The enzymes of microbial nicotine metabolism

• Paul F. Fitzpatrick

Beilstein J. Org. Chem. 2018, 14, 2295–2307, doi:10.3762/bjoc.14.204

• )-nicotine (L-nicotine) is found at high levels in tobacco leaves and the waste from tobacco processing. The resulting interest in developing environmentally friendly methods of degrading nicotine has driven studies of microbial pathways for metabolizing the compound, with the possible additional benefit of

Applications of organocatalysed visible-light photoredox reactions for medicinal chemistry

• Michael K. Bogdos,
• Emmanuel Pinard and
• John A. Murphy

Beilstein J. Org. Chem. 2018, 14, 2035–2064, doi:10.3762/bjoc.14.179

• , scalable and environmentally friendly reaction conditions than the traditional methods employed for making these highly substituted heteroaromatics. Access to the saturated oxazolines and thaziolines from amides and thioamides, respectively, has been described by Nicewicz who used acridinium salt

Water-soluble SNS cationic palladium(II) complexes and their Suzuki–Miyaura cross-coupling reactions in aqueous medium

• Alphonse Fiebor,
• Richard Tia,
• Banothile C. E. Makhubela and
• Henok H. Kinfe

Beilstein J. Org. Chem. 2018, 14, 1859–1870, doi:10.3762/bjoc.14.160

• solvents in the presence of an excess of base [1][2][3]. With the drive for the development of environmentally friendly and low cost protocols, a number of methodologies for the Suzuki–Miyaura reaction under aqueous conditions or in neat water have been reported [4][5][6]. This has been achieved via

Heterogeneous acidic catalysts for the tetrahydropyranylation of alcohols and phenols in green ethereal solvents

• Ugo Azzena,
• Massimo Carraro,
• Gloria Modugno,
• Luisa Pisano and
• Luigi Urtis

Beilstein J. Org. Chem. 2018, 14, 1655–1659, doi:10.3762/bjoc.14.141

• toxicities and are considered negative for genotoxicity and mutagenicity [26][27][28]. Due to these environmentally friendly characteristics, CPME and 2-MeTHF appear as versatile green alternatives to ethereal solvents such as tetrahydrofuran, dioxane, diethyl ether or methyl tert-butyl ether. Aiming to the

• development of a particularly practical and environmentally friendly procedure to the generation of THP ethers, we devoted our efforts to the employment of heterogeneous acidic catalysts [29][30] in order to set up conditions allowing easy processing of the reaction mixtures and, possibly, the recovery and

A survey of chiral hypervalent iodine reagents in asymmetric synthesis

• Soumen Ghosh,
• Suman Pradhan and
• Indranil Chatterjee

Beilstein J. Org. Chem. 2018, 14, 1244–1262, doi:10.3762/bjoc.14.107

• environmentally friendly, mild and economic reagents have been used in catalytic or stoichiometric amounts as an alternative to transition metals for delivering enantioenriched molecules. Varieties of different chiral reagents and their use for demanding asymmetric transformations have been documented over the

• challenging and application-oriented conversions that can be applied for the total synthesis of natural products as well as in industry related to pharmaceutical and medicinal chemistry. These environmentally friendly, cheap and readily available reagents will surely attract the attention of scientists

Hypervalent iodine(III)-mediated decarboxylative acetoxylation at tertiary and benzylic carbon centers

• Kensuke Kiyokawa,
• Daichi Okumatsu and
• Satoshi Minakata

Beilstein J. Org. Chem. 2018, 14, 1046–1050, doi:10.3762/bjoc.14.92

• operation, and the use of readily available and environmentally friendly oxidants. However, despite the great potential of this approach with respect to a decarboxylative C–O bond-forming reaction, the oxidation system was only applied to reactions of uronic acids and α-amino acids [22][23][24], and further

Electrochemically modified Corey–Fuchs reaction for the synthesis of arylalkynes. The case of 2-(2,2-dibromovinyl)naphthalene

• Fabiana Pandolfi,
• Isabella Chiarotto and
• Marta Feroci

Beilstein J. Org. Chem. 2018, 14, 891–899, doi:10.3762/bjoc.14.76

• conditions and in the absence of reducing agents or bases in the reaction mixture. Electrochemical methods can be considered an environmentally friendly technique: they rely on the use of practically massless electrons (which are not converted to byproducts) instead of stoichiometric amounts of redox

Electrochemical Corey–Winter reaction. Reduction of thiocarbonates in aqueous methanol media and application to the synthesis of a naturally occurring α-pyrone

• Ernesto Emmanuel López-López,
• José Alvano Pérez-Bautista,
• Fernando Sartillo-Piscil and
• Bernardo A. Frontana-Uribe

Beilstein J. Org. Chem. 2018, 14, 547–552, doi:10.3762/bjoc.14.41

• more environmentally friendly than the classical reaction, where a large excess of trialkyl phosphite as reducing agent and high temperatures are required. Thus, cathodic reduction at room temperature of two cyclic thiocarbonates (−1.2 to −1.4 V vs Ag/AgCl) afforded the corresponding alkenes, trans-6

• /AcONa buffer 0.5 M as electrolytic media. We term this transformation as the “Electrochemical Corey–Winter (ECW) reaction”. This new environmentally friendly process was used to synthetize a metabolite isolated from Trichoderma viride in high yield. Alkenes and α,β-unsaturated ester functionalities are

Functionalization of N-arylglycine esters: electrocatalytic access to C–C bonds mediated by n-Bu₄NI

• Mi-Hai Luo,
• Yang-Ye Jiang,
• Kun Xu,
• Yong-Guo Liu,
• Bao-Guo Sun and
• Cheng-Chu Zeng

Beilstein J. Org. Chem. 2018, 14, 499–505, doi:10.3762/bjoc.14.35

• the presence of excess amounts of oxidant. On the other hand, the toxicity of residual traces of transition metal (photo)catalyst in products is also highly concerned. Consequently, metal-free and environmentally friendly oxidative C–C bond formation is highly desired. Electrochemistry has proved to

Progress in copper-catalyzed trifluoromethylation

• Guan-bao Li,
• Chao Zhang,
• Chun Song and
• Yu-dao Ma

Beilstein J. Org. Chem. 2018, 14, 155–181, doi:10.3762/bjoc.14.11

• all components in air, the environmentally friendly nature, and the recycling of the aqueous medium. Subsequently, the group of Li and Duan [58] reported an efficient method for the synthesis of α-trifluoromethyl ketones via addition of CF3 to aryl(heteroaryl)enol acetates using readily available

Exploring mechanochemistry to turn organic bio-relevant molecules into metal-organic frameworks: a short review

• Vânia André,
• Sílvia Quaresma,
• João Luís Ferreira da Silva and
• M. Teresa Duarte

Beilstein J. Org. Chem. 2017, 13, 2416–2427, doi:10.3762/bjoc.13.239

• Vania Andre Silvia Quaresma Joao Luis Ferreira da Silva M. Teresa Duarte Centro de Química Estrutural, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisbon, Portugal 10.3762/bjoc.13.239 Abstract Mechanochemistry is a powerful and environmentally friendly synthetic

• and solvent. It is an approach to green chemistry, an area devoted to the discovery of environmentally friendly synthetic pathways, eliminating or drastically reducing the amount of solvent necessary to catalytically promote reactions. Mechanochemistry consists of grinding together two or more

• (linker), or by encapsulation (guest). Mechanochemistry has proved to be an efficient, high performance, environmentally friendly, cleaner, and faster synthetic procedure, leading to significantly lower costs of production. There is still much to explore in the combination of BioMOFs with mechanochemistry

The effect of milling frequency on a mechanochemical organic reaction monitored by in situ Raman spectroscopy

• Patrick A. Julien,
• Ivani Malvestiti and
• Tomislav Friščić

Beilstein J. Org. Chem. 2017, 13, 2160–2168, doi:10.3762/bjoc.13.216

• ] has rendered mechanochemical reactions by ball milling or grinding as viable, highly environmentally-friendly alternatives to solution-based chemistry. Importantly, mechanochemistry provides not only a means to conduct chemical transformations of poorly soluble reagents [17], but also enables access

Superstructures with cyclodextrins: Chemistry and applications IV

• Gerhard Wenz

Beilstein J. Org. Chem. 2017, 13, 2157–2159, doi:10.3762/bjoc.13.215

• with gold salts, such as KAuBr4, which readily crystallize as fine needles [10]. Based on this finding, a new and environmentally friendly recovery process for gold from excavation material is under development. Significant progress was achieved in the functionalization of CDs through the

New bio-nanocomposites based on iron oxides and polysaccharides applied to oxidation and alkylation reactions

• Daily Rodríguez-Padrón,
• Alina M. Balu,
• Antonio A. Romero and
• Rafael Luque

Beilstein J. Org. Chem. 2017, 13, 1982–1993, doi:10.3762/bjoc.13.194

• over the use of catalysts in a homogeneous phase due to the difficulty in separation and recovery of the latter. Heterogeneous catalytic systems, as a priority of research activity in the field of green chemistry, open up new possibilities for further development of environmentally friendly, catalyzed

• most advantageous and environmentally friendly alternatives compared to the traditional routes [5][23]. This novel approach offers the possibility of a solvent-free process, avoiding environmental problems related to toxicity and the use thereof [24][25]. Moreover, the mechanochemical protocols have

• these catalysts as potential candidates in both the selective oxidation of benzyl alcohol and alkylation of toluene with benzyl chloride. Experimental Synthesis of bio-nanocomposites based on iron oxide and polysaccharide S4 A simple, reproducible and environmentally friendly protocol has been developed

Solvent-free and room temperature synthesis of 3-arylquinolines from different anilines and styrene oxide in the presence of Al₂O₃/MeSO₃H

• Hashem Sharghi,
• Mahdi Aberi,
• Mohsen Khataminejad and
• Pezhman Shiri

Beilstein J. Org. Chem. 2017, 13, 1977–1981, doi:10.3762/bjoc.13.193

• Hashem Sharghi Mahdi Aberi Mohsen Khataminejad Pezhman Shiri Department of Chemistry, Shiraz University, Shiraz, 71454, I. R. Iran, Tel.: +98 711 2284822; Fax: +98 711 2280926 10.3762/bjoc.13.193 Abstract A highly efficient, simple and environmentally friendly synthesis of 3-arylquinolines has

Mechanochemical synthesis of small organic molecules

• Tapas Kumar Achar,
• Anima Bose and
• Prasenjit Mal

Beilstein J. Org. Chem. 2017, 13, 1907–1931, doi:10.3762/bjoc.13.186

• known solution-based synthetic procedures more environmentally friendly by avoiding the solvent which is also one of the major drawbacks. So development of innovative bond formation reactions under mechanomilling should be highly appreciated that are inaccessible from solution phase chemistry

Mechanochemical synthesis of thioureas, ureas and guanidines

• Vjekoslav Štrukil

Beilstein J. Org. Chem. 2017, 13, 1828–1849, doi:10.3762/bjoc.13.178

• Warner have proposed 12 Principles of Green Chemistry as a guide to help making chemical processes more environmentally friendly [13][14]. Many of the requirements contained in these principles (e.g., prevention, atom economy, energy efficiency, catalysis, safe synthesis) can be met if the reactions are

• reactions in an environmentally-friendly fashion [17][18]. In this respect, there have been several turning points in the development of solid-state mechanochemistry. The first key discovery was made by Jones et al. who discovered the rate-accelerating effect of adding small catalytic quantities of a liquid

• corresponding saccharyl ureas 44a–d were isolated in high yields after CuCl-catalyzed (10 mol %) LAG for 2 hours (Scheme 19). These several examples of sulfonylureas nicely demonstrate that ball milling is also a very powerful environmentally-friendly synthetic tool in medicinal chemistry. Mechanochemical

Mechanochemical N-alkylation of imides

• Anamarija Briš,
• Mateja Đud and
• Davor Margetić

Beilstein J. Org. Chem. 2017, 13, 1745–1752, doi:10.3762/bjoc.13.169

• synthesis of amines by their reaction with 1,2-diaminoethane. Keywords: ball milling; Gabriel reaction; imides; mechanochemistry; N-alkylation; Introduction The development of environmentally friendly organic reactions is a growing area of interest [1]. The reduction of the impact of chemical reactions on

• a precedence in the application of weaker base in mechanochemical synthesis of triphenylphosphoranes [32]. Often DMF is used as solvent in imide alkylation reactions, which promotes SN2 reactions [33] and its low volatility is advantageous over more environmentally friendly solvents which might be

An effective Pd nanocatalyst in aqueous media: stilbene synthesis by Mizoroki–Heck coupling reaction under microwave irradiation

• Carolina S. García,
• Paula M. Uberman and
• Sandra E. Martín

Beilstein J. Org. Chem. 2017, 13, 1717–1727, doi:10.3762/bjoc.13.166

• an economic and environmental standpoint, it is highly desirable to develop more environmentally friendly synthetic methodologies. Several studies were dedicated to the design of a novel catalytic system, that are more accessible, robust, efficient and ligand-free [19]. In that sense, nanoparticles

• Wittig reaction followed by different metal-catalyzed reactions and harsh conditions are usually required [60][61][62]. In our case, the desired product was obtained under environmentally friendly reaction conditions and in a short reaction time. Thus, the PVP-Pd NPs proved to be an effective catalyst to

• modified, and probably this structure is responsible for the activity since it leaves enough surface available to perform the catalytic reaction. Conclusion In summary, the PVP-Pd NPs exhibit an outstanding catalytic activity in the Mizoroki–Heck reaction under environmentally friendly reaction conditions

Sustainable synthesis of 3-substituted phthalides via a catalytic one-pot cascade strategy from 2-formylbenzoic acid with β-keto acids in glycerol

• Lina Jia and
• Fuzhong Han

Beilstein J. Org. Chem. 2017, 13, 1425–1429, doi:10.3762/bjoc.13.139

• , as an environmentally friendly reaction medium, has received increasing interest for organic reactions because of its peculiar physical and chemical properties such as polarity, low toxicity, biodegradability, high boiling point, and ready availability from renewable feed stocks [31]. Many organic

One-pot synthesis of block-copolyrotaxanes through controlled rotaxa-polymerization

• Jessica Hilschmann,
• Gerhard Wenz and
• Gergely Kali

Beilstein J. Org. Chem. 2017, 13, 1310–1315, doi:10.3762/bjoc.13.127

• dethreading already takes place. This multistep reaction methodology hinders the large-scale production and broad application of these materials. Recently our group has developed a method for a simple and environmentally friendly synthesis of polyrotaxanes. This, so called rotaxa-polymerization, is an aqueous

Strategies toward protecting group-free glycosylation through selective activation of the anomeric center

• A. Michael Downey and
• Michal Hocek

Beilstein J. Org. Chem. 2017, 13, 1239–1279, doi:10.3762/bjoc.13.123

Chemoselective synthesis of diaryl disulfides via a visible light-mediated coupling of arenediazonium tetrafluoroborates and CS₂

• Jing Leng,
• Shi-Meng Wang and
• Hua-Li Qin

Beilstein J. Org. Chem. 2017, 13, 903–909, doi:10.3762/bjoc.13.91

• visible light-promoted coupling of readily accessible arenediazonium tetrafluoroborates and CS2. This practical and convenient protocol provides a direct pathway for the assembly of a series of disulfides in an environmentally friendly manner with good to excellent yields. Keywords: arenediazonium

• has also been studied [14][15] by taking advantage of visible light as abundant and environmentally friendly energy source for organic syntheses. The photochemistry of diazonium salts has been widely studied since the early 19th century, at which time, it was noticed that benzenediazonium nitrate

Opportunities and challenges for the sustainable production of structurally complex diterpenoids in recombinant microbial systems

• Katarina Kemper,
• Max Hirte,
• Markus Reinbold,
• Monika Fuchs and
• Thomas Brück

Beilstein J. Org. Chem. 2017, 13, 845–854, doi:10.3762/bjoc.13.85

• inaccessible. A good example is the mutagenesis of the bacterial diterpene synthase CotB2 that resulted in dolabellatriene-type scaffolds, which were by then mostly found in marine organisms [59]. To that end, these new routes can provide substantial and environmentally friendly alternatives for sourcing

Continuous-flow processes for the catalytic partial hydrogenation reaction of alkynes

• Carmen Moreno-Marrodan,
• Francesca Liguori and
• Pierluigi Barbaro

Beilstein J. Org. Chem. 2017, 13, 734–754, doi:10.3762/bjoc.13.73

• uptake and use of an excess of amine (quinoline) modifier [12][13], with serious drawbacks in terms of process economy, environmental impact and product separation management. The development of cost-effective, well-defined, efficient and environmentally friendly catalytic systems for the partial