Efficient and selective chemical transformations under flow conditions: The combination of supported catalysts and supercritical fluids

• M. Isabel Burguete,
• Eduardo García-Verdugo and
• Santiago V. Luis

Beilstein J. Org. Chem. 2011, 7, 1347–1359, doi:10.3762/bjoc.7.159

• the enantioselective cyclopropanation with supported copper–bisoxazoline (Cu–BOX) or copper-pyridineoxazoline (Cu–PyOX) complexes and related systems. The oxazoline ligands can be introduced in polystyrene–divinylbenzene (PS–DVB) matrices either by grafting, by reaction with chloromethyl groups of

An overview of the key routes to the best selling 5-membered ring heterocyclic pharmaceuticals

• Marcus Baumann,
• Ian R. Baxendale,
• Steven V. Ley and
• Nikzad Nikbin

Beilstein J. Org. Chem. 2011, 7, 442–495, doi:10.3762/bjoc.7.57

• has been replaced by an oxazolinone ring. The original synthesis utilised 4-nitro-L-phenylalanine (73) as the precursor for the oxazoline moiety (Scheme 16) [19]. The resulting Fischer indole synthesis is similar to that used for sumatriptan (Scheme 9). More recent reports [20] deal with improvements

Molecular rearrangements of superelectrophiles

• Douglas A. Klumpp

Beilstein J. Org. Chem. 2011, 7, 346–363, doi:10.3762/bjoc.7.45

• -dication 14. Subsequent reaction with benzene yields the final product. Using the same chemistry, a chiral 2-oxazoline was shown to give a Friedel–Crafts product in modest diastereoselectivity. A similar reaction was reported [15] in the AlCl3-catalyzed reactions of isoxazolidines (Scheme 3). Product

Synthesis and crystal structures of multifunctional tosylates as basis for star-shaped poly(2-ethyl-2-oxazoline)s

• Richard Hoogenboom,
• Martin W. M. Fijten,
• Guido Kickelbick and
• Ulrich S. Schubert

Beilstein J. Org. Chem. 2010, 6, 773–783, doi:10.3762/bjoc.6.96

• reported. The use of tetra- and hexa-tosylates, based on (di)pentaerythritol as initiators for the CROP of 2-ethyl-2-oxazoline, resulted in very slow initiation and ill-defined polymers, which is most likely caused by steric hindrance in these initiators. As a consequence, a porphyrin-cored tetra-tosylate

• initiator was prepared, which yielded a well-defined star-shaped poly(2-ethyl-2-oxazoline) by CROP as demonstrated by SEC with RI, UV and diode-array detectors, as well as by 1H NMR spectroscopy. Keywords: cationic polymerization; crystal structure; living polymerization; star-polymer; tosylate

• their linear analogues with regard to, e.g., number of functional end-groups, hydrodynamic volume and thermal properties [1][2]. Poly(2-oxazoline)s represent a class of versatile polymer structures that can be prepared by the (CROP) of 2-substituted-2-oxazoline monomers (see the bottom right corner of

Molecular recognition of organic ammonium ions in solution using synthetic receptors

• Andreas Späth and
• Burkhard König

Beilstein J. Org. Chem. 2010, 6, No. 32, doi:10.3762/bjoc.6.32

Concise methods for the synthesis of chiral polyoxazolines and their application in asymmetric hydrosilylation

• Wei Jie Li,
• Zun Le Xu and
• Sheng Xiang Qiu

Beilstein J. Org. Chem. 2010, 6, No. 29, doi:10.3762/bjoc.6.29

• the linkers and the substituents present on the oxazoline rings on the yield and enantioselectivity investigated. Compound 2 was identified as the best ligand of this family for the hydrosilylation of aromatic ketones. Keywords: aromatic ketone; hydrosilylation; polyoxazoline; rhodium; synthesis

• ; Introduction The design and development of effective chiral oxazoline ligands have played a significant role in the advancement of asymmetric catalysis and have attracted a great deal of attention. Various chiral oxazoline ligands have been developed and applied in many catalytic asymmetric reactions to

• the coordination of 5 to [Rh(COD)Cl]2. In addition, the experimental results also show that flexible linkers of oxazoline rings result in low enantioselectivities (entries 11, 12, 14, 15). Table 2 shows that bisoxazoline 2 with benzyl group (entry 10) gave a higher ee than its counterpart

Ring opening metathesis polymerization-derived block copolymers bearing chelating ligands: synthesis, metal immobilization and use in hydroformylation under micellar conditions

• Gajanan M. Pawar,
• Jochen Weckesser,
• Siegfried Blechert and
• Michael R. Buchmeiser

Beilstein J. Org. Chem. 2010, 6, No. 28, doi:10.3762/bjoc.6.28

• . [34]. Using a poly(2-oxazoline)-based amphiphilic copolymer and a RhBr(1,3-dialkylimidazol-2-ylidene-based catalyst, selectivities (n:iso) of ~3 at 40% conversion and an activity (TOF0) of 1630 h−1 in the hydroformylation of 1-octene was observed [35]. Here, we used poly(M1-b-M2)-Rh for the

Efficient and improved synthesis of Telmisartan

• A. Sanjeev Kumar,
• Samir Ghosh and
• G. N. Mehta

Beilstein J. Org. Chem. 2010, 6, No. 25, doi:10.3762/bjoc.6.25

• -formylphenylboronic acid 10 with 2-(2-bromophenyl)-4,4-dimethyl-2-oxazoline (11) as the key step (90% yield). The benzimidazole moiety 15 was constructed regioselectively via a reductive amination-condensation sequence, replacing the alkylation of the preformed benzimidazole step in the previously published route

• . This methodology overcomes many of drawbacks associated with previously reported syntheses. Keywords: antihypertensive drug; oxazoline hydrolysis; Suzuki coupling; Telmisartan; Introduction Telmisartan (1) is an angiotensin II receptor antagonist useful in the treatment of hypertension, heart

• major bond disconnections. We realized biaryl synthesis and reductive amination are the key steps, and have the potential to overcome both of these weaknesses. Results and Discussion We identified 4-formylphenylboronic acid (10) and 2-(2-bromophenyl)-4,4-dimethyl-2-oxazoline (11) [12] as the ideal

Bis(oxazolines) based on glycopyranosides – steric, configurational and conformational influences on stereoselectivity

• Tobias Minuth and
• Mike M. K. Boysen

Beilstein J. Org. Chem. 2010, 6, No. 23, doi:10.3762/bjoc.6.23

• though N-acylated derivatives of D-glucosamine easily form bicyclic carbohydrate oxazolines, until recently only a few examples of mono(oxazoline) ligands [15][16][17] and the corresponding bis(oxazolines) [18] based on this monosaccharide have appeared in the literature. In the course of our work we

• -configured ligand scaffold, will bring the 3-O-substituent into a syn-relationship with the oxazoline nitrogen atom and therefore into very close proximity to a coordinated metal centre (Figure 1, I). Deoxygenation of the 3-postion on the other hand will lead to a ligand with comparably little steric

• shielding of metal centres coordinated by the oxazoline nitrogen atoms (Figure 1, II). As the stereoselectivity of the model reaction for ligands 3a–f improved with decreasing steric demand of the 3-O-substituent and since the best results were obtained with acyl-modified ligands, we also set out to prepare

(Pseudo)amide-linked oligosaccharide mimetics: molecular recognition and supramolecular properties

• José L. Jiménez Blanco,
• Fernando Ortega-Caballero,
• Carmen Ortiz Mellet and
• José M. García Fernández

Beilstein J. Org. Chem. 2010, 6, No. 20, doi:10.3762/bjoc.6.20

• , Chiara and co-workers have described a novel complementary approach in which the oxazoline ring is generated by SN2 nucleophilic displacement reaction from the β-hydroxyurea 30 via the triflate intermediate 31 (Scheme 3) [65]. A similar methodology was used by the same authors to prepare the trehazolin

Mitomycins syntheses: a recent update

• Jean-Christophe Andrez

Beilstein J. Org. Chem. 2009, 5, No. 33, doi:10.3762/bjoc.5.33

• between the methoxy ether and the olefin were probably responsible for this unexpected outcome. However, introduction of a carboethoxy group on the terminus of the olefin 129 restored the regioselectivity observed by Kozikowski to give oxazoline 130. 5.2. Reinhoudt. Rearrangement of 1-(1-pyrrolidinyl)-1,3

• tributyltin fluoride [112]. After protecting group manipulations and formation of the diazoester 138 with p-nitrobenzenesulfonylazide (PNBSA), the key carbene insertion was achieved using copper(I) in the presence of bis-oxazoline 139. A 9:1 ratio of 141 and 142 was obtained after direct chloranil oxidation

Asymmetric synthesis of biaryl atropisomers by dynamic resolution on condensation of biaryl aldehydes with (−)-ephedrine or a proline- derived diamine

• Ann Bracegirdle,
• Jonathan Clayden and
• Lai Wah Lai

Beilstein J. Org. Chem. 2008, 4, No. 47, doi:10.3762/bjoc.4.47

• . A family of starting aldehydes 6a–f was made by the method of Meyers [36]. 2,3-Dimethoxybenzoic acid (1) was converted via its acyl chloride to oxazoline 3, from which the 2-methoxy group was displaced with a series of aryl Grignard reagents 4, yielding biaryloxazolines 5a–f (Scheme 1 and Table 1

• ). Removal of the oxazoline by methylation, reduction and hydrolysis returned the aldehydes 6a–f. Screening for selectivity by NMR In order to investigate the ratios of diastereoisomers formed as these aldehydes condensed with the resolving agents, 6a was mixed with 1 equiv of either 7 or 8 in toluene-d8 or

DBFOX- Ph/metal complexes: Evaluation as catalysts for enantioselective fluorination of 3-(2-arylacetyl)-2-thiazolidinones

• Takehisa Ishimaru,
• Norio Shibata,
• Dhande Sudhakar Reddy,
• Takao Horikawa,
• Shuichi Nakamura and
• Takeshi Toru

Beilstein J. Org. Chem. 2008, 4, No. 16, doi:10.3762/bjoc.4.16

• availability of commonly used classes of ligands for asymmetric catalysis, such as, TADDOLs [37][39][41][47], BINAPs [38][40][43][44][46][49][51][53][55][56][57] and bis(oxazoline) [33][34][36][42][45]. Of particular importance are BINAP ligands. Sodeoka et al. have used the latter ligands in asymmetric

• enantioselectivities [57]. This study is useful because, up until now, the fluorinated products obtained by Sodeoka's method have been prepared by diastereoselective methods [65][66][67]. Independently, our group has focused on the development of enantioselective fluorination and related reactions using bis(oxazoline

• ) ligands, Box-Ph [(S,S)-2,2'-isopropylidene-bis(4-phenyl-2-oxazoline)] and DBFOX-Ph [(R,R)-4,6-dibenzofurandiyl-2,2'-bis(4-phenyloxazoline)] [33][34][36]. As an extension of this study, we herein evaluate our DBFOX-Ph/metal catalysis for the enantioselective fluorination of 3-(2-arylacetyl)-2

A superior P-H phosphonite: Asymmetric allylic substitutions with fenchol- based palladium catalysts

• Bernd Goldfuss,
• Thomas Löschmann,
• Tina Kop-Weiershausen,
• Jörg Neudörfl and
• Frank Rominger

Beilstein J. Org. Chem. 2006, 2, No. 7, doi:10.1186/1860-5397-2-7

• product by employing electron withdrawing substituents on the P-donor atoms in P, N-oxazoline ligands[5] (Scheme 2) [6]. Such phosphites were thought to favor a more SN1-like addition at the substituted, allylic C-atom. High regio- and enantioselectivities were also achieved with biphenylphosphites by