Serum type and concentration both affect the protein-corona composition of PLGA nanoparticles

• Katrin Partikel,
• Robin Korte,
• Dennis Mulac,
• Hans-Ulrich Humpf and
• Klaus Langer

Beilstein J. Nanotechnol. 2019, 10, 1002–1015, doi:10.3762/bjnano.10.101

• obtained from Promega Corporation (Madison, USA). Urea was purchased from Acros Organics (New Jersey, USA). Human liver cancer cells (HepG2) were kindly provided by the Institute of Food Chemistry of the University of Muenster, Germany. Phosphate-buffered saline (PBS), Dulbecco’s modified Eagle’s medium

• with Lumogen® Red-loaded PLGA NPs, free Lumogen® Red or serum-free medium as previously described. After 6 h, the cells were washed twice with phosphate-buffered saline (PBS++, containing Ca2+ and Mg2+) and fixed for 15 min with 4% paraformaldehyde at room temperature. After an additional washing step

Direct growth of few-layer graphene on AlN-based resonators for high-sensitivity gravimetric biosensors

• Jimena Olivares,
• Teona Mirea,
• Lorena Gordillo-Dagallier,
• Bruno Marco,
• José Miguel Escolano,
• Marta Clement and
• Enrique Iborra

Beilstein J. Nanotechnol. 2019, 10, 975–984, doi:10.3762/bjnano.10.98

• sample in a solution of 0.2 nM 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC) with 0.8 mM N-hydroxysuccinimide (NHS) in 10 mM phosphate-buffered saline (PBS). This step requires the generation of carboxyl groups (–COOH) on the surface of the sample capable of binding the NH groups of

Experimental study of an evanescent-field biosensor based on 1D photonic bandgap structures

• Jad Sabek,
• Francisco Javier Díaz-Fernández,
• Luis Torrijos-Morán,
• Zeneida Díaz-Betancor,
• Ángel Maquieira,
• María-José Bañuls,
• Elena Pinilla-Cienfuegos and
• Jaime García-Rupérez

Beilstein J. Nanotechnol. 2019, 10, 967–974, doi:10.3762/bjnano.10.97

• results obtained for one of the groups of PBG sensing structures in the biosensing experiments carried out. After an initial flow of PBS-T buffer (phosphate buffered saline + 0.01% Tween 20) over a period of 10 min to establish the baseline, BSA 1 µg/mL in PBS-T was flowed over the biofunctionalized PBG

Effects of gold and PCL- or PLLA-coated silica nanoparticles on brain endothelial cells and the blood–brain barrier

• Aniela Bittner,
• Angélique D. Ducray,
• Hans Rudolf Widmer,
• Michael H. Stoffel and
• Meike Mevissen

Beilstein J. Nanotechnol. 2019, 10, 941–954, doi:10.3762/bjnano.10.95

• Au-NPs for 2 h or 24 h. Non-exposed cells were used as control. At the end of NP exposure, exposed and non-exposed cells were incubated with MTT dissolved in phosphate-buffered saline (PBS) (Life Technologies, UK) for 4 h at 37 °C and 5% CO2 (final concentration: [0.5 mg/mL]). The cell culture medium

• ) [10][46]. Immunofluorescence staining and transmission electron microscopy After PCL- or PLLA-NP exposure, cells grown in 0.1% gelatin-coated 96-well plates or on coverslips were fixed with cold 4% paraformaldehyde for 20 min at room temperature. Following two washing steps with Dulbecco’s phosphate

The systemic effect of PEG-nGO-induced oxidative stress in vivo in a rodent model

• Qura Tul Ain,
• Samina Hyder Haq,
• Abeer Alshammari,
• Moudhi Abdullah Al-Mutlaq and
• Muhammad Naeem Anjum

Beilstein J. Nanotechnol. 2019, 10, 901–911, doi:10.3762/bjnano.10.91

• graphite powder, potassium permanganate, phosphoric acid (85%), sulfuric acid (98%), and hydrogen peroxide (30%). Polyethylene glycol (PEG) was used for PEGylation. Thiobarbituric acid (TBA, 0.6%), and trichloroacetic acid (TCA, 20%) were used to estimate the malondialdehyde (MDA) level, sodium phosphate

• sterilized scalpel and iris scissors. All organs were washed with saline and were homogenized with a total volume of 10 mL using sterilized phosphate-buffered saline (pH 7.4). All used protocols were approved by the Animal Ethics Committee of King Saud University, in accordance with the international guiding

• Aebi protocol [54]. Concisely, 0.5 mL of diluted enzyme (homogenized tissue) was added into 1.5 mL of (0.4 M) sodium phosphate buffer of pH 7.2. Then, 1 mL of hydrogen peroxide was added to the mixture and enzyme activity was measured at 240 nm for 2 min. Finally, CAT volume activity was calculated as

An iridescent film of porous anodic aluminum oxide with alternatingly electrodeposited Cu and SiO₂ nanoparticles

• Menglei Chang,
• Huawen Hu,
• Haiyan Quan,
• Hongyang Wei,
• Zhangyi Xiong,
• Jiacong Lu,
• Pin Luo,
• Yaoheng Liang,
• Jianzhen Ou and
• Dongchu Chen

Beilstein J. Nanotechnol. 2019, 10, 735–745, doi:10.3762/bjnano.10.73

• angles led to a variation of the structural color from red to blue-purple, and the SiO2 particle size was also found to have an influence on the film color [14]. Furthermore, an AAO template was firstly prepared in an electrolyte with an alkaline silica gel and phosphate, onto which a layer of an Au film

Review of time-resolved non-contact electrostatic force microscopy techniques with applications to ionic transport measurements

• Aaron Mascaro,
• Yoichi Miyahara,
• Tyler Enright,
• Omur E. Dagdeviren and
• Peter Grütter

Beilstein J. Nanotechnol. 2019, 10, 617–633, doi:10.3762/bjnano.10.62

• + conducting glasses [7]. To further expand the power of the technique, Mascaro et al. developed a real-time averaging system used in conjunction with a fast (high-bandwidth) PLL to improve the time resolution [12]. This enabled ionic transport measurements to be performed on lithium iron phosphate (LiFePO4

Nanoporous water oxidation electrodes with a low loading of laser-deposited Ru/C exhibit enhanced corrosion stability

• Sandra Haschke,
• Dmitrii Pankin,
• Vladimir Mikhailovskii,
• Maïssa K. S. Barr,
• Adriana Both-Engel,
• Alina Manshina and
• Julien Bachmann

Beilstein J. Nanotechnol. 2019, 10, 157–167, doi:10.3762/bjnano.10.15

• 4 phosphate electrolyte prepared from 0.1 M KH2PO4. The stability of the Al2O3 template and ITO backside contact in pH 4 conditions was verified with SEM after 20 h in the electrolyte. All electrochemical measurements including cyclic voltammetry (CV), linear sweep voltammetry (LSV) and steady-state

Scanning probe microscopy for energy-related materials

• Rüdiger Berger,
• Benjamin Grévin,
• Philippe Leclère and
• Yi Zhang

Beilstein J. Nanotechnol. 2019, 10, 132–134, doi:10.3762/bjnano.10.12

• relationship between Li-ion conductivity and the microstructure of the solid-state electrolyte lithium aluminum titanium phosphate films [10]. Furthermore, dielectric properties play a role for the storage of electrochemical energy. Ying Wang and co-workers report on a novel method for the characterization of

New micro/mesoporous nanocomposite material from low-cost sources for the efficient removal of aromatic and pathogenic pollutants from water

• Emmanuel I. Unuabonah,
• Robert Nöske,
• Jens Weber,
• Christina Günter and
• Andreas Taubert

Beilstein J. Nanotechnol. 2019, 10, 119–131, doi:10.3762/bjnano.10.11

• +, Ni2+ [1], and methylene blue [4] from an aqueous solution. However, this material fails when attempting to remove anionic pollutants such as 4-nitrophenol (with a pKa of 7.2 [45]), methyl orange dye, or phosphate. The data demonstrate that the 2Z-HYCA nanocomposite is able to overcome the limitations

Characterization and influence of hydroxyapatite nanopowders on living cells

• Przemyslaw Oberbek,
• Tomasz Bolek,
• Adrian Chlanda,
• Seishiro Hirano,
• Sylwia Kusnieruk,
• Julia Rogowska-Tylman,
• Ganna Nechyporenko,
• Viktor Zinchenko,
• Wojciech Swieszkowski and
• Tomasz Puzyn

Beilstein J. Nanotechnol. 2018, 9, 3079–3094, doi:10.3762/bjnano.9.286

• (OH)2) is a calcium phosphate, structurally and chemically similar to the mineral phase of human bone and teeth. Due to its high biocompatibility and bioactivity, it has been successfully applied in the manufacturing of cosmetics and hygiene products, as well as in bone-tissue engineering and

• in the 2θ range of 10–60° and with a step size of 0.02° at room temperature. Obtained spectra were imported into „Match!” software and compared to the reference spectra from the ICDD PDF-2 database (The International Center for Diffraction Data, 2015) for calcium phosphate hydroxide (hydroxyapatite

• interaction of HAp nanoobjects with cells when they are in the interior of the cells instead of being outside in close proximity. The growth stimulation in cells is probably related to a boost of PO43− that are a product of HAp dissolution. Phosphate groups can be used for ATP synthesis in mitochondria [63

A novel polyhedral oligomeric silsesquioxane-modified layered double hydroxide: preparation, characterization and properties

• Xianwei Zhang,
• Zhongzhu Ma,
• Hong Fan,
• Carla Bittencourt,
• Jintao Wan and
• Philippe Dubois

Beilstein J. Nanotechnol. 2018, 9, 3053–3068, doi:10.3762/bjnano.9.284

• nanofillers. So far, many organic modifiers have been successfully used to modify LDHs. One of the most commonly used is sodium dodecylbenzene sulfonate (SDBS) [7][14]. Other modifiers include a variety of sulfate and phosphate surfactants [15][16][17], aliphatic and aromatic mono- and dicarboxylic acids [18

Co-intercalated layered double hydroxides as thermal and photo-oxidation stabilizers for polypropylene

• Qian Zhang,
• Qiyu Gu,
• Fabrice Leroux,
• Pinggui Tang,
• Dianqing Li and
• Yongjun Feng

Beilstein J. Nanotechnol. 2018, 9, 2980–2988, doi:10.3762/bjnano.9.277

• HALS and MP also occur, such as the carbonyl group of HALS at 1621 cm−1 (C=O) and the phosphate group of MP at 1181 cm−1 (P=O), 1050 cm−1 (P–O–C). Compared with 1645 cm−1 in HALS and 1164 cm−1 in MP-Ca, shifts of C=O and P=O are observed to 1621 cm−1 in HALS-Ca2Al and 1182 cm−1 in MP-Ca2Al

The nanoscaled metal-organic framework ICR-2 as a carrier of porphyrins for photodynamic therapy

• Jan Hynek,
• Sebastian Jurík,
• Martina Koncošová,
• Jaroslav Zelenka,
• Ivana Křížová,
• Tomáš Ruml,
• Kaplan Kirakci,
• Ivo Jakubec,
• František Kovanda,
• Kamil Lang and
• Jan Demel

Beilstein J. Nanotechnol. 2018, 9, 2960–2967, doi:10.3762/bjnano.9.275

• in all of these studies. However, the drawback of zirconium-based MOFs is the degradation in the presence of phosphate buffer (Figure S1, Supporting Information File 1) and therefore the mode of action is highly disputable [15]. In this work, we employed metal-organic framework ICR-2 (ICR stands for

• Inorganic Chemistry Rez) constructed from Fe3+ and phenylene-1,4-bis(methylphosphinic acid) (PBPA) linkers [25]. ICR-2 in the microcrystalline form is stable in aqueous solutions even at high temperatures and partly retains its structure and porosity even after treatment with phosphate buffer saline (PBS

• ), absolute ethanol (EtOH, Fischer Sci.), FeCl3·6H2O, formamide, and phosphate-buffered saline suitable for cell culture (all Sigma-Aldrich) were used as purchased. Phenylene-1,4-bis(methylphosphinic acid) was prepared according to [25]. Phosphinic acid porphyrins 5,10,15,20-tetrakis(4-methylphosphinatophenyl

Comparative biological effects of spherical noble metal nanoparticles (Rh, Pd, Ag, Pt, Au) with 4–8 nm diameter

• Alexander Rostek,
• Marina Breisch,
• Kevin Pappert,
• Kateryna Loza,
• Marc Heggen,
• Manfred Köller,
• Christina Sengstock and
• Matthias Epple

Beilstein J. Nanotechnol. 2018, 9, 2763–2774, doi:10.3762/bjnano.9.258

• GmbH, Heidelberg, Germany). The cells were maintained at 37 °C in a humidified 5% CO2 atmosphere and sub-cultivated every 7–14 days, depending on the cell proliferation. Adherent cells were washed with phosphate-buffered saline solution (PBS, GIBCO, Invitrogen GmbH) and detached from the culture flasks

Cytotoxicity of doxorubicin-conjugated poly[N-(2-hydroxypropyl)methacrylamide]-modified γ-Fe₂O₃ nanoparticles towards human tumor cells

• Zdeněk Plichta,
• Yulia Kozak,
• Rostyslav Panchuk,
• Viktoria Sokolova,
• Matthias Epple,
• Lesya Kobylinska,
• Pavla Jendelová and
• Daniel Horák

Beilstein J. Nanotechnol. 2018, 9, 2533–2545, doi:10.3762/bjnano.9.236

• , USA). Methacryloyl chloride (Sigma-Aldrich) was distilled and 2,2′-azobis(2-methylpropionitrile) (AIBN; Fluka; Buchs, Switzerland) was recrystallized from ethanol. Doxorubicin hydrochloride (Dox) was from TCI Chemicals (Tokyo, Japan). Phosphate buffered saline (PBS) was prepared on site. 1,2

Non-agglomerated silicon–organic nanoparticles and their nanocomplexes with oligonucleotides: synthesis and properties

• Asya S. Levina,
• Marina N. Repkova,
• Nadezhda V. Shikina,
• Zinfer R. Ismagilov,
• Svetlana A. Yashnik,
• Dmitrii V. Semenov,
• Yulia I. Savinovskaya,
• Natalia A. Mazurkova,
• Inna A. Pyshnaya and
• Valentina F. Zarytova

Beilstein J. Nanotechnol. 2018, 9, 2516–2525, doi:10.3762/bjnano.9.234

• of low molecular weight polymer chains with [─Si(OH)(C3H6NH2)O─] monomer units. Oligonucleotides (ODN) were conjugated to the prepared Si–NH2 nanoparticles using the electrostatic interaction between positively charged amino groups of nanoparticles and negatively charged internucleotide phosphate

• conjugated with oligodeoxyribonucleotides (ODN) through the binding to the negatively charged internucleotide phosphate groups to form Si–NH2·ODN complexes. Like Si–NH2, the Si–NH2·ODN nanocomplexes are dissolved in aqueous solutions. The addition of NaCl did not lead to precipitation. Si–NH2 and Si–NH2·ODN

• can be precipitated by acetone. The unbound oligonucleotide after precipitation of Si–NH2·ODN remains in solution and can be detected spectrophotometrically. This “acetone precipitation” technique allowed us to evaluate the optimal molar ratio of the amino groups in the nanoparticles to the phosphate

Enhanced antineoplastic/therapeutic efficacy using 5-fluorouracil-loaded calcium phosphate nanoparticles

• Shanid Mohiyuddin,
• Saba Naqvi and
• Gopinath Packirisamy

Beilstein J. Nanotechnol. 2018, 9, 2499–2515, doi:10.3762/bjnano.9.233

• , retention, and low toxicity, as well as surface engineering with targeting moieties, can be used as a tool in enhancing the therapeutic efficacy of current approaches. Inorganic calcium phosphate nanoparticles have the potential to increase the therapeutic potential of antiproliferative drugs due to their

• excellent loading efficiency, biodegradable nature and controlled-release behaviour. Herein, we report a novel system of 5-fluorouracil (5-FU)-loaded calcium phosphate nanoparticles (CaP@5-FU NPs) synthesized via a reverse micelle method. The formation of monodispersed, spherical, crystalline nanoparticles

• upon CaP@5-FU NP treatment. Likewise, the cell cycle analysis was performed to confirm the enhanced apoptotic induction. Our study concludes that the calcium phosphate nanocarriers system, i.e. CaP@5-FU NPs, has higher antineoplastic potential as compared to 5-FU alone and can be used as an improved

Nanocellulose: Recent advances and its prospects in environmental remediation

• Katrina Pui Yee Shak,
• Yean Ling Pang and
• Shee Keat Mah

Beilstein J. Nanotechnol. 2018, 9, 2479–2498, doi:10.3762/bjnano.9.232

• −), phosphate (PO43−), fluoride (F−), and sulphate (SO42−). Cationic CNFs exhibited higher selectivity towards multivalent ions (PO43− and SO42−) than monovalent ions (F− and NO3−). On the other hand, the development of nanocellulose composites as adsorbents with numerous supportive properties, magnetic

Hydrothermal-derived carbon as a stabilizing matrix for improved cycling performance of silicon-based anodes for lithium-ion full cells

• Mirco Ruttert,
• Florian Holtstiege,
• Jessica Hüsker,
• Markus Börner,
• Martin Winter and
• Tobias Placke

Beilstein J. Nanotechnol. 2018, 9, 2381–2395, doi:10.3762/bjnano.9.223

• efficiencies (EEs) of the pure carbon matrix, the C:Si 90:10, and C:Si 80:20 composite in the rate performance experiments are summarized in Figure S2 (Supporting Information File 1). The EEs and VEs were calculated as described by Meister et al. [8], using a virtual lithium iron phosphate (LFP) cathode with a

• . After the formation, the EE and VE are very similar to each other, with the VE being slightly higher in each cycle. The EEs and VEs obtained in this work are in a very similar range to those reported by Meister et al. for hard carbon and graphite anodes, where a virtual lithium iron phosphate cathode

The structural and chemical basis of temporary adhesion in the sea star Asterina gibbosa

• Birgit Lengerer,
• Marie Bonneel,
• Mathilde Lefevre,
• Elise Hennebert,
• Philippe Leclère,
• Emmanuel Gosselin,
• Peter Ladurner and
• Patrick Flammang

Beilstein J. Nanotechnol. 2018, 9, 2071–2086, doi:10.3762/bjnano.9.196

• of tube foot sections and footprints Antibody labelling was performed as previously described [8]. Briefly, tube feet were fixed in 4% PFA in phosphate buffered saline (PBS) for 24 h. They were subsequently dehydrated in graded ethanol, embedded in paraffin wax and cut longitudinally. After dewaxing

Nanoconjugates of a calixresorcinarene derivative with methoxy poly(ethylene glycol) fragments for drug encapsulation

• Alina M. Ermakova,
• Julia E. Morozova,
• Yana V. Shalaeva,
• Victor V. Syakaev,
• Aidar T. Gubaidullin,
• Alexandra D. Voloshina,
• Vladimir V. Zobov,
• Irek R. Nizameev,
• Olga B. Bazanova,
• Igor S. Antipin and
• Alexander I. Konovalov

Beilstein J. Nanotechnol. 2018, 9, 2057–2070, doi:10.3762/bjnano.9.195

• nanoassociates that are able to encapsulate organic substrates of different hydrophobicity, including drugs (doxorubicin, naproxen, ibuprofen, quercetin). The micelles of the macrocycle slowed down the release of the hydrophilic substrates in vitro. In physiological sodium chloride solution and phosphate

• a phase separation up to 90 °C, while solutions of 3 in a physiological solution of sodium chloride (0.9% NaCl) solution or in phosphate-buffered saline (PBS, pH 7.4) clouded at 60 °C (Figure 4a). DLS method showed that an increase of the particle size of 3 in the presence of salts occurred already

• aggregates” (with average diameters of 142–164 nm) in physiological sodium chloride solution or in phosphate-buffered saline solution and become temperature-responsive. The obtained conjugate of calixresorcinarene and mPEG exhibits low hemotoxicity. It is capable to encapsulate organic compounds of various

Biomimetic and biodegradable cellulose acetate scaffolds loaded with dexamethasone for bone implants

• Aikaterini-Rafailia Tsiapla,
• Varvara Karagkiozaki,
• Veroniki Bakola,
• Foteini Pappa,
• Panagiota Gkertsiou,
• Eleni Pavlidou and
• Stergios Logothetidis

Beilstein J. Nanotechnol. 2018, 9, 1986–1994, doi:10.3762/bjnano.9.189

• -Aldrich, Germany. N,N-Dimethylacetamide was obtained from Chem-Lab NV, Belgium. In MTT assay the cells used in this study were mice fibroblasts (L929) and phosphate-buffered saline (PBS), Dulbecco’s Modifies Eagle Medium (DMEM), 10% fetal bovine serum (FBS) and antibiotics were obtained from Gibco® Cell

Preparation of micro/nanopatterned gelatins crosslinked with genipin for biocompatible dental implants

• Reika Makita,
• Tsukasa Akasaka,
• Seiichi Tamagawa,
• Yasuhiro Yoshida,
• Saori Miyata,
• Hirofumi Miyaji and
• Tsutomu Sugaya

Beilstein J. Nanotechnol. 2018, 9, 1735–1754, doi:10.3762/bjnano.9.165

• with genipin [39]. Nadeem et al. have also reported that three-dimensional calcium phosphate/gelatin composite scaffolds, with an integrated surface pattern, could be fabricated by crosslinking with genipin [38]. These calcium phosphate/gelatin composite scaffolds could be fabricated with 40 µm pits

Correlative electrochemical strain and scanning electron microscopy for local characterization of the solid state electrolyte Li_1.3Al_0.3Ti_1.7(PO₄)₃

• Nino Schön,
• Deniz Cihan Gunduz,
• Shicheng Yu,
• Hermann Tempel,
• Roland Schierholz and
• Florian Hausen

Beilstein J. Nanotechnol. 2018, 9, 1564–1572, doi:10.3762/bjnano.9.148

• , section JARA-Energy, 52425 Jülich, Germany 10.3762/bjnano.9.148 Abstract Correlative microscopy has been used to investigate the relationship between Li-ion conductivity and the microstructure of lithium aluminum titanium phosphate (Li1.3Al0.3Ti1.7(PO4)3, LATP) with high spatial resolution. A key to

• energy density [1][8][9][10]. Lithium aluminum titanium phosphate Li1.3Al0.3Ti1.7(PO4)3 (LATP), a ceramic with NASICON-type structure, is especially considered as a beneficial solid state electrolyte due to its superior lithium-ion conductivity in the range of 2 mS cm−1 in the “bulk” and 2 µS cm−1 at

• darker and contains the elements Al, P and O but only minor Ti content. Based on this observation, the primary phase is attributed to LATP while the secondary phase can be related to aluminum phosphate (AlPO4). As the stoichiometry of the EDX analysis matches that of LATP and aluminum phosphate