Hypervalent iodine-mediated cyclization of bishomoallylamides to prolinols

• Smaher E. Butt,
• Konrad Kepski,
• Jean-Marc Sotiropoulos and
• Wesley J. Moran

Beilstein J. Org. Chem. 2024, 20, 2455–2460, doi:10.3762/bjoc.20.209

• Pierre Angot, 64053 Pau Cedex 09, France School of Pharmacy and Bioengineering, Keele University, Keele, Staffordshire ST5 5JX, United Kingdom 10.3762/bjoc.20.209 Abstract A change in mechanism was observed in the hypervalent iodine-mediated cyclization of N-alkenylamides when the carbon chain between

• , reaction conditions were developed, and the scope of this cyclization studied. Keywords: cyclization; DFT; hypervalent iodine; mechanism; proline; Introduction Proline is one of the 20 DNA-encoded proteinogenic amino acids that are essential to life [1][2]. In addition, the pyrrolidine core is present in

• enantioselective conjugate addition to α,β-unsaturated pyroglutamic acid derivatives followed by deoxygenation [10], and the enantioselective organocatalytic reaction between 2-acylaminomalonates and α,β-unsaturated aldehydes [11][12]. The development of new synthetic methods using hypervalent iodine reagents has

Evaluating the halogen bonding strength of a iodoloisoxazolium(III) salt

• Dominik L. Reinhard,
• Anna Schmidt,
• Marc Sons,
• Julian Wolf,
• Elric Engelage and
• Stefan M. Huber

Beilstein J. Org. Chem. 2024, 20, 2401–2407, doi:10.3762/bjoc.20.204

• . Finally, the potential as halogen-bonding activator was benchmarked in solution in the gold-catalyzed cyclization of a propargyl amide. Keywords: diaryliodonium; gold catalysis; halogen bonding; hypervalent iodine; non-covalent interactions; Introduction The compound class of diaryliodonium (DAI) salts

Hydrogen-bond activation enables aziridination of unactivated olefins with simple iminoiodinanes

• Phong Thai,
• Lauv Patel,
• Diyasha Manna and
• David C. Powers

Beilstein J. Org. Chem. 2024, 20, 2305–2312, doi:10.3762/bjoc.20.197

• Phong Thai Lauv Patel Diyasha Manna David C. Powers Department of Chemistry, Texas A&M University, College Station TX, 77843, USA 10.3762/bjoc.20.197 Abstract Iminoiodinanes comprise a class of hypervalent iodine reagents that is often encountered in nitrogen-group transfer (NGT) catalysis. In

• the potential for chemical non-innocence of fluorinated alcohol solvents in NGT catalysis. Keywords: aziridination; electrochemistry; H-bond activation; hypervalent iodine; nitrene transfer; Introduction Hypervalent iodine reagents find widespread application in selective oxidation chemistry due to

• ]. Iminoiodinanes (ArI=NR) are a subclass of hypervalent iodine reagents that function as nitrene equivalents in synthesis [5][6]. The direct reaction of iminoiodinanes with olefins, which could be envisioned to give rise to aziridines directly, is typically not observed and thus families of transition metal

Multicomponent syntheses of pyrazoles via (3 + 2)-cyclocondensation and (3 + 2)-cycloaddition key steps

• Ignaz Betcke,
• Alissa C. Götzinger,
• Maryna M. Kornet and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2024, 20, 2024–2077, doi:10.3762/bjoc.20.178

• esters are tolerated in the method [113]. Starting from enaminone 86 functionalization, the hypervalent iodine compound 87 facilitates the introduction of a difluoromethanesulfonyl group in the copper(I) bromide-mediated consecutive three-component synthesis of difluoromethanesulfonyl-functionalized

Harnessing the versatility of hydrazones through electrosynthetic oxidative transformations

• Aurélie Claraz

Beilstein J. Org. Chem. 2024, 20, 1988–2004, doi:10.3762/bjoc.20.175

• formed hydrazinyl radical 105 which underwent second anodic oxidation/cyclization and deprotonation sequence to build the 1-aminotetrazole 103 (Scheme 19) [66]. It is interesting to note that this mechanism differs from the one proposed by Zhu et al., who reported a hypervalent iodide-mediated similar

Solvent-dependent chemoselective synthesis of different isoquinolinones mediated by the hypervalent iodine(III) reagent PISA

• Ze-Nan Hu,
• Yan-Hui Wang,
• Jia-Bing Wu,
• Ze Chen,
• Dou Hong and
• Chi Zhang

Beilstein J. Org. Chem. 2024, 20, 1914–1921, doi:10.3762/bjoc.20.167

• isoquinolinone derivatives. The method provides highly chemoselective access to 3- or 4-substituted isoquinolinone derivatives by reacting o-alkenylbenzamide derivatives with PISA in either acetonitrile or wet hexafluoro-2-isopropanol. Keywords: annulation; C–H amination; hypervalent iodine reagent; iodine(III

• option for the preparation of isoquinolinone derivatives. In 2020, two reports have been published on the conversion of alkyne-tethered N-alkoxybenzamides to isoquinolinones by intramolecular oxidative annulation, either electrochemically or using the hypervalent iodine reagent phenyliodine(III

• zwitterionic water-soluble hypervalent iodine reagent (phenyliodonio)sulfamate (PISA). In water, PISA is strongly acidic, and the pH value can reach 2.05 in a saturated aqueous solution. With PISA, various indoles have been synthesized via C–H amination of 2-alkenylanilines involving an aryl migration

Oxidative fluorination with Selectfluor: A convenient procedure for preparing hypervalent iodine(V) fluorides

• Samuel M. G. Dearman,
• Xiang Li,
• Yang Li,
• Kuldip Singh and
• Alison M. Stuart

Beilstein J. Org. Chem. 2024, 20, 1785–1793, doi:10.3762/bjoc.20.157

• investigate hypervalent iodine(V) fluorides has been limited primarily by their difficult preparation traditionally using harsh fluorinating reagents such as trifluoromethyl hypofluorite and bromine trifluoride. Here, we report a mild and efficient route using Selectfluor to deliver hypervalent iodine(V

• ; fluorobenziodoxoles; halogen bonding; hypervalent iodine; Selectfluor; Introduction An important strategy in the drug discovery process is the incorporation of fluorine into biologically active molecules because fluorine can improve bioactivity and pharmacokinetic properties [1]. Consequently, 22% of all small

• -molecule drugs contain at least one fluorine atom [2]. Hypervalent iodine(III) fluorides, such as difluoroiodotoluene 1 and fluoroiodane 2, have been key to the development of numerous, new synthetic procedures for C–F bond formation over the last decade. Since difluoroiodotoluene 1 has low chemical

Synthesis of polycyclic aromatic quinones by continuous flow electrochemical oxidation: anodic methoxylation of polycyclic aromatic phenols (PAPs)

• Hiwot M. Tiruye,
• Solon Economopoulos and
• Kåre B. Jørgensen

Beilstein J. Org. Chem. 2024, 20, 1746–1757, doi:10.3762/bjoc.20.153

• radical (potassium nitrosodisulfonate) [13] or catalytic systems like methyltrioxorhenium(VII) (MeReO3) [14] and 2-iodobenzenesulfonic acids (IBS)/Oxone® [15] led to either p-quinones or o-quinones, depending on the substituents in the para-position to the hydroxy group. Recently, hypervalent iodine

Oxidation of benzylic alcohols to carbonyls using N-heterocyclic stabilized λ³-iodanes

• Thomas J. Kuczmera,
• Pim Puylaert and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2024, 20, 1677–1683, doi:10.3762/bjoc.20.149

• )iodane is proposed as the reactive intermediate. Keywords: alcohol oxidation; hypervalent iodine; N-heterocycles; Introduction The oxidation of alcohols to aldehydes and ketones is an essential transformation in organic chemistry [1][2]. Generating aldehydes is particularly challenging as they are

• oxidants in combination with transition-metal catalysts. Metal-free methods employ chlorodimethylsulfonium compounds as the reactive species and have gained great popularity under the name Swern oxidation or the Corey–Kim oxidation [11]. Hypervalent iodine compounds have also been studied and are well

• -iodanes have drawbacks, in particular low solubility and moisture sensitivity [11]. Hypervalent iodine compounds in a lower oxidation state (λ3-iodanes), such as iodosobenzene (PhIO)n or phenyliodine(III) diacetate (PIDA) have been reported in alcohol oxidations but they often result in overoxidation to

Divergent role of PIDA and PIFA in the AlX₃ (X = Cl, Br) halogenation of 2-naphthol: a mechanistic study

• Kevin A. Juárez-Ornelas,
• Manuel Solís-Hernández,
• Pedro Navarro-Santos,
• J. Oscar C. Jiménez-Halla and
• César R. Solorio-Alvarado

Beilstein J. Org. Chem. 2024, 20, 1580–1589, doi:10.3762/bjoc.20.141

• halogenation via PhIX2. Keywords: aromatic bromination; aromatic chlorination; density functional theory (DFT); hypervalent iodine; iodine(III); Introduction Hypervalent iodine(III) reagents have gained attention as strong oxidants with a low toxicity [1][2][3][4][5][6][7][8] and due to the ability to mimic

• . In contrast to the suggested traceroute where the chlorine or bromine atom is attached to the hypervalent iodine center of the plausible reagent PhIX2 (X = Cl, Br), our new protocol opens up a broad path for the reaction through different halogenating species. For a deeper understanding of these

• 0 kcal/mol for more clarity. Herein, one chlorine atom is transferred from aluminum to the hypervalent iodine(III) center through six-membered-ring transition state TS1–Cl (ΔG‡ = 9.7 kcal/mol, selected bond lengths 2.76, 1.22, 1.27, 1.78, 2.60, and 2.86 Å for I–O, O–C, C–O, O–Al, Al–Cl, and Cl–I

Benzylic C(sp³)–H fluorination

• Alexander P. Atkins,
• Alice C. Dean and
• Alastair J. J. Lennox

Beilstein J. Org. Chem. 2024, 20, 1527–1547, doi:10.3762/bjoc.20.137

• substituents on the aryl group benefitted from fewer HF equivalents and the addition of silver fluoride. A follow-up report showed that only minor alterations to the conditions were needed to make the process amenable to the use of [18F]KF, facilitating radiofluorination [81]. Both reports used hypervalent

• is subsequently oxidised to Mn(V)-oxo species II by hypervalent iodine oxidant PhIO. This can perform a HAT from the benzylic substrate, in turn generating a benzylic radical and Mn(IV)-hydroxy species III. Ligand exchange with the fluoride source affords complex IV, which performs FAT with the

• hypervalent fluoroiodane reagents [92][93]. In 2000, Fuchigami and co-workers demonstrated the effectiveness of these reagents in the oxidative electrochemical fluorination of benzylic positions adjacent to thiocyanate groups (Figure 36) [94]. The authors proposed anodic oxidation to generate a radical cation

Tetrabutylammonium iodide-catalyzed oxidative α-azidation of β-ketocarbonyl compounds using sodium azide

• Christopher Mairhofer,
• David Naderer and
• Mario Waser

Beilstein J. Org. Chem. 2024, 20, 1510–1517, doi:10.3762/bjoc.20.135

• addition, the recent years have seen remarkable progress in utilizing electrophilic azide-transfer reagents, i.e., hypervalent iodine-based compounds, for (asymmetric) α-azidations [16][17][18][19][20][21][22][23]. Besides these valuable approaches, which either require appropriate pre-functionalization of

• mechanistic scenario. Application scope. Proof-of-concept for the analogous oxidative α-nitration. Optimization of the α-azidation of β-ketoester 1aa. Control experiments using different hypervalent iodine speciesa. Supporting Information Supporting Information File 24: Full experimental and analytical

Synthesis of 4-functionalized pyrazoles via oxidative thio- or selenocyanation mediated by PhICl₂ and NH₄SCN/KSeCN

• Jialiang Wu,
• Haofeng Shi,
• Xuemin Li,
• Jiaxin He,
• Chen Zhang,
• Fengxia Sun and
• Yunfei Du

Beilstein J. Org. Chem. 2024, 20, 1453–1461, doi:10.3762/bjoc.20.128

• Engineering, Hebei University of Science and Technology, Shijiazhuang 050018, China 10.3762/bjoc.20.128 Abstract A series of 4-thio/seleno-cyanated pyrazoles was conveniently synthesized from 4-unsubstituted pyrazoles using NH4SCN/KSeCN as thio/selenocyanogen sources and PhICl2 as the hypervalent iodine

• , we have accomplished the synthesis of a series of C-4 thio/selenocyanated pyrazoles via a hypervalent iodine-mediated electrophilic thio/selenocyanation approach under mild reaction conditions. Furthermore, the obtained S/SeCN-containing pyrazoles can be converted to S/SeCF3- and S/SeMe-containing

Predicting bond dissociation energies of cyclic hypervalent halogen reagents using DFT calculations and graph attention network model

• Yingbo Shao,
• Zhiyuan Ren,
• Zhihui Han,
• Li Chen,
• Yao Li and
• Xiao-Song Xue

Beilstein J. Org. Chem. 2024, 20, 1444–1452, doi:10.3762/bjoc.20.127

• , University of Chinese Academy of Sciences, Shanghai 200032, P. R. China, School of Chemistry and Material Sciences, Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, Hangzhou 310024, P. R. China 10.3762/bjoc.20.127 Abstract Although hypervalent iodine(III) reagents have

• become staples in organic chemistry, the exploration of their isoelectronic counterparts, namely hypervalent bromine(III) and chlorine(III) reagents, has been relatively limited, partly due to challenges in synthesizing and stabilizing these compounds. In this study, we conduct a thorough examination of

• both homolytic and heterolytic bond dissociation energies (BDEs) critical for assessing the chemical stability and functional group transfer capability of cyclic hypervalent halogen compounds using density functional theory (DFT) analysis. A moderate linear correlation was observed between the

A comparison of structure, bonding and non-covalent interactions of aryl halide and diarylhalonium halogen-bond donors

• Nicole Javaly,
• Theresa M. McCormick and
• David R. Stuart

Beilstein J. Org. Chem. 2024, 20, 1428–1435, doi:10.3762/bjoc.20.125

• , monovalent, and hypervalent have been developed and studied. In this work we used density functional theory (DFT), natural bond orbital (NBO) theory, and quantum theory of atoms in molecules (QTAIM) to analyze aryl halogen-bond donors that are neutral, cationic, monovalent and hypervalent and in each series

• (Scheme 1a) [1][2][3][4]. Hypervalent halogen compounds, specifically diaryliodonium salts, have also been known to form Lewis acid–base adducts [9][10] and a relative scale to quantify this property has recently been reported [11][12]. Consequently, there has been a recent surge in the use of

• diarylhalonium salts in halogen-bonding catalysis [13][14][15][16][17][18][19]. Crabtree has outlined the similarity in molecular orbitals (MO) formed in halogen bonds and hypervalent bonds (and hydrogen bonds) [20]. Recently, we [21], and Legault and Huber [22], independently investigated the connection between

Hypervalent iodine-catalyzed amide and alkene coupling enabled by lithium salt activation

• Akanksha Chhikara,
• Fan Wu,
• Navdeep Kaur,
• Prabagar Baskaran,
• Alex M. Nguyen,
• Zhichang Yin,
• Anthony H. Pham and
• Wei Li

Beilstein J. Org. Chem. 2024, 20, 1405–1411, doi:10.3762/bjoc.20.122

• .20.122 Abstract Hypervalent iodine catalysis has been widely utilized in olefin functionalization reactions. Intermolecularly, the regioselective addition of two distinct nucleophiles across the olefin is a challenging process in hypervalent iodine catalysis. We introduce here a unique strategy using

• simple lithium salts for hypervalent iodine catalyst activation. The activated hypervalent iodine catalyst allows the intermolecular coupling of soft nucleophiles such as amides onto electronically activated olefins with high regioselectivity. Keywords: amide coupling; hypervalent iodine catalysis

• ; lithium salt activation; olefin oxyamination; oxazoline; Introduction Hypervalent iodine(III) reagents, also known as λ3–iodanes, have been well established and used in organic synthesis for the past decades [1][2][3][4][5]. The pioneering works of Fuchigami and Fugita, Ochiai, Kita, and later the

Oxidative hydrolysis of aliphatic bromoalkenes: scope study and reactivity insights

• Amol P. Jadhav and
• Claude Y. Legault

Beilstein J. Org. Chem. 2024, 20, 1286–1291, doi:10.3762/bjoc.20.111

• utilizing a hypervalent iodine-catalyzed oxidative hydrolysis reaction. This catalytic process provides both symmetrical and unsymmetrical dialkyl bromoketones with moderate yields across a broad range of bromoalkene substrates. Our studies also reveal the formation of Ritter-type side products by an

• alternative reaction pathway. Keywords: bromoalkenes; bromoketones; hypervalent iodine; oxidative hydrolysis; Ritter-type; Introduction Organic synthesis heavily relies on oxidative transformations to facilitate chemical reactions. One popular method for achieving these transformations is using redox-active

• metals, inspired by Nature's metalloproteins. However, using toxic and expensive metals is not always practical, making alternative oxidative methodologies more appealing. Enter hypervalent iodine reagents – a leading metal-free choice for oxidation reactions. These robust and low-toxicity reagents have

Auxiliary strategy for the general and practical synthesis of diaryliodonium(III) salts with diverse organocarboxylate counterions

• Naoki Miyamoto,
• Daichi Koseki,
• Kohei Sumida,
• Elghareeb E. Elboray,
• Naoko Takenaga,
• Ravi Kumar and
• Toshifumi Dohi

Beilstein J. Org. Chem. 2024, 20, 1020–1028, doi:10.3762/bjoc.20.90

• . This method allows for the hybridization of complex bioactive and fluorescent-labeled carboxylic acids with diaryliodonium(III) salts. Keywords: auxiliary ligand; diaryliodonium(III) salts; hybridization; hypervalent iodine; organocarboxylates; Introduction Hypervalent iodine compounds are an

• (TFE, Scheme 2B) [21]. Our group previously reported the synthesis of diaryliodonium(III) salts by combining hypervalent iodine(III) reagents with electron-rich arenes in fluoroalcohol solvents, such as TFE or 1,1,1,3,3,3-hexafluoro-2-propanol [21][22]. These solvents stabilize the cationic

• counterion exchange step. By employing TMP as an auxiliary aryl group, we have successfully achieved the reaction between the hypervalent iodine compounds (ArI(OAc)2 or ArIO) and 1,3,5-trimethoxybenzene in the presence of organocarboxylic acid under mild conditions. This process was completed in

Three-component N-alkenylation of azoles with alkynes and iodine(III) electrophile: synthesis of multisubstituted N-vinylazoles

• Jun Kikuchi,
• Roi Nakajima and
• Naohiko Yoshikai

Beilstein J. Org. Chem. 2024, 20, 891–897, doi:10.3762/bjoc.20.79

• group in the product can be leveraged as a versatile synthetic handle, allowing for the preparation of hitherto inaccessible types of densely functionalized N-vinylazoles. Keywords: alkynes; azoles; cross-coupling; hypervalent iodine; Introduction N-Functionalized azoles are prevalent in bioactive

(Bio)isosteres of ortho- and meta-substituted benzenes

• H. Erik Diepers and
• Johannes C. L. Walker

Beilstein J. Org. Chem. 2024, 20, 859–890, doi:10.3762/bjoc.20.78

• -cubanes (Scheme 9B) [51]. Partial deprotection of diester 88 led to acid 89 as a key intermediate and in situ activation of the acid as the hypervalent iodine complex enabled a photoredox decarboxylative amination to 1,2-cubane 90. Alternatively, conversion of the acid moiety of 89 to redox active esters

SOMOphilic alkyne vs radical-polar crossover approaches: The full story of the azido-alkynylation of alkenes

• Julien Borrel and
• Jerome Waser

Beilstein J. Org. Chem. 2024, 20, 701–713, doi:10.3762/bjoc.20.64

• high yield (72%) of the homopropargylic azide was reached. Full insights are given about the factors that were essential for the success of the optimization process. Keywords: alkyne; azide; hypervalent iodine; photoredox; trifluoroborate salt; Introduction Homopropargylic azides are important

• , greatly increasing the molecular complexity of the starting substrate. Using radical chemistry would lead to a regioselective addition of azide radicals to the alkene, forming selectively the most stabilized C-centered radical. A prominent method for the generation of azide radicals relies on hypervalent

• , entry 10). The addition of DABCO [18] or TBAI [50], two additives known to activate azidobenziodoxolone (ABX), afforded complex mixtures with no trace of 4a (Table 1, entry 11). Acids or fluorinated alcohols were tested to activate the different hypervalent iodine reagents. While AcOH, TFA and TFE had

Exploring the role of halogen bonding in iodonium ylides: insights into unexpected reactivity and reaction control

• Carlee A. Montgomery and
• Graham K. Murphy

Beilstein J. Org. Chem. 2023, 19, 1171–1190, doi:10.3762/bjoc.19.86

• -holes. Halogen bonding and σ-holes have been encountered in numerous monovalent and hypervalent iodine-containing compounds, and in 2022 σ-holes were computationally confirmed and quantified in the iodonium ylide subset of hypervalent iodine compounds. In light of this new discovery, this article

• -effect; Introduction Iodonium ylides are a subset of hypervalent iodine (HVI) reagents that were first reported in 1957 by Neiland [1]. These have since been investigated under a variety of thermal, photochemical, radical and transition metal-catalyzed conditions [2], and they have been successfully

• [27][28]. In 1953, the first instance of halogen bonding in a hypervalent iodine-containing molecule was reported [29], and this set the stage for decades of subsequent investigation. To fully understand halogen bonding, a thorough understanding of the properties of σ-hole bonding is necessary. A σ

Photoredox catalysis harvesting multiple photon or electrochemical energies

• Mattia Lepori,
• Simon Schmid and
• Joshua P. Barham

Beilstein J. Org. Chem. 2023, 19, 1055–1145, doi:10.3762/bjoc.19.81

Copper-catalyzed N-arylation of amines with aryliodonium ylides in water

• Kasturi U. Nabar,
• Bhalchandra M. Bhanage and
• Sudam G. Dawande

Beilstein J. Org. Chem. 2023, 19, 1008–1014, doi:10.3762/bjoc.19.76

• tuning of the ligand and base combinations [18][19]. Thereafter, copper-catalyzed C–N bond-formation reactions have experienced unprecedented development due to mild reaction conditions and the low cost of copper salts [20][21][22]. On the other hand, hypervalent iodine reagents serve as versatile tools

• in oxidation, C–C, C–X bond formation, rearrangements, and halogenation reactions [23][24][25]. Due to the nontoxic nature, easier preparation, and handling of the hypervalent iodine reagents, many researchers are attracted to unravel the chemistry and reactivity of these reagents. Amongst different

• types of hypervalent iodine reagents, diaryliodonium salts are commonly used reagents for the N-arylation of nitrogen-containing compounds, particularly for N-arylation of amines under catalyst-free conditions either in the presence of additives or at higher temperatures [26][27][28][29][30][31][32

Synthesis and reactivity of azole-based iodazinium salts

• Thomas J. Kuczmera,
• Annalena Dietz,
• Andreas Boelke and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2023, 19, 317–324, doi:10.3762/bjoc.19.27

• imidazoiodaziniums, we show highly delicate post-oxidation functionalizations retaining the hypervalent iodine center. Keywords: building block; heterocycles; hypervalent compounds; iodonium salts; one-pot synthesis; Introduction The chemistry of hypervalent iodine compounds, in particular aryl-λ3-iodanes, is

• chemistry of hypervalent iodine species in all their variety, particularly those containing N-heterocycles either as tethered stabilizing ligands or as an inclusive part of a cyclic iodonium salt [26][27][28][29][30][31]. We prepared five-membered, N-heterocycle-containing iodoliums 2 and investigated their

• iodonium center [43]. In this reaction, however, no complete conversion could be achieved, even by adding excess MeOTf. Inspired by the latter results, we were interested to investigate other post-oxidation functionalizations on the benzimidazole ring while keeping the highly reactive hypervalent iodine