Synthesis of new representatives of A₃B-type carboranylporphyrins based on meso-tetra(pentafluorophenyl)porphyrin transformations

• Victoria M. Alpatova,
• Evgeny G. Rys,
• Elena G. Kononova and
• Valentina A. Ol'shevskaya

Beilstein J. Org. Chem. 2024, 20, 767–776, doi:10.3762/bjoc.20.70

• temperature under argon. Under these reaction conditions, the tris(carboranyl)-substituted porphyrin 6 was obtained in 39% yield after purification by column chromatography on SiO2 using CHCl3/hexane 1:1 as eluent (Scheme 3). It should be noted that the reaction of porphyrin 6 with NaN3 in DMSO at 20 °C for

• -dioxaoctane (21) and 1,13-diamino-4,7,10-trioxatridecane (22) in DMSO at 70 °C for 30 min to form amino-conjugates 23 and 24 in 71 and 84% yield, respectively, containing ethylene glycol linkers with terminal primary amino groups (Scheme 6). The presence of ethylene glycol residues in bioactive molecules is

• cytoprotective and therapeutic actions. It is synthesized from cysteine and is excreted without any further metabolism [47]. The reaction of taurine (25) with porphyrin 6 proceeded in DMSO at 20 °C for 72 h to afford taurine-containing conjugate 26 in 78% yield (Scheme 6). Conjugates 19, 23, 24, and 26 can be

Methodology for awakening the potential secondary metabolic capacity in actinomycetes

• Shun Saito and
• Midori A. Arai

Beilstein J. Org. Chem. 2024, 20, 753–766, doi:10.3762/bjoc.20.69

• chaxalactins A–C (16–18), and polycyclic polyether natural products designated terrosamycins A and B (19, 20), respectively [55][56]. Thus, the OSMAC strategy has been successfully applied over the last 10 years to generate new secondary metabolites from a single microbial strain. Sensor proteins for medium

• heat shock at 42 °C for 1 h [70]. Similarly, James et al. increased the production of granaticin (31) by Streptomyces thermoviolaceus NCIB 10076 by changing the culture temperature [71]. They showed that the yield was best at 45 °C, whereas the rate of synthesis was highest at 37 °C. However, there

• was searched to identify actinomycete strains capable of growing at high temperatures (45 °C). This screening identified 57 actinomycete strains capable of growing at 45 °C. Comparative analysis of metabolites produced by these 57 actinomycetes at room temperature or high temperature revealed that

Research progress on the pharmacological activity, biosynthetic pathways, and biosynthesis of crocins

• Zhongwei Hua,
• Nan Liu and
• Xiaohui Yan

Beilstein J. Org. Chem. 2024, 20, 741–752, doi:10.3762/bjoc.20.68

• isolated from the fruit of Gardenia jasminoides Ellis and the stigma tissue of Crocus sativus L. Crocins are the main active ingredients of C. sativus, a precious medicinal plant known as the "gold of spices". They are also responsible for the characteristic red color of saffron. Compounds of the crocin

• family are the monoglycosyl, diglycosyl, or triglycosyl products of 8,8′-diapocarotene-8,8′-dioic acid (crocetin, 1) or derivatives thereof. In addition to C. sativus and G. jasminoides, Buddleja officinalis and Buddleja davidii from the Loganiaceae family [1][2], Nyctanthes arbor-tristis from the

• , etc. For example, during the harvest of C. sativus, a high drying temperature leads to the cleavage of the glycosidic bonds [20][21][22]. Crocins are stable in alkaline and neutral solutions but are labile under acidic solutions. Crocins can be detected in the flowers, fruits, stigmas, leaves, and

Substrate specificity of a ketosynthase domain involved in bacillaene biosynthesis

• Zhiyong Yin and
• Jeroen S. Dickschat

Beilstein J. Org. Chem. 2024, 20, 734–740, doi:10.3762/bjoc.20.67

• His-tagged enzyme was obtained through heterologous expression and purification by Ni2+-NTA affinity chromatography (Figure S1, Supporting Information File 1). After incubation of the purified enzyme with the 13C-labelled SNAC derivatives (S)-11 or (R)-11 for 30 minutes at 25 °C, the incubation buffer

• buffer exchange (5 centrifugations); C) the filtrate obtained from the incubation of (R)-11 BaeJ-KS2 containing free (R)-11 (first centrifugation); D) the filtrate from the same experiment containing no (R)-11 (fifth centrifugation); E) the filtrate obtained from the incubation of (R)-11 with BaeJ-KS2

• -labelled carbons. Biosynthetic model for bacillaene (1). M1–M17 indicate modules 1–17. A = adenylation domain, ACP = acyl carrier protein, AT = acyltransferase, C = condensation domain, DH = dehydratase, KR = ketoreductase, KS = ketosynthase, MT = methyltransferase, PCP = peptidyl carrier protein, TE

Chemoenzymatic synthesis of macrocyclic peptides and polyketides via thioesterase-catalyzed macrocyclization

• Senze Qiao,
• Zhongyu Cheng and
• Fuzhuo Li

Beilstein J. Org. Chem. 2024, 20, 721–733, doi:10.3762/bjoc.20.66

• essential domains, namely adenylation (A), condensation (C), and peptidyl carrier protein (PCP). Each type I PKS module consists of three core domains containing acyltransferase (AT), ketosynthase (KS), and acyl carrier protein (ACP). PCP and ACP are collectively called thiolation domain (T). The sequence

• -century [32][33][34][35]. Biosynthetically, the corresponding cluster consists of three NRPS, TycA-C, and at the C-terminus of TycC, the TE domain can catalyze a head-to-tail macrocyclization and deliver tyrocidines [30]. With a comprehensive understanding of its biosynthetic mechanism, Walsh and co

• macrolactones. Using engineered variants of S. venezuelae ATCC 15439 designated strains DHS200141 [71] and YJ11242 [72], 24 and 25 were transformed to the corresponding macrolides through whole cell biotransformation to append ᴅ-desosamine and perform C–H oxidation(s) by the PikC monooxygenase (Scheme 6b). In

Genome mining of labdane-related diterpenoids: Discovery of the two-enzyme pathway leading to (−)-sandaracopimaradiene in the fungus Arthrinium sacchari

• Fumito Sato,
• Terutaka Sonohara,
• Shunta Fujiki,
• Akihiro Sugawara,
• Yohei Morishita,
• Taro Ozaki and
• Teigo Asai

Beilstein J. Org. Chem. 2024, 20, 714–720, doi:10.3762/bjoc.20.65

• HREIMS spectrum. The 1H and 13C NMR spectra of 1 were identical to those of sandaracopimaradiene [30][31]. As the specific rotation of compound 1 was in good agreement with the reported data ([α]D24 −14.3 (c 0.97, CHCl3) in this study; [α]D25 −10.29 (c 0.65, CHCl3) in the literature [31]), compound 1 was

• clusters containing AsCPS and AsPS. B) Domain organization of AsPS and AsCPS. C) Domain organization of CiCPS-PS. GC–MS analysis of the A. oryzae transformant. A) TIC of the extracts obtained from AO-AsGGS/AsCPS/AsPS and A. oryzae NSAR1. Compound 1 was identified to be a product, while the other minor

SOMOphilic alkyne vs radical-polar crossover approaches: The full story of the azido-alkynylation of alkenes

• Julien Borrel and
• Jerome Waser

Beilstein J. Org. Chem. 2024, 20, 701–713, doi:10.3762/bjoc.20.64

• , greatly increasing the molecular complexity of the starting substrate. Using radical chemistry would lead to a regioselective addition of azide radicals to the alkene, forming selectively the most stabilized C-centered radical. A prominent method for the generation of azide radicals relies on hypervalent

• would initially involve the addition of azide radicals to an alkene, generating a carbon-centered radical. Then, different trapping of this intermediate could be performed (Scheme 1B). First, C-centered radicals are known to recombine with metal-acetylides, in particular copper [27]. Reductive

• alkyne substituent. Arylalkynes are expected to perform well but in multiple cases alkyl substituents were reported to afford low yields or no reaction [35][36][37][38]. Finally, a radical-polar crossover (RPC) approach could be envisaged [39][40]. Instead of attempting to trap the C-centered radical

New variochelins from soil-isolated Variovorax sp. H002

• Jabal Rahmat Haedar,
• Aya Yoshimura and
• Toshiyuki Wakimoto

Beilstein J. Org. Chem. 2024, 20, 692–700, doi:10.3762/bjoc.20.63

• structure – a linear hexapeptide with β-hydroxyaspartate and hydroxamate functional groups, serving in iron-binding coordination. Three new variochelins C–E (3–5) were characterized by varied fatty acyl groups at their N-termini; notably, 4 and 5 represent the first variochelins with N-terminal unsaturated

• this study, we isolated three new congeners of variochelin-type siderophores, variochelins C–E (3–5), along with two known compounds, variochelins A (1) and B (2), from Variovorax sp. Their structures were elucidated by a combination of NMR, ESIMS/MS, and chemical derivatization. The analysis of the

• deduce the fatty acyl moiety in 3 as an decanoic acid. Thus, we determined 3 to be a new siderophore termed variochelin C, with an N-terminal decanoate. Compound 4 has the chemical formula of C47H81O17N11, as suggested by HRESIMS (m/z 534.7837 for [M − 2H]2− ion), inferring the loss of two hydrogen atoms

Evaluation of the enantioselectivity of new chiral ligands based on imidazolidin-4-one derivatives

• Jan Bartáček,
• Karel Chlumský,
• Jan Mrkvička,
• Lucie Paloušová,
• Miloš Sedlák and
• Pavel Drabina

Beilstein J. Org. Chem. 2024, 20, 684–691, doi:10.3762/bjoc.20.62

• (i.e., temperature, reaction time, amount of catalyst, solvent) were adopted from the pilot study [5] for relevant comparison of catalyst characteristics. From Table 1 and Table 2, which summarise results obtained using tridentate ligands Ia–c and IIa–c, it is evident that the catalytic activity their

• the C=O bond. In this manner, the asymmetric induction results in the restricted addition of nitromethane influenced by imidazolidin-4-one moieties. The higher enantioselectivity of complexes of the ligands with cis-cis configuration could be explained by the fact that the larger (RL) alkyl group is

• . Thus, early attempts at the aldol reaction of 4-nitrobenzaldehyde with cyclohexanone were performed to evaluate the reaction parameters, i.e., solvent, reaction temperature, and amount of acidic additive (Table 5). Hence, using DMF at −25 °C were the most convenient conditions regarding diastereo- and

Regioselective quinazoline C2 modifications through the azide–tetrazole tautomeric equilibrium

• Dāgs Dāvis Līpiņš,
• Andris Jeminejs,
• Una Ušacka,
• Anatoly Mishnev,
• Māris Turks and
• Irina Novosjolova

Beilstein J. Org. Chem. 2024, 20, 675–683, doi:10.3762/bjoc.20.61

• position of quinazolines requires longer time, higher temperatures, and sometimes the use of expensive transition-metal catalysts [12]. A selective C2 modification can be achieved by using 2-chloroquinazolines IV, where the C4 position is blocked by an unreactive C–C or C–H bond (Scheme 1). Cyclization

• reactions of substituted anilines VI, VII or N-arylamidines VIII are frequently employed for synthesizing C2-substituted quinazolines (Scheme 1), thereby influencing the spatial arrangement of the desired substituents [13][14]. Moreover, there have been recent advancements in efficient C–H activation

• techniques employing transition-metal and photocatalysis [15][16]. These methods facilitate C–C bond formation, enabling the introduction of alkyl groups at the C2 position of quinazoline derivatives. While arylsulfanyl group rearrangement reactions have been documented by us for modifying 2,4-substituted

Palladium-catalyzed three-component radical-polar crossover carboamination of 1,3-dienes or allenes with diazo esters and amines

• Geng-Xin Liu,
• Xiao-Ting Jie,
• Ge-Jun Niu,
• Li-Sheng Yang,
• Xing-Lin Li,
• Jian Luo and
• Wen-Hao Hu

Beilstein J. Org. Chem. 2024, 20, 661–671, doi:10.3762/bjoc.20.59

• and linear amine 3b were found to readily participate in this protocol, furnishing the corresponding products 4a–c in 61–84% yields. To our delight, this MCR strategy was compatible with a wide variety of complex bioactive molecules, including tetrahydropapaverine, (R)-duloxetine, sertraline

• , hydride shift process, and photoinduced homolytic cleavage of the C–Pd bond, furnishing hybrid α-ester alkylpalladium radical I. In path b, upon irradiation with blue light, photoexcited Pd(0)Ln* reduces ethyl diazoacetate (1a) to Pd-radical species I by a proton-coupled electron transfer (PCET) process

• % yield. Compound 4a could be hydrogenated to the corresponding reduction product 12 using Pd/C and ammonium formate conditions (Scheme 6a). Notably, as shown in Scheme 6b, treatment of the unsaturated γ-AA derivative 6a with Pd/C and ammonium formate led to a cyclization reaction, furnishing γ-lactam 13

Enhanced reactivity of Li⁺@C₆₀ toward thermal [2 + 2] cycloaddition by encapsulated Li⁺ Lewis acid

• Hiroshi Ueno,
• Yu Yamazaki,
• Hiroshi Okada,
• Fuminori Misaizu,
• Ken Kokubo and
• Hidehiro Sakurai

Beilstein J. Org. Chem. 2024, 20, 653–660, doi:10.3762/bjoc.20.58

• likely due to the steric effect caused by the methyl group directly connected to the alkenyl C=C bond in reactant 1. After optimizing the reaction conditions, compounds 5a and 5b were isolated in 71% and 53% yields, respectively. Importantly, the generation of multiadducts in the thermal [2 + 2

• HPLC measurement. The solutions were subjected to analytical HPLC. HPLC profiles are shown in Supporting Information File 1. HPLC conditions: column: Buckyprep ø 4.6 × (10 + 250) mm; mobile phase: chlorobenzene/acetonitrile 95:5 containing 30 mM LiTFSI; flow rate: 1.5 mL/min; temperature: 50 °C

• ; detector: UV 337 nm; injection sample volume: 5 µL. Synthesis of Li+@C60{(4-MeOC6H4)CH=CHMe} TFSI− (5a) To 2.5 mL of a chlorobenzene/acetonitrile 1:1 (v/v) solution containing Li+@C60 TFSI− (8.5 mg, 8.4 µmol) was added trans-anethole (25 µL, 24.7 mg, 0.17 mmol). The solution was stirred at 50 °C for 15

Isolation and structure determination of a new analog of polycavernosides from marine Okeania sp. cyanobacterium

• Kairi Umeda,
• Naoaki Kurisawa,
• Ghulam Jeelani,
• Tomoyoshi Nozaki,
• Kiyotake Suenaga and
• Arihiro Iwasaki

Beilstein J. Org. Chem. 2024, 20, 645–652, doi:10.3762/bjoc.20.57

• , polycavernoside analogs such as polycavernoside C (4) were isolated from red algae [3][4]. In 2015, Navarro et al. isolated polycavernoside D (5) from a marine Okeania sp. cyanobacterium [5]. They suggested that polycavernosides were produced by marine cyanobacteria based on their high content and structural

• (H-28)/δC 19.4 (C-29), δH 0.86 (H-29)/δC 17.8 (C-28), δH 0.94 (H-30)/δC 13.9 (C-31), and δH 0.90 (H-31)/δC 22.2 (C-30). These correlations elucidated the presence of two gem-dimethyl groups. Moreover, three HMBC, δH 4.03 (H-5a’)/δC 106.1 (C-1’), δH 3.61 (H-6’)/δC 83.8 (C-2’), and δH 3.45 (H-7’)/δC

• 78.5 (C-4’), revealed the presence of a 2,4-di-O-methylpyranose substructure. Furthermore, an HMBC, δH 3.48 (H-6”)/δC 78.7 (C-4”), along with typical chemical shifts and coupling constants from C-1” to C-5” obtained in CD3OD (Table 2), indicated the presence of a 4-O-methylpyranose substructure. The

Production of non-natural 5-methylorsellinate-derived meroterpenoids in Aspergillus oryzae

• Jia Tang,
• Yixiang Zhang and
• Yudai Matsuda

Beilstein J. Org. Chem. 2024, 20, 638–644, doi:10.3762/bjoc.20.56

• ). After large-scale cultivation, 3 was isolated and subjected to nuclear magnetic resonance (NMR) analysis, which suggested that 3 is the C-5′ desmethyl form of preterretonin A [17]. However, several missing signals in the 13C NMR spectrum, likely due to keto–enol tautomerization in the D-ring, hindered

• Information File 1; CCDC: 2300693). The A. oryzae transformant with ausL yielded two products 4 and 5. The major product 4 was identified as the C-5′ desmethyl analogue of protoaustinoid A and thus named 5′-desmethylprotoaustinoid A (Figure 2C) [17][22]. Meanwhile, the minor product 5 was determined as the C

• . Finally, the A. oryzae strain expressing insA7 produced two major metabolites 7 and 8. Compound 7 was determined to be the C-5′ desmethyl form of insuetusin A1 [19] using NMR and single-crystal X-ray diffraction analyses (Figure 2C and Figure S1 in Supporting Information File 1; CCDC: 2300695) and was

HPW-Catalyzed environmentally benign approach to imidazo[1,2-a]pyridines

• Luan A. Martinho and
• Carlos Kleber Z. Andrade

Beilstein J. Org. Chem. 2024, 20, 628–637, doi:10.3762/bjoc.20.55

• green catalyst with greater chemical and thermal stability in comparison to other heteropolyacids [43]. HPW has been shown to catalyze MCRs in the synthesis of heterocyclic compounds with high efficiency and chemoselectivity (Figure 2), including functionalized benzo[c]chromeno[2,3-a]phenazine [44

• (Table 1, entries 1 and 2). Significantly better yields were obtained using methanol, which is the most common solvent for this reaction, especially at 120 °C (Table 1, entries 3–12). Interestingly, the yield was also better for a lower catalyst loading (Table 1, entry 7). Further changes either in the

• temperature or in the reaction time were checked, however, with no benefit in the yields (Table 1, entries 9–12). Accordingly, with the established optimal conditions of 2 mol % of HPW, 120 °C, and 30 min, other solvents were tested, and ethanol was found to give similar results (Table 1, entry 13). For being

A laterally-fused N-heterocyclic carbene framework from polysubstituted aminoimidazo[5,1-b]oxazol-6-ium salts

• Andrew D. Gillie,
• Matthew G. Wakeling,
• Bethan L. Greene,
• Louise Male and
• Paul W. Davies

Beilstein J. Org. Chem. 2024, 20, 621–627, doi:10.3762/bjoc.20.54

• [20][21] that should facilitate access to different groups at the oxazole C-2 position allowing a range of imidazolium-forming cyclisation strategies to be explored. Glorius and co-workers reported the formation of symmetrical NHCs by imidazolium ring formation from bisoxazoline motifs [22] but

• incorporating the unsaturated oxazole counterparts has not been explored. Results and Discussion Reaction of ynamide 1a with the N-acylpyridinium-N-aminide reagent 2 proceeded in good yield to afford oxazole 3 bearing a C-2 methyleneamino moiety as the first example of a free secondary amine in this annulation

• introduce a formamide motif in place of the amine or imine to allow the use of more forcing cyclisation conditions (Scheme 1a, path c). Oxazole 8a was obtained in good yield from 1a using only a slight excess of nitrenoid 7 and 2 mol % catalyst loading. Heating 8a in the presence of POCl3 afforded the 3

Introduction of a human- and keyboard-friendly N-glycan nomenclature

• Friedrich Altmann,
• Johannes Helm,
• Martin Pabst and
• Johannes Stadlmann

Beilstein J. Org. Chem. 2024, 20, 607–620, doi:10.3762/bjoc.20.53

• particular complex-type N-glycan structure found in human leukocytes [2]. A: SNFG depiction; B: IUPAC depictions; C: Oxford style; D: smart SNFG. Except for 1D, cartoons and codes were adapted from [3] (© GlyConnect v1.2.0, distributed under the terms of the Creative Commons Attribution 4.0 International

Chemical and biosynthetic potential of Penicillium shentong XL-F41

• Ran Zou,
• Xin Li,
• Xiaochen Chen,
• Yue-Wei Guo and
• Baofu Xu

Beilstein J. Org. Chem. 2024, 20, 597–606, doi:10.3762/bjoc.20.52

• . Researchers have identified numerous compounds with anticancer properties, including mycophenolic acid, brefeldin A, and wortmannin [3], as well as compounds with antibacterial properties like xestodecalactones A–C, penicifurans A, and anthraquinone-citrinin [4]. From 2010 to 2022, researchers have identified

• substructure at C-14 with a methine at C-16, indicated by the methoxy group. The position of the methoxy substituent was established by HMBC correlations, and the 13C NMR data suggested that compound 1 includes a 4-oxo-2,3-dihydro-(1H)-quinolin-3-yl fragment. The planar structure was established from HMBC

• correlations linking three different fragments. Compound 1 features three stereogenic centers at C-2, C-3, and C-16. The relative configuration of C-2 and C-3 was determined as (2R*,3R*) by 1H-1H NOESY correlations (Figure 3), while the relative configuration of C-16 remains unresolved due to the

A myo-inositol dehydrogenase involved in aminocyclitol biosynthesis of hygromycin A

• Michael O. Akintubosun and
• Melanie A. Higgins

Beilstein J. Org. Chem. 2024, 20, 589–596, doi:10.3762/bjoc.20.51

• restriction sites and verified by DNA sequencing (Eurofins Genomics). pTip-QC1-hyg17 plasmid [10] was transformed into Rhodococcus jostii RHA1 [11]. Cultures were grown in Luria Bertani (LB) media supplemented with 34 µg mL−1 chloramphenicol at 30 °C while shaking at 200 rpm for 48 h reaching an OD600 of ≈1.4

• then induced with 50 µL of 20 mg mL−1 thiostrepton and grown for another 24 h at 30 °C while shaking at 200 rpm. Cells were then harvested by centrifugation, resuspended in binding buffer (500 mM NaCl, 20 mM Tris pH8.0) and disrupted by sonication using a Branson Sonifier 450 (5 rounds of 3 s/3 s on

• mL−1 tetracycline and grown at 200 rpm and 37 °C overnight. One liter of autoinduction media (20 g L−1 tryptone, 10 g L−1 yeast extract, 50 mM NH4Cl, 2 mM MgSO4, 0.5% glycerol, 17 mM KH2PO4, 72 mM K2HPO4, 0.05% glucose, and 0.2% lactose) supplemented with 10 μg mL−1 ampicillin and 1.5 μg mL−1

Recent developments in the engineered biosynthesis of fungal meroterpenoids

• Zhiyang Quan and
• Takayoshi Awakawa

Beilstein J. Org. Chem. 2024, 20, 578–588, doi:10.3762/bjoc.20.50

• resulting cation intermediate at C-4' to induce an acyl shift, forming the steroid-like structure of 7 with a 6-6-6-5 ring (Figure 2). Swapping terpenoid cyclases in heterologous expression systems A search of the genome database for Trt1-homolog CYCs revealed the enzyme AusL (41% identity with Trt1) in

• meroterpenoids: insuetusin A1 (12) and insuetusin B1 (10), respectively (Figure 2) [9]. Like other Trt1-type enzymes, InsB2 catalyzes the protonation of the epoxide, the formation of two six-membered rings in a chair–chair conformation, but the reaction finishes with the deprotonation of the hydroxy group at C-3

• , FMO EsdpE, which epoxidizes the C-14, C-15 double bond of 13, was employed to produce 19, and the CYC EsdpB cyclizes in a chair–chair–chair conformation to form the 6-6-6 ring structure of 20 [18][19]. This difference in the epoxidation position represents a new point of biosynthetic diversity that

Possible bi-stable structures of pyrenebutanoic acid-linked protein molecules adsorbed on graphene: theoretical study

• Yasuhiro Oishi,
• Motoharu Kitatani and
• Koichi Kusakabe

Beilstein J. Org. Chem. 2024, 20, 570–577, doi:10.3762/bjoc.20.49

• activation barrier. This steric hindrance effect is analogous to the well-known steric hindrance effect of the rotation around the C–C bond in ethane. Indeed, on the graphene surface, the possible conformations resulting from the rotation are effectively limited to conformation 2, due, in part, to the

• (1.63 eV), than that of conformation 2, which is about 1.28 eV. The stabilization of conformation 1 partly comes from interaction between the succinimidyl ester part and graphene. There are other C–C single bonds in the alkyl chain, such as those shown by the dashed and dotted lines in Figure 1a

• change around the alkyl chain, or a distortion effect appearing in the adsorption structure of the linker itself. Those effects are not represented by mass substitution. Thus, we suppose that a substitution occurs to the extent which rotational motion around a C–C single bond in the alkyl chain is

Entry to new spiroheterocycles via tandem Rh(II)-catalyzed O–H insertion/base-promoted cyclization involving diazoarylidene succinimides

• Alexander Yanovich,
• Anastasia Vepreva,
• Ksenia Malkova,
• Grigory Kantin and
• Dmitry Dar’in

Beilstein J. Org. Chem. 2024, 20, 561–569, doi:10.3762/bjoc.20.48

• multitarget drugs against COVID-19 [36], and amiaspochalasin C isolated from the solid culture of Aspergillus micronesiensis [37] and 1,9-epoxy-9a-hydroxystenine from the roots of Stemona tuberosa [38]) (Figure 1). Hence, the development of novel synthetic methods to construct spiro O-heterocycles constitutes

• from each of the bromo-substituted alcohols used by us have two main pathways of transformation under the action of base: 1) exo-tet cyclization with substitution of the bromine atom and formation of the spirocycle, and 2) migration of the exocyclic double C=C bond into the imide cycle (the process is

• consequence, the significantly greater nucleophilicity of the nearest α-carbon atom. When an attempt was made to generate an anion from compound 25 under the action of a stronger base (t-BuOK/THF, 0 °C) in order to effect spirocyclization, only the formation of a complex multicomponent mixture was observed

Synthesis of photo- and ionochromic N-acylated 2-(aminomethylene)benzo[b]thiophene-3(2Н)-ones with a terminal phenanthroline group

• Vladimir P. Rybalkin,
• Sofiya Yu. Zmeeva,
• Lidiya L. Popova,
• Irina V. Dubonosova,
• Olga Yu. Karlutova,
• Oleg P. Demidov,
• Alexander D. Dubonosov and
• Vladimir A. Bren

Beilstein J. Org. Chem. 2024, 20, 552–560, doi:10.3762/bjoc.20.47

• a terminal phenanthroline receptor substituent was synthesized. Upon irradiation in acetonitrile or DMSO with light of 436 nm, they underwent Z–E isomerization of the C=C bond, followed by very fast N→O migration of the acyl group and the formation of nonemissive O-acylated isomers. These isomers

• ]thiophene-3(2Н)-ones 2a–c with a terminal phenanthroline substituent was (E)-2-(((1,10-phenanthrolin-5-yl)amino)methylene)benzo[b]thiophen-3(2H)-one (1), obtained by condensation of 3-hydroxybenzo[b]thiophene-2-carbaldehyde with 5-aminophenanthroline in acetonitrile (Scheme 1). (Z)-N-((3-Oxobenzo[b]thiophen

• )-ylidene)methyl)-N-(1,10-phenanthrolin-5-yl)-2-phenylacetamide (2c), a suspension of 1 in acetonitrile was boiled with phenylacetyl chloride until completely dissolved (Scheme 1 and Supporting Information File 1). The obtained compounds 2a–c existed as an N-acylated keto form. In the IR spectra, stretching

Synthesis and biological profile of 2,3-dihydro[1,3]thiazolo[4,5-b]pyridines, a novel class of acyl-ACP thioesterase inhibitors

• Jens Frackenpohl,
• David M. Barber,
• Guido Bojack,
• Birgit Bollenbach-Wahl,
• Ralf Braun,
• Rahel Getachew,
• Sabine Hohmann,
• Kwang-Yoon Ko,
• Karoline Kurowski,
• Bernd Laber,
• Rebecca L. Mattison,
• Thomas Müller,
• Anna M. Reingruber,
• Dirk Schmutzler and
• Andrea Svejda

Beilstein J. Org. Chem. 2024, 20, 540–551, doi:10.3762/bjoc.20.46

• quantities of the most active compounds for advanced biological testing. Pleasingly, our four-step approach using a potassium O-ethyl dithiocarbonate-mediated formation of thio intermediates 11a–c (thiol–thione tautomers) with subsequent sulfur removal using iron powder in acetic acid [19] proceeded smoothly

• to afford thiazolopyridines 12a–c in good yield. This allowed us to circumvent the previously employed alkylation–oxidation–reduction sequences (Scheme 2) [12]. Thereupon, we recognized that we could introduce two halogen atoms in the halogenation step and carry one through to the end of the

• synthetic route, which enabled us to introduce a methyl substituent in this position. Likewise, methyl-substituted thiazolo[4,5-b]pyridines 5, 15a, and 15c were synthesized using an optimized Suzuki coupling and served together with compounds 12a–c as key intermediates to explore different reagents and

Switchable molecular tweezers: design and applications

• Pablo Msellem,
• Maksym Dekthiarenko,
• Nihal Hadj Seyd and
• Guillaume Vives

Beilstein J. Org. Chem. 2024, 20, 504–539, doi:10.3762/bjoc.20.45

• their solvation sphere occupy part of the cavity and prevent non-coordinating guests from entering the binding cavity. By extending the spacer between the terpy and the arms from a single C–C bond to an amide functional group that also participates in the coordination of the Zn2+, non-coordinating