Self-standing heterostructured NiC_x-NiFe-NC/biochar as a highly efficient cathode for lithium–oxygen batteries

• Shengyu Jing,
• Xu Gong,
• Shan Ji,
• Linhui Jia,
• Bruno G. Pollet,
• Sheng Yan and
• Huagen Liang

Beilstein J. Nanotechnol. 2020, 11, 1809–1821, doi:10.3762/bjnano.11.163

• batteries [7][8][9][10]). In order to meet the requirements for efficient catalysts in practical applications, platinum group metal (PGM)-based catalysts are currently used as principal catalysts to reduce the overpotential of ORR and OER due to their slow kinetics [11][12][13]. The high cost, poor

Electron beam-induced deposition of platinum from Pt(CO)₂Cl₂ and Pt(CO)₂Br₂

• Aya Mahgoub,
• Hang Lu,
• Rachel M. Thorman,
• Konstantin Preradovic,
• Titel Jurca,
• Lisa McElwee-White,
• Howard Fairbrother and
• Cornelis W. Hagen

Beilstein J. Nanotechnol. 2020, 11, 1789–1800, doi:10.3762/bjnano.11.161

• platinum precursors, Pt(CO)2Cl2 and Pt(CO)2Br2, were designed for focused electron beam-induced deposition (FEBID) with the aim of producing platinum deposits of higher purity than those deposited from commercially available precursors. In this work, we present the first deposition experiments in a

• -dispersive X-ray spectroscopy (EDX); focused electron beam-induced deposition (FEBID); nanofabrication; platinum precursors; scanning electron microscopy (SEM); thermogravimetric analysis (TGA); Introduction Focused electron beam-induced deposition (FEBID) is a direct-write nanopatterning technique. FEBID

• respect but are thermally unstable, for instance, ClAuCO and ClAuPF3 [11][12][13]. Therefore, it is desirable to design new stable precursors that enable the deposition of pure metals. In this work, two novel platinum precursors (Pt(CO)2Cl2 and Pt(CO)2Br2) were synthesized and tested. Both Pt(CO)2X2

Helium ion microscope – secondary ion mass spectrometry for geological materials

• Matthew R. Ball,
• Richard J. M. Taylor,
• Joshua F. Einsle,
• Fouzia Khanom,
• Christelle Guillermier and
• Richard J. Harrison

Beilstein J. Nanotechnol. 2020, 11, 1504–1515, doi:10.3762/bjnano.11.133

• , typically gold, using a sputter coater. Here we employ a similar technique, coating samples with either gold or platinum, or, in the case of analysis of platinum-group elements [15], carbon. This coating is removed by the action of the primary beam in the region of interest prior to analysis, allowing for

• , this same standard is required to maintain this homogeneity at a nanometre length scale in order to be used accurately with the HIM–SIMS instrument. It is extremely difficult to manufacture a standard material for all elements that is homogeneous at the nanometre scale. Platinum group elements, for

Wafer-level integration of self-aligned high aspect ratio silicon 3D structures using the MACE method with Au, Pd, Pt, Cu, and Ir

• Mathias Franz,
• Romy Junghans,
• Paul Schmitt,
• Adriana Szeghalmi and
• Stefan E. Schulz

Beilstein J. Nanotechnol. 2020, 11, 1439–1449, doi:10.3762/bjnano.11.128

• also investigated palladium (Pd), platinum (Pt), and to a lesser extent even copper (Cu) [20][21][22]. However, there is no study analysing iridium (Ir) as catalytic metal. According to its standard reduction potential of 1.16 V, it is comparable to Pt (1.18 V) and Pd (0.95 V) and should work

• structures, while etching with platinum-group metals (Pt, Pd, or Ir) yields predominantly nanoporous sponge-like structures. We demonstrated the MACE process with the noble metals Au, Pt, Pd, Cu, and, as a novelty, with Ir. Depending on the contamination budget of the integrated system one can select an

• PVD methods. The deposition of gold and palladium was done by magnetron sputtering. The film thickness has been adjusted by the use of a calibrated deposition rate. Ion beam sputter deposition (IBSD) has been used to deposit platinum and copper. For copper deposition, the thickness has been controlled

One-step synthesis of carbon-supported electrocatalysts

• Sebastian Tigges,
• Nicolas Wöhrl,
• Ivan Radev,
• Ulrich Hagemann,
• Markus Heidelmann,
• Thai Binh Nguyen,
• Stanislav Gorelkov,
• Stephan Schulz and
• Axel Lorke

Beilstein J. Nanotechnol. 2020, 11, 1419–1431, doi:10.3762/bjnano.11.126

• platinum loading, degree of oxidation, and the very narrow particle size distribution are precisely adjusted in the Pt/C hybrid material due to the simultaneous deposition of platinum and carbon during the process. The as-synthesized Pt/C hybrid materials are promising electrocatalysts for use in fuel cell

• commercial production of fuel cell catalysts, especially the scarcity of noble metals and the insufficient electrochemical long-term stability. Even though the surface-to-volume ratio can be drastically increased by the use of nanoparticles instead of thin films, the amount of noble metal (usually platinum

• process at a substrate temperature as low as 350 °C using platinum acetylacetonate as a single-source precursor was established for the deposition of a Pt/C electrocatalyst. Platinum in the form of NPs is homogeneously distributed in a carbon support structure due to the simultaneous deposition of both

Structure and electrochemical performance of electrospun-ordered porous carbon/graphene composite nanofibers

• Yi Wang,
• Yanhua Song,
• Chengwei Ye and
• Lan Xu

Beilstein J. Nanotechnol. 2020, 11, 1280–1290, doi:10.3762/bjnano.11.112

• 50 °C. Then the dried CGCNF membranes were weighed to an accuracy of 0.001 g and clamped to a platinum plate electrode holder. After clamping, the CGCNF membranes were directly used as cell electrodes and immersed into an electrolyte solution. The electrochemical measurements were performed in a

Revealing the local crystallinity of single silicon core–shell nanowires using tip-enhanced Raman spectroscopy

• Marius van den Berg,
• Ardeshir Moeinian,
• Arne Kobald,
• Yu-Ting Chen,
• Anke Horneber,
• Steffen Strehle,
• Alfred J. Meixner and
• Dai Zhang

Beilstein J. Nanotechnol. 2020, 11, 1147–1156, doi:10.3762/bjnano.11.99

• , Germany 10.3762/bjnano.11.99 Abstract Tip-enhanced Raman spectroscopy is combined with polarization angle-resolved spectroscopy to investigate the nanometer-scale structural properties of core–shell silicon nanowires (crystalline Si core and amorphous Si shell), which were synthesized by platinum

• of the nanowire exhibits an amorphous morphology. Confocal optical microscopy of silicon nanowires As the first step, core–shell SiNWs grown with a platinum catalyst [29] are characterized using a custom-built confocal optical microscope. Figure 2a shows the representative geometry of these SiNWs

Straightforward synthesis of gold nanoparticles by adding water to an engineered small dendrimer

• Sébastien Gottis,
• Régis Laurent,
• Vincent Collière and
• Anne-Marie Caminade

Beilstein J. Nanotechnol. 2020, 11, 1110–1118, doi:10.3762/bjnano.11.95

• ], platinum [31], ruthenium (in the presence of a reducer) [32], titanium oxo-clusters [33][34] and even from crystals of Au55 gold clusters [35][36]. In most cases, the oxidation state of the metal precursor was either zero (Pd0, Pt0, Au0) or four (TiIVO2 clusters) and no change in the oxidation state

Gas-sensing features of nanostructured tellurium thin films

• Dumitru Tsiulyanu

Beilstein J. Nanotechnol. 2020, 11, 1010–1018, doi:10.3762/bjnano.11.85

• performed using a DRONE–YM1 (Burevestnik, Russia) diffractometer with Fe Kα radiation. The rotational velocity of the scintillation counter was set to be either 2 or 4°/min. For the electrical and gas-sensing characterization, the samples were supplied with symmetrical gold or platinum electrodes

• both the heating and the annealing of the samples, the test cell was mounted inside a furnace. A platinum temperature detector (PT-100, Cliptec Kabeltechnik, Germany) was placed close to the film and was used to assist with the temperature control. The data was processed using a PC equipped with a data

Atomic layer deposition for efficient oxygen evolution reaction at Pt/Ir catalyst layers

• Stefanie Schlicht,
• Korcan Percin,
• Stefanie Kriescher,
• André Hofer,
• Claudia Weidlich,
• Matthias Wessling and
• Julien Bachmann

Beilstein J. Nanotechnol. 2020, 11, 952–959, doi:10.3762/bjnano.11.79

• the performance comparison. Results and Discussion Catalyst coating: thermal decomposition In the thermal decomposition method, platinum and iridium metal salts (the perchlorometallates) were dissolved in 1:1 ratio in butanol to form the catalyst precursor solution. The Ti felts (two distinct

• and combining individual ALD cycles of two or more materials. The deposition of platinum and iridium as a binary catalyst can be realized at very low loadings in the range of micrograms per square centimeter [26]. Specifically, the applicability of ALD regarding Ir and bimetallic Pt/Ir catalysts, the

• the coating of commercial titanium felts, the surface area of which is enhanced by either thermal acid etching or electrochemical “anodization”. Platinum and iridium catalysts are deposited either by dip-coating/thermal decomposition from a solution of noble metal salts or by atomic layer deposition

A set of empirical equations describing the observed colours of metal–anodic aluminium oxide–Al nanostructures

• Cristina V. Manzano,
• Jakob J. Schwiedrzik,
• Gerhard Bürki,
• Laszlo Pethö,
• Johann Michler and
• Laetitia Philippe

Beilstein J. Nanotechnol. 2020, 11, 798–806, doi:10.3762/bjnano.11.64

• focused ion beam (FIB) instrument (TESCAN Lyra, Brno, Czech Republic) with a gallium source at 30 kV and 180–400 pA. 2 µm of platinum was deposited to protect the surface prior to FIB cutting. FESEM images were taken in three different areas of the films and three different measurements were carried out

Current measurements in the intermittent-contact mode of atomic force microscopy using the Fourier method: a feasibility analysis

• Berkin Uluutku and
• Santiago D. Solares

Beilstein J. Nanotechnol. 2020, 11, 453–465, doi:10.3762/bjnano.11.37

• existing commercial devices with this type of excitation cannot always provide reliable and sufficiently strong excitation suitable for all types of AFM probes. This has, in fact, been the case when we have attempted to drive solid platinum probes in our laboratory, for which our thermal excitation did not

Electrochemically derived functionalized graphene for bulk production of hydrogen peroxide

• Munaiah Yeddala,
• Pallavi Thakur,
• Anugraha A and
• Tharangattu N. Narayanan

Beilstein J. Nanotechnol. 2020, 11, 432–442, doi:10.3762/bjnano.11.34

• graphitic structures is found to be an engineering pathway for altering the inert catalytic activity of planar honeycomb lattices of graphene and its derivatives [34][35]. It has been found that certain heteroatoms doped into graphene can even outperform the benchmark catalysts such as platinum (Pt/C) in

• platinum ring (potential kept at 1.5 V vs RHE) at 10 mV/s scan rate at 1600 rotation per minute (rpm) for the electrode. The experiments are also carried out at different rotation speeds, and the data is given in Supporting Information File 1, Figure S7. The electrochemical parameters derived from these

• path in EEG samples while the sharp Faradaic current enhancement followed by a plateau in Pt/C shows that it is a one-step reduction process. The quantity of H2O2 produced is analyzed using a platinum ring electrode at 1.5 V vs RHE. The ring current is higher (0.067 mA) for highly functionalized

High-performance asymmetric supercapacitor made of NiMoO₄ nanorods@Co₃O₄ on a cellulose-based carbon aerogel

• Meixia Wang,
• Jing Zhang,
• Xibin Yi,
• Benxue Liu,
• Xinfu Zhao and
• Xiaochan Liu

Beilstein J. Nanotechnol. 2020, 11, 240–251, doi:10.3762/bjnano.11.18

• counter electrode were a saturated calomel electrode (SCE) and a platinum electrode, respectively. Figure 6a shows the cyclic voltammetry (CV) curves of the NiMoO4@Co3O4/CA electrode at voltage scan rates of 2.5–50 mV/s. All the CV curves shown in Figure 6a consist of a pair of strong redox current peaks

• 12 h. The electrodes loaded with the hybrid were then pressed at 5.0 MPa. The SCE and platinum electrodes were used as the reference and counter electrodes, respectively. The specific capacities were calculated from the GCD curves using C = IΔt/m, where I is the charge–discharge current, Δt is the

Simple synthesis of nanosheets of rGO and nitrogenated rGO

• Pallellappa Chithaiah,
• Madhan Mohan Raju,
• Giridhar U. Kulkarni and
• C. N. R. Rao

Beilstein J. Nanotechnol. 2020, 11, 68–75, doi:10.3762/bjnano.11.7

• glassy carbon working electrode (3 mM), a platinum wire counter electrode and a Hg/Hg2SO4 reference electrode with 1 M H2SO4 electrolyte. The specific capacitance (SC) of rGO and H-rGO was calculated from CV curves, according to Equation 1: where ∫IdV is the area under the CV curve, m is the mass of the

Multiwalled carbon nanotube based aromatic volatile organic compound sensor: sensitivity enhancement through 1-hexadecanethiol functionalisation

• Nadra Bohli,
• Meryem Belkilani,
• Juan Casanova-Chafer,
• Eduard Llobet and
• Adnane Abdelghani

Beilstein J. Nanotechnol. 2019, 10, 2364–2373, doi:10.3762/bjnano.10.227

• presented in Supporting Information File 1 [16][17][18]. The MWCNTs were then dispersed in dimethylformamide (DMF) (0.1 mg MWCNTs in 1 mL of DMF) using an ultrasonic bath for 20 minutes at room temperature. Then, they were air-brush deposited over the platinum interdigitated electrode area of alumina

• 1011), operating at 100 kV. An Alpha FTIR spectrometer (Bruker, France) equipped with an ATR platinum crystal diamond module was used, in absorbance mode, to obtain the infrared spectra of the gold-decorated MWCNTs before and after the deposition of the SAM monolayer. This technique provides useful

Nontoxic pyrite iron sulfide nanocrystals as second electron acceptor in PTB7:PC₇₁BM-based organic photovoltaic cells

• Olivia Amargós-Reyes,
• José-Luis Maldonado,
• Omar Martínez-Alvarez,
• María-Elena Nicho,
• José Santos-Cruz,
• Juan Nicasio-Collazo,
• Irving Caballero-Quintana and
• Concepción Arenas-Arrocena

Beilstein J. Nanotechnol. 2019, 10, 2238–2250, doi:10.3762/bjnano.10.216

• a classical three-electrode electrolytic cell. The working electrode was an ITO electrode, the reference electrode was made of Ag+/Ag0 (0.01 M AgNO3/0.1 M tetrabutylammonium perchlorate in acetonitrile) and the counter electrode was made of platinum. All CV measurements were carried out in dry

Targeted therapeutic effect against the breast cancer cell line MCF-7 with a CuFe₂O₄/silica/cisplatin nanocomposite formulation

• B. Rabindran Jermy,
• Vijaya Ravinayagam,
• Widyan A. Alamoudi,
• Dana Almohazey,
• Hatim Dafalla,
• Lina Hussain Allehaibi,
• Abdulhadi Baykal,
• Muhammet S. Toprak and
• Thirunavukkarasu Somanathan

Beilstein J. Nanotechnol. 2019, 10, 2217–2228, doi:10.3762/bjnano.10.214

• structure (Figure 6a). Remarkably, after platinum adsorption, the CuFe2O4/HYPS sample showed an enhanced peak absorption up to 700 nm. A small absorption peak at about 224 nm showed the presence of tetrahedral coordinated Pt nanoclusters, while a significant enhancement of the absorption peak between 350

Ultrathin Ni_1−xCo_xS₂ nanoflakes as high energy density electrode materials for asymmetric supercapacitors

• Xiaoxiang Wang,
• Teng Wang,
• Rusen Zhou,
• Lijuan Fan,
• Shengli Zhang,
• Feng Yu,
• Tuquabo Tesfamichael,
• Liwei Su and
• Hongxia Wang

Beilstein J. Nanotechnol. 2019, 10, 2207–2216, doi:10.3762/bjnano.10.213

• , consisting of a working electrode, a counter electrode of platinum foil and a Hg/HgO reference electrode in 2 mol·L−1 potassium hydroxide aqueous electrolyte. The electrochemical characteristics of the synthesised material were measured using an electrochemical workstation (VSP, BioLogic Science Instruments

• residues, contributing to the continuous oxidation of Co2+ to Co3+ [37]. The electrochemical performance of the as-prepared oxide and sulfide materials was investigated by a three-electrode system at room temperature. A 1 × 1 cm2 sample of NiCoS@NF was used as the working electrode while a platinum foil

Gold-coated plant virus as computed tomography imaging contrast agent

• Alaa A. A. Aljabali,
• Mazhar S. Al Zoubi,
• Khalid M. Al-Batanyeh,
• Ali Al-Radaideh,
• Mohammad A. Obeid,
• Abeer Al Sharabi,
• Walhan Alshaer,
• Bayan AbuFares,
• Tasnim Al-Zanati,
• Murtaza M. Tambuwala,
• Naveed Akbar and
• David J. Evans

Beilstein J. Nanotechnol. 2019, 10, 1983–1993, doi:10.3762/bjnano.10.195

• contrast agents including gold nanoparticles (AuNPs) [13], bromine [14], platinum [15], ytterbium [16], gadolinium [4], and tungsten [15]. Many of the systems are made up of a core that is coated with a polymeric material such as liposomes [17], micelles [13], lipoproteins or polymeric nanoparticles [18

Charge-transfer interactions between fullerenes and a mesoporous tetrathiafulvalene-based metal–organic framework

• Manuel Souto,
• Joaquín Calbo,
• Samuel Mañas-Valero,
• Aron Walsh and
• Guillermo Mínguez Espallargas

Beilstein J. Nanotechnol. 2019, 10, 1883–1893, doi:10.3762/bjnano.10.183

• ]. Electrical measurements: Pressed pellets (F ≈ 5 US tons) were cut in rectangular shapes and contacted with silver conductive paint (RS 123-9911) and platinum wires (Goodfellow, 99.99%, 25 μm of diameter) in a four-probe configuration (Figure S2 and Figure S3, Supporting Information File 1). The geometrical

Tuning the performance of vanadium redox flow batteries by modifying the structural defects of the carbon felt electrode

• Ditty Dixon,
• Deepu Joseph Babu,
• Aiswarya Bhaskar,
• Hans-Michael Bruns,
• Joerg J. Schneider,
• Frieder Scheiba and
• Helmut Ehrenberg

Beilstein J. Nanotechnol. 2019, 10, 1698–1706, doi:10.3762/bjnano.10.165

• Reference 3000 instrument from Gamry with a Ag/AgCl reference electrode and a platinum mesh as a counter electrode. A modified configuration developed by Fink et al. was used as the setup for the working electrode (WE) [31]. The configuration was modified so that punched-out disks (Ø = 6 mm) of the felts

Kelvin probe force microscopy work function characterization of transition metal oxide crystals under ongoing reduction and oxidation

• Dominik Wrana,
• Karol Cieślik,
• Wojciech Belza,
• Christian Rodenbücher,
• Krzysztof Szot and
• Franciszek Krok

Beilstein J. Nanotechnol. 2019, 10, 1596–1607, doi:10.3762/bjnano.10.155

• results, we can set the limit of the smallest separation of oxide nanostructures at 15 nm to obtain any CPD difference. As for the CPD resolution, the estimated value would be below 5 meV, due to the high mechanical stability and good conductivity of both platinum silicide and PtIr-coated tips. Apart from

• -ContPt (PtIr-coated) and PtSi-FM (platinum silicide tips), both from Nanosensors. Such cantilevers are widely used as conducting tips in a contact mode AFM, allowing for a high lateral resolution in conductivity measurements. The remarkable mechanical stability of the selected cantilevers allowed for the

Materials nanoarchitectonics at two-dimensional liquid interfaces

• Katsuhiko Ariga,
• Michio Matsumoto,
• Taizo Mori and
• Lok Kumar Shrestha

Beilstein J. Nanotechnol. 2019, 10, 1559–1587, doi:10.3762/bjnano.10.153

• their lateral surface pressure at the air–water interface. The fabricated array structures of nanodisks can be also transferred to metal surfaces such as platinum surfaces. The examples demonstrated that the combination of rather ambiguous molecular interactions and transfer processes can create precise

• with platinum interdigitated electrodes. An excellent sensor capability for H2 gas in humid air at room temperature was observed for a film of 10 layers of the aligned one-dimensional W18O49 nanowires. Various additional techniques to fabricate two-dimensional structures have been proposed. Advincula

Flexible freestanding MoS₂-based composite paper for energy conversion and storage

• Florian Zoller,
• Jan Luxa,
• Thomas Bein,
• Dina Fattakhova-Rohlfing,
• Daniel Bouša and
• Zdeněk Sofer

Beilstein J. Nanotechnol. 2019, 10, 1488–1496, doi:10.3762/bjnano.10.147

• materials [26]. Another popular related field in the context of energy storage and sustainable energy production is water splitting to produce hydrogen. The best catalysts for the hydrogen evolution reaction (HER) are unequivocally based on platinum and iridium, however the scarcity and the high cost of

• voltage range of 0.01–3.0 V vs Li/Li+. Supercapacitors A disk with diameter of 14 mm was cut from the vacuum-assembled MoS2-based composite paper material. Then it was placed into an electrochemical holder (InRedox, USA) which was placed in the middle of platinum basket (counter electrode). A saturated