Electrocatalytic C(sp³)–H/C(sp)–H cross-coupling in continuous flow through TEMPO/copper relay catalysis

• Bin Guo and
• Hai-Chao Xu

Beilstein J. Org. Chem. 2021, 17, 2650–2656, doi:10.3762/bjoc.17.178

• terminal alkynes has been achieved in a continuous-flow microreactor through 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO)/copper relay catalysis. The reaction is easily scalable and requires low concentration of supporting electrolyte and no external chemical oxidants or ligands, providing straightforward

• and sustainable access to 2-functionalized tetrahydroisoquinolines. Keywords: continuous flow; copper; catalysis; dehydrogenative cross-coupling; electrochemistry; Introduction The dehydrogenative cross-coupling of two C–H bonds represents an ideal strategy for the construction of C–C bonds [1][2

• reaction of tetrahydroisoquinolines with terminal alkynes (Scheme 1C) [10]. The chiral ligand was found to be critical for the stereoinduction as well as product formation for these electrochemical reactions that are conducted in batch. Continuous-flow electrochemical microreactors offer several advantages

Photoredox catalysis in nickel-catalyzed C–H functionalization

• Lusina Mantry,
• Rajaram Maayuri,
• Vikash Kumar and
• Parthasarathy Gandeepan

Beilstein J. Org. Chem. 2021, 17, 2209–2259, doi:10.3762/bjoc.17.143

• process in a continuous-flow reactor. The mechanistic studies indicated that a nickel hydride intermediate generated with C(sp3)–H as the hydride source is involved in this catalytic transformation. The hydronickelation step results in the sterically less hindered vinylnickel intermediate 15-I, which

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

• temperatures, fragrance ingredients/intermediates make ideal candidates for continuous-flow manufacturing. This review highlights the potential crossover between a multibillion dollar industry and the flourishing sub-field of flow chemistry evolving within the discipline of organic synthesis. This is

• investment to maintain and operate (requirements for large volumes of solvent during work-ups and cleaning of reactors between processes). Alternatively, in the continuous-flow approach, a fully automated reaction system can be assembled, in which, transformations occur within reactors with a continuous

• flow [86]. Due to the inherently low active volumes of reactants that are processed in the reaction zone within a continuous-flow reactor, the safety risks associated with critical event are greatly diminished. In addition, process reliance and sustainability are further improved by adding extra safety

Recent advances in palladium-catalysed asymmetric 1,4–additions of arylboronic acids to conjugated enones and chromones

• Jan Bartáček,
• Jan Svoboda,
• Martin Kocúrik,
• Jaroslav Pochobradský,
• Alexander Čegan,
• Miloš Sedlák and
• Jiří Váňa

Beilstein J. Org. Chem. 2021, 17, 1048–1085, doi:10.3762/bjoc.17.84

• , continuous-flow reactions are currently a general challenge, especially for the pharmaceutical industry. The prerequisite for a successful continuous synthesis in the field of asymmetric addition reactions to enones is the mastery of recyclable heterogeneous catalysis. Very recently, we reported [57] the

• is another challenging task. Nevertheless, it should be noted at this point that in the case of rhodium complex catalysis, the asymmetric addition of phenylboronic acid to enones in continuous flow has been successful [24]. In 2021, Walhers et al. presented a theoretical study based on the Q2MM

Microwave-assisted multicomponent reactions in heterocyclic chemistry and mechanistic aspects

• Shivani Gulati,
• Stephy Elza John and
• Nagula Shankaraiah

Beilstein J. Org. Chem. 2021, 17, 819–865, doi:10.3762/bjoc.17.71

• seems to be compromised imposing restrictions on using microwaves at a scale-up level. However, the batch process and continuous flow process seem to provide an entry into scale-up standards with safety. The microwave reactors serving the purpose of batch and parallel approach are designed in various

Synthesis of trifluoromethyl ketones by nucleophilic trifluoromethylation of esters under a fluoroform/KHMDS/triglyme system

• Yamato Fujihira,
• Yumeng Liang,
• Makoto Ono,
• Kazuki Hirano,
• Takumi Kagawa and
• Norio Shibata

Beilstein J. Org. Chem. 2021, 17, 431–438, doi:10.3762/bjoc.17.39

• equivalents of KHMDS. Further application of this “batch protocol” for a “continuous-flow microreactor” reaction is now ongoing in our laboratory towards industrial collaboration. Experimental A test tube containing 1 (0.4 mmol) in triglyme (0.7 mL) was charged with HCF3 (9.9 mL, 1.1 equiv, measured by a

Coupling biocatalysis with high-energy flow reactions for the synthesis of carbamates and β-amino acid derivatives

• Alexander Leslie,
• Thomas S. Moody,
• Megan Smyth,
• Scott Wharry and
• Marcus Baumann

Beilstein J. Org. Chem. 2021, 17, 379–384, doi:10.3762/bjoc.17.33

• within continuous flow processes [17][18][19][20] to provide a greener and more chemoselective means for the synthesis of drug-like targets. Recently, we reported on an innovative telescoped process using immobilized CALB (Candida antarctica lipase B) to enable the conversion of residual benzyl alcohol

• into benzyl butyrate in view of facilitating the downstream purification of continuous flow Curtius rearrangement reactions [21]. In this paper, we will give a full account on this valuable approach and showcase the utility of the carbamate products towards generating sets of β-amino acid species

• innovative approach (85% yield, for details see [21]). To further exploit the value of this continuous flow approach the possibility of converting selected carbamate products into derivatives of β-amino acids (e.g., 8) was evaluated. Although this may be achieved by a conventional alkylation of the carbamate

A sustainable strategy for the straightforward preparation of 2H-azirines and highly functionalized NH-aziridines from vinyl azides using a single solvent flow-batch approach

• Michael Andresini,
• Leonardo Degannaro and
• Renzo Luisi

Beilstein J. Org. Chem. 2021, 17, 203–209, doi:10.3762/bjoc.17.20

• risks [6]. Recently, a variety of sustainable solvents has been therefore identified, and their use have been combined with those of enabling technologies. In this scenario, the development of continuous flow synthetic methodologies has found its fortune in the past two decades [7][8][9]. Several

• ]. Similarly, Maurya developed a microfluidic photoreactor for the synthesis of a fused β-carboline from an α-ketovinyl azide and a 1,2,3,4-tetrahydro-β-carboline (Scheme 1b) [30]. More recently, Kappe reported the generation of 2H-azirines under continuous flow conditions, and their transformation into

• ]. Subsequently, the process was examined under continuous flow conditions employing a special integrated coil reactor with two different operating temperatures (see Supporting Information File 1). A solution of 1-(1-azidovinyl)-4-methylbenzene (1a, 0.25 M in CPME) was introduced, via a high pressure syringe pump

Dawn of a new era in industrial photochemistry: the scale-up of micro- and mesostructured photoreactors

• Emine Kayahan,
• Mathias Jacobs,
• Leen Braeken,
• Leen C.J. Thomassen,
• Simon Kuhn,
• Tom van Gerven and
• M. Enis Leblebici

Beilstein J. Org. Chem. 2020, 16, 2484–2504, doi:10.3762/bjoc.16.202

• designing multiphase photoreactors, and this complicates the design even further [10]. Photoreactions are typically performed in batch reactors. With the process intensification efforts towards green chemistry approaches, continuous flow technologies, micro- and mesostructured flow photoreactors having

Photosensitized direct C–H fluorination and trifluoromethylation in organic synthesis

• Shahboz Yakubov and
• Joshua P. Barham

Beilstein J. Org. Chem. 2020, 16, 2151–2192, doi:10.3762/bjoc.16.183

• to the 83% yield under the standard conditions. This reaction was also demonstrated in continuous flow under similar conditions [139]. 3.2 Polarity matching-guided unactivated C(sp3)–H fluorination 3.2.1 Synthetic applications: In another seminal paper, Tan and co-workers [198] discovered the

Synergy between supported ionic liquid-like phases and immobilized palladium N-heterocyclic carbene–phosphine complexes for the Negishi reaction under flow conditions

• Edgar Peris,
• Raúl Porcar,
• María Macia,
• Jesús Alcázar,
• Eduardo García-Verdugo and
• Santiago V. Luis

Beilstein J. Org. Chem. 2020, 16, 1924–1935, doi:10.3762/bjoc.16.159

• , Janssen-Cilag, S.A., C/ Jarama 75A, Toledo, Spain 10.3762/bjoc.16.159 Abstract The combination of supported ionic liquids and immobilized NHC–Pd–RuPhos led to active and more stable systems for the Negishi reaction under continuous flow conditions than those solely based on NHC–Pd–RuPhos. The fine tuning

• under continuous flow conditions. Results and Discussion Scheme 1 summarizes the synthetic approach used for the preparation of the functionalized polymers considered in this work. A commercially available PS-DVB bead-type macroporous chloromethylated polymer 1 (Merrifield resin with 20% DVB and 1.2

• palladium species as calculated by ICP–MS of the respective solutions (>15 ppm of Pd). The elemental analysis of the catalyst after its use was also consistent with this Pd loss from the NHC complex. Additionally, the catalyst 8a was also tested under continuous flow conditions. Although, this time a

When metal-catalyzed C–H functionalization meets visible-light photocatalysis

• Lucas Guillemard and
• Joanna Wencel-Delord

Beilstein J. Org. Chem. 2020, 16, 1754–1804, doi:10.3762/bjoc.16.147

• photochemical reactions due to the inherent lack of scalability issues as a consequence of the Beer–Lambert law of absorption. Consequently, continuous-flow chemistry represents one of the few ways in which pharmaceutically relevant quantities of compounds can be synthesized through photoinduced transformations

• ]. Targeting more sustainable protocols, a manganese catalyst was selected to trigger the coupling between an aryldiazonium salt and simple (hetero)aryls. A unique reactivity was obtained under irradiation with blue LEDs and a continuous-flow process allowed achieving higher reactivity. Under the optimized

• heteroarene coupling partners. Indeed, furans, thiophenes, and pyrroles underwent selectively the non-directed C–H functionalization, delivering a diversity of heteroaryl–aryl coupling products. Remarkably, the continuous-flow technique rendered this transformation perfectly suited for large-scale and rapid

One-pot synthesis of isosorbide from cellulose or lignocellulosic biomass: a challenge?

• Isaline Bonnin,
• Raphaël Mereau,
• Thierry Tassaing and
• Karine De Oliveira Vigier

Beilstein J. Org. Chem. 2020, 16, 1713–1721, doi:10.3762/bjoc.16.143

• this reaction under continuous flow using two catalytic beds. Finally, we emphasize that mechanistic insights on the catalytic conversion of biomass-derived platform molecules are required to make this value chain competitive with respect to the traditional synthesis of chemicals from fossil fuels. In

Heterogeneous photocatalysis in flow chemical reactors

• Christopher G. Thomson,
• Ai-Lan Lee and
• Filipe Vilela

Beilstein J. Org. Chem. 2020, 16, 1495–1549, doi:10.3762/bjoc.16.125

• Christopher G. Thomson Ai-Lan Lee Filipe Vilela Institute of Chemical Sciences, School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh, EH14 4AS Scotland, United Kingdom 10.3762/bjoc.16.125 Abstract The synergy between photocatalysis and continuous flow chemical reactors

• irradiation. Herein, we review some important developments of heterogeneous photocatalytic materials and their application in flow reactors for sustainable organic synthesis. Further, the application of continuous flow heterogeneous photocatalysis in environmental remediation is briefly discussed to present

• demonstrated the safe use of gaseous CF3I as a reagent for the continuous flow PRC trifluoromethylation of 5-membered heterocycles, such as N-methylpyrrole (1, Scheme 1), with a high conversion and selectivity for the monofunctionalised product 2 [62]. The system achieved full conversion for a variety of

An overview on disulfide-catalyzed and -cocatalyzed photoreactions

• Yeersen Patehebieke

Beilstein J. Org. Chem. 2020, 16, 1418–1435, doi:10.3762/bjoc.16.118

• -membered keto ester derivatives did not show any desired reaction. In combination with a continuous-flow strategy, this disulfide-catalyzed aerobic oxidation process can be scaled up to a gram-scale. A plausible mechanism of the reaction is shown in Scheme 11. The hydroxylation starts with the formation of

Disposable cartridge concept for the on-demand synthesis of turbo Grignards, Knochel–Hauser amides, and magnesium alkoxides

• Mateo Berton,
• Kevin Sheehan,
• Andrea Adamo and
• D. Tyler McQuade

Beilstein J. Org. Chem. 2020, 16, 1343–1356, doi:10.3762/bjoc.16.115

• batch-to-batch variability. Tubular reactors of solid reagents combined with solution-phase reagents enable the continuous-flow preparation of organomagnesium reagents. The use of stratified packed-bed columns of magnesium metal and lithium chloride for the synthesis of highly concentrated turbo

• lithium chloride separated with fiberglass for the turbo Grignard reagent synthesis. Steady-state concentration stability during the conversion of iPrCl in THF (56 mL, 2.2 M) into iPrMgCl·LiCl (50 mL, 1.91 M) using two perfluorinated disposable monocomponent tubular reactors. Continuous flow synthesis of

• TMPMgCl⋅LiCl with a stratified packed-bed column of activated magnesium and lithium chloride. Continuous flow synthesis of TMPMgCl⋅LiBr with a stratified packed-bed column of activated magnesium and lithium bromide. Continuous flow synthesis of t-AmylOMgCl⋅LiCl with a stratified packed-bed column of

Photocatalytic trifluoromethoxylation of arenes and heteroarenes in continuous-flow

• Alexander V. Nyuchev,
• Ting Wan,
• Borja Cendón,
• Carlo Sambiagio,
• Job J. C. Struijs,
• Michelle Ho,
• Moisés Gulías,
• Ying Wang and
• Timothy Noël

Beilstein J. Org. Chem. 2020, 16, 1305–1312, doi:10.3762/bjoc.16.111

• , Road, North Chicago, Illinois 60064, United States of America 10.3762/bjoc.16.111 Abstract The first example of photocatalytic trifluoromethoxylation of arenes and heteroarenes under continuous-flow conditions is described. Application of continuous-flow microreactor technology allowed to reduce the

• residence time up to 16 times in comparison to the batch procedure, while achieving similar or higher yields. In addition, the use of inorganic bases was demonstrated to increase the reaction yield under batch conditions. Keywords: C–H functionalization; continuous-flow; organic synthesis; photoredox

• photoredox protocols for the radical trifluoromethoxylation of unfunctionalized (hetero)arenes by using specifically designed CF3O radical-releasing agents (Scheme 1B). Following our long-standing interest in the development of continuous-flow approaches for C–H functionalization [18][26] and photochemical

Synthesis of esters of diaminotruxillic bis-amino acids by Pd-mediated photocycloaddition of analogs of the Kaede protein chromophore

• Esteban P. Urriolabeitia,
• Pablo Sánchez,
• Alexandra Pop,
• Cristian Silvestru,
• Eduardo Laga,
• Ana I. Jiménez and
• Carlos Cativiela

Beilstein J. Org. Chem. 2020, 16, 1111–1123, doi:10.3762/bjoc.16.98

• source and a Q-ToF mass analyzer. Acetonitrile and methanol were used as solvents. Samples were introduced at a continuous flow of 0.2 mL/min, and nitrogen served both as the nebulizer gas and the dry gas. Infrared spectra were recorded on a Spectrum 100 Perkin-Elmer FTIR spectrophotometer, with a

Recent applications of porphyrins as photocatalysts in organic synthesis: batch and continuous flow approaches

• Rodrigo Costa e Silva,
• Luely Oliveira da Silva,
• Aloisio de Andrade Bartolomeu,
• Timothy John Brocksom and
• Kleber Thiago de Oliveira

Beilstein J. Org. Chem. 2020, 16, 917–955, doi:10.3762/bjoc.16.83

• conjugated photosensitizers show increasing potential in photocatalysis since they combine both photo- and electrochemical properties which can substitute available metalloorganic photocatalysts. Batch and continuous-flow approaches are presented highlighting the relevance of enabling technologies for the

• ) [1][2][3]. This effect limits the penetration of photons to only a short distance into the reaction vessel, provoking increases of the reaction time, photocatalyst loading, byproducts, overheating and so on. Notably, the use of continuous-flow reactors for photochemical applications allows us to

• continuous-flow photochemistry a sustainable alternative approach being applied already by the chemical and pharmaceutical industries. Porphyrinoid is the term given for a class of organic compounds containing four pyrrole rings connected by four methylene bridges, and include porphyrin, chlorin

A method to determine the correct photocatalyst concentration for photooxidation reactions conducted in continuous flow reactors

• Clemens R. Horn and
• Sylvain Gremetz

Beilstein J. Org. Chem. 2020, 16, 871–879, doi:10.3762/bjoc.16.78

• centered on the combination of light with continuous flow reactors [1][2][3][4][5][6]. The reason for this increased interest is that continuous flow photochemical reactors can overcome various limitations that occur when the same reaction run in batch reactors [7]. For example, the flow reactor can

Combining enyne metathesis with long-established organic transformations: a powerful strategy for the sustainable synthesis of bioactive molecules

• Valerian Dragutan,
• Ileana Dragutan,
• Albert Demonceau and
• Lionel Delaude

Beilstein J. Org. Chem. 2020, 16, 738–755, doi:10.3762/bjoc.16.68

• peroxide bridge, has been subject of extensive scientific investigations during the last decade [53][54][55][56][57][58][59][60][61][62][63]. In this context, Seeberger and co-workers successfully developed an ingenious continuous-flow process for the hemisynthesis of pure artemisinin from

Synthesis of disparlure and monachalure enantiomers from 2,3-butanediacetals

• Adam Drop,
• Hubert Wojtasek and
• Bożena Frąckowiak-Wojtasek

Beilstein J. Org. Chem. 2020, 16, 616–620, doi:10.3762/bjoc.16.57

• -2,3-Disubstituted butanediacetal derivatives of dimethyl tartrates 9–11 can be converted to cis-isomers 12–14 (Scheme 2) [32]. Compound 12 can be obtained from trans-dimethyl ester 9 in a two-step procedure either following a traditional way or using continuous flow chemistry [32][33][34]. The

KOt-Bu-promoted selective ring-opening N-alkylation of 2-oxazolines to access 2-aminoethyl acetates and N-substituted thiazolidinones

• Qiao Lin,
• Shiling Zhang and
• Bin Li

Beilstein J. Org. Chem. 2020, 16, 492–501, doi:10.3762/bjoc.16.44

• synthesis of β-nitrate ester carboxamides using tert-butyl nitrite as the nitro source and oxygen as the oxidant through the ring opening of 2-oxazolines [9] (Scheme 1a). Kappe reported a two-step continuous-flow synthesis of N-(2-aminoethyl)acylamides through ring opening/hydrogenation of oxazolines with

Recent advances in photocatalyzed reactions using well-defined copper(I) complexes

• Mingbing Zhong,
• Xavier Pannecoucke,
• Philippe Jubault and
• Thomas Poisson

Beilstein J. Org. Chem. 2020, 16, 451–481, doi:10.3762/bjoc.16.42

• moderate to good yields. Notably, alkyl iodides were also suitable substrates. The methodology proved to be compatible with a broad range of functional groups. To demonstrate the synthetic utility of the process, the reaction was developed under continuous flow conditions to afford an easy and

• synthesized in 57% yield. Importantly, the reaction scale was increased to 1 g under continuous flow conditions. Then, the reaction was extended to the cyclization of a stilbene derivative into phenanthrene in a moderate 23% isolated yield. To explain the reaction pathway, the authors suggested an oxidative

• mechanism. One year later, 2013, Collins and co-workers extended this concept to the synthesis of carbazole derivatives under continuous flow conditions (Scheme 30) [44]. Using, the [Cu(I)(dmp)(xantphos)]BF4 catalyst, the oxidative cyclization of various triarylamines was carried out in the presence of I2

Synthesis of 3-alkenylindoles through regioselective C–H alkenylation of indoles by a ruthenium nanocatalyst

• Abhijit Paul,
• Debnath Chatterjee,
• Srirupa Banerjee and
• Somnath Yadav

Beilstein J. Org. Chem. 2020, 16, 140–148, doi:10.3762/bjoc.16.16

• ]. Noël and co-workers reported the C3–H olefination of indoles using Pd(OAc)2 as a catalyst and molecular oxygen as the oxidant under continuous flow conditions [29]. Jia et al. reported the synthesis of 3-alkenylindoles using Pd(OAc)2 as the catalyst and MnO2 as the oxidant under ball milling conditions