Spin and charge interactions between nanographene host and ferrocene

• Akira Suzuki,
• Yuya Miyake,
• Ryoga Shibata and
• Kazuyuki Takai

Beilstein J. Org. Chem. 2024, 20, 1011–1019, doi:10.3762/bjoc.20.89

• interference device (SQUID) magnetometer (Quantum Design, MPMS-XL) in the field of 1 T between 2 K and 300 K, where ca. 30 mg of the samples vacuum-sealed in glass tubes (for ACFs and FeCp2-ACFs-150), mounted inside a plastic straw (FeCp2) were used. The Weiss temperature Θ and the temperature-independent term

Synthesis and biological profile of 2,3-dihydro[1,3]thiazolo[4,5-b]pyridines, a novel class of acyl-ACP thioesterase inhibitors

• Jens Frackenpohl,
• David M. Barber,
• Guido Bojack,
• Birgit Bollenbach-Wahl,
• Ralf Braun,
• Rahel Getachew,
• Sabine Hohmann,
• Kwang-Yoon Ko,
• Karoline Kurowski,
• Bernd Laber,
• Rebecca L. Mattison,
• Thomas Müller,
• Anna M. Reingruber,
• Dirk Schmutzler and
• Andrea Svejda

Beilstein J. Org. Chem. 2024, 20, 540–551, doi:10.3762/bjoc.20.46

• ]+ calcd for C15H14FN2OS, 289.0811; found, 289.0806. Biology and biochemistry In vivo greenhouse screening: Seeds of mono- and dicotyledonous weed plants and crop plants were sown in plastic or organic planting pots in sandy loam and covered with soil (replicates: n = 10, i.e., 10 monocotyledonous weed

Synthesis of the 3’-O-sulfated TF antigen with a TEG-N₃ linker for glycodendrimersomes preparation to study lectin binding

• Mark Reihill,
• Hanyue Ma,
• Dennis Bengtsson and
• Stefan Oscarson

Beilstein J. Org. Chem. 2024, 20, 173–180, doi:10.3762/bjoc.20.17

• were carried out under an inert atmosphere of nitrogen in oven-dried glassware with magnetic stirring. N2-flushed plastic syringes were used to transfer air- and moisture-sensitive reagents. All reactions were monitored by thin-layer chromatography (TLC) on Merck® DC-Alufolien plates precoated with

Optimizing reaction conditions for the light-driven hydrogen evolution in a loop photoreactor

• Pengcheng Li,
• Daniel Kowalczyk,
• Johannes Liessem,
• Mohamed M. Elnagar,
• Dariusz Mitoraj,
• Radim Beranek and
• Dirk Ziegenbalg

Beilstein J. Org. Chem. 2024, 20, 74–91, doi:10.3762/bjoc.20.9

• photoreactor consists of three separate parts, the reactor head with a gas inlet and a gas outlet (GL18 thread), the reactor body with draft tube, and the reactor bottom (see Figure 17a). The three parts are assembled using two clamps (plastic black, DN 50) and O-rings. The reactor top has a 29/32 ground joint

Functions of enzyme domains in 2-methylisoborneol biosynthesis and enzymatic synthesis of non-natural analogs

• Binbin Gu,
• Lin-Fu Liang and
• Jeroen S. Dickschat

Beilstein J. Org. Chem. 2023, 19, 1452–1459, doi:10.3762/bjoc.19.104

• (Karlsruhe, Germany) and used without purification. Solvents for column chromatography were purchased in p.a. grade and purified by distillation. Thin-layer chromatography was performed with 0.2 mm precoated plastic sheets Polygram Sil G/UV254 purchased from Machery-Nagel (Düren, Germany). Column

Enabling artificial photosynthesis systems with molecular recycling: A review of photo- and electrochemical methods for regenerating organic sacrificial electron donors

• Grace A. Lowe

Beilstein J. Org. Chem. 2023, 19, 1198–1215, doi:10.3762/bjoc.19.88

• important to replace unrecyclable sacrificial donors in molecular systems. Recently researchers have been looking at replacing traditional sacrificial donors with food and plastic waste [13]. This exciting new field of photoreforming does not involve regeneration of donors or the use of redox mediators, so

Continuous flow synthesis of 6-monoamino-6-monodeoxy-β-cyclodextrin

• János Máté Orosz,
• Dóra Ujj,
• Petr Kasal,
• Gábor Benkovics and
• Erika Bálint

Beilstein J. Org. Chem. 2023, 19, 294–302, doi:10.3762/bjoc.19.25

• been also described [24][25]. Continuous flow approaches have already attracted much attention in the oil, plastic, and fine chemical industries [26]. The vision of faster, safer, cheaper, more flexible and robust production also initiated the paradigm shift from batch reactions to continuous flow

Nostochopcerol, a new antibacterial monoacylglycerol from the edible cyanobacterium Nostochopsis lobatus

• Naoya Oku,
• Saki Hayashi,
• Yuji Yamaguchi,
• Hiroyuki Takenaka and
• Yasuhiro Igarashi

Beilstein J. Org. Chem. 2023, 19, 133–138, doi:10.3762/bjoc.19.13

• , which were left standing until completely dried. A loop of the test organism, suspended in a small amount of water, was mixed with liquefied agar medium precooled to nearly body temperature, and the inoculated medium was quickly poured into a sterile plastic dish. The composition of the medium is 0.5

Revisiting the bromination of 3β-hydroxycholest-5-ene with CBr₄/PPh₃ and the subsequent azidolysis of the resulting bromide, disparity in stereochemical behavior

• Christian Schumacher,
• Jas S. Ward,
• Kari Rissanen,
• Carsten Bolm and
• Mohamed Ramadan El Sayed Aly

Beilstein J. Org. Chem. 2023, 19, 91–99, doi:10.3762/bjoc.19.9

• . Flash chromatography was carried out on silica gel (Baker, 30–60 µm) (Type-I silica gel) and LiChroprep Si 60 (Merck; Ø (15–25 µm) (Type-II silica gel). TLC Monitoring tests were carried out using plastic sheets precoated with silica gel 60 F245 (layer thickness 0.2 mm) purchased from Merck. Spots were

Two-step continuous-flow synthesis of 6-membered cyclic iodonium salts via anodic oxidation

• Julian Spils,
• Thomas Wirth and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2023, 19, 27–32, doi:10.3762/bjoc.19.2

• (Table 1, entry 5). After establishing the optimized reaction conditions for batch, we wanted to find conditions for a flow procedure. It was observed that plastic parts made out of PEEK did not tolerate the acidic conditions in HFIP, and the solvent was changed back to TFE. This worked surprisingly well

Inductive heating and flow chemistry – a perfect synergy of emerging enabling technologies

• Conrad Kuhwald,
• Sibel Türkhan and
• Andreas Kirschning

Beilstein J. Org. Chem. 2022, 18, 688–706, doi:10.3762/bjoc.18.70

• heating has also been used for bonding, heating rubber, deforming plastic, or shrinking workpieces [13][14][15]. These materials are not conductive like steel, copper, or alloys, so another mechanism must take hold to introduce heat. This is often achieved by embedding small superparamagnetic

Study on the interactions between melamine-cored Schiff bases with cucurbit[n]urils of different sizes and its application in detecting silver ions

• Jun-Xian Gou,
• Yang Luo,
• Xi-Nan Yang,
• Wei Zhang,
• Ji-Hong Lu,
• Zhu Tao and
• Xin Xiao

Beilstein J. Org. Chem. 2021, 17, 2950–2958, doi:10.3762/bjoc.17.204

• attracted much attention due to its three-branched structure and excellent physical and chemical properties, which is commonly used in many applications including plastic dishes, the main raw material for formaldehyde resin, etc. [15]. Cucurbit[n]urils (Q[n]s, Scheme 1), a kind of supramolecular compound

The ethoxycarbonyl group as both activating and protective group in N-acyl-Pictet–Spengler reactions using methoxystyrenes. A short approach to racemic 1-benzyltetrahydroisoquinoline alkaloids

• Marco Keller,
• Karl Sauvageot-Witzku,
• Franz Geisslinger,
• Nicole Urban,
• Michael Schaefer,
• Karin Bartel and
• Franz Bracher

Beilstein J. Org. Chem. 2021, 17, 2716–2725, doi:10.3762/bjoc.17.183

• Merck (Darmstadt, Germany), all other solvents were purified by distillation. All reactions were monitored by thin-layer chromatography (TLC) using precoated plastic sheets POLYGRAM® SIL G/UV254 from Macherey-Nagel and detected by irradiation with UV light (254 nm). Flash column chromatography (FCC) was

Volatile emission and biosynthesis in endophytic fungi colonizing black poplar leaves

• Christin Walther,
• Pamela Baumann,
• Katrin Luck,
• Beate Rothe,
• Peter H. W. Biedermann,
• Jonathan Gershenzon,
• Tobias G. Köllner and
• Sybille B. Unsicker

Beilstein J. Org. Chem. 2021, 17, 1698–1711, doi:10.3762/bjoc.17.118

• diameter) growing on PDA. The mycelium was flash frozen in liquid nitrogen and ground using plastic pestles in 1.5 mL Eppendorf tubes. After homogenization of the mycelium, 500 µL extraction buffer (100 mM Tris HCl, pH 8; 10 mM EDTA, pH 8; 2% w/v SDS) and 100 µL proteinase K (Sigma) were added and the

Enhanced target cell specificity and uptake of lipid nanoparticles using RNA aptamers and peptides

• Roslyn M. Ray,
• Anders Højgaard Hansen,
• Maria Taskova,
• Bernhard Jandl,
• Jonas Hansen,
• Citra Soemardy,
• Kevin V. Morris and
• Kira Astakhova

Beilstein J. Org. Chem. 2021, 17, 891–907, doi:10.3762/bjoc.17.75

• Nano ZS (Malvern Instruments, UK), having He–Ne 633 nm laser at an angle of detection of 90°, with an incubation time of 60 s. Samples were diluted 50-fold in Milli-Q water and placed into the disposable plastic cuvettes for measurement performed in triplicates (n ≥ 3) to obtain a mean value. NTA

Valorisation of plastic waste via metal-catalysed depolymerisation

• Francesca Liguori,
• Carmen Moreno-Marrodán and
• Pierluigi Barbaro

Beilstein J. Org. Chem. 2021, 17, 589–621, doi:10.3762/bjoc.17.53

• selective depolymerisation methods of plastics. Achievements are broken down according to the plastic material, namely polyolefins, polyesters, polycarbonates and polyamides. The focus is on recent advancements targeting sustainable and environmentally friendly processes. Biocatalytic or unselective

• processes, acid–base treatments as well as the production of fuels are not discussed, nor are the methods for the further upgrade of the depolymerisation products. Keywords: catalysis; depolymerisation; plastic; recycling; sustainable; Review 1. Introduction In a circular-economy perspective, wastes are

• ][10]. Plastic materials are ubiquitous in our everyday life, which accounts for a global production of plastics of around 360 million tons in 2018 [11], of which more than 60% are disposed [12][13]. As a consequence, pollution from plastics is impressive, resulting in the diffusion of microplastics

Tools for generating and analyzing glycan microarray data

• Akul Y. Mehta,
• Jamie Heimburg-Molinaro and
• Richard D. Cummings

Beilstein J. Org. Chem. 2020, 16, 2260–2271, doi:10.3762/bjoc.16.187

• , which in turn would depend upon the number of glycans to be printed. The larger the number of glycans printed per array, the larger the printed area is, and hence lower number of arrays per slide. The chambers are usually made of plastic with a silicone rubber gasket that fits on top of the slide (for

• simultaneously with minimal sample volumes. Although usually inert to biological samples, a precautionary test should be performed to ensure that the GBP sample is compatible with the gasket/chamber materials. The chambers can be covered with parafilm or plastic plate covers to further isolate each well and

Design, synthesis and application of carbazole macrocycles in anion sensors

• Alo Rüütel,
• Ville Yrjänä,
• Sandip A. Kadam,
• Indrek Saar,
• Mihkel Ilisson,
• Astrid Darnell,
• Kristjan Haav,
• Tõiv Haljasorg,
• Lauri Toom,
• Johan Bobacka and
• Ivo Leito

Beilstein J. Org. Chem. 2020, 16, 1901–1914, doi:10.3762/bjoc.16.157

• was an opening with an adjustable plastic plug, which can be used to empty the outer filling solution compartment, and the greater standard deviations in the results could be explained by slight differences in the flow of chloride between measurements. These variations in flow rate were likely due to

Three new O-isocrotonyl-3-hydroxybutyric acid congeners produced by a sea anemone-derived marine bacterium of the genus Vibrio

• Dandan Li,
• Enjuro Harunari,
• Tao Zhou,
• Naoya Oku and
• Yasuhiro Igarashi

Beilstein J. Org. Chem. 2020, 16, 1869–1874, doi:10.3762/bjoc.16.154

• nature biodegradable, can be produced from renewable bioresources, and have material properties close to the conventional petroleum-derived plastics, the commercial production and market development are actively pursued by several companies amid the growing plastic waste crisis [14][15]. Vibrio are

Disposable cartridge concept for the on-demand synthesis of turbo Grignards, Knochel–Hauser amides, and magnesium alkoxides

• Mateo Berton,
• Kevin Sheehan,
• Andrea Adamo and
• D. Tyler McQuade

Beilstein J. Org. Chem. 2020, 16, 1343–1356, doi:10.3762/bjoc.16.115

• the dispensed liquid is enclosed in a plastic reservoir, provides the advantage of not dissolving any gas into the liquid during the operation, which is the case for pressurized tanks. Additionally, all the wetted parts of the pump are fully disposable (Figure 3E). The metering function required to

Isolation of fungi using the diffusion chamber device FIND technology

• Benjamin Libor,
• Henrik Harms,
• Stefan Kehraus,
• Ekaterina Egereva,
• Max Crüsemann and
• Gabriele M. König

Beilstein J. Org. Chem. 2019, 15, 2191–2203, doi:10.3762/bjoc.15.216

• sample collection, to ensure favourable growth conditions for specific fungi. Inoculation is performed in only one step and thus suitable for high throughput approaches. Scheme 1 illustrates the FIND, consisting of merely three plastic parts crafted from polyoxymethylene, which are solid and durable

• enough for use in most natural environments. The central plate is a thin plastic board with 96 through holes that function as compartments, capable of holding inoculated agar plugs. Semipermeable membranes are attached to both sides of this plate, this way covering the through holes and preventing

Harnessing enzyme plasticity for the synthesis of oxygenated sesquiterpenoids

• Melodi Demiray,
• David J. Miller and
• Rudolf K. Allemann

Beilstein J. Org. Chem. 2019, 15, 2184–2190, doi:10.3762/bjoc.15.215

• synthesised in amorphadiene synthase-catalysed reactions from 8- and 12-methoxyfarnesyl diphosphates due to the highly plastic yet tightly controlled carbocationic chemistry of this sesquiterpene cyclase. Keywords: artemisinin; amorphadiene synthase; oxygenated terpenoids; sesquiterpenoids; substrate

Archangelolide: A sesquiterpene lactone with immunobiological potential from Laserpitium archangelica

• Silvie Rimpelová,
• Michal Jurášek,
• Lucie Peterková,
• Jiří Bejček,
• Vojtěch Spiwok,
• Miloš Majdl,
• Michal Jirásko,
• Miloš Buděšínský,
• Juraj Harmatha,
• Eva Kmoníčková,
• Pavel Drašar and
• Tomáš Ruml

Beilstein J. Org. Chem. 2019, 15, 1933–1944, doi:10.3762/bjoc.15.189

• and background-corrected by xCellence software. Animals and cells For isolation of resident peritoneal macrophages, female Wistar rats weighing 175–185 g (VELAZ, Czech Republic) were used. They were kept in plastic cages under standard conditions, i.e., a temperature of 22 ± 2 °C, 12/12 h of light

Molecular basis for the plasticity of aromatic prenyltransferases in hapalindole biosynthesis

• Takayoshi Awakawa and
• Ikuro Abe

Beilstein J. Org. Chem. 2019, 15, 1545–1551, doi:10.3762/bjoc.15.157

• Aromatic prenyltransferases (PTases) are enzymes that catalyze Friedel–Crafts reactions between aromatic compounds and isoprenoid diphosphates. In hapalindole biosynthesis, the aromatic PTases AmbP1 and AmbP3 exhibit surprisingly plastic selectivities. AmbP1 not only transfers the geranyl group on the C-3

Organometallic vs organic photoredox catalysts for photocuring reactions in the visible region

• Aude-Héloise Bonardi,
• Frédéric Dumur,
• Guillaume Noirbent,
• Jacques Lalevée and
• Didier Gigmes

Beilstein J. Org. Chem. 2018, 14, 3025–3046, doi:10.3762/bjoc.14.282

• industrial fields. About 45% of the manufactured plastic material and 40% of synthetic rubber are produced by free radical polymerization worldwide [23]. In both cases, the photoredox catalyst, used as PS, absorbs the light and goes to its excited state. Then, there are two possibilities: the photoredox