High-performance asymmetric supercapacitor made of NiMoO₄ nanorods@Co₃O₄ on a cellulose-based carbon aerogel

• Meixia Wang,
• Jing Zhang,
• Xibin Yi,
• Benxue Liu,
• Xinfu Zhao and
• Xiaochan Liu

Beilstein J. Nanotechnol. 2020, 11, 240–251, doi:10.3762/bjnano.11.18

• conductivity of the Mo ion [17][18][19]. Unfortunately, despite the fact that NiMoO4 has a high theoretical capacitance, its widespread practical application in supercapacitors is still restricted due to its low practical capacitance as well as the poor rate performance and wettability. Therefore, the

• considered an ideal supporting material to hybridize with electroactive materials because of its low cost, easy fabrication, large surface area, interconnected porosity and high electrical conductivity [30][31]. Due to its micro/mesoporous 3D morphology with large open pores, it offers more space to grow

• excellent electrical conductivity and the 3D carbon nanonetwork. Secondly, NiMoO4 nanorods with extremely high specific capacitance are considered ideal spots for the nucleation and the growth of ZIF-67 particles. Lastly, the Co3O4 particles derived from ZIF-67 possess a nest-like structure and a porous

Phase inversion-based nanoemulsions of medium chain triglyceride as potential drug delivery system for parenteral applications

• Eike Folker Busmann,
• Dailén García Martínez,
• Henrike Lucas and
• Karsten Mäder

Beilstein J. Nanotechnol. 2020, 11, 213–224, doi:10.3762/bjnano.11.16

• the point of forming stable but nonisotonic nanoemulsions, the conductivity of a medium chain triglyceride (MCT)/Kolliphor® HS 15/NaCl solution (20:20:60) was measured as shown in Figure 1. Increasing the salinity of the aqueous phase resulted in a significant decrease of the temperature at the

• the significant conductivity decrease during the heating process with the Mettler Toledo S230 SevenCompact conductivity meter. Characterization of the osmolality The osmolality was determined in triplicate with the KNAUER Semi-Mikro Osmometer. The osmolality of the sodium chloride solution (according

Size effects of graphene nanoplatelets on the properties of high-density polyethylene nanocomposites: morphological, thermal, electrical, and mechanical characterization

• Tuba Evgin,
• Alpaslan Turgut,
• Georges Hamaoui,
• Zdenko Spitalsky,
• Nicolas Horny,
• Matej Micusik,
• Mihai Chirtoc,
• Mehmet Sarikanat and
• Maria Omastova

Beilstein J. Nanotechnol. 2020, 11, 167–179, doi:10.3762/bjnano.11.14

• scanning electron microscope (SEM) images. Our results show that the lateral size of GnPs was a more regulating factor for the above-mentioned nanocomposite properties compared to their thickness. For a given lateral size, thinner GnPs showed significantly higher electrical conductivity and a lower

• percolation threshold than thicker ones. On the other hand, in terms of thermal conductivity, a remarkable amount of enhancement was observed only above a certain filler concentration. The results demonstrate that GnPs with smaller lateral size and larger thickness lead to lower enhancement of the samples

• superior inherent properties, such as its thermal (1000–5000 W/mK [5]) and electrical conductivity (6000 S/cm [6]), and mechanical properties (a Young’s modulus of 1 TPa and a tensile strength of 130 GPa [7]). However, the mass production of graphene with high quality at a low cost is still challenging

Molecular architectonics of DNA for functional nanoarchitectures

• Debasis Ghosh,
• Lakshmi P. Datta and
• Thimmaiah Govindaraju

Beilstein J. Nanotechnol. 2020, 11, 124–140, doi:10.3762/bjnano.11.11

• conductivity properties of the system, which was used for the dual-responsive detection of ultralow concentrations (subnanomolar level) of mercury. The BNAn–dTn coassembly material was used to fabricate a field-effect transistor (FET) for the detection of mercury (Figure 5c). Remarkably, both chiroptical and

Internalization mechanisms of cell-penetrating peptides

• Ivana Ruseska and
• Andreas Zimmer

Beilstein J. Nanotechnol. 2020, 11, 101–123, doi:10.3762/bjnano.11.10

Simple synthesis of nanosheets of rGO and nitrogenated rGO

• Pallellappa Chithaiah,
• Madhan Mohan Raju,
• Giridhar U. Kulkarni and
• C. N. R. Rao

Beilstein J. Nanotechnol. 2020, 11, 68–75, doi:10.3762/bjnano.11.7

• specific capacitance compared to rGO. The higher specific capacitance of H-rGO is attributed an increased conductivity due to the reduced number of functional groups after hydrogen reduction of the rGO sample. After 1000 cycles, the H-rGO sample shows 73% retention, implying that the H-rGO has excellent

• stability (Figure 9). We compared our result with other materials reported recently (Table 1). For conductivity measurements, the H-rGO sample was dispersed in ethanol and drop-cast on a gold gap electrode. The average resistance measured using a Keithley source meter is ca. 4 MΩ. The corresponding

• electrical conductivity obtained for H-rGO is ca. 0.068 S/m. Conclusion In conclusion, we present a very simple and efficient method for the successful synthesis of nanosheets of rGO and of rGO with high nitrogen content by the thermal decomposition of sucrose and glycine. We measured the specific

Recent progress in perovskite solar cells: the perovskite layer

• Xianfeng Dai,
• Ke Xu and
• Fanan Wei

Beilstein J. Nanotechnol. 2020, 11, 51–60, doi:10.3762/bjnano.11.5

• perovskites is lower than that of their 3D counterparts because of the lower carrier mobility, the wide optical bandgap, the low conductivity and the large exciton binding energy. Therefore, Priya et al. [8] created a methylammonium (MA)-based 2D perovskite film by using the vapor-fumigation technique. The

• resulting films benefit from a higher conductivity, better carrier transport properties and a smaller exciton binding energy compared to traditional 2DRP perovskites based on bulky BA. Ultrastable 2DRP PSCs with a certified PCE of 16.6% were obtained. Their initially determined properties were degraded by

Influence of the epitaxial composition on N-face GaN KOH etch kinetics determined by ICP-OES

• Markus Tautz,
• Maren T. Kuchenbrod,
• Joachim Hertkorn,
• Robert Weinberger,
• Martin Welzel,
• Arno Pfitzner and
• David Díaz Díaz

Beilstein J. Nanotechnol. 2020, 11, 41–50, doi:10.3762/bjnano.11.4

• epitaxy stack. Thin-film technology is a common approach in industry to improve device performance. Thereby, a substrate with higher thermal conductivity, e.g., silicon or nickel, is bonded to the top p-contact of the LED structure [8]. The sapphire substrate is removed by laser lift off (LLO). This

Synthesis of amorphous and graphitized porous nitrogen-doped carbon spheres as oxygen reduction reaction catalysts

• Maximilian Wassner,
• Markus Eckardt,
• Andreas Reyer,
• Thomas Diemant,
• Michael S. Elsaesser,
• R. Jürgen Behm and
• Nicola Hüsing

Beilstein J. Nanotechnol. 2020, 11, 1–15, doi:10.3762/bjnano.11.1

• and stable materials are highly needed. Metal-free carbon materials, single- or multi-doped with N, B, P, S, halogens, Si or Se, have turned out to be promising ORR catalysts [1][2][3][4][5][6]. N-doped carbon materials show promising ORR activities along with high electric conductivity, in addition

• meso- and macropores is beneficial for the ORR activity [11]. Finally, a higher degree of graphitization generally leads to an improved electrical conductivity, which should improve the overall ORR activity. On the other hand, it may alter also the properties of the active sites, which may be either

• least partly due to its high electric resistance determined in resistance measurements (Table 5). For all catalysts nitrided at temperatures above 550 °C, which show a rather low electric resistance (Table 5), conductivity effects can be neglected. We had seen earlier that the trends with increasing

Mobility of charge carriers in self-assembled monolayers

• Zhihua Fu,
• Tatjana Ladnorg,
• Hartmut Gliemann,
• Alexander Welle,
• Asif Bashir,
• Michael Rohwerder,
• Qiang Zhang,
• Björn Schüpbach,
• Andreas Terfort and
• Christof Wöll

Beilstein J. Nanotechnol. 2019, 10, 2449–2458, doi:10.3762/bjnano.10.235

• a top electrode. We were able to determine a relationship between island size and electrical conductivity, and from this dependence, we could obtain information on the lateral charge transport and charge carrier mobility within the thin OSC layers. Our study demonstrates that AFM nanografting of

• the C−, CH2−, S−, and Au− peaks. The conductivity measurements (PFTUNA probes, spring const. 0.4 N/m) were performed by the PeakForce TUNATM method of a Bruker’s Dimension® IconTM SPM system. The scan rate was set to 0.5 Hz, the DC bias to 11.1 mV. Current sensitivity range was set to highest value

• available (0–100 pA). The current was read out at forces of 90 and 140 nN. The conductivity data of the grafted islands were evaluated in the following way: (i) in a first step the island diameters were calculated. For that, the AFM current images were used to determine the real surface area A of each

Multiwalled carbon nanotube based aromatic volatile organic compound sensor: sensitivity enhancement through 1-hexadecanethiol functionalisation

• Nadra Bohli,
• Meryem Belkilani,
• Juan Casanova-Chafer,
• Eduard Llobet and
• Adnane Abdelghani

Beilstein J. Nanotechnol. 2019, 10, 2364–2373, doi:10.3762/bjnano.10.227

• toluene for various vapour concentrations injected at room temperature. The results show an increasing resistance with increasing concentration of the injected vapours. The adsorption of these vapours on the Au-MWCNT films leads to a reduction of the global sensor electrical conductivity. The lowest

• VOCs Figure 5 shows the response of the HDT/Au-MWCNT sensor to the varying benzene and toluene vapour concentrations injected at room temperature. The detection results of the various injected vapours show a considerable decrease in the electrical conductivity of the HDT/Au-MWCNT sensor compared with

• . The considerable decrease in the conductivity is due to the oxidizing nature of the injected vapours. As the tested oxygen-treated and gold-decorated MWCNTs are p-type semiconductors, the adsorption of the oxidant vapour molecules leads to a transfer of the majority carriers of p-type semiconductors

Four self-made free surface electrospinning devices for high-throughput preparation of high-quality nanofibers

• Yue Fang and
• Lan Xu

Beilstein J. Nanotechnol. 2019, 10, 2261–2274, doi:10.3762/bjnano.10.218

• reservoir as positive pole was a cylinder with a diameter of 40 mm and a height of 30 mm, the bulk conductivity of copper was set to 5.8 × 1011 µs/cm, the electric conductivity of the polymer nozzles in the MBE was 0 µs/cm, the electric conductivity of the PAN-DMF solution with a concentration of 10 wt

Design and facile synthesis of defect-rich C-MoS₂/rGO nanosheets for enhanced lithium–sulfur battery performance

• Chengxiang Tian,
• Juwei Wu,
• Zheng Ma,
• Bo Li,
• Pengcheng Li,
• Xiaotao Zu and
• Xia Xiang

Beilstein J. Nanotechnol. 2019, 10, 2251–2260, doi:10.3762/bjnano.10.217

• sulfur [6][7][8], constructing Li2Sn blocking interlayers [9][10][11], and applying functional separators [12][13][14][15]. Although there are many methods, the most common strategy is to combine sulfur with various carbon materials owing to their excellent conductivity and flexible nanostructures

• adsorption of polysulfides [23][24]. However, the low conductivity of MoS2 often results in incomplete conversion of polysulfides. Thus, MoS2 is usually combined with carbon materials and annealing treatment is also considered [25][26]. Hence, double modification of defect-rich MoS2 nanosheets with amorphous

• redox reactions but also chemically adsorb polysulfides. In addition, rGO and carbon layer can also enhance the conductivity of C-MoS2/rGO. Therefore, the C-MoS2/rGO, as an efficient sulfur host, could exhibit excellent electrochemical performance. Experimental Preparation of defect-rich C-MoS2/rGO

A novel all-fiber-based LiFePO₄/Li₄Ti₅O₁₂ battery with self-standing nanofiber membrane electrodes

• Li-li Chen,
• Hua Yang,
• Mao-xiang Jing,
• Chong Han,
• Fei Chen,
• Xin-yu Hu,
• Wei-yong Yuan,
• Shan-shan Yao and
• Xiang-qian Shen

Beilstein J. Nanotechnol. 2019, 10, 2229–2237, doi:10.3762/bjnano.10.215

• , Chongqing, 400715, China 10.3762/bjnano.10.215 Abstract Electrodes with high conductivity and flexibility are crucial to the development of flexible lithium-ion batteries. In this study, three-dimensional (3D) LiFePO4 and Li4Ti5O12 fiber membrane materials were prepared through electrospinning and directly

• attributed to the high electronic and ionic conductivity provided by the 3D network structure of the self-standing electrodes. This design and preparation method for all-fiber-based lithium-ion batteries provides a novel strategy for the development of high-performance flexible batteries. Keywords: 3D

• for electric and hybrid vehicles due to their stable discharge potential, good cycling stability and environmental friendliness [24][25][26]. However, both of them have the disadvantages of low Li+ diffusion coefficient and poor electronic conductivity, which limit the practical applications in LIBs

Ultrathin Ni_1−xCo_xS₂ nanoflakes as high energy density electrode materials for asymmetric supercapacitors

• Xiaoxiang Wang,
• Teng Wang,
• Rusen Zhou,
• Lijuan Fan,
• Shengli Zhang,
• Feng Yu,
• Tuquabo Tesfamichael,
• Liwei Su and
• Hongxia Wang

Beilstein J. Nanotechnol. 2019, 10, 2207–2216, doi:10.3762/bjnano.10.213

• electrical conductivity. Developing ultrathin nanostructured materials is critical to achieving high electrochemical performance, because they possess rich active sites for electrochemical reactions, shortening the transport path of ions in the electrolyte during the charge/discharge processes. This paper

• metal ions and of the low material cost [4]. Nickel–cobalt sulfides have attracted attention as electrode materials for supercapacitors because of their excellent conductivity relative to the oxide counterparts, which contributes to a higher specific capacitance [5]. The multiple valency contributions

• from both nickel and cobalt ions in the bimetallic sulfides can provide relatively affluent redox reactions, resulting in higher specific capacitance and electrical conductivity [6][7]. Moreover, layered ultrathin nanoflakes in the synthesised nanomaterials, derived from metal oxides/dichalcogenides

Synthesis of highly active ETS-10-based titanosilicate for heterogeneously catalyzed transesterification of triglycerides

• Muhammad A. Zaheer,
• David Poppitz,
• Khavar Feyzullayeva,
• Marianne Wenzel,
• Jörg Matysik,
• Radomir Ljupkovic,
• Aleksandra Zarubica,
• Alexander A. Karavaev,
• Andreas Pöppl,
• Roger Gläser and
• Muslim Dvoyashkin

Beilstein J. Nanotechnol. 2019, 10, 2039–2061, doi:10.3762/bjnano.10.200

• %, Fluka, Sigma-Aldrich) were used. In the post-synthetic treatment of ETS-10, hydrogen peroxide (H2O2, 30 wt %, Merck Millipore) and distilled deionized water (DDW, 0.055 μS conductivity, PureLab flex 3 & 4 water purification systems) were used. Chemicals used in the transesterification reaction and gas

Improvement of the thermoelectric properties of a MoO₃ monolayer through oxygen vacancies

• Wenwen Zheng,
• Wei Cao,
• Ziyu Wang,
• Huixiong Deng,
• Jing Shi and
• Rui Xiong

Beilstein J. Nanotechnol. 2019, 10, 2031–2038, doi:10.3762/bjnano.10.199

• of the MoO3 monolayer exhibit an evident anisotropic behavior which is caused by the similar anisotropy of the electrical and thermal conductivity. The thermoelectric materials figure of merit (ZT) value along the x- and the y-axis is 0.72 and 0.08 at 300 K, respectively. Moreover, the creation of

• measured by a figure of merit (ZT) defined as ZT = S2σT/κ, where S, σ, T and κ represent the Seebeck coefficient, electrical conductivity, temperature and thermal conductivity, respectively [2][3]. In the past decade, great efforts have been made to boost the capabilities of thermoelectric materials

• [7] and Li-ion batteries [8][9][10][11]. Like most TMOs, bulk MoO3 has a wide band gap (about 3.0 eV) and low electrical conductivity, which seems inappropriate for thermoelectric devices. However, the electrical properties (including band gap and conductivity) of MoO3 are strongly dependent on the

Nanostructured and oriented metal–organic framework films enabling extreme surface wetting properties

• Andre Mähringer,
• Julian M. Rotter and
• Dana D. Medina

Beilstein J. Nanotechnol. 2019, 10, 1994–2003, doi:10.3762/bjnano.10.196

• properties and functions, MOFs are intriguing candidates for the design and synthesis of coatings combining a superhydrophilic, superhydrophobic, superoleophilic or superoleophobic character with desired features such as light filtering, hosting cavities, electrical conductivity, etc. In the literature, the

• -CAT-1 crystallites exhibit a hexagonally faceted, needle-like morphology with crystal cross-sections of 30–40 nm and several micrometers in length (Figure 1). In addition, the M-CAT-1 materials are electroactive featuring electrical conductivity values of up to 10−2–10−3 S cm−1 for pressed powder

• use of a MOF allows for encoding further desired surface properties such as light absorption and electrical conductivity. This can be valuable for applications such as photo-electrocatalysis water splitting where a high textural surface area, water contact and light absorption are required. A

Facile synthesis of carbon nanotube-supported NiO//Fe₂O₃ for all-solid-state supercapacitors

• Shengming Zhang,
• Xuhui Wang,
• Yan Li,
• Xuemei Mu,
• Yaxiong Zhang,
• Jingwei Du,
• Guo Liu,
• Xiaohui Hua,
• Yingzhuo Sheng,
• Erqing Xie and
• Zhenxing Zhang

Beilstein J. Nanotechnol. 2019, 10, 1923–1932, doi:10.3762/bjnano.10.188

• carbon cloth–carbon nanotube@metal oxide (CC-CNT@MO) three-dimensional structures combine the high specific capacitance and rich redox sites of metal oxides with the large specific area and high electrical conductivity of carbon nanotubes. The prepared CC-CNT@Fe2O3 anode reaches a high capacity of 226

• application in various energy-consuming devices. Many materials have been explored to be used in supercapacitors to increase their energy density [4][5]. Carbon materials, especially carbon nanotubes and graphene, endowed with good conductivity and high specific surface area, are ideal candidates, and they

• ][15] have a high theoretical capacity from faradaic reactions but suffer from low conductivity, small surface area, and poor cycling stability, resulting in low capacitance and poor rate capability [16]. To address these issues, many researchers have devoted enormous efforts to combine carbon

Preservation of rutin nanosuspensions without the use of preservatives

• Pascal L. Stahr and
• Cornelia M. Keck

Beilstein J. Nanotechnol. 2019, 10, 1902–1913, doi:10.3762/bjnano.10.185

• preservatives. In previous studies it was already found that preservatives can strongly impair the physical stability of the nanosuspensions. Reasons for this are changes of pH value or of the conductivity of the dispersion medium, or the adsorption of the preservatives onto the surface of the particles, which

• this are the more pronounced particle growth due to Ostwald ripening at elevated temperatures and/or destabilization due to accelerated bacterial growth, which might excrete compounds that contribute to changes in pH value or conductivity in the medium or interact with the particles. Such changes

• index and 0.01 as imaginary refractive index. The zeta potential (ZP) of the nanocrystals was determined in water (adjusted to a constant conductivity of 50 µS/cm) and in original dispersion media, i.e., surfactant solution, containing either 1% (w/w) PLX 188 or Plantacare 2000, respectively

Charge-transfer interactions between fullerenes and a mesoporous tetrathiafulvalene-based metal–organic framework

• Manuel Souto,
• Joaquín Calbo,
• Samuel Mañas-Valero,
• Aron Walsh and
• Guillermo Mínguez Espallargas

Beilstein J. Nanotechnol. 2019, 10, 1883–1893, doi:10.3762/bjnano.10.183

• electron-donor TTF ligand is studied in detail by means of different spectroscopic techniques and density functional theory (DFT) calculations. Importantly, gas sorption measurements demonstrate that sorption capacity is maintained after encapsulation of fullerenes, whereas the electrical conductivity is

• catalysis [3][4][5]. In addition, electroactive MOFs combining porosity and electrical conductivity [6][7][8] have also attracted much attention during the last years in view of their potential application, for example as chemiresistive sensors [9], field-effect transistors [10] or supercapacitors [11

• ]. Whereas most MOFs are electrical insulators, some have shown to exhibit excellent electrical conductivity and high charge mobility. This was achieved either by an appropriate choice of the building units to form electronically delocalised frameworks, or by incorporating electroactive guest molecules in

Prestress-loading effect on the current–voltage characteristics of a piezoelectric p–n junction together with the corresponding mechanical tuning laws

• Wanli Yang,
• Shuaiqi Fan,
• Yuxing Liang and
• Yuantai Hu

Beilstein J. Nanotechnol. 2019, 10, 1833–1843, doi:10.3762/bjnano.10.178

• present are third-generation semiconductors, for instance, ZnO, GaN, CdS, and AlN, with wide bandgap, high breakdown electric field, high thermal conductivity, and even mechanical tunability [3]. They show numerous application prospects in electric devices and sensors, such as energy harvesters [4][5][6

Toxicity and safety study of silver and gold nanoparticles functionalized with cysteine and glutathione

• Barbara Pem,
• Igor M. Pongrac,
• Lea Ulm,
• Ivan Pavičić,
• Valerije Vrček,
• Darija Domazet Jurašin,
• Marija Ljubojević,
• Adela Krivohlavek and
• Ivana Vinković Vrček

Beilstein J. Nanotechnol. 2019, 10, 1802–1817, doi:10.3762/bjnano.10.175

• , AuNPs, AgNO3 and HAuCl4 were diluted in the SCM to concentrations ranging between 5–1000 mg Ag L−1, 5–5000 mg Au L−1, 0.1–10 mg Ag L−1 and 0.5–50 mg Au L−1, respectively. The properties of the SCM such as temperature, pH, conductivity and oxygen levels were assessed using the respective probes from

Remarkable electronic and optical anisotropy of layered 1T’-WTe₂ 2D materials

• Qiankun Zhang,
• Rongjie Zhang,
• Jiancui Chen,
• Wanfu Shen,
• Chunhua An,
• Xiaodong Hu,
• Mingli Dong,
• Jing Liu and
• Lianqing Zhu

Beilstein J. Nanotechnol. 2019, 10, 1745–1753, doi:10.3762/bjnano.10.170

• (Figure 1a) in polar coordinates. c) Azimuth-dependent RDM images. Angle-resolved DC conductivity of a 1T’-WTe2 thin film. a) Optical image of s WTe2 flake with 12 electrodes spaced 30° apart. b) and c) are the transfer characteristic curves and the output characteristic curves, respectively. d) Angle

TiO₂/GO-coated functional separator to suppress polysulfide migration in lithium–sulfur batteries

• Ning Liu,
• Lu Wang,
• Taizhe Tan,
• Yan Zhao and
• Yongguang Zhang

Beilstein J. Nanotechnol. 2019, 10, 1726–1736, doi:10.3762/bjnano.10.168

• . The excellent adhesion between TiO2 nanoparticles and GO sheets resulted in enhanced conductivity, which is highly desirable for an efficient electron transfer process. The Li/S battery with a TiO2/GO-coated separator exhibited a high initial discharge capacity of 1102.8 mAh g−1 and a 100th cycle

• ]. However, the development and widespread utilization of Li/S batteries is hindered by (i) the poor electronic/ionic conductivity of sulfur, causing a low reaction rate and electrochemical polarization, (ii) dissolution and the shuttle effect of intermediate polysulfides, resulting in the deposition of Li2S

• , the performance of Li/S batteries has been significantly enhanced by using carbon-modified separators due to the superior conductivity, adjustable pore structure and high specific surface area [23][24][25][26]. However, only physical adsorption occurs between carbonaceous materials and polysulfides