Progress in the total synthesis of inthomycins

• Bidyut Kumar Senapati

Beilstein J. Org. Chem. 2021, 17, 58–82, doi:10.3762/bjoc.17.7

• , it was transformed into (E)-vinylboronate (+)-145b in perfect stereoselectivity by using the recently developed boron-Wittig reaction with bis[(pinacolato)boryl]methane (144) [79]. By applying the Corey–Fuchs dibromoolefination and followed by Pd-catalyzed hydrogenolysis under Uenishi's conditions

• [80], compound (Z)-(+)-143a delivered the bromodiene (Z,Z)-(+)-145a in good yield and stereoselectivity. Isomerization of (Z)-(+)-143a to (E)-(+)-143b was carried out successfully using sterically hindered base DBU or DABCO. Treatment of (E)-(+)-143b with 144 using the boron-Wittig reaction [79

All-carbon [3 + 2] cycloaddition in natural product synthesis

• Zhuo Wang and
• Junyang Liu

Beilstein J. Org. Chem. 2020, 16, 3015–3031, doi:10.3762/bjoc.16.251

• -mediated conjugated addition of methyllithium to enone 59 in the presence of boron trifluoride ether [34][35] produced desired ketone 60 in 75% yield. The resultant ketone 60 was converted to waihoensene (16) in two steps. Palladium-catalyzed carboxylative trimethylenemethane cycloaddition In 1986, Trost

Recent developments in enantioselective photocatalysis

• Callum Prentice,
• James Morrisson,
• Andrew D. Smith and
• Eli Zysman-Colman

Beilstein J. Org. Chem. 2020, 16, 2363–2441, doi:10.3762/bjoc.16.197

Chan–Evans–Lam N1-(het)arylation and N1-alkеnylation of 4-fluoroalkylpyrimidin-2(1H)-ones

• Viktor M. Tkachuk,
• Oleh O. Lukianov,
• Mykhailo V. Vovk,
• Isabelle Gillaizeau and
• Volodymyr A. Sukach

Beilstein J. Org. Chem. 2020, 16, 2304–2313, doi:10.3762/bjoc.16.191

• significant role in the generation of active copper-organic intermediates from boron-organic precursors [18][19][20]. Our interest in the development of N-arylation methods resonated with recent studies focused on the addition of various C-nucleophilic reagents to 4-trifluoromethylpyrimidin-2(1H)-ones I

The B & B approach: Ball-milling conjugation of dextran with phenylboronic acid (PBA)-functionalized BODIPY

• Patrizia Andreozzi,
• Lorenza Tamberi,
• Elisamaria Tasca,
• Gina Elena Giacomazzo,
• Marta Martinez,
• Mirko Severi,
• Marco Marradi,
• Stefano Cicchi,
• Sergio Moya,
• Giacomo Biagiotti and
• Barbara Richichi

Beilstein J. Org. Chem. 2020, 16, 2272–2281, doi:10.3762/bjoc.16.188

• phenylboronic acid (PBA)-functionalized boron dipyrromethene (BODIPY) applying the ball milling approach. The ball milling formation of boron esters between PBA BODIPY and dextran proved to be more efficient in terms of reaction time, amount of reactants, and labelling degree compared to the corresponding

• with small molecules, in a green and scalable process. Results and Discussion The boron dipyrromethene dye 1 bearing a phenylboronic acid moiety (PBA) at the meso position of the BODIPY core (Scheme 1) was prepared in four synthetic steps starting from 4-formylbenzeneboronic acid (2) and pyrrole (3

• conjugate (milled reaction) compared to a 0.61% w/w of 1 in the Dex-1a conjugate (conventional solution reaction) was obtained. The loading of 1 in both conjugates was also confirmed by inductively coupled plasma atomic emission spectroscopy (ICP-AES) analysis which showed in Dex-1b a boron content roughly

Synthetic approaches to bowl-shaped π-conjugated sumanene and its congeners

• Shakeel Alvi and
• Rashid Ali

Beilstein J. Org. Chem. 2020, 16, 2212–2259, doi:10.3762/bjoc.16.186

• ′-tetramethylethylenediamine (TMEDA) as shown in the Scheme 1. Having the compound 4 in hand, it was subjected to the cyclization in the presence of boron trifluoride to provide the tricyclohexyl-fused benzene derivative which on further dehydrogenation with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) afforded 1,5,9

The biomimetic synthesis of balsaminone A and ellagic acid via oxidative dimerization

• Sharna-kay Daley and
• Nadale Downer-Riley

Beilstein J. Org. Chem. 2020, 16, 2026–2031, doi:10.3762/bjoc.16.169

• FeCl3·SiO2. Treatment of the polyphenol with PIDA (1.5 equiv) in boron trifluoride etherate (1.5 mL) at room temperature proved to be the most successful dimerization protocol, as the dimeric precursor 19 was formed in 80% yield after 16 hours. The biaryl 19 was converted quantitatively to the natural

Controlling the stereochemistry in 2-oxo-aldehyde-derived Ugi adducts through the cinchona alkaloid-promoted electrophilic fluorination

• Yuqing Wang,
• Gaigai Wang,
• Anatoly A. Peshkov,
• Ruwei Yao,
• Muhammad Hasan,
• Manzoor Zaman,
• Chao Liu,
• Stepan Kashtanov,
• Olga P. Pereshivko and
• Vsevolod A. Peshkov

Beilstein J. Org. Chem. 2020, 16, 1963–1973, doi:10.3762/bjoc.16.163

• -triggered complexation with boron trifluoride diethyl etherate. The resulting O,O-chelated boron complexes 11 turned out to be strong solid-state emitters featuring clear aggregation-induced emission (AIE) characteristics [61]. Encouraged by these results, we decided to attempt the reaction of 2-oxo

Selective preparation of tetrasubstituted fluoroalkenes by fluorine-directed oxetane ring-opening reactions

• Clément Q. Fontenelle,
• Thibault Thierry,
• Romain Laporte,
• Emmanuel Pfund and
• Thierry Lequeux

Beilstein J. Org. Chem. 2020, 16, 1936–1946, doi:10.3762/bjoc.16.160

• resulted in slow solvolysis of alcohol 1d with acetic acid giving mainly the corresponding acetate (not shown). Product 1d was also obtained in a similar E/Z ratio (88:12) when the ring-opening reaction was performed in dichloromethane with tetrabutylammonium bromide (TBAB) as the bromide source and boron

• can be stopped at the alcohol stage when performed in the presence of BF3·Et2O instead of CSA to afford alkene Z-13 as the major product. The use of boron trifluoride etherate as an activator combined with TBAB afforded exclusively alkene Z-13 as evidenced by TLC, but after work-up, 22% of the

One-pot synthesis of isosorbide from cellulose or lignocellulosic biomass: a challenge?

• Isaline Bonnin,
• Raphaël Mereau,
• Thierry Tassaing and
• Karine De Oliveira Vigier

Beilstein J. Org. Chem. 2020, 16, 1713–1721, doi:10.3762/bjoc.16.143

• to sorbitol. Several homogeneous catalysts were used such as mineral acids, boron phosphate and heteropolyacids (Scheme 2). Palkovits et al. studied the combination of supported noble metal catalysts based on Pt, Pd and Ru with dilute mineral acids such as phosphoric or sulfuric acid for the

• showed that the acidity is important in the conversion of lignocellulosic biomass to isosorbide and that the acid can react with the metal-supported catalyst. Another study was devoted to the use of boron phosphate for the conversion of cellulose into liquid hydrocarbon C1–C6 over Ru/C [23]. A mixture of

• sorbitan from 29% to 22% and from 5% to 3%, respectively. A similar tendency was observed in the presence of boron phosphate. This was due to the slow dissolution of boron phosphate in aqueous solution implying a release of H+ according to reaction time. They also observe an increase of isosorbide

Models of necessity

• Timothy Clark and
• Martin G. Hicks

Beilstein J. Org. Chem. 2020, 16, 1649–1661, doi:10.3762/bjoc.16.137

• -throughput screening [71] are based on the occurrence of patterns within the Lewis structure. For chemists, the Lewis structure represents both metadata for AI/ML and an essential language for communication. However, like language, the Lewis model is context dependent (aromatic bonds, boron bonding…) and

Synthesis of new dihydroberberine and tetrahydroberberine analogues and evaluation of their antiproliferative activity on NCI-H1975 cells

• Giacomo Mari,
• Lucia De Crescentini,
• Serena Benedetti,
• Francesco Palma,
• Stefania Santeusanio and
• Fabio Mantellini

Beilstein J. Org. Chem. 2020, 16, 1606–1616, doi:10.3762/bjoc.16.133

• interest, the hydrazono-DHBERs 2a–n were further treated with 2.0 equivalents of sodium boron hydride at room temperature in methanol. The reaction furnishes the corresponding hydrazono-THBERs 3a–n in good yields (77–96%, Scheme 3). It is noteworthy that in these conditions, only the iminium moiety is

Photoredox-catalyzed silyldifluoromethylation of silyl enol ethers

• Vyacheslav I. Supranovich,
• Vitalij V. Levin and
• Alexander D. Dilman

Beilstein J. Org. Chem. 2020, 16, 1550–1553, doi:10.3762/bjoc.16.126

• silane is very sensitive to Lewis bases and accordingly it was used as a precursor of difluorocarbene, which can react with enol ethers [19][20] (Scheme 1). We showed that this silane could be involved in the radical chain hydrofluoroalkylation of electron-deficient alkenes, using a boron hydride as a

Synthesis of new fluorescent molecules having an aggregation-induced emission property derived from 4-fluoroisoxazoles

• Kazuyuki Sato,
• Akira Kawasaki,
• Yukiko Karuo,
• Atsushi Tarui,
• Kentaro Kawai and
• Masaaki Omote

Beilstein J. Org. Chem. 2020, 16, 1411–1417, doi:10.3762/bjoc.16.117

• synthesized and investigated for their photochemical properties. The introduction of a fluorine substituent into 3,5-diarylisoxazoles led to an increase of fluorescence intensity and exhibited a redshift in the emission intensity. α-Fluorinated boron ketoiminates (F-BKIs) were also synthesized via a ring

• -opening reaction of 4-fluoroisoxazoles and exhibited highly fluorescent luminescence and aggregation-induced emission (AIE), showing promise as a new fluorophore. Keywords: aggregation-induced emission; boron ketoiminates; fluorescent probe; α-fluorinated boron ketoiminates; 4-fluoroisoxazoles

• fluorescent luminescence characteristics of 4-fluoroisoxazoles, the synthesis of α-fluorinated boron ketoiminates (F-BKIs), and their photochemical properties. Results and Discussion Synthesis and optical properties of 4-fluorinated isoxazoles Although there is a large number of fluorescent molecules

Photocatalytic trifluoromethoxylation of arenes and heteroarenes in continuous-flow

• Alexander V. Nyuchev,
• Ting Wan,
• Borja Cendón,
• Carlo Sambiagio,
• Job J. C. Struijs,
• Michelle Ho,
• Moisés Gulías,
• Ying Wang and
• Timothy Noël

Beilstein J. Org. Chem. 2020, 16, 1305–1312, doi:10.3762/bjoc.16.111

• poor yields. Other synthetically useful substituents, including cyano, nitro, phenylsulphonyl, (pinacolato)boron, and alkyl groups could be tolerated in the reaction (24–30), leading to a yield range between 26 and 65%. The trifluoromethoxylation of pyridine, pyrimidine, and thiophene derivatives also

Fluorinated phenylalanines: synthesis and pharmaceutical applications

• Laila F. Awad and
• Mohammed Salah Ayoup

Beilstein J. Org. Chem. 2020, 16, 1022–1050, doi:10.3762/bjoc.16.91

• yields of 25–35% and with a radiochemical purity of more than 99%. The 18F-labeling of 4-borono-ᴅ,ʟ-phenylalanine (BPA) provided a potential tool for cancer treatment by boron neutron capture therapy [53] (Scheme 16). The syntheses of a variety of clinically relevant radiotracers including protected 4

• used in PET due to its relatively long half-life (109 min). In this section we highlight two selected 18FPhe derivatives which are used for PET tumor detection. 4-Borono-2-[18F]fluoro-ᴅ,ʟ-phenylalanine ([18F]FBPA, 70), is a fluorinated derivative of the parent compound designed for boron neutron

Suzuki–Miyaura cross coupling is not an informative reaction to demonstrate the performance of new solvents

• James Sherwood

Beilstein J. Org. Chem. 2020, 16, 1001–1005, doi:10.3762/bjoc.16.89

• the key fundamental principles of boron and palladium speciation and the role of the base in the Suzuki–Miyaura reaction. For researchers developing safer solvents, the Mizoroki–Heck reaction is a more suitable cross-coupling methodology to demonstrate solvent performance [28]. The reaction kinetics

Towards triptycene functionalization and triptycene-linked porphyrin arrays

• Gemma M. Locke,
• Keith J. Flanagan and
• Mathias O. Senge

Beilstein J. Org. Chem. 2020, 16, 763–777, doi:10.3762/bjoc.16.70

• investigated for its use as a rigid isolating unit in the synthesis of multichromophoric arrays. Sonogashira cross-coupling conditions are utilized to attach various porphyrins and boron dipyrromethenes (BODIPYs) to the triptycene scaffold. While there are previous examples of triptycene porphyrin complexes

Recent advances in Cu-catalyzed C(sp³)–Si and C(sp³)–B bond formation

• Balaram S. Takale,
• Ruchita R. Thakore,
• Elham Etemadi-Davan and
• Bruce H. Lipshutz

Beilstein J. Org. Chem. 2020, 16, 691–737, doi:10.3762/bjoc.16.67

• incorporating silicon or boron into new or existing drugs, in addition to their use as building blocks in cross-coupling reactions en route to various targets of both natural and unnatural origins. In this review, recent protocols relying on copper-catalyzed sp3 carbon–silicon and carbon–boron bond-forming

• boron can lead to dative bond formation with enzymes, and therefore increase binding affinity. As shown in Scheme 1, several silicon [9][10][11][12] and boron-containing [13][14][15][16] drugs have already entered the market, or are currently in the drug development pipeline. As the number of drugs

• with Suginome’s PhMe2Si-BPin [35] as a silicon pro-nucleophile (Scheme 11A) [36]. The mechanism followed the expected pathway involving transmetallation from boron to copper to form the corresponding Cu–Si species III. This intermediate then adds to the imine 45 to give intermediate IV, which after

Direct borylation of terrylene and quaterrylene

• Haruka Kano,
• Keiji Uehara,
• Kyohei Matsuo,
• Hironobu Hayashi,
• Hiroko Yamada and
• Naoki Aratani

Beilstein J. Org. Chem. 2020, 16, 621–627, doi:10.3762/bjoc.16.58

• highest band of terrylene at 553 nm is mainly caused by transition from HOMO (−4.59 eV) to LUMO (−2.30 eV) (oscillator strength, f = 0.76). Although the frontier MOs for TB4 are overall destabilized due to the smaller electronegativity of boron, the impact of substituents to the HOMO and LUMO

Regioselectively α- and β-alkynylated BODIPY dyes via gold(I)-catalyzed direct C–H functionalization and their photophysical properties

• Takahide Shimada,
• Shigeki Mori,
• Masatoshi Ishida and
• Hiroyuki Furuta

Beilstein J. Org. Chem. 2020, 16, 587–595, doi:10.3762/bjoc.16.53

• -materials. Keywords: alkynylation; BODIPY; direct C–H functionalization; gold(I); Introduction Boron-dipyrromethene (BODIPY, 1) and its derivatives are representative families of fluorophores that have been widely used in applications for bioimaging [1][2][3][4][5][6], photodynamic therapy [7][8][9][10

• prepared regioselectively, through the C–H alkynylation of 1 without any directing groups. In addition, the corresponding dipyrromethane 2, which is a precursor of BODIPY, was first transformed into the alkynylated form under catalytic conditions, and subsequent oxidation followed by boron complexation to

• mixture was treated with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) to give the α,α'-diethynyl-substituted dipyrrin 7a. Subsequent boron complexation in the presence of trimethylsilyl chloride (TMSCl) as a fluoride scavenger afforded 4a in 16% yield over three steps. Separately, α-ethynyl

Six-fold C–H borylation of hexa-peri-hexabenzocoronene

• Mai Nagase,
• Kenta Kato,
• Akiko Yagi,
• Yasutomo Segawa and
• Kenichiro Itami

Beilstein J. Org. Chem. 2020, 16, 391–397, doi:10.3762/bjoc.16.37

• 50% probability; all hydrogen atoms and solvent molecules (pentane) are omitted for clarity; gray: carbon; olive green: boron; red: oxygen. (b) Side view of 1. (c) Packing mode of 1. Photophysical properties of 1. (a) UV–vis absorption (solid lines) spectra, fluorescence (dotted line) spectrum

Architecture and synthesis of P,N-heterocyclic phosphine ligands

• Wisdom A. Munzeiwa,
• Bernard Omondi and
• Vincent O. Nyamori

Beilstein J. Org. Chem. 2020, 16, 362–383, doi:10.3762/bjoc.16.35

• 57. Coupling of 57 with Ph2PCl·BH3 resulted in the boron-protected ligand 58, which was deprotected with Et3N. Alternatively, 1,1’-bis(diphenylphosphino)ferrocene (dppf) with palladium(II) acetate was used to catalyze the reduction of 55 generating the pyridine scaffold 57. Subsequent lithiation and

Copper-catalyzed enantioselective conjugate addition of organometallic reagents to challenging Michael acceptors

• Delphine Pichon,
• Jennifer Morvan,
• Christophe Crévisy and
• Marc Mauduit

Beilstein J. Org. Chem. 2020, 16, 212–232, doi:10.3762/bjoc.16.24

• ]. Indeed, due to their poor reactivity compared to other Michael acceptors, catalytic asymmetric conjugate additions of organometallic reagents to N,N-dialkylenamides remained a real challenge. However, thanks to the synergistic action of the boron-based Lewis acid BF3∙Et2O, CuBr∙SMe2, and the chiral (R,S

Efficient method for propargylation of aldehydes promoted by allenylboron compounds under microwave irradiation

• Jucleiton J. R. Freitas,
• Queila P. S. B. Freitas,
• Silvia R. C. P. Andrade,
• Juliano C. R. Freitas,
• Roberta A. Oliveira and
• Paulo H. Menezes

Beilstein J. Org. Chem. 2020, 16, 168–174, doi:10.3762/bjoc.16.19

• were obtained in short reaction time, high yield and purity without the need of any solvent when allenylboronic acid pinacol ester was used, or using a minimal amount of acetone when potassium allenyltrifluoroborate was used. Keywords: boron compounds; microwave; propargylation; regioselectivity

• ] or boron [26][27][28] to perform propargylation reactions typically requires catalysis by Lewis acids or bases and although the utility of allenylstannanes is further indicated by the commercial availability of some of them, the toxicity of these compounds makes them inappropriate for the use in

• lower yields or the decomposition of the boron reagent 1 (Table 1, entries 3 and 4). It is worth to note that when the reaction was carried out with conventional heating (100 °C), the desired product was not observed after 1 h. A similar behavior was previously observed by Schaus [32]. Next, the