In-depth characterization of self-healing polymers based on π–π interactions

• Josefine Meurer,
• Julian Hniopek,
• Johannes Ahner,
• Michael Schmitt,
• Jürgen Popp,
• Stefan Zechel,
• Kalina Peneva and
• Martin D. Hager

Beilstein J. Org. Chem. 2021, 17, 2496–2504, doi:10.3762/bjoc.17.166

• of Photonic Technology (IPHT), e. V. Jena, Albert-Einstein-Straße 9, 07745 Jena, Germany 10.3762/bjoc.17.166 Abstract The self-healing behavior of two supramolecular polymers based on π–π-interactions featuring different polymer backbones is presented. For this purpose, these polymers were

• behavior as well as the in-depth characterization of the molecular behavior and the macroscopic properties, which reveals new insights into the self-healing materials based on π–π interactions. Results and Discussion Polymer synthesis For the synthesis of supramolecular polymers based on π-π interactions a

• molar mass of approximately 2000 g/mol resulting in polymer P1. In order to study the influence of the polymer backbone on the material’s properties, the diamine containing polymer was exchanged to a triblock copolymer of poly(propylene glycol)-block-poly(ethylene glycol)-block-poly(propylene glycol

Exfoliated black phosphorous-mediated CuAAC chemistry for organic and macromolecular synthesis under white LED and near-IR irradiation

• Azra Kocaarslan,
• Zafer Eroglu,
• Önder Metin and
• Yusuf Yagci

Beilstein J. Org. Chem. 2021, 17, 2477–2487, doi:10.3762/bjoc.17.164

• , Turkey King Abdulaziz University, Faculty of Science, Chemistry Department, 21589 Jeddah, Saudi Arabia 10.3762/bjoc.17.164 Abstract The development of long-wavelength photoinduced copper-catalyzed azide–alkyne click (CuAAC) reaction routes is attractive for organic and polymer chemistry. In this study

• has set a milestone as a new and effective method for the synthesis of macromolecules [11]. Initiation of this reaction photocatalytically provides many advantages for the synthetic methodologies including bioconjugation, labeling, surface functionalization, dendrimer synthesis, polymer synthesis, and

• polymer modification by adding spatial and temporal control [12][13]. In recent years, heterogeneous photocatalysts have been performed in many photosynthetic reactions since they provide a more reasonable and easy way to synthesize the targeted products compared to the classical homogenous photocatalysts

Post-functionalization of drug-loaded nanoparticles prepared by polymerization-induced self-assembly (PISA) with mitochondria targeting ligands

• Janina-Miriam Noy,
• Fan Chen and
• Martina Stenzel

Beilstein J. Org. Chem. 2021, 17, 2302–2314, doi:10.3762/bjoc.17.148

• -((phenylcarbonothioyl)thio)pentanoic acid, but it was modified with ethylene glycol. During the polymerization of the water-soluble polymers, fluorescein O-methacrylate was added at a ratio of CTA to fluorescent monomer of 1:0.3. This means more that three out of ten polymer chains will be labelled, which is sufficient

• for cell work. The water-soluble polymer was then chain-extended via PISA using MMA at a various feed ratio of MMA and RAFT agent using earlier procedures [42], resulting in nanoparticles with hydroxy functionalities located on the surface. In earlier studies it was observed that shorter MPC blocks

• ppm was used. As the polymer has 63 PEGMEMA repeating units, the intensity of this peak is 189, which should be equivalent to the 15 aromatic peaks of TPP. This signal overlaps with 7 × 4 aromatic peaks belonging to PENAO. Care needs to be taken here as this is also the region of the aromatic group of

Chemical syntheses and salient features of azulene-containing homo- and copolymers

• Vijayendra S. Shetti

Beilstein J. Org. Chem. 2021, 17, 2164–2185, doi:10.3762/bjoc.17.139

• photovoltaic (PV) cells. Since azulene has a fused five and seven-membered ring structure, it can be incorporated onto the polymer backbone through either of these rings or by involving both the rings. These azulene-connection patterns can influence the properties of the resulting polymers and the chemical

• chemical and electrochemical means. Through electrochemical methods, only the five-membered rings can be incorporated onto the polymer backbone, and often the polymers produced are insoluble [17]. On the other hand, chemical synthesis provides an avenue to synthesize soluble polymers where azulene can be

• incorporated into the backbone through either of the rings or by involving both the rings. These substitution patterns can influence the property of the resulting polymer. However, to achieve the synthesis of such homo- and copolymers, suitably tailor-made azulene monomers with specific substitution patterns

Constrained thermoresponsive polymers – new insights into fundamentals and applications

• Patricia Flemming,
• Alexander S. Münch,
• Andreas Fery and
• Petra Uhlmann

Beilstein J. Org. Chem. 2021, 17, 2123–2163, doi:10.3762/bjoc.17.138

• , have been intensively studied in solution. For the application of such polymers in novel sensors, drug delivery systems or as multifunctional coatings, they typically have to be transferred into specific arrangements, such as micelles, polymer films or grafted nanoparticles. However, it turns out that

• the thermodynamic concept for the phase transition of free polymer chains fails, when thermoresponsive polymers are assembled into such sterically confined architectures. Whereas many published studies focus on synthetic aspects as well as individual applications of thermoresponsive polymers, the

• representative. In contrast, for polymer arrangements with an upper critical solution temperature (UCST), there is only limited knowledge about preparation, application and precise physical understanding of the phase transition. This review article provides an overview about the current knowledge of

An initiator- and catalyst-free hydrogel coating process for 3D printed medical-grade poly(ε-caprolactone)

• Jochen Löblein,
• Thomas Lorson,
• Miriam Komma,
• Tobias Kielholz,
• Maike Windbergs,
• Paul D. Dalton and
• Robert Luxenhofer

Beilstein J. Org. Chem. 2021, 17, 2095–2101, doi:10.3762/bjoc.17.136

• Jochen Loblein Thomas Lorson Miriam Komma Tobias Kielholz Maike Windbergs Paul D. Dalton Robert Luxenhofer Polymer Functional Materials, Chair for Advanced Materials Synthesis, Institute for Functional Materials and Biofabrication, Department of Chemistry and Pharmacy, Julius-Maximilians

• nm to 10 µm) and micro-scale filaments onto a collector with repeat fiber deposition to build up a micro-scale 3D object, with build heights in the range of several millimeters [9][10][11]. In MEW, the polymer jet is electrostatically drawn from a nozzle, resulting in a considerable reduction of the

• mechanical properties, cytocompatibility, biodegradability, and good printing properties [8][14][15], it is a hydrophobic polymer and immersion into fluids can result in air bubble capture within the scaffold structure, biofouling and non-specific cell interactions [16]. Protein adsorption and denaturation

Towards new NIR dyes for free radical photopolymerization processes

• Haifaa Mokbel,
• Guillaume Noirbent,
• Didier Gigmes,
• Frédéric Dumur and
• Jacques Lalevée

Beilstein J. Org. Chem. 2021, 17, 2067–2076, doi:10.3762/bjoc.17.133

• abilities were found for some reported dyes when used in combination with iodonium salt and amine. Markedly, photothermal effects with a huge heater behavior were also observed for different NIR dye structures. Interestingly, the synthesis of interpenetrating polymer networks (IPNs, e.g., for the

• filled samples can be potentially used for composite materials and/or adhesives. Both photochemical and photothermal NIR approaches were proposed to initiate polymerization, e.g., for free-radical processes, interpenetrating polymer network (IPN) synthesis, or photopolyaddition reactions [3][4][6][7][8

• -component systems can also be used for the preparation of IPNs through the polymerization of acrylate/epoxy monomer blends (3,4-epoxycyclohexylmethyl-3,4-epoxycyclohexane carboxylate from Allnex was used as benchmark epoxy monomer) [20]. The formation of IPNs can be highly worthwhile to reach better polymer

Progress and challenges in the synthesis of sequence controlled polysaccharides

• Giulio Fittolani,
• Theodore Tyrikos-Ergas,
• Denisa Vargová,
• Manishkumar A. Chaube and
• Martina Delbianco

Beilstein J. Org. Chem. 2021, 17, 1981–2025, doi:10.3762/bjoc.17.129

• be quite challenging to prepare. Moreover, problems can occur during the removal of the PGs, since partially deprotected compounds can generate insoluble aggregates [24]. Incomplete deprotection and residual PGs can largely affect the properties of the obtained polymer. Chemical synthesis provides

• methodologies or post-extraction modifications are not discussed. Review Glucose-based polysaccharides Cellulose Cellulose is a polymer consisting of glucose units connected by β(1–4) glycosidic bonds. It is mainly found in two allomorphs – Cellulose I (natural) and Cellulose II (synthetic) – that differ in the

• achieved by ROP of 3,6-dibenzyl-protected 4 catalyzed by Ph3CBF4 [83]. The protected polymer 5 was obtained in 2 h in 62% yield and an average DP of 19.3. The benzyl (Bn) group seems to be essential for the selective transformation [84]. Several derivatives were prepared in a similar fashion (Scheme 1B

Natural products in the predatory defence of the filamentous fungal pathogen Aspergillus fumigatus

• Jana M. Boysen,
• Nauman Saeed and
• Falk Hillmann

Beilstein J. Org. Chem. 2021, 17, 1814–1827, doi:10.3762/bjoc.17.124

• -melanin synthesis completely which leads to white spores [45]. DHN-melanin is a heterogeneous polymer, as such it does not have a unique structure. Its insolubility aggravates any structural analyses of the deciphering of repetitive motives. However, there were studies doing either computational

Development of N-F fluorinating agents and their fluorinations: Historical perspective

• Teruo Umemoto,
• Yuhao Yang and
• Gerald B. Hammond

Beilstein J. Org. Chem. 2021, 17, 1752–1813, doi:10.3762/bjoc.17.123

• shows 31 examples and their methods of preparation. Umemoto and co-worker also reported the synthesis of a polymer version, poly(vinyl-N-fluoropyridinium salts) of these reagents [36]. The reactivities of many N-fluoropyridinium salts were examined [32] and mainly five kinds of N-fluoropyridinium salts

• acid, or its metal salt in acetonitrile or as a 50:1 mixture of acetonitrile/formic acid at −40 to 0 °C. The yields were good to excellent [86] (Figure 7). The trimer 24-3 and polymer homologues 24-4 were also prepared. The N,N’-difluorobipyridinium salts are stable and generally furnished non

A systems-based framework to computationally describe putative transcription factors and signaling pathways regulating glycan biosynthesis

• Theodore Groth,
• Rudiyanto Gunawan and
• Sriram Neelamegham

Beilstein J. Org. Chem. 2021, 17, 1712–1724, doi:10.3762/bjoc.17.119

• for the addition of GalNAc to glucuronic acid to increase chondroitin polymer length, CHST3, CHST11, and UST are involved in the sulfation of GalNAc and iduronic acid, and DSEL is the epimerase which converts glucuronic acid to iduronic acid in CS/DS chains. MECP2 disproportionately regulates heparan

Electron-rich triarylphosphines as nucleophilic catalysts for oxa-Michael reactions

• Susanne M. Fischer,
• Simon Renner,
• A. Daniel Boese and
• Christian Slugovc

Beilstein J. Org. Chem. 2021, 17, 1689–1697, doi:10.3762/bjoc.17.117

• mixture was dissolved in dichloromethane and precipitated from diethyl ether resulting in about 50% polymer yield featuring Mn values of 1500–1800 g/mol [30]. Next, the oxidation stability of the catalysts was tested. For this purpose, the three different phosphines were exposed to air for 14 d in dark

• from MZ-Gel SD plus, 500 A and 100 A, linear 5 µ; UV detector (SPD-20A) and RI detector (RID-20A)) using THF as eluent. Poly(styrene) standards in the range of 350 to 17800 g/mol purchased from Polymer Standard Service were used for calibration. Computational details All calculations were run with the

Chemical approaches to discover the full potential of peptide nucleic acids in biomedical applications

• Nikita Brodyagin,
• Martins Katkevics,
• Venubabu Kotikam,
• Christopher A. Ryan and
• Eriks Rozners

Beilstein J. Org. Chem. 2021, 17, 1641–1688, doi:10.3762/bjoc.17.116

• [1]. Even with the additional lysine, the solubility of PNA decreases as the polymer length increases. PNA solubility in the HEPES buffer at pH 7.3 and 37 °C is estimated to be in the 0.1–0.5 mM range [12][13]. The hydrophobic nature and lack of electrostatic repulsion of the PNA backbone favors

A recent overview on the synthesis of 1,4,5-trisubstituted 1,2,3-triazoles

• Pezhman Shiri,
• Ali Mohammad Amani and
• Thomas Mayer-Gall

Beilstein J. Org. Chem. 2021, 17, 1600–1628, doi:10.3762/bjoc.17.114

• decrease in the yield [47]. Some research groups have utilized strain-promoted azide–alkyne cycloaddition reactions (SPAAC) on side chains to afford polymer-based prodrugs. Generally, a range of key strained cyclooctyne derivatives 52 could be reacted with aliphatic azides 51 via this strategy to give

• fully decorated triazoles 53 (Scheme 18a). A research group reported a novel polymer 56 functionalized by doxorubicin (DOX). To produce this prodrug, cyclooctyne-derivatized doxorubicin 55 was grafted on an azide-functionalized polymer 54. In the final step of the construction of this prodrug, the

• after the support of DOX molecules on the polymer prodrug, which resulted in reduced side effects (Scheme 18b) [48][49]. Cu-catalyzed synthesis of fully decorated triazoles The Cu-catalyzed regioselective cyclization of alkynes 57 and azides 58, followed by coupling with propargylic carbonates 59

Methodologies for the synthesis of quaternary carbon centers via hydroalkylation of unactivated olefins: twenty years of advances

• Thiago S. Silva and
• Fernando Coelho

Beilstein J. Org. Chem. 2021, 17, 1565–1590, doi:10.3762/bjoc.17.112

• ., styrene derivatives [17]) that produce hundreds of tons for polymer synthesis. The goal of this review is to demonstrate the utility of olefins as starting materials in the synthesis of all-carbon quaternary centers through hydroalkylation reactions. Only the hydroalkylation of unactivated olefins as

Recent advances in the application of isoindigo derivatives in materials chemistry

• Andrei V. Bogdanov and
• Vladimir F. Mironov

Beilstein J. Org. Chem. 2021, 17, 1533–1564, doi:10.3762/bjoc.17.111

• of functional materials are analyzed and summarized. These bisheterocycles can be used in the creation of organic solar cells, sensors, lithium ion batteries as well as in OFET and OLED technologies. The potentials of the use of polymer structures based on isoindigo as photoactive component in the

• compound 9c led to a decrease in the efficiency to 2.82% [22]. Perylene diimide-derived isoindigo derivative 10 was used as an acceptor in the creation of a nonfullerene OSC with thiophene polymer 11 as a donor component (Scheme 8). The PCE value of such a device turned out to be 2.6%. Cho et al

• popular and most studied direction in the creation of OSCs is the use of polymer structures containing an isoindigo fragment in a monomer unit associated with a different number of thiophene substituents (Scheme 12). By the example of one of the simplest representatives of this type of polymers, a

Breaking paracyclophane: the unexpected formation of non-symmetric disubstituted nitro[2.2]metaparacyclophanes

• Suraj Patel,
• Tyson N. Dais,
• Paul G. Plieger and
• Gareth J. Rowlands

Beilstein J. Org. Chem. 2021, 17, 1518–1526, doi:10.3762/bjoc.17.109

• archetypal cyclophane, with a strong interaction between the two aromatic rings, but it is readily available, being a ‘dimer’ for the polymer parylene [6][7]. Over the last twenty years, there has been a resurgence in interest in this compound as a scaffold for the synthesis of asymmetric catalysts, energy

Photoinduced post-modification of graphitic carbon nitride-embedded hydrogels: synthesis of 'hydrophobic hydrogels' and pore substructuring

• Cansu Esen and
• Baris Kumru

Beilstein J. Org. Chem. 2021, 17, 1323–1334, doi:10.3762/bjoc.17.92

• two scenarios. The synthesis of ‘hydrophobic hydrogel’ is reported and its application in delayed cation delivery was investigated. Furthermore, pores of the initial hydrogel were modified by the formation of a secondary polymer network. Such a facile and straightforward synthetic protocol to

• , and a detailed overview has been reported by Shalom et.al. [19]. Facile tunability has rendered g-CN to be applied in visible-light-induced catalytic reactions such as water splitting [20][21][22], pollutant degradation [23][24][25][26], CO2 reduction [27][28][29], photonics [30][31] and polymer

• physical adsorption/releasing performance being under the control of intermolecular interactions. Hydrophobization might enhance the hydrophobic interactions between the dye core and the polymer network, thus releasing can be achieved in a longer term. As a last simulative experiment, cation (K+, Ca2+, Mg2

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

• offer the advantage of high surface-to-volume ratio and scalability. These systems consist of nanoparticles embedded into a porous polymer matrix. In heterogeneous catalysis, a higher particle stability and good distribution of the catalyst leads to a reduction in pressure drop alongside a stronger

Recent advances in palladium-catalysed asymmetric 1,4–additions of arylboronic acids to conjugated enones and chromones

• Jan Bartáček,
• Jan Svoboda,
• Martin Kocúrik,
• Jaroslav Pochobradský,
• Alexander Čegan,
• Miloš Sedlák and
• Jiří Váňa

Beilstein J. Org. Chem. 2021, 17, 1048–1085, doi:10.3762/bjoc.17.84

• ). The results obtained were consistent with those reported by O’Reilly using a polymeric backbone with catalytic centres inside the chain [56]. The authors outlined the possibility of recycling the catalyst based on the lower critical solution temperature (LCST) of the catalytic polymer system. The

• catalyst precipitated and was recovered by centrifugation and discarding the supernatant liquid. This process was complicated by a low catalyst loading and high phase-transition temperature leading to the loss of mass during this procedure. The authors, however, did not try the preparation of a polymer

A chromatography-free and aqueous waste-free process for thioamide preparation with Lawesson’s reagent

• Ke Wu,
• Yichen Ling,
• An Ding,
• Liqun Jin,
• Nan Sun,
• Baoxiang Hu,
• Zhenlu Shen and
• Xinquan Hu

Beilstein J. Org. Chem. 2021, 17, 805–812, doi:10.3762/bjoc.17.69

• incomparable chelating ability towards selected transition metals, and the corresponding complexes were applied in various areas such as chemical-sensor materials, tunable redox-potential complexes, polymer hybrid luminescence materials, building blocks for multinuclear complexes, and as catalysts for cross

Chiral isothiourea-catalyzed kinetic resolution of 4-hydroxy[2.2]paracyclophane

• David Weinzierl and
• Mario Waser

Beilstein J. Org. Chem. 2021, 17, 800–804, doi:10.3762/bjoc.17.68

• polymer chemistry [1][2][7][8][9], these planar chiral molecules have been very successfully used in asymmetric catalysis [3][4][10][11][12]. Accordingly, the development of methods for the asymmetric synthesis of enantiomerically pure, or at least enantiomerically enriched, derivatives that can be

[2 + 1] Cycloaddition reactions of fullerene C₆₀ based on diazo compounds

• Yuliya N. Biglova

Beilstein J. Org. Chem. 2021, 17, 630–670, doi:10.3762/bjoc.17.55

• butyric acid 209. Based on this, fullerene dimer 210 with four hydrogen bonds having a very high dimerization constant was obtained (Scheme 43). Diethyl 4-oxopimelate was used as the precursor of polymer 213. The former was converted via diacid 211 to the target methanofullerene 212, the solution of which

Valorisation of plastic waste via metal-catalysed depolymerisation

• Francesca Liguori,
• Carmen Moreno-Marrodán and
• Pierluigi Barbaro

Beilstein J. Org. Chem. 2021, 17, 589–621, doi:10.3762/bjoc.17.53

• , we will use the term “depolymerisation” to identify the “process of converting a macromolecule into (recoverable) monomers or a mixture of monomers". Another relevant definition is that of “bioplastic”, meaning “biobased polymer derived from the biomass or issued from monomers derived from the

• breakdown by the recycled polymer, the final product or the process involved further differentiates between methods, which may lead to occasional overlaps and inconsistencies [43][44]. “Reuse” is considered a zero-order recycling option, meaning “any operation by which products or components that are not

• recycling of clean, uncontaminated single-polymer materials to give products with analogous performance and applications [47]. For example, polyethylene bottles are recycled into new bottles. Similarly, in “physical recycling”, the polymeric structure of the original material is maintained, although

Annulation of a 1,3-dithiole ring to a sterically hindered o-quinone core. Novel ditopic redox-active ligands

• Sergey V. Norkov,
• Anton V. Cherkasov,
• Andrey S. Shavyrin,
• Maxim V. Arsenyev,
• Viacheslav A. Kuropatov and
• Vladimir K. Cherkasov

Beilstein J. Org. Chem. 2021, 17, 273–282, doi:10.3762/bjoc.17.26

• a chain coordination polymer, each unit consists of two NaH(hfac) molecules and one molecule of o-quinone 4 (Figure 2). The chain is constituted from sodium ions; each sodium ion is surrounded by five oxygens. Four of them belong to hfac molecules, the fifth one is a carbonyl oxygen atom of o

• from o-quinones 3, and 7–10 were generated directly before recording of EPR spectra according to the procedure described previously [56][57]. Active methylene compounds used for the preparation of gem-dithiolates. Fragment of coordination polymer chain of adduct 8 in the crystal phase. Hydrogen atoms