Optimization of the optical coupling in nanowire-based integrated photonic platforms by FDTD simulation

• Nan Guan,
• Andrey Babichev,
• Martin Foldyna,
• Dmitry Denisov,
• François H. Julien and
• Maria Tchernycheva

Beilstein J. Nanotechnol. 2018, 9, 2248–2254, doi:10.3762/bjnano.9.209

• source–waveguide–photodetector platform is the main building block of future multifunctional integrated photonic systems for photonic and sensing applications. (a) Schematic illustration of the platform geometry used for the FDTD simulations. The platform consists of a NW LED, waveguide and NW

Nanoporous silicon nitride-based membranes of controlled pore size, shape and areal density: Fabrication as well as electrophoretic and molecular filtering characterization

• Axel Seidenstücker,
• Stefan Beirle,
• Fabian Enderle,
• Paul Ziemann,
• Othmar Marti and
• Alfred Plettl

Beilstein J. Nanotechnol. 2018, 9, 1390–1398, doi:10.3762/bjnano.9.131

• , multifunctional or even switchable filters appear possible. Fabrication scheme for nanoporous membranes: (a) The commercially available silicon nitride membrane (grey) is coated with a sacrificial layer of silicon oxide (blue) on top of which a quasi-hexagonally ordered array of Au NPs (yellow) is deposited by

Understanding the performance and mechanism of Mg-containing oxides as support catalysts in the thermal dry reforming of methane

• Nor Fazila Khairudin,
• Mohd Farid Fahmi Sukri,
• Mehrnoush Khavarian and
• Abdul Rahman Mohamed

Beilstein J. Nanotechnol. 2018, 9, 1162–1183, doi:10.3762/bjnano.9.108

Facile synthesis of a ZnO–BiOI p–n nano-heterojunction with excellent visible-light photocatalytic activity

• Mengyuan Zhang,
• Jiaqian Qin,
• Pengfei Yu,
• Bing Zhang,
• Mingzhen Ma,
• Xinyu Zhang and
• Riping Liu

Beilstein J. Nanotechnol. 2018, 9, 789–800, doi:10.3762/bjnano.9.72

• becoming a key focus area for the design of novel and multifunctional materials in the field of photocatalysis. To date, unremitting efforts have been devoted to improving the photocatalysis efficiency [26][27][28][29]. Furthermore, coupling n-type semiconductor photocatalysts to p-type to form p–n

Blister formation during graphite surface oxidation by Hummers’ method

• Olga V. Sinitsyna,
• Georgy B. Meshkov,
• Anastasija V. Grigorieva,
• Alexander A. Antonov,
• Inna G. Grigorieva and
• Igor V. Yaminsky

Beilstein J. Nanotechnol. 2018, 9, 407–414, doi:10.3762/bjnano.9.40

• additional experiment was conducted in which the time of the treatment with the oxidation mixture was 3 minutes. Sample characterization AFM measurements were carried out using a FemtoScan multifunctional scanning probe microscope produced by the Advanced Technologies Center. The surface topography was

BN/Ag hybrid nanomaterials with petal-like surfaces as catalysts and antibacterial agents

• Konstantin L. Firestein,
• Denis V. Leybo,
• Alexander E. Steinman,
• Andrey M. Kovalskii,
• Andrei T. Matveev,
• Anton M. Manakhov,
• Irina V. Sukhorukova,
• Pavel V. Slukin,
• Nadezda K. Fursova,
• Sergey G. Ignatov,
• Dmitri V. Golberg and
• Dmitry V. Shtansky

Beilstein J. Nanotechnol. 2018, 9, 250–261, doi:10.3762/bjnano.9.27

• may leave the blood vessels through fenestrations in the endothelial lining [38]. Recent studies have revealed that BN NPs are not toxic and can be additionally saturated with chemotherapeutic agents for multifunctional biological applications [39]. Therefore, our results open up new possibilities for

Synthesis of [{AgO₂CCH₂OMe(PPh₃)}_n] and theoretical study of its use in focused electron beam induced deposition

• Jelena Tamuliene,
• Julian Noll,
• Peter Frenzel,
• Tobias Rüffer,
• Alexander Jakob,
• Bernhard Walfort and
• Heinrich Lang

Beilstein J. Nanotechnol. 2017, 8, 2615–2624, doi:10.3762/bjnano.8.262

• Multifunctional Lightweight Structures and supported by the German Research Foundation (DFG). Special thanks are given to the Digital Computing Centre of Vilnius University for the resources and technical support provided. We also acknowledge Dipl.-Chem. Lutz Mertens and Prof. Dr. Michael Mehring for the PXRD

The interplay between spin densities and magnetic superexchange interactions: case studies of mono- and trinuclear bis(oxamato)-type complexes

• Azar Aliabadi,
• Bernd Büchner,
• Vladislav Kataev and
• Tobias Rüffer

Beilstein J. Nanotechnol. 2017, 8, 2245–2256, doi:10.3762/bjnano.8.224

• magnetic components for future applications in information processing and data storage [8]. To that development, namely the design of novel metalloligands for the synthesis of multinuclear, multidimensional and multifunctional magnetic materials we did already contribute. For example, we reported on the

• -metal complex fragments and transition-metal salts to type-II metalloligands to obtain discrete trinuclear and 1D polynuclear complexes (type III and IV, Scheme 1), respectively, or the synthesis of multifunctional 2D and 3D networks with potential applications in information storage, nanotechnology

• efforts we became interested in possibilities to strengthen and to tailor the J couplings of type-III complexes as well as to identify their magnetic superexchange pathway itself. Such an understanding is one prerequisite for the rational design of new molecular multifunctional magnetic materials for

High-stress study of bioinspired multifunctional PEDOT:PSS/nanoclay nanocomposites using AFM, SEM and numerical simulation

• Alfredo J. Diaz,
• Hanaul Noh,
• Tobias Meier and
• Santiago D. Solares

Beilstein J. Nanotechnol. 2017, 8, 2069–2082, doi:10.3762/bjnano.8.207

• context of a 1-dimensional multibarrier electron potential. Our observations on the conductivity-pressure relationship open up a new spectrum of applications for this type of multifunctional material, in light of its other features, including low gas permeability, fire retardancy, and excellent mechanical

Synthesis and functionalization of NaGdF₄:Yb,Er@NaGdF₄ core–shell nanoparticles for possible application as multimodal contrast agents

• Dovile Baziulyte-Paulaviciene,
• Vitalijus Karabanovas,
• Marius Stasys,
• Greta Jarockyte,
• Vilius Poderys,
• Simas Sakirzanovas and
• Ricardas Rotomskis

Beilstein J. Nanotechnol. 2017, 8, 1815–1824, doi:10.3762/bjnano.8.183

• biologically active molecules, UCNPs could be multifunctional in both therapy and diagnostics (theranostics) [9]. However, biomedical applications require ultrasmall multifunctional nanoparticles to be hydrophilic, biocompatible and have intense upconversion emission and efficient paramagnetic properties

Two-dimensional carbon-based nanocomposites for photocatalytic energy generation and environmental remediation applications

• Suneel Kumar,
• Ashish Kumar,
• Ashish Bahuguna,
• Vipul Sharma and
• Venkata Krishnan

Beilstein J. Nanotechnol. 2017, 8, 1571–1600, doi:10.3762/bjnano.8.159

• -C3N4 makes it a multifunctional photocatalytic material [64]. Therefore, g-C3N4 has attracted immense attention mainly for photocatalytic hydrogen generation reactions and pollutant removal by harvesting visible light due to its suitable band gap energy (≈2.7 eV) [65][66]. Hence this material possesses

• multifunctional, sustainable photocatalytic material. The main drawback from which pure g-C3N4 suffers is poor light absorption and fast recombination of photogenerated electron–hole pairs, which leads to low photocatalytic efficiency and limits its applications [61]. To date, various attempts have been made to

Calcium fluoride based multifunctional nanoparticles for multimodal imaging

• Marion Straßer,
• Joachim H. X. Schrauth,
• Sofia Dembski,
• Daniel Haddad,
• Bernd Ahrens,
• Stefan Schweizer,
• Bastian Christ,
• Alevtina Cubukova,
• Marco Metzger,
• Heike Walles,
• Peter M. Jakob and
• Gerhard Sextl

Beilstein J. Nanotechnol. 2017, 8, 1484–1493, doi:10.3762/bjnano.8.148

• , Germany Fraunhofer Application Center for Inorganic Phosphors, Branch Lab of Fraunhofer Institute for Microstructure of Materials and Systems IMWS, Luebecker Ring 2, 59494 Soest, Germany 10.3762/bjnano.8.148 Abstract New multifunctional nanoparticles (NPs) that can be used as contrast agents (CA) in

• nanoparticles; magnetic resonance imaging (MRI); multifunctional nanoparticles; multimodal imaging; photoluminescence; Introduction In recent years, medical imaging has become an important approach in the fields of diagnostics, therapy and regenerative medicine. Besides the classical technology of X-ray

• is to create multifunctional NPs by precipitation and simultaneous doping of the NP matrix with various ions [8][9]. Due to their co-doping with lanthanide ions, NPs on the basis of calcium phosphate or gadolinium oxide are also detectable by MRI and PL [10][11][12][13]. In recent years, fluorides

Micro- and nano-surface structures based on vapor-deposited polymers

• Hsien-Yeh Chen

Beilstein J. Nanotechnol. 2017, 8, 1366–1374, doi:10.3762/bjnano.8.138

• have recently attracted considerable attention. The multifunctional, gradient, and/or synergistic activities of using such interfaces are also discussed. Finally, an emerging discovery of selective deposition of polymer coatings and the bottom-up patterning approach by using the selective deposition

• technology is demonstrated. Keywords: multifunctional; polymer coating; surface modification; surface patterning; vapor deposition; Review Introduction Vapor-based processes of polymer coating/deposition combine many unique attributes in a dry, solvent-free process, and the deposition protocols as well as

• flat substrates or 3D complex substrates. Next, the creation of multiple or gradient structures/patterns on the polymers provides an interfacial template with multifunctional reactivity and gradient information for multifunctional or directional activities. Then, the emerging discovery of the selective

A top-down approach for fabricating three-dimensional closed hollow nanostructures with permeable thin metal walls

• Carlos Angulo Barrios and
• Víctor Canalejas-Tejero

Beilstein J. Nanotechnol. 2017, 8, 1231–1237, doi:10.3762/bjnano.8.124

• is typically required to create integrated systems based on multifunctional devices on a chip. For the latter purpose, top-down approaches based on fabrication methods used in the microelectronics industry are particularly well-suited because of the patterning design flexibility and controllability

Ultrasmall magnetic field-effect and sign reversal in transistors based on donor/acceptor systems

• Thomas Reichert and
• Tobat P. I. Saragi

Beilstein J. Nanotechnol. 2017, 8, 1104–1114, doi:10.3762/bjnano.8.112

• the way towards efficient, multifunctional organic spin-devices. Experimental Bottom-contact field-effect transistor substrates were purchased from Fraunhofer IPMS (Dresden, Germany) with channel lengths (L) between 2.5 and 20 µm and channel width (W) of 10 mm. The isolation layer consists of 230 ± 10

Recombinant DNA technology and click chemistry: a powerful combination for generating a hybrid elastin-like-statherin hydrogel to control calcium phosphate mineralization

• Mohamed Hamed Misbah,
• Mercedes Santos,
• Luis Quintanilla,
• Christina Günter,
• Matilde Alonso,
• Andreas Taubert and
• José Carlos Rodríguez-Cabello

Beilstein J. Nanotechnol. 2017, 8, 772–783, doi:10.3762/bjnano.8.80

• advanced multifunctional materials. The generation of such multifunctional hybrid materials depends on the properties of their counterparts and the way in which they are assembled. The success of this assembly depends on the different approaches used, such as recombinant DNA technology and click chemistry

• data show an increase in the Ca/P ratio with increasing reaction time, irrespective of the type of hydrogel used for mineralization. Discussion The combination of two or more materials can give rise to the formation of a multifunctional hybrid system with properties superior to those of each component

Vapor deposition routes to conformal polymer thin films

• Priya Moni,
• Ahmed Al-Obeidi and
• Karen K. Gleason

Beilstein J. Nanotechnol. 2017, 8, 723–735, doi:10.3762/bjnano.8.76

• CVD both in conformality and functional group retention for the deposition of conformal sensing molecules on microfluidic devices [30]. This concept was later used to enable PDMS-free microfluidic devices for oxygen-free flow-lithography, a process that can generate multifunctional micro and nano

Synthesis of graphene–transition metal oxide hybrid nanoparticles and their application in various fields

• Arpita Jana,
• Elke Scheer and
• Sebastian Polarz

Beilstein J. Nanotechnol. 2017, 8, 688–714, doi:10.3762/bjnano.8.74

Methods for preparing polymer-decorated single exchange-biased magnetic nanoparticles for application in flexible polymer-based films

• Laurence Ourry,
• Delphine Toulemon,
• Souad Ammar and
• Fayna Mammeri

Beilstein J. Nanotechnol. 2017, 8, 408–417, doi:10.3762/bjnano.8.43

• Polymer-based hybrid materials are opening the way for engineering new, multifunctional, flexible materials exhibiting novel properties (e.g., mechanical, magnetic, electrical, optical) due to the synergy between the two components, polymer and inorganic nanoparticles (NPs) [1]. In the case of magnetic

Tailoring bifunctional hybrid organic–inorganic nanoadsorbents by the choice of functional layer composition probed by adsorption of Cu²⁺ ions

• Veronika V. Tomina,
• Inna V. Melnyk,
• Yuriy L. Zub,
• Aivaras Kareiva,
• Miroslava Vaclavikova,
• Gulaim A. Seisenbaeva and
• Vadim G. Kessler

Beilstein J. Nanotechnol. 2017, 8, 334–347, doi:10.3762/bjnano.8.36

• ; Introduction Materials with bi- or multifunctional surface layers have been of considerable interest in the recent years [1][2][3][4][5][6][7][8][9][10][11]. Such materials possess, undoubtedly, certain advantages over the materials with monofunctional coatings. For example, multifunctional drug-delivery

• agents may have functionalities ensuring their transportation to the desired target after introduction in the human body, whereas the functionalities of a different nature exert their, e.g., therapeutic effect [12]. Moreover, the creation of a multifunctional surface layer is an instrument for the subtle

Template-controlled piezoactivity of ZnO thin films grown via a bioinspired approach

• Nina J. Blumenstein,
• Fabian Streb,
• Stefan Walheim,
• Thomas Schimmel,
• Zaklina Burghard and
• Joachim Bill

Beilstein J. Nanotechnol. 2017, 8, 296–303, doi:10.3762/bjnano.8.32

• templates with different functionalities [25][29][30][31][32][33][34][35] or to change the roughness of the growing films [36]. The principle of these methods was adapted from nature where multifunctional materials are produced under ambient conditions. Mollusks for example produce the organic/inorganic

A new approach to grain boundary engineering for nanocrystalline materials

• Shigeaki Kobayashi,
• Sadahiro Tsurekawa and
• Tadao Watanabe

Beilstein J. Nanotechnol. 2016, 7, 1829–1849, doi:10.3762/bjnano.7.176

• nanocrystalline materials, as well as ordinary polycrystalline materials. Accordingly, it is reasonable to consider that the GBE approach that the authors of this work have been deeply involved so far should become of increasing importance in the development of high performance and multifunctional nanocrystalline

Antitumor magnetic hyperthermia induced by RGD-functionalized Fe₃O₄ nanoparticles, in an experimental model of colorectal liver metastases

• Oihane K. Arriortua,
• Eneko Garaio,
• Borja Herrero de la Parte,
• Maite Insausti,
• Luis Lezama,
• Fernando Plazaola,
• Jose Angel García,
• Jesús M. Aizpurua,
• Maialen Sagartzazu,
• Mireia Irazola,
• Nestor Etxebarria,
• Ignacio García-Alonso,
• Alberto Saiz-López and
• José Javier Echevarria-Uraga

Beilstein J. Nanotechnol. 2016, 7, 1532–1542, doi:10.3762/bjnano.7.147

• applicability toward diverse substrates is “click chemistry” [29][30]. Moreover, multistep reactions could be shortened by combining click chemistry with other conventional bioconjugation methods. Such strategies are commonly involved in the preparation of multifunctional nano-biohybrids with the advantage of

Viability and proliferation of endothelial cells upon exposure to GaN nanoparticles

• Tudor Braniste,
• Ion Tiginyanu,
• Tibor Horvath,
• Simion Raevschi,
• Serghei Cebotari,
• Marco Lux,
• Axel Haverich and
• Andres Hilfiker

Beilstein J. Nanotechnol. 2016, 7, 1330–1337, doi:10.3762/bjnano.7.124

• multifunctional and hybrid “smart materials” for biological and medical applications is of paramount importance [1]. Biomaterial research is closely associated with the development of chemical/biochemical sensors, hydrogels, membranes, and artificial organs, and is utilized in applications such as the recognition

Functional diversity of resilin in Arthropoda

• Jan Michels,
• Esther Appel and
• Stanislav N. Gorb

Beilstein J. Nanotechnol. 2016, 7, 1241–1259, doi:10.3762/bjnano.7.115

• that are typically thin, non-sclerotised and very flexible. Such membranes often are multifunctional units. The soft cuticles of caterpillars, for example, have a combination of both a protective and a locomotory role, which is reflected in their ultrastructural architecture [58]. The main functions of