Direct synthesis of acyl fluorides from carboxylic acids using benzothiazolium reagents

• Lilian M. Maas,
• Alex Haswell,
• Rory Hughes and
• Matthew N. Hopkinson

Beilstein J. Org. Chem. 2024, 20, 921–930, doi:10.3762/bjoc.20.82

• Kingdom 10.3762/bjoc.20.82 Abstract 2-(Trifluoromethylthio)benzothiazolium triflate (BT-SCF3) was used as deoxyfluorinating reagent for the synthesis of versatile acyl fluorides directly from the corresponding carboxylic acids. These acyl fluorides were reacted with amines in a one-pot protocol to form

• developed a series of 2-(fluoroalkylthio)benzothiazolium (BT-SRF) reagents for the deoxygenative transfer of SRF (RF = poly- or perfluoroalkyl) groups into organic molecules (Figure 1). In an initial report, the trifluoromethylthio-containing salt, BT-SCF3, was reacted with unactivated aliphatic alcohols to

Transition-metal-catalyzed C–H bond activation as a sustainable strategy for the synthesis of fluorinated molecules: an overview

• Louis Monsigny,
• Floriane Doche and
• Tatiana Besset

Beilstein J. Org. Chem. 2023, 19, 448–473, doi:10.3762/bjoc.19.35

• of N-(trifluoromethylthio)saccharine (VI, Shen’s reagent) as both oxidant and electrophilic source (18 examples, up to 91% yield). Indoles bearing various electron-donating and electron-withdrawing groups as well as halogens at the C5-position and at the C6-position were functionalized in high yields

Metal-free visible-light-enabled vicinal trifluoromethyl dithiolation of unactivated alkenes

• Xiaojuan Li,
• Qiang Zhang,
• Weigang Zhang,
• Jinzhu Ma,
• Yi Wang and
• Yi Pan

Beilstein J. Org. Chem. 2021, 17, 551–557, doi:10.3762/bjoc.17.49

• , Nanjing 210023, China School of pharmacy, Wannan Medical College, Wuhu, 241002, China 10.3762/bjoc.17.49 Abstract The difunctionalization of alkenes involving a trifluoromethylthio group (SCF3) for the conversion of versatile and readily available olefins into structurally more complex molecules has been

• successfully studied. However, the disproportionate dithiolation of alkenes is unknown. Herein, a transition-metal-free protocol is presented for the vicinal trifluoromethylthio–thiolation of unactivated alkenes via a radical process under mild conditions with a broad substrate scope and excellent tolerance

• by introducing fluorine-containing (such as -CF3, -CF2H, -C2F5, -SCF3, -OCF3) moieties has become a substantial strategy for medicinal research [2][7][8]. Among the fluorinated functionalities, the trifluoromethylthio group (SCF3) has strong electron-withdrawing properties and a higher lipophilicity

Decarboxylative trifluoromethylthiolation of pyridylacetates

• Ryouta Kawanishi,
• Kosuke Nakada and
• Kazutaka Shibatomi

Beilstein J. Org. Chem. 2021, 17, 229–233, doi:10.3762/bjoc.17.23

• achieved using N-(trifluoromethylthio)benzenesulfonimide as the electrophilic trifluoromethylthiolation reagent. The reaction afforded the corresponding trifluoromethyl thioethers in good yield. Furthermore, the preparation of lithium pyridylacetates by saponification of the corresponding methyl esters and

• ]. Introducing a trifluoromethylthio group (CF3S–), which has high lipophilicity and strong electron-withdrawing properties, into medicinal compounds can improve their pharmacokinetic properties [7][8][9][10][11]. Hence, the development of a synthetic method for the preparation of trifluoromethyl thioethers has

• trifluoromethylthio group at a pyridylic carbon. Results and Discussion First, we synthesized lithium 2-pyridylacetate 1a according to our previously reported procedure [21] and subjected it to decarboxylative trifluoromethylthiolation with N-trifluoromethylthiosuccinimide (4) in DMF at room temperature for 15 h

Exploring the possibility of using fluorine-involved non-conjugated electron-withdrawing groups for thermally activated delayed fluorescence emitters by TD-DFT calculation

• Dongyang Chen and
• Eli Zysman-Colman

Beilstein J. Org. Chem. 2021, 17, 210–223, doi:10.3762/bjoc.17.21

• thermally activated delayed fluorescence (TADF) emitters. In the present study, we investigate computationally the potential of other fluorine-containing acceptors, trifluoromethoxy (OCF3), trifluoromethylthio (SCF3), and pentafluorosulfanyl (SF5), within two families of donor–acceptor TADF emitters. Time

• states between S1 and T1, thus likely leading to a very efficient reverse intersystem crossing in these compounds. Keywords: DFT calculation; pentafluorosulfanyl; spin-orbit coupling; TADF; trifluoromethoxy; trifluoromethylthio; Introduction Organic thermally activated delayed fluorescence (TADF

• within TADF emitter design (Figure 1) [25][26][27]. In the present study, we report on the impact of incorporating other fluorine-containing electron-withdrawing groups beyond trifluoromethyl (CF3), including trifluoromethoxy (OCF3), trifluoromethylthio (SCF3), and pentafluorosulfanyl (SF5) groups, and

Benzothiazolium salts as reagents for the deoxygenative perfluoroalkylthiolation of alcohols

• Armin Ariamajd,
• Nils J. Gerwien,
• Benjamin Schwabe,
• Stefan Dix and
• Matthew N. Hopkinson

Beilstein J. Org. Chem. 2021, 17, 83–88, doi:10.3762/bjoc.17.8

• trifluoromethylthio group (SCF3), for example, is attracting considerable attention due to its strong lipophilicity-enhancing influence (Hansch constant π = 1.44) and electron-withdrawing properties (Hammett constants σp = 0.50 and σm = 0.40) [7][8][9][10][11][12]. On the other hand, longer-chain perfluoroalkylthio

Cascade trifluoromethylthiolation and cyclization of N-[(3-aryl)propioloyl]indoles

• Ming-Xi Bi,
• Shuai Liu,
• Yangen Huang,
• Xiu-Hua Xu and
• Feng-Ling Qing

Beilstein J. Org. Chem. 2020, 16, 657–662, doi:10.3762/bjoc.16.62

• involved in these transformations. Keywords: cyclization; indole derivatives; oxidation; radical reaction; trifluoromethylthiolation; Introduction The trifluoromethylthio (SCF3) group could significantly improve the lipophilicity of organic molecules as shown by its high Hansch constant (π = 1.44 for

Recent advances in transition-metal-catalyzed incorporation of fluorine-containing groups

• Xiaowei Li,
• Xiaolin Shi,
• Xiangqian Li and
• Dayong Shi

Beilstein J. Org. Chem. 2019, 15, 2213–2270, doi:10.3762/bjoc.15.218

• has emerged as a powerful method for the construction of these compounds. This review attempts to describe the major advances in the transition-metal-catalyzed incorporation of fluorine, trifluoromethyl, difluoromethyl, trifluoromethylthio, and trifluoromethoxy groups reported between 2011 and 2019

CF₃SO₂X (X = Na, Cl) as reagents for trifluoromethylation, trifluoromethylsulfenyl-, -sulfinyl- and -sulfonylation. Part 1: Use of CF₃SO₂Na

• Hélène Guyon,
• Hélène Chachignon and
• Dominique Cahard

Beilstein J. Org. Chem. 2017, 13, 2764–2799, doi:10.3762/bjoc.13.272

• using sodium bromate, NaBrO3, as a bromine source (Scheme 22) [43]. The photoredox-catalysed chloro-, bromo- and also (trifluoromethylthio)trifluoromethylation of unactivated alkenes was studied by Liu and co-workers in 2017 (Scheme 23) [44]. The Langlois reagent was combined with N-halophthalimides 42a

Recent advances in transition metal-catalyzed Csp²-monofluoro-, difluoro-, perfluoromethylation and trifluoromethylthiolation

• Grégory Landelle,
• Armen Panossian,
• Sergiy Pazenok,
• Jean-Pierre Vors and
• Frédéric R. Leroux

Beilstein J. Org. Chem. 2013, 9, 2476–2536, doi:10.3762/bjoc.9.287

• important role in pharmaceutical [124] and agrochemical research [16][125]. The trifluoromethylthio group belongs to the most lipophilic substituents as expressed by the Hansch lipophilicity parameter (π = 1.44) [126][127][128][129] and the high electronegativity of the SCF3 group improves significantly the

Direct electrophilic N-trifluoromethylthiolation of amines with trifluoromethanesulfenamide

• Sébastien Alazet,
• Kevin Ollivier and
• Thierry Billard

Beilstein J. Org. Chem. 2013, 9, 2354–2357, doi:10.3762/bjoc.9.270

• bis-amines can also be trifluoromethylthiolated, with the most nucleophile atom as a target (Figure 2). In this case, 2.1 equiv of BuLi are required and reaction times are loner (20 h). This new method was applied to synthesize a trifluoromethylthio analog (3l) of the well-known tricyclic

Aromatic and heterocyclic perfluoroalkyl sulfides. Methods of preparation

• Vladimir N. Boiko

Beilstein J. Org. Chem. 2010, 6, 880–921, doi:10.3762/bjoc.6.88

• ][31][32], the trifluoromethylthio anion [29] or electrophilic perfluoroalkylating agents [33]. Others are devoted to particular methods such as trifluoromethylation initiated by sodium dithionite [34] or the electrochemical introduction of fluoroalkyl groups in organic molecules [35]. Moreover, many

• carrying out the synthesis of aryltrifluoromethyl sulfides by generation CuSCF3 (from trifluoromethylthio mercury and -copper) in situ with the aryl halides. This not only reduces the number of steps but also increases the overall efficiency (Scheme 26). Aryl bromides can also be used but require higher

Shelf-stable electrophilic trifluoromethylating reagents: A brief historical perspective

• Norio Shibata,
• Andrej Matsnev and
• Dominique Cahard

Beilstein J. Org. Chem. 2010, 6, No. 65, doi:10.3762/bjoc.6.65

• , tetraethylthiourea reacted with 27d (X=OTf) to give tetraethylamino(trifluoromethylthio) carbenium triflate. The reaction of 27a (X=OTf) with sodium diethoxyphosphinate and sodium p-chlorophenylsulfinate led to diethyl trifluoromethanephosphonate and p-chlorophenyltrifluoromethylsulfone, respectively (Scheme 24