Catalytic asymmetric synthesis of biologically important 3-hydroxyoxindoles: an update

• Bin Yu,
• Hui Xing,
• De-Quan Yu and
• Hong-Min Liu

Beilstein J. Org. Chem. 2016, 12, 1000–1039, doi:10.3762/bjoc.12.98

• group described the first chiral imidodiphosphoric acid-catalyzed enantioselective Friedel–Crafts reactions of indoles and pyrroles with 3-hydroxy-3-indolyloxindoles, giving the 3,3-diaryloxindoles in excellent yields (99% yield) and with excellent enantioselectivities (98% ee) at low catalyst loading

A convenient route to symmetrically and unsymmetrically substituted 3,5-diaryl-2,4,6-trimethylpyridines via Suzuki–Miyaura cross-coupling reaction

• Dariusz Błachut,
• Joanna Szawkało and
• Zbigniew Czarnocki

Beilstein J. Org. Chem. 2016, 12, 835–845, doi:10.3762/bjoc.12.82

• teams in the construction of polyarylated benzenes [56], pyridines [57][58][59][60], thiophenes [61][62], quinoxalines [63], pyrazoles [64] pyrroles [65], pyrimidines [66][67], benzofuranes [68], imidazo[1,2-a]pyridines [69], diaryl/heteroaryl methanes [70], and indoles [71], bearing differently

• construction of unsymmetrically arylated pyrroles, thiophenes and 2,6- and 3,5-diarylpyridines. In order to test the utility of the above mentioned approach, a series of trial cross couplings were performed on a microscale according to route 3 with a variety of electron-poor and electron-rich boronic acids

Creating molecular macrocycles for anion recognition

• Amar H. Flood

Beilstein J. Org. Chem. 2016, 12, 611–627, doi:10.3762/bjoc.12.60

• produce shorter, stronger contacts. Calix[4]pyrroles are a case in point [18]. This conformational rearrangement cannot occur within the triazolophane and so, while the fluoride may have shorter hydrogen bonds, it has fewer contacts than chloride. For iodide, it is simply too big for a single

Hydroquinone–pyrrole dyads with varied linkers

• Hao Huang,
• Christoffer Karlsson,
• Maria Strømme,
• Martin Sjödin and
• Adolf Gogoll

Beilstein J. Org. Chem. 2016, 12, 89–96, doi:10.3762/bjoc.12.10

• , Box 576, SE-751 23 Uppsala, Sweden 10.3762/bjoc.12.10 Abstract A series of pyrroles functionalized in the 3-position with p-dimethoxybenzene via various linkers (CH2, CH2CH2, CH=CH, C≡C) has been synthesized. Their electronic properties have been deduced from 1H NMR, 13C NMR, and UV–vis spectra to

• organic electrical energy storage [6]. Structure of pyrrole/hydroquinone derivatives 3-(2,5-dimethoxyphenyl)-1H-pyrrole (1) and 3-(1,4-dihydroxyphenyl)-1H-pyrrole (2) [5]. Hydroquinone dimethyl ether functionalized pyrroles with linkers L discussed in this study. 1H NMR spectra (400 MHz, CDCl3 solution

Star-shaped tetrathiafulvalene oligomers towards the construction of conducting supramolecular assembly

• Masahiko Iyoda and
• Masashi Hasegawa

Beilstein J. Org. Chem. 2015, 11, 1596–1613, doi:10.3762/bjoc.11.175

• –32°, indicating the conformational flexibility of the pyrrole–benzene linkage. The calculated torsion angles between the pyrroles and central benzenes of 38, 40, and 42 are 34, 45, and 59°, respectively, and the non-planar structures of 38, 40, and 42 are in good agreement with the high-field shift

• of α-protons of pyrroles in the 1H NMR spectra: δ 6.89 (38), 6.41 (40), 5.93 ppm (42). Star-shaped TTF 10-mer 44 was also synthesized by SNAr reaction of the sodium salt of 36 with decafluorobiphenyl (44%) [75] (Figure 13). In the CV measurements (Figure 14), tetrasubstituted 40 shows typical two

Deproto-metallation of N-arylated pyrroles and indoles using a mixed lithium–zinc base and regioselectivity-computed CH acidity relationship

• Mohamed Yacine Ameur Messaoud,
• Ghenia Bentabed-Ababsa,
• Madani Hedidi,
• Aïcha Derdour,
• Floris Chevallier,
• Yury S. Halauko,
• Oleg A. Ivashkevich,
• Vadim E. Matulis,
• Laurent Picot,
• Valérie Thiéry,
• Thierry Roisnel,
• Vincent Dorcet and
• Florence Mongin

Beilstein J. Org. Chem. 2015, 11, 1475–1485, doi:10.3762/bjoc.11.160

• , Centre de Diffractométrie X, Institut des Sciences Chimiques de Rennes, UMR 6226, CNRS-Université de Rennes 1, Bâtiment 10B, Campus de Beaulieu, 35042 Rennes, France 10.3762/bjoc.11.160 Abstract The synthesis of N-arylated pyrroles and indoles is documented, as well as their functionalization by

• deprotonative metallation using the base in situ prepared from LiTMP and ZnCl2·TMEDA (1/3 equiv). With N-phenylpyrrole and -indole, the reactions were carried out in hexane containing TMEDA which regioselectively afforded the 2-iodo derivatives after subsequent iodolysis. With pyrroles and indoles bearing N

• using the DFT B3LYP method in order to rationalize the experimental results. Keywords: CH acidity; indoles; iodolysis; mixed lithium–zinc bases; pyrroles; Introduction Pyrrole occurs in very important natural products such as tetrapyrrolic (linear) bilirubinoids, and (cyclic) porphyrins and corrins

Cathodic hydrodimerization of nitroolefins

• Michael Weßling and
• Hans J. Schäfer

Beilstein J. Org. Chem. 2015, 11, 1163–1174, doi:10.3762/bjoc.11.131

• caused by the NH groups of the pyrroles. Their hydrogen bonds could influence the relative energies of the transition states leading to the diastereomers. One of the two meso-configurations can be assigned to isomer 22a because of the missing coupling between the benzylic methine protons. The 1H NMR data

Advances in the synthesis of functionalised pyrrolotetrathiafulvalenes

• Luke J. O’Driscoll,
• Sissel S. Andersen,
• Marta V. Solano,
• Dan Bendixen,
• Morten Jensen,
• Troels Duedal,
• Jess Lycoops,
• Cornelia van der Pol,
• Rebecca E. Sørensen,
• Karina R. Larsen,
• Kenneth Myntman,
• Christian Henriksen,
• Stinne W. Hansen and
• Jan O. Jeppesen

Beilstein J. Org. Chem. 2015, 11, 1112–1122, doi:10.3762/bjoc.11.125

• systems [11][27], to the incorporation of MPTTFs and BPTTFs into more complex molecular architectures such as macrocycles [8][9][14], calix-pyrroles [1][10][11], calixarenes [29] and porphyrins [30]. Note that for MPTTFs, R1 and R2 can be either the same or different. Here, we present recent developments

2-(1-Hydroxypropyn-2-yl)-1-vinylpyrroles: the first successful Favorsky ethynylation of pyrrolecarbaldehydes

• A. V. Ivanov,
• V. S. Shcherbakova,
• I. A. Ushakov,
• L. N. Sobenina,
• O. V. Petrova,
• A. I. Mikhaleva and
• B. A. Trofimov

Beilstein J. Org. Chem. 2015, 11, 228–232, doi:10.3762/bjoc.11.25

• modified conditions of the Favorsky reaction has been implemented to pave an expedient route to important biomolecules containing a pyrrole ring. Keywords: acetylene; ethynylation; Favorsky reaction; 1-vinylpyrrole-2-carbaldehyde; Introduction Functionalized pyrroles bearing a terminal acetylenic moiety

• and hydroxy function as substituents, particularly 2-(1-hydroxypropyn-2-yl)pyrroles, represent important biomolecular intermediates and attractive synthetic building blocks for drug precursors. Currently, they find a growing application in the synthesis of protein kinase inhibitors or modulators [1

• ] and novel cyclin-dependent kinase inhibitors [2]. Such functionalized pyrroles are intermediates for endothelial differentiation gene (EDG-1) receptor antagonists. The latter are effective in preventing and/or treating inflammations, diseases associated with abnormal angiogenesis, cerebral vascular

Enhancing the reactivity of 1,2-diphospholes in cycloaddition reactions

• Almaz Zagidullin,
• Vasili Miluykov,
• Elena Oshchepkova,
• Artem Tufatullin,
• Olga Kataeva and
• Oleg Sinyashin

Beilstein J. Org. Chem. 2015, 11, 169–173, doi:10.3762/bjoc.11.17

• significant interest for the preparation of highly effective catalysts, materials for light-emitting diodes and nonlinear optics [3][4]. In contrast to furans, thiophenes and pyrroles, phospholes display cycloaddition and complexation reactions and can be used as starting materials for caged phosphines

Efficient deprotection of F-BODIPY derivatives: removal of BF₂ using Brønsted acids

• Mingfeng Yu,
• Joseph K.-H. Wong,
• Cyril Tang,
• Peter Turner,
• Matthew H. Todd and
• Peter J. Rutledge

Beilstein J. Org. Chem. 2015, 11, 37–41, doi:10.3762/bjoc.11.6

• diversifying the F-BODIPY framework [9]. F-BODIPYs are readily prepared by condensing aldehydes, acyl chlorides or anhydrides with pyrroles and trapping the resulting dipyrrin in situ with boron trifluoride [9][10][11]. F-BODIPYs are generally stable and chemically robust, with photophysical properties that

Palladium-catalyzed 2,5-diheteroarylation of 2,5-dibromothiophene derivatives

• Fatma Belkessam,
• Aidene Mohand,
• Jean-François Soulé,
• Abdelhamid Elias and
• Henri Doucet

Beilstein J. Org. Chem. 2014, 10, 2912–2919, doi:10.3762/bjoc.10.309

• –2 mol % palladium catalysts, the target 2,5-diheteroarylated thiophenes were obtained in moderate to good yields and with a wide variety of heteroarenes such as thiazoles, thiophenes, furans, pyrroles, pyrazoles or isoxazoles. Moreover, sequential heteroarylation reactions allow the access to 2,5

• promotes the 2,5-diheteroarylation of 2,5-dibromothiophene in the presence of a variety of heteroarenes such as thiophenes, furans, pyrroles, pyrazoles or isoxazoles as the coupling partners. The sequential diheteroarylation of 2,5-dibromothiophene was also found to be possible to afford 2,5

Lewis acid-catalyzed redox-neutral amination of 2-(3-pyrroline-1-yl)benzaldehydes via intramolecular [1,5]-hydride shift/isomerization reaction

• Chun-Huan Jiang,
• Xiantao Lei,
• Le Zhen,
• Hong-Jin Du,
• Xiaoan Wen,
• Qing-Long Xu and
• Hongbin Sun

Beilstein J. Org. Chem. 2014, 10, 2892–2896, doi:10.3762/bjoc.10.306

• mL) at room temperature or reflux and monitored by TLC. After completion of the reaction (about 24 h), the solvent was removed by evaporation and the residue was purified by flash column chromatography on silica gel to give N-arylpyrrole 3. Synthesis of N-substituted pyrroles via redox-neutral

Gold(I)-catalysed synthesis of a furan analogue of thiamine pyrophosphate

• Amjid Iqbal,
• El-Habib Sahraoui and
• Finian J. Leeper

Beilstein J. Org. Chem. 2014, 10, 2580–2585, doi:10.3762/bjoc.10.270

• dehydrative cyclisation reaction of alkynyl alcohols catalysed by simple gold(I) salts [31]. The reaction proceeds rapidly under mild, open flask conditions to provide aromatic heterocycles such as furans, pyrroles and thiophenes in high yield with low catalyst loadings (Scheme 2). Following this synthetic

New highlights of the syntheses of pyrrolo[1,2-a]quinoxalin-4-ones

• Emilian Georgescu,
• Alina Nicolescu,
• Florentina Georgescu,
• Florina Teodorescu,
• Daniela Marinescu,
• Ana-Maria Macsim and
• Calin Deleanu

Beilstein J. Org. Chem. 2014, 10, 2377–2387, doi:10.3762/bjoc.10.248

• constituent of several bioactive heterocyclic compounds that demonstrate interesting activity against Mycobacterium tuberculosis [1], anti-HIV [2], anticancer [3], and it modulates the estrogen receptor activity [4]. Synthetic methods towards pyrrolo[1,2-a]quinoxaline derivatives based on pyrroles [5], or

Allenylphosphine oxides as simple scaffolds for phosphinoylindoles and phosphinoylisocoumarins

• G. Gangadhararao,
• Ramesh Kotikalapudi,
• M. Nagarjuna Reddy and
• K. C. Kumara Swamy

Beilstein J. Org. Chem. 2014, 10, 996–1005, doi:10.3762/bjoc.10.99

• series include phosphonobenzofurans/indenones [21][22], -pyrazoles [23], -chromenes/thiochromenes [24][25], -pyrroles [26], multiply substituted furans [27], indolopyran-1-ones [28], N-hydroxyindolinones [29], and oxindoles [30]. In the reaction shown in Scheme 1a, for the formation of the

One-pot three-component synthesis and photophysical characteristics of novel triene merocyanines

• Christian Muschelknautz,
• Robin Visse,
• Jan Nordmann and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2014, 10, 599–612, doi:10.3762/bjoc.10.51

• convergent strategies paved the way to luminescent push–pull dienes 1–4 with conformationally flexible and fixed acceptor units (Figure 1) [30][31][32], pyrazoles [33][34], benzodiazepines [35], furans and pyrroles [36][37] by consecutive multicomponent reactions and to highly emissive spirocycles [38][39

Simple two-step synthesis of 2,4-disubstituted pyrroles and 3,5-disubstituted pyrrole-2-carbonitriles from enones

• Murat Kucukdisli,
• Dorota Ferenc,
• Marcel Heinz,
• Christine Wiebe and
• Till Opatz

Beilstein J. Org. Chem. 2014, 10, 466–470, doi:10.3762/bjoc.10.44

• .10.44 Abstract The cyclocondensation of enones with aminoacetonitrile furnishes 3,4-dihydro-2H-pyrrole-2-carbonitriles which can be readily converted to 2,4-disubstituted pyrroles by microwave-induced dehydrocyanation. Alternatively, oxidation of the intermediates produces 3,5-disubstituted pyrrole-2

• -carbonitriles. Keywords: α-aminonitriles; cyclization; heterocycles; microwave-assisted synthesis; pyrroles; Introduction Heterocycles are the largest class of organic compounds [1]. Among them, pyrroles have a distinguished position in the chemistry of living organisms due to their close biogenetic

• )nitriles can be used as versatile and readily accessible pronucleophiles, e.g. for the construction of γ-amino acids [32], pyrrolidines [33], as well as pyrroles [34][35]. If an additional conjugated double bond is present, the anions of α-(alkylideneamino)nitriles 3 can undergo an electrocyclic ring

Synthesis of five- and six-membered cyclic organic peroxides: Key transformations into peroxide ring-retaining products

• Alexander O. Terent'ev,
• Dmitry A. Borisov,
• Vera A. Vil’ and
• Valery M. Dembitsky

Beilstein J. Org. Chem. 2014, 10, 34–114, doi:10.3762/bjoc.10.6

• -phenoxyphenyl)hexahydro[1,2]dioxolo[3,4-b]pyrroles 24a and 24b were synthesized from (Z)-N-(hex-3-enyl)-N-(4-phenoxyphenyl)acetamide (22). It was suggested that aminocyclopropane 23 is formed in situ, which is subsequently oxidized in air on silica gel (Scheme 8) [238]. The total yield of both isomers 24 was 31

Recent advances in transition metal-catalyzed Csp²-monofluoro-, difluoro-, perfluoromethylation and trifluoromethylthiolation

• Grégory Landelle,
• Armen Panossian,
• Sergiy Pazenok,
• Jean-Pierre Vors and
• Frédéric R. Leroux

Beilstein J. Org. Chem. 2013, 9, 2476–2536, doi:10.3762/bjoc.9.287

• -subsituted alkenes were sometimes obtained along with the desired addition products (Scheme 9). Afterwards, N. Kamigata et al. applied this system to arenes [99] and heteroarenes (furans, pyrroles and thiophenes) [102][103][104] and gave a full account of this work (Scheme 9) [101]. Monosubstituted benzenes

• is applicable to pyrroles bearing a small group on nitrogen, which gave the 2-perfluoroalkylated compound as the major product. For instance, N-TMS-pyrrole afforded a global yield of 78% of the 2-functionalized product as a mixture of the silylated and hydrolized compounds. On the other hand, the

• of N. Kamigata et al. is that the reaction takes place under photoredox catalysis, allowing much milder reaction conditions (23 °C for D. W. C. MacMillan et al. vs 120 °C for N. Kamigata et al.). Higher yields were obtained, especially in the case of pyrroles (2-Rf-pyrrole: 88% yield for D. W. C

Microwave-assisted synthesis of 5,6-dihydroindolo[1,2-a]quinoxaline derivatives through copper-catalyzed intramolecular N-arylation

• Fei Zhao,
• Lei Zhang,
• Hailong Liu,
• Shengbin Zhou and
• Hong Liu

Beilstein J. Org. Chem. 2013, 9, 2463–2469, doi:10.3762/bjoc.9.285

• , the copper-catalyzed N-arylation has been extensively utilized for C–N coupling, especially for the arylation of N-containing heterocycles such as indoles, imidazoles, indazoles, pyrroles, pyrazoles and triazoles [25][26][27][28] to construct more fused heterocycles. In recent years, several

Zinc–gold cooperative catalysis for the direct alkynylation of benzofurans

• Yifan Li and
• Jérôme Waser

Beilstein J. Org. Chem. 2013, 9, 1763–1767, doi:10.3762/bjoc.9.204

• knowledge, the direct alkynylation of benzofurans is still an unknown process. Since 2009, our group has developed a mild gold-catalyzed [14][15][16][17] method for the alkynylation of electron-rich aryls such as indoles and pyrroles [18], thiophenes [19], anilines [20] and furans [21]. Key for success was

An organocatalytic route to 2-heteroarylmethylene decorated N-arylpyrroles

• Alexandre Jean,
• Jérôme Blanchet,
• Jacques Rouden,
• Jacques Maddaluno and
• Michaël De Paolis

Beilstein J. Org. Chem. 2013, 9, 1480–1486, doi:10.3762/bjoc.9.168

• preparation of N-arylpyrroles is an active field of investigation [5]. Depending on their substituents, N-arylpyrroles could also be electron donor/acceptor molecules with a dual fluorescence ability suggesting attractive optoelectronic applications [6][7]. If the N-arylation of pyrroles is possible by

• Ullmann-type condensation [8][9][10], the regioselective functionalization of pyrroles is less trivial when asymmetric substrates are targeted. An indirect solution, based on the construction of substituted pyrrolidines that oxidize into elaborated pyrroles, can be employed fruitfully [11][12]. We

• –h were transformed into the corresponding pyrroles 5b–i with homogeneous efficiency. Hence, the chemistry proved to be compatible with substrates containing meta-, para-pyridyl and quinolinyl substituents, allowing the preparation of 5b (81%), 5c (78%) and 5d (98%). Pyrrolidine 4e containing an

Expeditious, mechanochemical synthesis of BODIPY dyes

• Laramie P. Jameson and
• Sergei V. Dzyuba

Beilstein J. Org. Chem. 2013, 9, 786–790, doi:10.3762/bjoc.9.89

• . Accordingly, the condensation of pyrroles with aldehydes (Scheme 1a) is the more commonly utilized synthetic approach [1][2]. Notably, both approaches are carried out under an inert atmosphere. Overall, based on literature accounts, BODIPY synthesis requires long reaction times (several hours to several days

• ) and isolation of the dyes is performed by chromatography, with poor to moderate (10–50%) yields. In this light, a more expedient synthesis of the BODIPY dyes is desired. Toward this end, we reasoned that the condensation step between the 2-substituted pyrroles and aldehydes (or acid chlorides) should

• condensation between pyrroles and acid chlorides produced dyes 8 and 9 in relatively low yields of 21% and 10%, respectively. It should be pointed out that in the case of dye 9 (and unlike the synthesis of 8), the condensation step between 2,4-dimethylpyrrole and benzoyl chloride appeared to be sluggish

3-Pyridylnitrene, 2- and 4-pyrimidinylcarbenes, 3-quinolylnitrenes, and 4-quinazolinylcarbenes. Interconversion, ring expansion to diazacycloheptatetraenes, ring opening to nitrile ylides, and ring contraction to cyanopyrroles and cyanoindoles

• Curt Wentrup,
• Nguyen Mong Lan,
• Adelheid Lukosch,
• Pawel Bednarek and
• David Kvaskoff

Beilstein J. Org. Chem. 2013, 9, 743–753, doi:10.3762/bjoc.9.84

• undergo ring opening to the nitrile ylide 37. Sigmatropic shifts of H, CN, or CH3 in the 3H-pyrroles 32 and 38 lead to the final products. We have previously reported strong evidence for the ring expansion of a 2-pyrimidinylcarbene 39 to a diazacycloheptatetraene 40 and subsequent ring contraction to a 3

• separated by GC on the Carbowax column. The yields of 2,6-dimethyl-3-cyanopyrrole (25), 2,4-dimethyl-3-cyanopyrrole (26) and 3,5-dimethyl-2-cyanopyrrole (27) at various temperatures are collected in Table 1. Yields were determined by GC, and the pyrroles were characterized as follows: 2,6-Dimethyl-3