Methodologies for the synthesis of quaternary carbon centers via hydroalkylation of unactivated olefins: twenty years of advances

• Thiago S. Silva and
• Fernando Coelho

Beilstein J. Org. Chem. 2021, 17, 1565–1590, doi:10.3762/bjoc.17.112

• suggested that iridium serves as a π-Lewis acid (although one could propose a C–H activation pathway) that activates the olefin by coordination due to the correlation observed between the nature of the Ir counterion and the reaction yields. Radical-based approaches Olefin hydroalkylation via metal hydride

Recent developments in enantioselective photocatalysis

• Callum Prentice,
• James Morrisson,
• Andrew D. Smith and
• Eli Zysman-Colman

Beilstein J. Org. Chem. 2020, 16, 2363–2441, doi:10.3762/bjoc.16.197

Photosensitized direct C–H fluorination and trifluoromethylation in organic synthesis

• Shahboz Yakubov and
• Joshua P. Barham

Beilstein J. Org. Chem. 2020, 16, 2151–2192, doi:10.3762/bjoc.16.183

• reactions. Keywords: C–H activation; energy transfer; fluorination; photocatalysis; photosensitization; visible light; Review 1 Introduction 1.1 Importance of direct C–H fluorination/trifluoromethylation and photosensitization in organic synthesis 1.1.1 Importance of fluorine atoms in organic molecules

• ][119][120][121][122]. There are many approaches to photosensitized fluorination that do not involve direct C–H activation, which are reviewed elsewhere [123][124][125], such as C–C bond fragmentation/C–F bond formation [126], aminofluorination of cyclopropanes [127] and decarboxylative fluorination

When metal-catalyzed C–H functionalization meets visible-light photocatalysis

• Lucas Guillemard and
• Joanna Wencel-Delord

Beilstein J. Org. Chem. 2020, 16, 1754–1804, doi:10.3762/bjoc.16.147

• catalytic system is extremely appealing. In that perspective, the scope of this review aims to present innovative reactions combining C–H activation and visible-light induced photocatalysis. Keywords: C–H activation; C–H functionalization; dual catalysis; photoredox catalysis; radical chemistry

• –H activations, visible-light-induced photocatalysis, electrosynthesis, enzyme catalysis, and others. Each of these techniques aims at accessing complex molecules while limiting ecological footprint. Over the last decade, the metal-catalyzed C–H activation established itself as one of the most

• previously inaccessible molecules could be expected. C–H activation reactions, generally do not change the oxidation state of the metal and are favored in the case of aromatic or vinylic substrates but are clearly more challenging when using aliphatic precursors [21][22][23][24][25][26][27][28]. In parallel

In silico rationalisation of selectivity and reactivity in Pd-catalysed C–H activation reactions

• Liwei Cao,
• Mikhail Kabeshov,
• Steven V. Ley and
• Alexei A. Lapkin

Beilstein J. Org. Chem. 2020, 16, 1465–1475, doi:10.3762/bjoc.16.122

• intermediates of palladium-catalysed carbon–hydrogen (C–H) activation reactions as well as to predict the final products. Implemented as a high-performance computing cluster tool, it has been shown to correctly choose the mechanism and rationalise regioselectivity of chosen examples from open literature reports

• . The developed methodology is capable of predicting reactivity of various substrates by differentiation between two major mechanisms – proton abstraction and electrophilic aromatic substitution. An attempt has been made to predict new C–H activation reactions. This methodology can also be used for the

• automated reaction planning, as well as a starting point for microkinetic modelling. Keywords: C–H activation; density functional theory; reaction prediction; Introduction Periodically, our knowledge of chemistry is enriched with new transformations that provide significant breakthroughs by enabling new

Synthesis of esters of diaminotruxillic bis-amino acids by Pd-mediated photocycloaddition of analogs of the Kaede protein chromophore

• Esteban P. Urriolabeitia,
• Pablo Sánchez,
• Alexandra Pop,
• Cristian Silvestru,
• Eduardo Laga,
• Ana I. Jiménez and
• Carlos Cativiela

Beilstein J. Org. Chem. 2020, 16, 1111–1123, doi:10.3762/bjoc.16.98

• complexes 4. Treatment of 4 with CO in a MeOH/NCMe mixture promoted the methoxycarbonylation of the palladated carbon and the release of the corresponding ortho-functionalized 1,3-diaminotruxillic bis-amino esters 5 as single isomers. Keywords: amino acids; C–H activation; Kaede protein; oxazolones

• a very complex mixture was obtained and a pure compound could not be isolated. Complexes 3 were obtained as air- and moisture-stable solids in good yields (see Experimental and Supporting Information File 1). In general, the yields were higher than 85%, which shows that the C–H activation is a

• is remarkable that the C–H activation allows in this case scale-up of the reaction without a loss of yield. For oxazolone 2h the reaction was carried out using 4.3 mmol of starting material and the final yield of analytically pure 3h was 94% (see Experimental). The characterization of complexes 3

Bipyrrole boomerangs via Pd-mediated tandem cyclization–oxygenation. Controlling reaction selectivity and electronic properties

• Liliia Moshniaha,
• Marika Żyła-Karwowska,
• Joanna Cybińska,
• Piotr J. Chmielewski,
• Ludovic Favereau and
• Marcin Stępień

Beilstein J. Org. Chem. 2020, 16, 895–903, doi:10.3762/bjoc.16.81

• materials, this strategy has so far remained relatively unexplored [27]. As a part of our ongoing research on π-extended electron-deficient oligopyrroles [13][28][29][30][31], we have recently reported that Pd(II)-mediated double C–H activation can be a useful tool for conversion of 1,n-dipyrrolylalkanes

Aldehydes as powerful initiators for photochemical transformations

• Maria A. Theodoropoulou,
• Nikolaos F. Nikitas and
• Christoforos G. Kokotos

Beilstein J. Org. Chem. 2020, 16, 833–857, doi:10.3762/bjoc.16.76

• ., formamide) and ethers through C–H activation using various five- and six-membered heteroarenes (e.g., benzothiazole) and employing benzaldehyde (8) as the photoinitiator [56]. This protocol was compatible with both C(sp3)–H activation (N-alkyl C–H bonds of amides or Cα–H bonds of ethers) and C(sp2)–H

Regioselectively α- and β-alkynylated BODIPY dyes via gold(I)-catalyzed direct C–H functionalization and their photophysical properties

• Takahide Shimada,
• Shigeki Mori,
• Masatoshi Ishida and
• Hiroyuki Furuta

Beilstein J. Org. Chem. 2020, 16, 587–595, doi:10.3762/bjoc.16.53

• presence of zinc(II) triflate as an activator of TIPS-EBX at 100 °C [41]. In contrast to the reaction of dipyrromethane 2, the double C–H activation at the 2,6-positions of 1a required harsh conditions (Table S1, Supporting Information File 1). The representative procedure of the reaction with EBX/gold(I

Synthesis of triphenylene-fused phosphole oxides via C–H functionalizations

• Md. Shafiqur Rahman and
• Naohiko Yoshikai

Beilstein J. Org. Chem. 2020, 16, 524–529, doi:10.3762/bjoc.16.48

• through two distinct C–H functionalization reactions as key steps. The phosphole ring was constructed by a three-component coupling of 3-(methoxymethoxy)phenylzinc chloride, an alkyne, and dichlorophenylphosphine, involving the regioselective C–H activation of the C2 position of the arylzinc intermediate

• the key C–H activation step, i.e., 1,4-cobalt migration in the alkenylcobalt intermediate [29]. The oxidation of the benzo[b]phosphole phosphorous atom and cleavage of the MOM group took place simultaneously, and thus afforded compound 3 in 33% yield on a 5 mmol scale [16]. Compound 3 was then

• phosphole oxides through C–H functionalization and cross-coupling reactions. The phosphole ring was constructed in the early stage of the synthesis by a three-component assembly method featuring a 1,4-cobalt migration as the key step. Unlike other C–H activation/alkyne annulation approaches to benzo[b

Synthesis and circularly polarized luminescence properties of BINOL-derived bisbenzofuro[2,3-b:3’,2’-e]pyridines (BBZFPys)

• Ryo Takishima,
• Yuji Nishii,
• Tomoaki Hinoue,
• Yoshitane Imai and
• Masahiro Miura

Beilstein J. Org. Chem. 2020, 16, 325–336, doi:10.3762/bjoc.16.32

• characteristics in the solid state. The crystal structures of the coupling products were also evaluated by single crystal X-ray analysis and the well-ordered intermolecular stacking arrangements appeared to be responsible for the enhanced CPL. Keywords: BINOL; C–H activation; circularly polarized luminescence

Recent developments in photoredox-catalyzed remote ortho and para C–H bond functionalizations

• Rafia Siddiqui and
• Rashid Ali

Beilstein J. Org. Chem. 2020, 16, 248–280, doi:10.3762/bjoc.16.26

• catalyst 16. In a semiconductor, the band gap is referred to as the difference in energy between the upper valence band and the lower conduction band. Upon irradiation, the electron holes in the band gap accept the electrons from the reduced moieties, thereby generating the C–H activation catalyst. In

• ]. From mechanistic studies it can be inferred that the photoredox catalysis process is independent from the C–H activation process. They also successfully demonstrated the importance of a photoredox catalysts in the generation of superoxide radicals. On the other hand, recently, Xiong and co-workers

Synthesis of 3-alkenylindoles through regioselective C–H alkenylation of indoles by a ruthenium nanocatalyst

• Abhijit Paul,
• Debnath Chatterjee,
• Srirupa Banerjee and
• Somnath Yadav

Beilstein J. Org. Chem. 2020, 16, 140–148, doi:10.3762/bjoc.16.16

• on the surface are responsible for the high catalytic efficiency of the Ru nanocatalyst. Keywords: alkenylation; C–H activation; heterogeneous catalysis; nanocatalysis; ruthenium catalysis; Introduction The synthesis of functionalised indole ring systems has received significant attention over the

• Pd-catalysed Fujiwara–Moritani or oxidative dehydrogenative Heck reaction via dual C–H activation [21][22][23][24]. One of the early examples of this reaction, reported by Gaunt and co-workers, involved the regioselective, solvent-controlled C3 alkenylation of indoles with alkenes containing electron

• alkenylation of indole with n-butylacrylate in the presence of thioether ligands [32]. In the context of C–H activation reactions, the catalyst of choice has mostly been Pd [33][34]. However, as part of the search for newer and more cost-efficient catalysts, other transition metals, such as Ru, have also been

Synthesis and characterization of bis(4-amino-2-bromo-6-methoxy)azobenzene derivatives

• David Martínez-López,
• Amirhossein Babalhavaeji,
• Diego Sampedro and
• G. Andrew Woolley

Beilstein J. Org. Chem. 2019, 15, 3000–3008, doi:10.3762/bjoc.15.296

• substituent in an attempt to enhance water solubility. Late-stage functionalization of the ortho-position was carried out through a palladium(II)-catalyzed C–H activation, resulting in ortho-brominated azobenzenes [21]. Photochemical characterization Despite the morpholino substituent, compound 4 was found to

Combining the Ugi-azide multicomponent reaction and rhodium(III)-catalyzed annulation for the synthesis of tetrazole-isoquinolone/pyridone hybrids

• Gerardo M. Ojeda,
• Prabhat Ranjan,
• Pavel Fedoseev,
• Lisandra Amable,
• Upendra K. Sharma,
• Daniel G. Rivera and
• Erik V. Van der Eycken

Beilstein J. Org. Chem. 2019, 15, 2447–2457, doi:10.3762/bjoc.15.237

• . Keywords: C–H activation; cyclization; isoquinolone; multicomponent reaction; tetrazole; Introduction Pyridones and isoquinolones are relevant heterocyclic scaffolds present in numerous bioactive compounds and natural products [1][2][3][4]. Similarly, molecules containing a tetrazole ring exhibit a wide

• could form isoquinolones and pyridones linked to a tetrazole ring, since such class of hybrid compounds is not described in the literature. Several protocols based on C–H activation or metal-catalyzed cyclizations are known to generate the isoquinolone and pyridone moieties and further assist their post

• regioselectivity, can be overcome when a suitable directing group assists the reaction [46][47]. Traditional directing groups for C–H activation include amide, hydroxamide, carboxylate, pyridyl, quinolyl, carbonyl, ether, hydroxy, oxazolinyl and cyano [47]. For example, Ackermann et al. reported a Ru(II)-catalyzed

Mono- and bithiophene-substituted diarylethene photoswitches with emissive open or closed forms

• A. Lennart Schleper,
• Mariano L. Bossi,
• Vladimir N. Belov and
• Stefan W. Hell

Beilstein J. Org. Chem. 2019, 15, 2344–2354, doi:10.3762/bjoc.15.227

• towards asymmetric DAEs. The thiophene- and bithiopheneboronic esters 9 and 12 were prepared as shown in Scheme 2. C–H activation of methyl thiophene-2-carboxylate in position 5 was achieved by using a bis(1,5-cyclooctadiene)di-μ-methoxydiiridium(I) catalyst with 4,4’-di-tert-butyl-2,2’-dipyridyl as

Recent advances in transition-metal-catalyzed incorporation of fluorine-containing groups

• Xiaowei Li,
• Xiaolin Shi,
• Xiangqian Li and
• Dayong Shi

Beilstein J. Org. Chem. 2019, 15, 2213–2270, doi:10.3762/bjoc.15.218

• NFSI to give the highly reactive species F–Pd(IV)1a)2-N(SO2Ph)2 (C), which produces the product 2a and reductive elimination intermediate 1a-Pd(II)-N(SO2Ph)2 (D). Finally, intermediate A regenerates from intermediate D by aid of the catalytic amount of HNO3 released during the C–H activation step. In

• the C–H activation event to the trifluoromethylated products, as described in Scheme 63. In this case, the specific catalytic mechanism remains to be studied. In 2011, the group of Liu [123] accomplished a Pd(II)-catalyzed oxidative trifluoromethylation of indoles with TMSCF3 and PhI(OAc)2 at room

Attempted synthesis of a meta-metalated calix[4]arene

• Christopher D. Jurisch and
• Gareth E. Arnott

Beilstein J. Org. Chem. 2019, 15, 1996–2002, doi:10.3762/bjoc.15.195

• strategy involved using a mesoionic carbene to direct C–H activation, but proved to form an unexpectedly unstable intermediate that was identified through high-resolution mass spectrometry. On route to our target, a new optimized method to mononitrocalix[4]arenes was developed, including optimized and high

• ] (see Figure 1), although two unusual methods have also been reported [16][17]. We have been looking at alternative methods for the meta-functionalization of calix[4]arenes, with the idea of C–H activation via transition metals appearing an attractive option. Lhoták and co-workers have already attempted

• this using a pyridyl sulfoxide directing group and palladium as the metal, but in this case the palladium caused a double C–H activation and formed an impressive bridge to the adjacent calix[4]arene aromatic ring [14]. The question for us was whether this bridge formation was a general principle or

Recent advances on the transition-metal-catalyzed synthesis of imidazopyridines: an updated coverage

• Gagandeep Kour Reen,
• Ashok Kumar and
• Pratibha Sharma

Beilstein J. Org. Chem. 2019, 15, 1612–1704, doi:10.3762/bjoc.15.165

• reactions, C–H activation/functionalization and coupling reactions are highlighted in this review article. The basic illustration of this review comprises of schemes with concise account of explanatory text. The schemes depict the reaction conditions along with a quick look into the mechanism involved to

• development and (ii) for the modifications needed thereof in the R&D sector. Keywords: C–H activation/functionalization; coupling reactions; imidazopyridines; multicomponent reactions; transition metal catalysis; Introduction The structural diversity and biological importance of nitrogen-containing

• greener oxidants [33]. During the writing of this review, we came across some reviews on IPs, however, their coverage is limited to the imidazo[1,2-a]pyridine nucleus deriving from either a particular starting material or to one type of reaction procedure (particularly C–H activation) with literature up

Mechanochemistry of supramolecules

• Anima Bose and
• Prasenjit Mal

Beilstein J. Org. Chem. 2019, 15, 881–900, doi:10.3762/bjoc.15.86

• acetic acid (for liquid-assisted grinding, LAG) led to the regioselective C–H activation (Figure 5) [58]. In 2008, the mechanochemical synthesis of both [2]- and [4]rotaxanes was reported by Chiu and co-workers. The reactions led to high yields of the products 12 and 13 under solvent-free conditions at a

Solid-phase synthesis of biaryl bicyclic peptides containing a 3-aryltyrosine or a 4-arylphenylalanine moiety

• Iteng Ng-Choi,
• Àngel Oliveras,
• Lidia Feliu and
• Marta Planas

Beilstein J. Org. Chem. 2019, 15, 761–768, doi:10.3762/bjoc.15.72

• cross-coupling reaction [15][16][17][18][19] or via a Pd-catalyzed C–H activation reaction [20][21]. We have used the former reaction for the solid-phase preparation of biaryl cyclic peptides bearing a Phe-Phe, a Phe-Tyr or a Tyr-Tyr linkage [22][23]. Our approach involved the synthesis of the linear

Synthesis of the aglycon of scorzodihydrostilbenes B and D

• Katja Weimann and
• Manfred Braun

Beilstein J. Org. Chem. 2019, 15, 610–616, doi:10.3762/bjoc.15.56

• , among them the aglycon of scorzodihydrostilbenes B and D. Keywords: C–H activation; hydroarylation; phenols; regioselectivity; ruthenium; Introduction Among phytochemicals with strong allelopathic effects, various natural products are found that feature the structural motif of dihydrostilbene with

• this article, we describe a synthetic approach that takes advantage of a regioselective, ruthenium-catalyzed C–H activation [6] and makes accessible not only the skeleton of dihydrostilbenes with multiple phenolic ether functionality but also the aglycon of scorzodihydrostilbenes B and D (2 and 4, R1

Intramolecular cascade annulation triggered by rhodium(III)-catalyzed sequential C(sp²)–H activation and C(sp³)–H amination

• Liangliang Song,
• Guilong Tian,
• Johan Van der Eycken and
• Erik V. Van der Eycken

Beilstein J. Org. Chem. 2019, 15, 571–576, doi:10.3762/bjoc.15.52

• -hydroxyacrylamides for the construction of indolizinones via sequential C(sp2)–H activation and C(sp3)–H amination has been developed. This approach shows excellent functional-group tolerance. The synthesized scaffold forms the core of many natural products with pharmacological relevance. Keywords: annulation; C–H

• activation; rhodium; acrylamide; heterocycles; Introduction Over the last decade, transition metal-catalyzed C(sp2)–H activation has emerged as an efficient strategy to access complex molecules [1][2][3][4][5][6]. Among the methodologies, RhIII-catalyzed oxidative annulation of a C(sp2)–H bond with 2π

A novel and efficient synthesis of phenanthrene derivatives via palladium/norbornadiene-catalyzed domino one-pot reaction

• Yue Zhong,
• Wen-Yu Wu,
• Shao-Peng Yu,
• Tian-Yuan Fan,
• Hai-Tao Yu,
• Nian-Guang Li,
• Zhi-Hao Shi,
• Yu-Ping Tang and
• Jin-Ao Duan

Beilstein J. Org. Chem. 2019, 15, 291–298, doi:10.3762/bjoc.15.26

• palladium-catalyzed reaction that results in phenanthrene derivatives using aryl iodides, ortho-bromobenzoyl chlorides and norbornadiene in one pot. This dramatic transformation undergoes ortho-C–H activation, decarbonylation and subsequent a retro-Diels–Alder process. Pleasantly, this protocol has a wider

• substrate range, shorter reaction times and higher yields of products than previously reported methods. Keywords: C–H activation; norbornadiene; palladium; phenanthrene derivatives; Introduction Phenanthrene is a polycyclic aromatic hydrocarbon which contains three benzene rings. The phenanthrenes can be

• is presented in Scheme 5. As is commonly considered, the aryl-PdII complex A is formed by oxidative addition of aryl iodide to the Pd0 complex, which is followed by the insertion of norbornadiene to the C–Pd bond of A to produce B. Then, an ortho-C–H activation reaction occurs to B, which offers

Oxidative radical ring-opening/cyclization of cyclopropane derivatives

• Yu Liu,
• Qiao-Lin Wang,
• Zan Chen,
• Cong-Shan Zhou,
• Bi-Quan Xiong,
• Pan-Liang Zhang,
• Chang-An Yang and
• Quan Zhou

Beilstein J. Org. Chem. 2019, 15, 256–278, doi:10.3762/bjoc.15.23

• the synthesis of carbonyl-containing alkyl-substituted heteroarenes 102 or 104 under mild conditions in moderate to good yields with good functional group tolerance (Scheme 22) [100]. This reaction went through a selective C(sp3)–C(sp3) bond cleavage, C–H activation and C(sp3)–C(sp2) bond formation