Hexagonal boron nitride: a review of the emerging material platform for single-photon sources and the spin–photon interface

• Stefania Castelletto,
• Faraz A. Inam,
• Shin-ichiro Sato and
• Alberto Boretti

Beilstein J. Nanotechnol. 2020, 11, 740–769, doi:10.3762/bjnano.11.61

Multilayer capsules made of weak polyelectrolytes: a review on the preparation, functionalization and applications in drug delivery

• Varsha Sharma and
• Anandhakumar Sundaramurthy

Beilstein J. Nanotechnol. 2020, 11, 508–532, doi:10.3762/bjnano.11.41

• core. The schematic diagram of layer-by-layer (LbL) deposition on colloidal templates, core dissolution and drug encapsulation into LbL-assembled capsules is shown in Figure 1. The method of fabricating core–shell particles and multilayered hollow capsules via LbL assembly was originally proposed and

Molecular architectonics of DNA for functional nanoarchitectures

• Debasis Ghosh,
• Lakshmi P. Datta and
• Thimmaiah Govindaraju

Beilstein J. Nanotechnol. 2020, 11, 124–140, doi:10.3762/bjnano.11.11

• involves critical optimization of the sensor platforms. The length of the target oligonucleotide sequence and the selective use of dopants significantly dominate the sensing efficacy [63]. In this context, electrochemical DNA sensors were developed by noncovalent layer-by-layer assemblies of phenothiazine

Long-term stability and scale-up of noncovalently bound gold nanoparticle-siRNA suspensions

• Anna V. Epanchintseva,
• Julia E. Poletaeva,
• Dmitrii V. Pyshnyi,
• Elena I. Ryabchikova and
• Inna A. Pyshnaya

Beilstein J. Nanotechnol. 2019, 10, 2568–2578, doi:10.3762/bjnano.10.248

• silencing the protein synthesis to improve abnormal protein production caused by genomic disorders or diseases [6][7][8]. Different variants of AuNP-based nanoconstructions bearing siRNA have been published, and most of them were created by applying the layer-by-layer principle [9]. The core of these

Review of advanced sensor devices employing nanoarchitectonics concepts

• Katsuhiko Ariga,
• Tatsuyuki Makita,
• Masato Ito,
• Taizo Mori,
• Shun Watanabe and
• Jun Takeya

Beilstein J. Nanotechnol. 2019, 10, 2014–2030, doi:10.3762/bjnano.10.198

• and resulted in a highly sensitive sensing material for aniline vapor [125]. Layer-by-layer structures of mesoporous carbon capsules can work as sensing membranes capable of selectively sensing through the doping of secondary sensing units [126]. As an emerging nanoporous material, metal–organic

• monolayers [133][134], Langmuir–Blodgett films [135][136][137], and layer-by-layer assembly [138][139][140][141] on sensors and related devices is a key nanoarchitectonics step for sensor fabrication. For example, Furusawa et al. immobilized nickel-nitrilotriacetic acid within a self-assembled monolayer on

Nanostructured and oriented metal–organic framework films enabling extreme surface wetting properties

• Andre Mähringer,
• Julian M. Rotter and
• Dana D. Medina

Beilstein J. Nanotechnol. 2019, 10, 1994–2003, doi:10.3762/bjnano.10.196

• example, sol–gel synthesis, electrochemical deposition, anodization, electrochemical polymerization, electrospinning, plasma treatment, chemical or hydrothermal methods, vapor deposition, layer-by-layer assembly or laser ablation [19][27][28][29][30][31][32][33][34][35][36][37][38][39]. However, the

Layered double hydroxide/sepiolite hybrid nanoarchitectures for the controlled release of herbicides

• Ediana Paula Rebitski,
• Margarita Darder and
• Pilar Aranda

Beilstein J. Nanotechnol. 2019, 10, 1679–1690, doi:10.3762/bjnano.10.163

• used strategies included wet impregnation and layer-by-layer approaches to produce diverse type of multilayer heterostructures, e.g., ZnCr-LDH/TiO2 films [30], in situ formation of the LDH in presence of other nanoparticles, e.g., sepiolite [31], and reconstruction of the LDH from parent “layered

Materials nanoarchitectonics at two-dimensional liquid interfaces

• Katsuhiko Ariga,
• Michio Matsumoto,
• Taizo Mori and
• Lok Kumar Shrestha

Beilstein J. Nanotechnol. 2019, 10, 1559–1587, doi:10.3762/bjnano.10.153

• –Blodgett method, liquid–liquid interfacial precipitation, instructed assembly, and layer-by-layer assembly to give low-dimensional materials including nanowires, nanowhiskers, nanosheets, cubic objects, molecular patterns, supramolecular polymers, metal-organic frameworks and covalent organic frameworks

• sophisticated strategy to realize chemotherapy targeting at cancer cells using the controlled assembly and disassembly of layer-by-layer hybrid structures made of two dimensional MoS2 nanosheets with DNA [87]. The preparation of functional low-dimensional materials requires preservation of nanoscale features in

• -dimensional CuO petal assemblies (by Abe and co-workers [133]), perovskite nanosheets and their layer-by-layer assemblies as high-k dielectric/ferroelectric materials (by Osada and Sasaki [134]), the manipulation of transition-metal dichalcogenides nanosheets for the usage in energy storage/conversion

Gas sensing properties of individual SnO₂ nanowires and SnO₂ sol–gel nanocomposites

• Alexey V. Shaposhnik,
• Dmitry A. Shaposhnik,
• Sergey Yu. Turishchev,
• Olga A. Chuvenkova,
• Stanislav V. Ryabtsev,
• Alexey A. Vasiliev,
• Xavier Vilanova,
• Francisco Hernandez-Ramirez and
• Joan R. Morante

Beilstein J. Nanotechnol. 2019, 10, 1380–1390, doi:10.3762/bjnano.10.136

• and high surface-to-volume ratio, obtained by sintering, are traditionally used as sensing materials. By means of preparation methods such as magnetron sputtering, laser ablation, and pulverization, layer-by-layer nanoparticle deposition can be achieved with adhesion to the substrate and to previously

Janus-micromotor-based on–off luminescence sensor for active TNT detection

• Ye Yuan,
• Changyong Gao,
• Daolin Wang,
• Chang Zhou,
• Baohua Zhu and
• Qiang He

Beilstein J. Nanotechnol. 2019, 10, 1324–1331, doi:10.3762/bjnano.10.131

• capsule motors were fabricated by layer-by-layer assembly of UCNP-functionalized polyelectrolyte microcapsules, followed by sputtering of a platinum layer onto one half of the capsule. By catalytic decomposition of hydrogen peroxide to oxygen bubbles, the Janus UCNP capsule motors are rapidly propelled

• of detection as low as 2.4 ng mL−1 TNT within 1 minute. Such bubble-propelled Janus UCNP capsule motors have great potential for contaminated water analysis. Keywords: autonomous motion; bubble propulsion; Janus micromotors; layer-by-layer assembly; TNT detection; upconverting nanoparticles (UCNPs

• hydrochloride) (PAH) and poly(styrene sulfonate) (PSS) were alternately deposited onto the surface of 5 μm silica particles by layer-by-layer (LbL) assembly [38][39][40][41]. The as-prepared particles were subsequently modified with amine-functionalized UCNPs through electrostatic interactions and then were

A silver-nanoparticle/cellulose-nanofiber composite as a highly effective substrate for surface-enhanced Raman spectroscopy

• Yongxin Lu,
• Yan Luo,
• Zehao Lin and
• Jianguo Huang

Beilstein J. Nanotechnol. 2019, 10, 1270–1279, doi:10.3762/bjnano.10.126

• methodologies such as self-organization and layer-by-layer self-assembly [7][15][16][17]. In particular, layer-by-layer self-assembly holds significant potentials for the fabrication of a large variety of functional nanoarchitectures [18][19][20][21][22][23][24][25]. It has been demonstrated that the different

Photoactive nanoarchitectures based on clays incorporating TiO₂ and ZnO nanoparticles

• Eduardo Ruiz-Hitzky,
• Pilar Aranda,
• Marwa Akkari,
• Nithima Khaorapapong and
• Makoto Ogawa

Beilstein J. Nanotechnol. 2019, 10, 1140–1156, doi:10.3762/bjnano.10.114

• multilayer films using layer-by-layer self-assembly has been reported by Ma and co-workers [103]. TiO2 NPs have been also precipitated in the presence of layered silicates such as montmorillonite and hectorite using Ti alkoxides or TiCl4 and TiCl3 as precursors. Similarly, ZnO NPs have been assembled with

Scavenging of reactive oxygen species by phenolic compound-modified maghemite nanoparticles

• Małgorzata Świętek,
• Yi-Chin Lu,
• Rafał Konefał,
• Liliana P. Ferreira,
• M. Margarida Cruz,
• Yunn-Hwa Ma and
• Daniel Horák

Beilstein J. Nanotechnol. 2019, 10, 1073–1088, doi:10.3762/bjnano.10.108

• modified with polymers via a layer-by-layer (LbL) technique [17]. Two naturally derived polymers, namely, anionic heparin and cationic chitosan, were used as nanoparticle coatings, and three phenolic compounds, including hydroquinone, phloroglucinol, and gallic acid, differing in the number of hydroxy

On the transformation of “zincone”-like into porous ZnO thin films from sub-saturated plasma enhanced atomic layer deposition

• Alberto Perrotta,
• Julian Pilz,
• Stefan Pachmajer,
• Antonella Milella and
• Anna Maria Coclite

Beilstein J. Nanotechnol. 2019, 10, 746–759, doi:10.3762/bjnano.10.74

• methods for the production of (ultra-)thin inorganic and organic films [1][2]. The layer-by-layer nature of these methods allows for the deposition of highly conformal thin films with sub-nanometer thickness control, making them the techniques of choice for complex high aspect ratio nanostructured

Ultrathin hydrophobic films based on the metal organic framework UiO-66-COOH(Zr)

• Miguel A. Andrés,
• Clemence Sicard,
• Christian Serre,
• Olivier Roubeau and
• Ignacio Gascón

Beilstein J. Nanotechnol. 2019, 10, 654–665, doi:10.3762/bjnano.10.65

• homogeneity [11]. Therefore, several strategies have been used for the deposition of MOF films [12], including direct growth [13][14], electrochemical deposition [15], inkjet-printing [16], dip-coating [17], layer-by-layer [18][19][20], Langmuir–Blodgett [21][22], chemical vapor deposition [23], spin-coating

Gold nanoparticles embedded in a polymer as a 3D-printable dichroic nanocomposite material

• Lars Kool,
• Anton Bunschoten,
• Aldrik H. Velders and
• Vittorio Saggiomo

Beilstein J. Nanotechnol. 2019, 10, 442–447, doi:10.3762/bjnano.10.43

• not show significant differences in the elastic modulus giving an average of 3.5 ± 0.8 MPa and 3.8 ± 0.6 MPa, respectively (Figure 2c). The relatively high standard deviation error is given by the intrinsic layer-by-layer 3D fabrication method. The filament was used for printing different “21st

Site-specific growth of oriented ZnO nanocrystal arrays

• Rekha Bai,
• Dinesh K. Pandya,
• Sujeet Chaudhary,
• Veer Dhaka,
• Vladislav Khayrudinov,
• Jori Lemettinen,
• Christoffer Kauppinen and
• Harri Lipsanen

Beilstein J. Nanotechnol. 2019, 10, 274–280, doi:10.3762/bjnano.10.26

• face and side facets possess an overall length (2L) of ≈700 nm and a width/diagonal (D) of ≈600 nm. Typically, the top hexagonal faces of nanocrystals are composed of flat hexagonal terraces as seen in Figure 2b,c, characteristic of the layer-by-layer growth mechanism and are thus a clear indication of

Uniform Sb₂S₃ optical coatings by chemical spray method

• Jako S. Eensalu,
• Atanas Katerski,
• Erki Kärber,
• Ilona Oja Acik,
• Arvo Mere and
• Malle Krunks

Beilstein J. Nanotechnol. 2019, 10, 198–210, doi:10.3762/bjnano.10.18

• , a.k.a. Volmer–Weber growth; 2D layer-by-layer growth occurs if Equation 2 is valid, a.k.a. Frank–Van der Merwe growth; combined 2D layer-by layer and 3D island growth occurs if Equation 3 is valid, a.k.a. Stranski–Krastanov growth [36][41][42][43]. Furthermore, SEM surface studies show cap-shaped

A novel polyhedral oligomeric silsesquioxane-modified layered double hydroxide: preparation, characterization and properties

• Xianwei Zhang,
• Zhongzhu Ma,
• Hong Fan,
• Carla Bittencourt,
• Jintao Wan and
• Philippe Dubois

Beilstein J. Nanotechnol. 2018, 9, 3053–3068, doi:10.3762/bjnano.9.284

• are presented in Figure 6a. These patterns exhibit a series of well-defined (00l) Bragg reflections with the basal spacing. In addition, higher-order reflections appear at low angles, and there are in-plane (110) peaks at high angles. The measurements indicate the formation of a layer-by-layer ordered

Ternary nanocomposites of reduced graphene oxide, polyaniline and hexaniobate: hierarchical architecture and high polaron formation

• Claudio H. B. Silva,
• Maria Iliut,
• Christopher Muryn,
• Christian Berger,
• Zachary Coldrick,
• Vera R. L. Constantino,
• Marcia L. A. Temperini and
• Aravind Vijayaraghavan

Beilstein J. Nanotechnol. 2018, 9, 2936–2946, doi:10.3762/bjnano.9.272

• electrocatalytic activity in the quantification of chemical species compared to the isolated components [5]. In earlier studies, some of us reported the preparation of binary nanocomposites of polyaniline (PANI) and hexaniobate (hexNb) nanoscrolls by layer-by-layer assembly and the characterisation by

Pattern generation for direct-write three-dimensional nanoscale structures via focused electron beam induced deposition

• Lukas Keller and
• Michael Huth

Beilstein J. Nanotechnol. 2018, 9, 2581–2598, doi:10.3762/bjnano.9.240

• uses a layer-by-layer based technique [4]. The design of the desired 3D structure is partitioned into horizontal slices parallel to the substrate surface. For each slice a full set of structure-definition steps, typically combining physical vapor deposition and UV or electron beam lithography, are

Effect of electrospinning process variables on the size of polymer fibers and bead-on-string structures established with a 2³ factorial design

• Paulina Korycka,
• Adam Mirek,
• Katarzyna Kramek-Romanowska,
• Marcin Grzeczkowicz and
• Dorota Lewińska

Beilstein J. Nanotechnol. 2018, 9, 2466–2478, doi:10.3762/bjnano.9.231

• , it is possible to obtain fibers of different structure: porous, smooth, core–shell, hollow structures and layer-by-layer stacked films or uniaxially aligned arrays [2]. Because of the variety of obtained structures that are possible, electrospun nanofibers find applications in well-established

Electrospun one-dimensional nanostructures: a new horizon for gas sensing materials

• Muhammad Imran,
• Nunzio Motta and
• Mahnaz Shafiei

Beilstein J. Nanotechnol. 2018, 9, 2128–2170, doi:10.3762/bjnano.9.202

• NTs are synthesized using layer-by-layer (LBL) self-assembly of tungsten as well as catalyst precursor on PMMA electrospun nanofibers. Pristine WO3 NTs exhibit a high response (Rgas/Rair) of 63.59 to 5 ppm NO at 350 °C. On the other hand, a high response of 2.24 for the Pt-WO3 NTs and 2.35 for the Pd

Recent highlights in nanoscale and mesoscale friction

• Andrea Vanossi,
• Dirk Dietzel,
• Andre Schirmeisen,
• Ernst Meyer,
• Rémy Pawlak,
• Thilo Glatzel,
• Marcin Kisiel,
• Shigeki Kawai and
• Nicola Manini

Beilstein J. Nanotechnol. 2018, 9, 1995–2014, doi:10.3762/bjnano.9.190

• surface-force balance and an impressive evidence of layering effects on friction was demonstrated [114]. RTILs are being also investigated as additives in liquid lubrication [115]. Modeling has investigated the role of the molecular shape of the ions [116][117] and the layer-by-layer squeeze-out

Synthesis of a MnO₂/Fe₃O₄/diatomite nanocomposite as an efficient heterogeneous Fenton-like catalyst for methylene blue degradation

• Zishun Li,
• Xuekun Tang,
• Kun Liu,
• Jing Huang,
• Yueyang Xu,
• Qian Peng and
• Minlin Ao

Beilstein J. Nanotechnol. 2018, 9, 1940–1950, doi:10.3762/bjnano.9.185

• nanocomposite is synthesized and then used as heterogeneous Fenton-like catalyst to degrade the organic pollutant methylene blue (MB) with the activation of PMS. The characterization results show that the Fe3O4 nanoparticles and nanoflower-like MnO2 are evenly distributed layer-by-layer on the surface of