiber-based LiFePO₄/Li₄Ti₅O₁₂ battery with self-standing nanofiber membrane electrodes

• Li-li Chen,
• Hua Yang,
• Mao-xiang Jing,
• Chong Han,
• Fei Chen,
• Xin-yu Hu,
• Wei-yong Yuan,
• Shan-shan Yao and
• Xiang-qian Shen

Beilstein J. Nanotechnol. 2019, 10, 2229–2237, doi:10.3762/bjnano.10.215

• /Max2500X-ray diffractometer was used to determine the crystalline structure of the composite fibers. A JSM-5600LV scanning electron microscope and a JEOL JEM2010 transmission electron microscope were used to observe the morphology and microstructures of the fibers. The electrochemical performance of the

The importance of design in nanoarchitectonics: multifractality in MACE silicon nanowires

• Stefania Carapezzi and
• Anna Cavallini

Beilstein J. Nanotechnol. 2019, 10, 2094–2102, doi:10.3762/bjnano.10.204

• depended on their aspect ratio. It occurred for aspect ratios greater than 1:10, while it was not observed for an aspect ratio of about 1:5. Actually, many more factors have impact on the self-assembly of arrays of nano- and microstructures with high aspect ratios, when a liquid is evaporated off the

Improvement of the thermoelectric properties of a MoO₃ monolayer through oxygen vacancies

• Wenwen Zheng,
• Wei Cao,
• Ziyu Wang,
• Huixiong Deng,
• Jing Shi and
• Rui Xiong

Beilstein J. Nanotechnol. 2019, 10, 2031–2038, doi:10.3762/bjnano.10.199

• Education, School of Physics and Technology, Wuhan University, Wuhan 430072, China The Institute of Technological Sciences, Wuhan University, Wuhan 430072, China State Key Laboratory of Superlattices and Microstructures, Institute of Semiconductors, Chinese Academy of Sciences, P. O. Box 912, Beijing 100083

Facile synthesis of carbon nanotube-supported NiO//Fe₂O₃ for all-solid-state supercapacitors

• Shengming Zhang,
• Xuhui Wang,
• Yan Li,
• Xuemei Mu,
• Yaxiong Zhang,
• Jingwei Du,
• Guo Liu,
• Xiaohui Hua,
• Yingzhuo Sheng,
• Erqing Xie and
• Zhenxing Zhang

Beilstein J. Nanotechnol. 2019, 10, 1923–1932, doi:10.3762/bjnano.10.188

• 12 h. CC-CNT@NiO: The NiO was coated on the CC-CNT by the same process with NiCl2 (0.1 M) aqueous solution instead of FeCl3 (0.1 M). Materials characterization The morphologies and microstructures of the as-prepared samples were characterized by using a field-emission scanning electron microscope (FE

Janus-micromotor-based on–off luminescence sensor for active TNT detection

• Ye Yuan,
• Changyong Gao,
• Daolin Wang,
• Chang Zhou,
• Baohua Zhu and
• Qiang He

Beilstein J. Nanotechnol. 2019, 10, 1324–1331, doi:10.3762/bjnano.10.131

• Ye Yuan Changyong Gao Daolin Wang Chang Zhou Baohua Zhu Qiang He Chemistry and Chemical Engineering College, Inner Mongolia University, College Road 235, Hohhot 010021, China Key Laboratory of Microsystems and Microstructures Manufacturing, Ministry of Education, Harbin Institute of Technology, Yi

Renewable energy conversion using nano- and microstructured materials

• Harry Mönig and
• Martina Schmid

Beilstein J. Nanotechnol. 2019, 10, 771–773, doi:10.3762/bjnano.10.76

• - and microstructures for energy conversion: materials and devices” provides insights into the latest developments in the related fields. Besides a focus on solar-cell concepts [1][2][3][4][5], it also addresses light harvesting by solar fuel production [6][7], and energy storage by batteries [8

• ]. Nanostructured materials can be synthesized by a huge variety of approaches, extending from self-assembled structures [9], over various lithographic techniques [10] and imprinting methods [11], to different crystallization routes [12]. The thematic issue “Nano- and microstructures for energy conversion

Improving control of carbide-derived carbon microstructure by immobilization of a transition-metal catalyst within the shell of carbide/carbon core–shell structures

• Teguh Ariyanto,
• Jan Glaesel,
• Andreas Kern,
• Gui-Rong Zhang and
• Bastian J. M. Etzold

Beilstein J. Nanotechnol. 2019, 10, 419–427, doi:10.3762/bjnano.10.41

• using halogen gases at elevated temperatures. Depending on the carbide and parameters employed during the synthesis, CDC can be varied from extremely amorphous to highly crystalline microstructures and from ultramicro- to mesoporous pore structures. Therefore, CDC is known as material with tunable

Pull-off and friction forces of micropatterned elastomers on soft substrates: the effects of pattern length scale and stiffness

• Peter van Assenbergh,
• Marike Fokker,
• Julian Langowski,
• Jan van Esch,
• Marleen Kamperman and
• Dimitra Dodou

Beilstein J. Nanotechnol. 2019, 10, 79–94, doi:10.3762/bjnano.10.8

• microstructures (G′PVA ≈ 101 kPa; EPDMS ≈ 102 kPa), the substrate is expected to be the main component to deform when stress is applied. Geometry effects, if present, are unlikely to significantly contribute to the generated pull-off forces and friction forces, because the soft substrates likely fully conform to

• microstructures of dimples with a terminal layer, deformation of the terminal layer is likely to happen, given that the elastic modulus of PDMS is in the kilopascal-range, and thus elastic, and the thickness of the terminal layer is limited (i.e., conformation to substrate roughness requires only a small volume

• of material to elastically deform, resulting in a minor elastic penalty for conformation). The result that higher pull-off forces are generated with the softer PDMS-280 microstructures compared to PDMS-580 microstructures supports a deformation effect of the terminal layer. Besides elastic stretching

Contact splitting in dry adhesion and friction: reducing the influence of roughness

• Jae-Kang Kim and
• Michael Varenberg

Beilstein J. Nanotechnol. 2019, 10, 1–8, doi:10.3762/bjnano.10.1

• been performed so far for thin-film-based adhesives. To this end, we report on the behavior of original and split, wall-shaped adhesive microstructures on different surfaces ranging across four orders of magnitude in roughness. Our results clearly demonstrate that the adhesion- and friction-driven

• decisive experimental validation of this hypothesis has been performed so far for thin-film-based adhesives. To this end, here we report the adhesive and frictional behavior of original and carefully split wall-shaped adhesive microstructures [36] on different surfaces ranging across four orders of

• magnitude in roughness. Results and Discussion Pull-off forces measured with original and split wall-shaped adhesive microstructures against different rough surfaces (Figure 1, see Experimental for details) are shown in Figure 2. The surfaces are represented using the traditional root-mean-square deviation

A new bioinspired method for pressure and flow sensing based on the underwater air-retaining surface of the backswimmer Notonecta

• Matthias Mail,
• Adrian Klein,
• Horst Bleckmann,
• Anke Schmitz,
• Torsten Scherer,
• Peter T. Rühr,
• Goran Lovric,
• Robin Fröhlingsdorf,
• Stanislav N. Gorb and
• Wilhelm Barthlott

Beilstein J. Nanotechnol. 2018, 9, 3039–3047, doi:10.3762/bjnano.9.282

• the microstructures. Furthermore, the microstructures of the setal bases were analyzed using focused ion beam techniques (FIB, Zeiss Auriga 60). In this case, fresh hemelytra were covered with a thin gold layer using a sputter coater (Sputter Coater 108auto, Cressington). Using the FIB system, a

Biomimetic surface structures in steel fabricated with femtosecond laser pulses: influence of laser rescanning on morphology and wettability

• Camilo Florian Baron,
• Alexandros Mimidis,
• Daniel Puerto,
• Evangelos Skoulas,
• Emmanuel Stratakis,
• Javier Solis and
• Jan Siegel

Beilstein J. Nanotechnol. 2018, 9, 2802–2812, doi:10.3762/bjnano.9.262

• for mimicking this structure by exploiting self-organization mechanisms. In particular, employing a combination of such isotropic microstructures shown in Figure 2B (which determine the water contact angle, as will be shown in Figure 4) with an anisotropic overstructure with dimensions of hundreds of

• dramatically different. Figure 2C shows that for a single scan, no apparent order or self-organization is obtained. Upon rescanning, ordered cone-like microstructures are formed whose size decreases with the scan number. It is questionable though if at this relatively high fluence the scenario of cone

High-throughput micro-nanostructuring by microdroplet inkjet printing

• Hendrikje R. Neumann and
• Christine Selhuber-Unkel

Beilstein J. Nanotechnol. 2018, 9, 2372–2380, doi:10.3762/bjnano.9.222

• the nanoscale, so far it has been inefficient in generating a hierarchical overlay structure at the micrometer scale. Here, we show that by combining block copolymer micelle nanolithography with inkjet printing, hierarchical patterns of gold nanoparticles in the form of microstructures can be achieved

• : biofunctional surfaces; inkjet printing; microstructures; nanolithography; nanoparticles; Introduction Many applications require well-organized micro- and nanoscale patterning of metallic nanoparticles. Examples include high-performance optics [1], multimodal waveguides [2], biosensors [3] and biomaterials [4

Directional light beams by design from electrically driven elliptical slit antennas

• Shuiyan Cao,
• Eric Le Moal,
• Quanbo Jiang,
• Aurélien Drezet,
• Serge Huant,
• Jean-Paul Hugonin,
• Gérald Dujardin and
• Elizabeth Boer-Duchemin

Beilstein J. Nanotechnol. 2018, 9, 2361–2371, doi:10.3762/bjnano.9.221

• Grenoble, France and CNRS, Institut NEEL, F-38042 Grenoble, France Laboratoire Charles Fabry, Institut d’Optique, 91127 Palaiseau, France 10.3762/bjnano.9.221 Abstract We report on the low-energy, electrical generation of light beams in specific directions from planar elliptical microstructures. The

• few degrees [32][33] may be obtained from periodic microstructures (e.g., bull’s-eye antennas [34][35]), yet again with a strong dependence on frequency. Foremost, planar antennas with cylindrical symmetry, such as bull’s-eye [36] and patch antennas [37][38], invariably emit light in a beam or cone

Block copolymers for designing nanostructured porous coatings

• Roberto Nisticò

Beilstein J. Nanotechnol. 2018, 9, 2332–2344, doi:10.3762/bjnano.9.218

• microstructures of the porous polymeric architectures. Acknowledgements Polytechnic of Torino is gratefully acknowledged for funding the project Starting Grant RTD (project number: 54_RSG17NIR01). The author would like to thank Dr. Dominique Scalarone (University of Torino, Italy) for fruitful and nice

Performance analysis of rigorous coupled-wave analysis and its integration in a coupled modeling approach for optical simulation of complete heterojunction silicon solar cells

• Ziga Lokar,
• Benjamin Lipovsek,
• Marko Topic and
• Janez Krc

Beilstein J. Nanotechnol. 2018, 9, 2315–2329, doi:10.3762/bjnano.9.216

• present to produce scattering matrices. These matrices are an input for the RT and TMM part of the simulator. By applying iterative coupling, the optical situation in the region of nanostructures, microstructures, thin and thick layers can be simulated in an effective and accurate way. Schematic

Inverse proximity effect in semiconductor Majorana nanowires

• Alexander A. Kopasov,
• Ivan M. Khaymovich and
• Alexander S. Mel'nikov

Beilstein J. Nanotechnol. 2018, 9, 1184–1193, doi:10.3762/bjnano.9.109

• Alexander A. Kopasov Ivan M. Khaymovich Alexander S. Mel'nikov Institute for Physics of Microstructures, Russian Academy of Sciences, 603950 Nizhny Novgorod, GSP-105, Russia Max Planck Institute for the Physics of Complex Systems, 01187 Dresden, Germany Lobachevsky State University of Nizhny

Effect of microtrichia on the interlocking mechanism in the Asian ladybeetle, Harmonia axyridis (Coleoptera: Coccinellidae)

• Jiyu Sun,
• Chao Liu,
• Bharat Bhushan,
• Wei Wu and
• Jin Tong

Beilstein J. Nanotechnol. 2018, 9, 812–823, doi:10.3762/bjnano.9.75

• the elytra and freely extended for flight, depending on the required action. To investigate the locking mechanism, this study used environmental scanning electron microscopy (ESEM) to examine the microstructures of the elytra, hindwings and abdomen of the Asian ladybeetle, Harmonia axyridis (Pallas

• underlying the interlocking of the hindwing, the microstructures of microtrichia on the elytra, hindwing and abdomen were observed using ESEM. Then, the different functions of microtrichia were discussed. On the hindwing, there are fewer microtrichia around the fold line and more microtrichia in places

Surface-plasmon-enhanced ultraviolet emission of Au-decorated ZnO structures for gas sensing and photocatalytic devices

• T. Anh Thu Do,
• Truong Giang Ho,
• Thu Hoai Bui,
• Quang Ngan Pham,
• Hong Thai Giang,
• Thi Thu Do,
• Duc Van Nguyen and
• Dai Lam Tran

Beilstein J. Nanotechnol. 2018, 9, 771–779, doi:10.3762/bjnano.9.70

• found that the synthesis of very diverse ZnO structures was easily controllable by different methods, for example, using hydrothermal routes. Thus, ZnO nano- or even microstructures decorated by some noble metals (Au, Ag and Pt) to form plasmonic metal/semiconductor structures are very attractive and

• faceted ZnO nano- and microstructures [3][43][44], or trapping of surface and/or defect states [5][42]. In our experiment, the plausible photocatalytic mechanism could be related to the high plasmonic effect of the Au NP/ZnO film in which high-energy photoinduced electrons (hot electrons due to SPR effect

Mechanistic insights into plasmonic photocatalysts in utilizing visible light

• Kah Hon Leong,
• Azrina Abd Aziz,
• Lan Ching Sim,
• Pichiah Saravanan,
• Min Jang and
• Detlef Bahnemann

Beilstein J. Nanotechnol. 2018, 9, 628–648, doi:10.3762/bjnano.9.59

• nanoarchitectures with underlying mechanisms. For example, the velvet black scales on snake skins have been shown to demonstrate four times better absorbance than other scales in the UV–NIR spectrum range due to their hierarchical pattern of leaf-like microstructures with nanoridges [150]. In other case, the

Fabrication and photoactivity of ionic liquid–TiO₂ structures for efficient visible-light-induced photocatalytic decomposition of organic pollutants in aqueous phase

• Anna Gołąbiewska,
• Marta Paszkiewicz-Gawron,
• Aleksandra Sadzińska,
• Wojciech Lisowski,
• Ewelina Grabowska,
• Adriana Zaleska-Medynska and
• Justyna Łuczak

Beilstein J. Nanotechnol. 2018, 9, 580–590, doi:10.3762/bjnano.9.54

• photoactivity under visible-light irradiation is presented in Figure 3. The average size of the microspheres, calculated based on the statistical average size of 100 microstructures, is also included in this figure. The four main fractions of TiO2 microspheres have been recognized. Generally, for all the

Temperature-tunable lasing from dye-doped chiral microdroplets encapsulated in a thin polymeric film

• Gia Petriashvili,
• Mauro Daniel Luigi Bruno,
• Maria Penelope De Santo and
• Riccardo Barberi

Beilstein J. Nanotechnol. 2018, 9, 379–383, doi:10.3762/bjnano.9.37

• these microstructures, the emulsion is confined in a cuvette and pumped with the second harmonic of a Q-switched Nd:YAG laser (Continuum Surelite II). The pulse wavelength, width and repetition rate are 532 nm, 4 ns and 5 Hz, respectively. The pulse energy density is 6 mJ/cm2. The cuvette is placed on a

BN/Ag hybrid nanomaterials with petal-like surfaces as catalysts and antibacterial agents

• Konstantin L. Firestein,
• Denis V. Leybo,
• Alexander E. Steinman,
• Andrey M. Kovalskii,
• Andrei T. Matveev,
• Anton M. Manakhov,
• Irina V. Sukhorukova,
• Pavel V. Slukin,
• Nadezda K. Fursova,
• Sergey G. Ignatov,
• Dmitri V. Golberg and
• Dmitry V. Shtansky

Beilstein J. Nanotechnol. 2018, 9, 250–261, doi:10.3762/bjnano.9.27

• vapours, and (ii) ultraviolet (UV) decomposition of AgNO3 in a suspension of BN NPs. The hybrid microstructures were studied by high-resolution transmission electron microscopy (HRTEM), high-angular dark field scanning TEM imaging paired with energy dispersion X-ray (EDX) mapping, X-ray photoelectron

• ) decomposition of AgNO3 in a suspension of BN NPs. Both methods resulted in partial oxidation of Ag during processing. Then, the obtained materials have been characterized in terms of their microstructures, thermal stability, Ag+ ion release, and catalytic and antibacterial activities. Results and Discussion

Review on optofluidic microreactors for artificial photosynthesis

• Xiaowen Huang,
• Jianchun Wang,
• Tenghao Li,
• Jianmei Wang,
• Min Xu,
• Weixing Yu,
• Abdel El Abed and
• Xuming Zhang

Beilstein J. Nanotechnol. 2018, 9, 30–41, doi:10.3762/bjnano.9.5

• -photoreactors to culture microorganisms to produce microalgae, bioenergy and biomass [63]. Broadly speaking, these bio-photoreactors also belong to optofluidics-based APS, but they are not covered in this article since many of them use large reactors and are thus not related to microstructures. The following

Direct writing of gold nanostructures with an electron beam: On the way to pure nanostructures by combining optimized deposition with oxygen-plasma treatment

• Domagoj Belić,
• Mostafa M. Shawrav,
• Emmerich Bertagnolli and
• Heinz D. Wanzenboeck

Beilstein J. Nanotechnol. 2017, 8, 2530–2543, doi:10.3762/bjnano.8.253

• microstructures can be fabricated by one-step direct-write lithography process using focused electron beam induced deposition (FEBID). Typically, as-deposited gold nanostructures suffer from a low Au content and unacceptably high carbon contamination. We show that the undesirable carbon contamination can be