Formal preparation of regioregular and alternating thiophene–thiophene copolymers bearing different substituents

• Atsunori Mori,
• Keisuke Fujita,
• Chihiro Kubota,
• Toyoko Suzuki,
• Kentaro Okano,
• Takuya Matsumoto,
• Takashi Nishino and
• Masaki Horie

Beilstein J. Org. Chem. 2020, 16, 317–324, doi:10.3762/bjoc.16.31

• a monomer. Nickel-catalyzed polymerization of bithiophene with substituents at the 3-position, including alkyl-, fluoroalkyl-, or oligosiloxane-containing groups, afforded the corresponding copolymers in good to excellent yield. The solubility test in organic solvents was performed to reveal that

• head-to-tail (HT) orientation with respect to the substituent at the 3-position are extensively studied to date since they generally show superior performances as materials [1][2][3][4][5][6]. Cross-coupling polymerization catalyzed by a transition metal complex has been recognized as an effective tool

• by polymerization catalyzed by a nickel complex, leading to the regioregular HT polythiophene (Scheme 1) [8][9]. An additional feature of the deprotonative protocol for polythiophene is the possibility to use chlorothiophene 3, in which the use of a nickel N-heterocyclic carbene (NHC) complex was

Functionalization of the imidazo[1,2-a]pyridine ring in α-phosphonoacrylates and α-phosphonopropionates via microwave-assisted Mizoroki–Heck reaction

• Damian Kusy,
• Agata Wojciechowska,
• Joanna Małolepsza and
• Katarzyna M. Błażewska

Beilstein J. Org. Chem. 2020, 16, 15–21, doi:10.3762/bjoc.16.3

• result being consistent with analogous reactions reported in the literature [22][23]. In the reaction with acrylic acid and acrylamide, substrate 1a was recovered, probably due to the propensity of these acrylic substrates to polymerization. In case of ethyl crotonate and methyl metacrylate, only traces

A green, economical synthesis of β-ketonitriles and trifunctionalized building blocks from esters and lactones

• Daniel P. Pienaar,
• Kamogelo R. Butsi,
• Amanda L. Rousseau and
• Dean Brady

Beilstein J. Org. Chem. 2019, 15, 2930–2935, doi:10.3762/bjoc.15.287

• alkoxide anions. This reduces the occurrence of undesirable side-reactions, e.g., intermolecular aldol reaction, lactone/ketonitrile product dimerization and ring-opening polymerization. The application of this method to produce the analogous hemiketal 6 from γ-butyrolactone was not as efficient. Although

• the occurrence of side-reactions and side-products, e.g., aldol reactions and polymerization, and results in a higher yield of the desired product compared to that obtained from γ-butyrolactone. With compounds 5 and 6 in hand, simple and mild reduction protocols at rt satisfyingly afforded the desired

Carbazole-functionalized hyper-cross-linked polymers for CO₂ uptake based on Friedel–Crafts polymerization on 9-phenylcarbazole

• Dandan Fang,
• Xiaodong Li,
• Meishuai Zou,
• Xiaoyan Guo and
• Aijuan Zhang

Beilstein J. Org. Chem. 2019, 15, 2856–2863, doi:10.3762/bjoc.15.279

• a high surface area and a high total pore volume. The BET specific surface areas of P3 was up to 769 m2 g−1 with narrow pore size distribution and the CO2 adsorption capacity of P11 was up to 52.4 cm3 g−1 (273 K/1.00 bar). Keywords: 9-phenylcarbazole; CO2 uptake; Friedel–Crafts polymerization

• carbon. Based on the above peaks in the solid state NMR, the Friedel–Crafts polymerization product was confirmed. TGA analysis The thermal stability of HCPs was investigated by TGA tests (Figure 3 and Supporting Information File 1, Figure S3). A slight weight loss at 100 °C was observed for P2, P4, P5

• polymerization process; to explore the effect of the reaction temperature on the porosity, we have synthesized P6 and P7 by increasing the reaction temperature T1 from rt (P3) to 40 and 50 °C. When comparing the sorption isotherms of the HCPs (Supporting Information File 1, Figure S4), it was envisioned that

1,5-Phosphonium betaines from N-triflylpropiolamides, triphenylphosphane, and active methylene compounds

• Vito A. Fiore,
• Chiara Freisler and
• Gerhard Maas

Beilstein J. Org. Chem. 2019, 15, 2603–2611, doi:10.3762/bjoc.15.253

• ]. Conclusion We have observed that the reaction of N-triflyl-N-phenylpropiolamides with triphenylphosphane results in undefined polymerization and formation of N-phenyltriflamide. In the presence of several active methylene compounds, however, a clean three-component reaction leads to a novel type of

Experimental and computational electrochemistry of quinazolinespirohexadienone molecular switches – differential electrochromic vs photochromic behavior

• Eric W. Webb,
• Jonathan P. Moerdyk,
• Kyndra B. Sluiter,
• Benjamin J. Pollock,
• Amy L. Speelman,
• Eugene J. Lynch,
• William F. Polik and
• Jason G. Gillmore

Beilstein J. Org. Chem. 2019, 15, 2473–2485, doi:10.3762/bjoc.15.240

• substrates [11][12][13][14][15], or vinylcarbazole or alkoxystyrene derivatives for radical cation cylcloaddition and polymerization reactions [16][17][18][19][20]). We thus proposed the replacement of the naphthalene in 1a with a more electron-deficient quinoline ring. Due to the saturated spirocyclic

Fluorinated azobenzenes as supramolecular halogen-bonding building blocks

• Esther Nieland,
• Oliver Weingart and
• Bernd M. Schmidt

Beilstein J. Org. Chem. 2019, 15, 2013–2019, doi:10.3762/bjoc.15.197

• stilbene squares used for topochemical polymerization [22]. Additionally, halonium ions [N···I+···N] were reported to form several charged, discrete supramolecular capsules [30][31][32][33] and helicates [34]. In the same line, we have demonstrated recently that both E-4,4’-di(iodo)perfluoroazobenzene (A2

Recent advances on the transition-metal-catalyzed synthesis of imidazopyridines: an updated coverage

• Gagandeep Kour Reen,
• Ashok Kumar and
• Pratibha Sharma

Beilstein J. Org. Chem. 2019, 15, 1612–1704, doi:10.3762/bjoc.15.165

An azobenzene container showing a definite folding – synthesis and structural investigation

• Abdulselam Adam,
• Saber Mehrparvar and
• Gebhard Haberhauer

Beilstein J. Org. Chem. 2019, 15, 1534–1544, doi:10.3762/bjoc.15.156

• organoammonium ions [10], and biomolecules [11][12][13][14][15][16][17]. Furthermore, modified Lissoclinum cyclopeptides were used for the construction of novel tubular and cage structures [18][19], as prototypes for mimicking multiple loops of proteins [20] and for homochiral supramolecular polymerization [21

Selenophene-containing heterotriacenes by a C–Se coupling/cyclization reaction

• Pierre-Olivier Schwartz,
• Sebastian Förtsch,
• Astrid Vogt,
• Elena Mena-Osteritz and
• Peter Bäuerle

Beilstein J. Org. Chem. 2019, 15, 1379–1393, doi:10.3762/bjoc.15.138

• properties provides interesting structure–property relationships and gives valuable insights into the role of heteroatoms within the series of the heterotriacenes. Electrooxidative polymerization led to the corresponding poly(heterotriacene)s P2–P4. Keywords: conducting polymer; C–S coupling; C–Se coupling

• oxidatively polymerized to polythiophenes [48][49][50] or polyselenophenes [51], respectively, we were interested in the electropolymerization of heterotriacenes 1–4 to the corresponding conjugated polymers P1–P4. Hence, monomers 1–4 were subjected to potentiodynamic polymerization in dichloromethane/TBAPF6

• subsequent electrochemical characterization of polymer P(DTS) P2 at various scan rates in a monomer-free electrolyte is shown (right). The other examples for P1, P3, and P4 are shown in Supporting Information File 1, Figure S14. After the oxidation of the monomer in the first scan, polymerization starts by

Synthesis of dipolar molecular rotors as linkers for metal-organic frameworks

• Sebastian Hamer,
• Fynn Röhricht,
• Marius Jakoby,
• Ian A. Howard,
• Xianghui Zhang,
• Christian Näther and
• Rainer Herges

Beilstein J. Org. Chem. 2019, 15, 1331–1338, doi:10.3762/bjoc.15.132

• polymerisation of the acetylides. No deprotected terminal acetylene was observed. To avoid polymerization, the solvent was changed to acetonitrile and the temperature was lowered to 0 °C. Additionally, carbon dioxide was not just used as the reaction atmosphere, but directly bubbled through the solution

Ugi reaction-derived prolyl peptide catalysts grafted on the renewable polymer polyfurfuryl alcohol for applications in heterogeneous enamine catalysis

• Alexander F. de la Torre,
• Gabriel S. Scatena,
• Oscar Valdés,
• Daniel G. Rivera and
• Márcio W. Paixão

Beilstein J. Org. Chem. 2019, 15, 1210–1216, doi:10.3762/bjoc.15.118

• Abstract The multicomponent synthesis of prolyl pseudo-peptide catalysts using the Ugi reaction with furfurylamines or isocyanides is described. The incorporation of such a polymerizable furan handle enabled the subsequent polymerization of the peptide catalyst with furfuryl alcohol, thus rendering

• -supported catalysts amenable for continuous-flow asymmetric enamine catalysis [9][10]. The acid-catalyzed polymerization of furfuryl alcohol renders a dark polymer featuring a complex cross-linked polyunsaturated scaffold derived from polycondensation and Diels–Alder reactions [11][12]. Worldwide, there is

• synthesis of prolyl pseudo-peptides having a furan ring handle, which could be subsequently incorporated into PFA during the polymerization process. Results and Discussion To this end, a solution-phase multicomponent procedure based on the Ugi four-component reaction (Ugi-4CR) [14], was employed to

Self-assembly behaviors of perylene- and naphthalene-crown macrocycle conjugates in aqueous medium

• Xin Shen,
• Bo Li,
• Tiezheng Pan,
• Jianfeng Wu,
• Yangxin Wang,
• Jie Shang,
• Yan Ge,
• Lin Jin and
• Zhenhui Qi

Beilstein J. Org. Chem. 2019, 15, 1203–1209, doi:10.3762/bjoc.15.117

• water [56]. Following this water-centered view, we further explored a new type of supramolecular polymeric adhesive based on B21C7 derived low–molecular weight (LMW) monomer, in which the water molecules serve as essential co-monomers to the polymerization process, rather than as solvent [57]. Compared

Mechanochemical synthesis of hyper-crosslinked polymers: influences on their pore structure and adsorption behaviour for organic vapors

• Sven Grätz,
• Sebastian Zink,
• Hanna Kraffczyk,
• Marcus Rose and
• Lars Borchardt

Beilstein J. Org. Chem. 2019, 15, 1154–1161, doi:10.3762/bjoc.15.112

• Universität Darmstadt, Darmstadt, Germany 10.3762/bjoc.15.112 Abstract This study elucidates a mechanochemical polymerization reaction towards a hyper-crosslinked polymer as an alternative to conventional solvent-based procedures. The swift and solvent-free Friedel–Crafts alkylation reaction yields a porous

• interesting adsorbents with a dynamic adsorption behaviour. However, the low solubility of POPs is a main challenge in their synthesis protocols. Solution-based procedures, for example, suffer from almost instant precipitation and thus only produce materials with a low degree of polymerization [10]. In the

• parameter was determined to be the rotational speed of the ball mill. At 200 rpm this led to a low SSA (7–66 m2g−1) due to an incomplete polymerization, while 800 rpm resulted in a medium SSA (600–820 m2g−1). This observation is hinting towards a partial degradation of the porosity by the high energy input

Mechanochemical synthesis of poly(trimethylene carbonate)s: an example of rate acceleration

• Sora Park and
• Jeung Gon Kim

Beilstein J. Org. Chem. 2019, 15, 963–970, doi:10.3762/bjoc.15.93

• Sora Park Jeung Gon Kim Department of Chemistry and Research Institute of Physics and Chemistry, Chonbuk National University, Jeon-Ju, Jeollabuk-do, 54896, Republic of Korea 10.3762/bjoc.15.93 Abstract Mechanochemical polymerization is a rapidly growing area and a number of polymeric materials

• from low reactivity. The solvent-free mechanochemical polymerization of trimethylene carbonate using the organocatalysts 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) and 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) are examined herein. The polymerizations under ball-milling conditions exhibited significant

• rate enhancements compared to polymerizations in solution. A number of milling parameters were evaluated for the ball-milling polymerization. Temperature increases due to ball collisions and exothermic energy output did not affect the polymerization rate significantly and the initial mixing speed was

Photochemical generation of the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical from caged nitroxides by near-infrared two-photon irradiation and its cytocidal effect on lung cancer cells

• Ayato Yamada,
• Manabu Abe,
• Yoshinobu Nishimura,
• Shoji Ishizaka,
• Masashi Namba,
• Taku Nakashima,
• Kiyofumi Shimoji and
• Noboru Hattori

Beilstein J. Org. Chem. 2019, 15, 863–873, doi:10.3762/bjoc.15.84

• polymers with narrow molecular mass distributions has been accomplished using nitroxides as a mediator, i.e., so-called nitroxide-mediated polymerization (NMP) [16][17][18][19][20], and the nitroxide-mediated synthesis of ketones from alcohols is also well utilized in organic synthesis [21][22][23][24][25

• ultraviolet (355 nm) irradiation (Scheme 1) [33]. De-aerated conditions are necessary for the triplet-sensitized generation of TEMPO due to the triplet quenching ability of O2. The polymerization reactions were initiated via photochemical reaction [34][35][36]. For physiological studies, however, the

• in life phenomena [47][48][49][50][51][52][53][54] and of promoting site-selective chemical reactions such as polymerization. Very recently, Guillaneuf and co-workers reported the two-photon-induced release of nitroxides in a materials science study [55]. In the last decade, we developed a TP

Hoveyda–Grubbs catalysts with an N→Ru coordinate bond in a six-membered ring. Synthesis of stable, industrially scalable, highly efficient ruthenium metathesis catalysts and 2-vinylbenzylamine ligands as their precursors

• Kirill B. Polyanskii,
• Kseniia A. Alekseeva,
• Pavel V. Raspertov,
• Pavel A. Kumandin,
• Eugeniya V. Nikitina,
• Atash V. Gurbanov and
• Fedor I. Zubkov

Beilstein J. Org. Chem. 2019, 15, 769–779, doi:10.3762/bjoc.15.73

• , ring-opening metathesis polymerization – ROMP and acyclic diene metathesis – ADMET. This motivates the investigations into the development of new, efficient, stable, and highly selective catalytic systems based on ruthenium complexes. However, in reality, a limited set of commercially available

• ][26][27][28][29][30][31][32][33][34][35][36][37][38]. Moreover, a small number of patents, which describe the applications of such type of catalysts in ROMP reactions, were published [25][26][27][28]. Among all these applications, the use of the catalysts for the polymerization of dicyclopentadiene

Synthesis of polydicyclopentadiene using the Cp₂TiCl₂/Et₂AlCl catalytic system and thin-layer oxidation of the polymer in air

• Zhargolma B. Bazarova,
• Ludmila S. Soroka,
• Alex A. Lyapkov,
• Мekhman S. Yusubov and
• Francis Verpoort

Beilstein J. Org. Chem. 2019, 15, 733–745, doi:10.3762/bjoc.15.69

• Abstract The polymerization process of dicyclopentadiene using a multicomponent catalytic system based on bis(cyclopentadienyl)titanium dichloride and diethylaluminum chloride was studied. It was demonstrated that the application of an excess of the aluminum component leads to the formation of stable

• charged complexes of blue discoloration, which initiate cationic polymerization of dicyclopentadiene. Unstabilized thin layers of obtained polydicyclopentadiene undergo oxidation and structuring under atmospheric oxygen. Oxidation of polydicyclopentadiene films in air occurs slowly during several weeks

• through the layers. Consequently, this leads to the transition of the oxidation from a kinetic mode into a diffusive mode. Such structural changes do not occur in a polymer that was stabilized by adding an antioxidant. Keywords: bis(cyclopentadienyl)titanium dichloride; cationic polymerization; oxidation

Intramolecular cascade annulation triggered by rhodium(III)-catalyzed sequential C(sp²)–H activation and C(sp³)–H amination

• Liangliang Song,
• Guilong Tian,
• Johan Van der Eycken and
• Erik V. Van der Eycken

Beilstein J. Org. Chem. 2019, 15, 571–576, doi:10.3762/bjoc.15.52

• polymerization, prone to go through conjugate additions [11][12]. Moreover, the cyclometalation intermediates are unstable, and the β-substitution or α,β-disubstitution of acrylate sterically prevents the cyclometalation [13][14]. Despite these, several approaches have been developed to synthesize pyridones and

Selectivity in multiple multicomponent reactions: types and synthetic applications

• Ouldouz Ghashghaei,
• Francesca Seghetti and
• Rodolfo Lavilla

Beilstein J. Org. Chem. 2019, 15, 521–534, doi:10.3762/bjoc.15.46

• , arguably, it would be difficult to reach under standard conditions. However, this lack of selectivity allows the generation of complex mixtures of adducts, useful in combinatorial chemistry for biological purposes. On the other hand, MCR polymerization takes advantage of this behaviour, and a variety of

• ; V) generation of new functional groups; VI) polymerization; VII) macrocyclization; FG = functional group. Indiscriminate double Ugi MCR upon pyridine-2,6-dicarboxylic acid. Representative examples of MCR-polymer synthesis. A) Biginelli HTS of polymers; B) Passerini;- C) Ugi-; D) metal-catalyzed MCR

Synthesis and selected transformations of 2-unsubstituted 1-(adamantyloxy)imidazole 3-oxides: straightforward access to non-symmetric 1,3-dialkoxyimidazolium salts

• Grzegorz Mlostoń,
• Małgorzata Celeda,
• Katarzyna Urbaniak,
• Marcin Jasiński,
• Vladyslav Bakhonsky,
• Peter R. Schreiner and
• Heinz Heimgartner

Beilstein J. Org. Chem. 2019, 15, 497–505, doi:10.3762/bjoc.15.43

• , alkoxyamines are known not only as bioactive compounds [19][20] but also as important initiators of polymerization processes that have been extensively studied in the recent decade [21]. Among alkoxyamines, adamantyloxyamine (4) occupies a prominent position, and for that reason it was selected for experiments

Aqueous olefin metathesis: recent developments and applications

• Valerio Sabatino and
• Thomas R. Ward

Beilstein J. Org. Chem. 2019, 15, 445–468, doi:10.3762/bjoc.15.39

• ; Introduction Olefin metathesis represents a versatile synthetic tool for the construction of carbon–carbon bonds [1][2][3][4][5][6][7][8][9]. Since its first report in 1956, a Ti(II)-catalyzed polymerization of norbornene [10], metathesis rapidly attracted interest among organic chemists and has been used in

• ][53]. Grubbs and co-workers were the first to introduce water-soluble catalysts which displayed metathesis activity in aqueous media [54]. In 1996, Grubbs et al. reported that complexes 1 and 2 catalyze the living opening polymerization of norbornene derivatives 35 and 36 in neat water. Interestingly

• publication, catalyst 9 was used for an aqueous living ring-opening metathesis polymerization-induced self-assembly (ROMPISA). The authors demonstrated the possibility of performing living ROMP in water selecting a quaternary ammonium-based phenyl norbornene carboximide as core-forming monomer [60]. This

Application of olefin metathesis in the synthesis of functionalized polyhedral oligomeric silsesquioxanes (POSS) and POSS-containing polymeric materials

• Patrycja Żak and
• Cezary Pietraszuk

Beilstein J. Org. Chem. 2019, 15, 310–332, doi:10.3762/bjoc.15.28

• silsesquioxanes (POSS) and POSS-containing polymeric materials. Three types of processes, i.e., cross metathesis (CM) of vinyl-substituted POSS with terminal olefins, acyclic diene metathesis (ADMET) copolymerization of divinyl-substituted POSS with α,ω-dienes and ring-opening metathesis polymerization (ROMP) of

• polymerization (ROMP) of POSS-substituted norbornene (or other ROMP susceptible cycloolefins, Scheme 2). Nearly all metathetic transformations described in this review have been performed in the presence of commonly used ruthenium-based catalysts (Figure 3). In contrast, there are only a few examples of

• to 11033 Da and polydispersity index (PDI) = 1.5. Ring-opening metathesis polymerization (ROMP) of POSS-functionalized monomers The chemistry of inorganic–organic hybrid materials has emerged as a fascinating new field of modern nanotechnology. The inclusion of POSS cages into the polymeric material

Olefin metathesis in multiblock copolymer synthesis

• Maria L. Gringolts,
• Yulia I. Denisova,
• Eugene Sh. Finkelshtein and
• Yaroslav V. Kudryavtsev

Beilstein J. Org. Chem. 2019, 15, 218–235, doi:10.3762/bjoc.15.21

• across double C=C bonds. The main techniques, actively developed during the last decade and discussed here, are the coupling of end-functionalized blocks, sequential ring-opening metathesis polymerization, and cross metathesis between unsaturated polymers, or macromolecular cross metathesis. The last

• polymerization in a living fashion turned it into a powerful tool of polymer design [1]. Hundreds of linear, comb-like, graft-, bottle-brush, ladder, and other homopolymers and copolymers were synthesized [2][3][4][5][6][7]. Block copolymers combining properties of two or more individual polymers in one material

• multiblock copolymers with respect to self-assembly. In recent years, it was demonstrated that such polymers can be prepared with many of the available techniques, including polycondensation [28], chain-shuttling polymerization [29], copper-mediated radical polymerization [30][31][32], reversible addition

N-Arylphenothiazines as strong donors for photoredox catalysis – pushing the frontiers of nucleophilic addition of alcohols to alkenes

• Fabienne Speck,
• David Rombach and
• Hans-Achim Wagenknecht

Beilstein J. Org. Chem. 2019, 15, 52–59, doi:10.3762/bjoc.15.5

• well as the first pentafluorosulfanylation method starting from sulfur hexafluoride [2]. We are convinced that the value of phenothiazine derivatives in photoredox catalysis is still underestimated. While these compounds found widespread use in ATRA (atom transfer radical addition) polymerization [15