Applications of organocatalysed visible-light photoredox reactions for medicinal chemistry

• Michael K. Bogdos,
• Emmanuel Pinard and
• John A. Murphy

Beilstein J. Org. Chem. 2018, 14, 2035–2064, doi:10.3762/bjoc.14.179

• compatibility. Hajra et al. have reported the direct C–H thiocyanation of substituted imidazo[1,2-a]pyridines, using ammonium thiocyanate, in combination with Eosin Y under irradiation by blue LEDs (Scheme 9) [52]. This is another photoredox example of C–S bond formation, in this case to a highly versatile

Water-soluble SNS cationic palladium(II) complexes and their Suzuki–Miyaura cross-coupling reactions in aqueous medium

• Alphonse Fiebor,
• Richard Tia,
• Banothile C. E. Makhubela and
• Henok H. Kinfe

Beilstein J. Org. Chem. 2018, 14, 1859–1870, doi:10.3762/bjoc.14.160

• attached to the sulfur atom are pointing away from the plane of the metal centre such that the thioether angles are 100.2(2)° and 102.72(2)° corresponding to C(6)–S(1)–C(9) and C(7)–S(2)–C(13), respectively. The thioether C–S bond lengths obtained are 1.808(4) Å and 1.816(4) Å for S(1)–C(6) and S(2)–C(7

A selective removal of the secondary hydroxy group from ortho-dithioacetal-substituted diarylmethanols

• Anna Czarnecka,
• Emilia Kowalska,
• Agnieszka Bodzioch,
• Joanna Skalik,
• Marek Koprowski,
• Krzysztof Owsianik and
• Piotr Bałczewski

Beilstein J. Org. Chem. 2018, 14, 1229–1237, doi:10.3762/bjoc.14.105

• -coupling reactions of substrates containing an 1,3-dithiane moiety are feasible, like in the case of the 2-arylation of 2-aryl-substituted 1,3-dithianes. However, in the case of 2-benzyl-substituted 1,3-dithianes, a tandem elimination/1,3-dithiane ring opening followed by a Pd-catalyzed C−S bond formation

• are to be expected. This task is additionally difficult to accomplish due to a chemical similarity of oxygen and sulfur, two neighboring heteroatoms from the main group VI of the periodic table. A longer atomic radius of sulfur than oxygen should make the C–S bond weaker and more reactive than the C–O

Stereoselective nucleophilic addition reactions to cyclic N-acyliminium ions using the indirect cation pool method: Elucidation of stereoselectivity by spectroscopic conformational analysis and DFT calculations

• Koichi Mitsudo,
• Junya Yamamoto,
• Tomoya Akagi,
• Atsuhiro Yamashita,
• Masahiro Haisa,
• Kazuki Yoshioka,
• Hiroki Mandai,
• Koji Ueoka,
• Christian Hempel,
• Jun-ichi Yoshida and
• Seiji Suga

Beilstein J. Org. Chem. 2018, 14, 1192–1202, doi:10.3762/bjoc.14.100

• very efficiently yield carbon–carbon bond-formation products. In addition, this research lead to the development of an indirect cation pool method that enables the creation of the cation pool by reacting a cation precursor having a C–S bond with an electrochemically generated ArS(ArSSAr)+ as the cation

The selective electrochemical fluorination of S-alkyl benzothioate and its derivatives

• Shunsuke Kuribayashi,
• Tomoyuki Kurioka,
• Shinsuke Inagi,
• Ho-Jung Lu,
• Biing-Jiun Uang and
• Toshio Fuchigami

Beilstein J. Org. Chem. 2018, 14, 389–396, doi:10.3762/bjoc.14.27

• equiv, the product yield was also increased from 55% to 67% (Table 1, entry 10). However, in this case, C–S bond cleavage also took place to form benzoyl fluoride (3a) as a byproduct in considerable amounts. In all cases, no fluorination at the phenyl group took place. Then, this anodic fluorination was

• (Scheme 2). We next also carried out the anodic fluorination of a cyclic benzothioate namely benzothiophenone 1l. In this case, the fluorination took place predominantly at the benzylic position to afford the fluorinated product 2l in 60% isolated yield (Scheme 3). With this substrate, neither C–S bond

• the other hand, a minor pathway involves a C–S bond cleavage to form benzoyl fluoride as is observed in the case of the anodic oxidation of S-aryl benzothioates [23]. In the case of S-alkyl benzothioates bearing a carboxyl group at the γ and δ-position with respect to the sulfur atom, after generation

Photocatalytic formation of carbon–sulfur bonds

• Alexander Wimmer and
• Burkhard König

Beilstein J. Org. Chem. 2018, 14, 54–83, doi:10.3762/bjoc.14.4

• –S bonds were developed and already excellently reviewed, including nucleophilic substitution reactions between S-nucleophiles and organic electrophiles, metal-catalyzed C–S bond formations and organocatalytic or enzymatic approaches [15][16][18][20][21][22]. This review provides a brief overview

• disulfide, thioamide derivatives and sulfides Disulfides and thiosulfates Sulfoxides Sulfinic acids, sulfinate salts and sulfinamides Sulfonyl halides, sulfonyl hydrazines, thionyl chloride and sulfur dioxide C–S bond formations initiated by irradiation with light of wavelengths shorter than 380 nm or by

• radical initiators as well as photocatalytic reactions, where sulfur-containing substrates act as a sacrificial agent are not discussed in this review [23][24][25][26][27][28]. Review Thiols Formation of sulfides and sulfoxides A large number of photocatalytic C–S bond-forming methods report the

Intramolecular glycosylation

• Xiao G. Jia and
• Alexei V. Demchenko

Beilstein J. Org. Chem. 2017, 13, 2028–2048, doi:10.3762/bjoc.13.201

• would form as the key intermediate. Upon dissociation of the anomeric C–S bond of the sulfonium intermediate 102, an oxygen nucleophile on the boronate ester would attack the C-1 center on the opposite side resulting in 103 with good stereoselection (Scheme 23). Initial trials with 3-methylbenzyl

Transition-metal-free synthesis of 3-sulfenylated chromones via KIO₃-catalyzed radical C(sp²)–H sulfenylation

• Yanhui Guo,
• Shanshan Zhong,
• Li Wei and
• Jie-Ping Wan

Beilstein J. Org. Chem. 2017, 13, 2017–2022, doi:10.3762/bjoc.13.199

• chromones via domino chromone ring construction and C(sp2)–H bond sulfenylation have been achieved under transition-metal-free conditions by using KIO3 as the only catalyst. Keywords: C–H sulfenylation; chromones; domino reaction; free-radical; transition-metal-free; Introduction The C–S bond-forming

Chiral phase-transfer catalysis in the asymmetric α-heterofunctionalization of prochiral nucleophiles

• Johannes Schörgenhumer,
• Maximilian Tiffner and
• Mario Waser

Beilstein J. Org. Chem. 2017, 13, 1753–1769, doi:10.3762/bjoc.13.170

• -ring forming cycloetherifications, which gave a straightforward access to tocopherols with very high selectivities [126]. α-Thioetherifications The catalytic stereoselective C–S bond formation in the α-position of prochiral nucleophiles became the topic of broader interest rather recently [127][128

• ][129][130][131][132][133][134]. Again, different catalytic strategies have been successfully employed to achieve these transformations and asymmetric phase-transfer catalysis is one powerful option to control the configuration of the newly installed C–S bond. The first reports describing the use of

Phenylsilane as an effective desulfinylation reagent

• Wanda H. Midura,
• Aneta Rzewnicka and
• Jerzy A. Krysiak

Beilstein J. Org. Chem. 2017, 13, 1513–1517, doi:10.3762/bjoc.13.150

• sulfide substituents, under these conditions, reduction of the carbonyl group occurred leading to the corresponding alcohols (18 [25], 22) as the only products in high yield. It means that attack on sulfur is not connected with the presence of a C–S bond but a sulfinyl substituent is required. In a former

Transition-metal-catalyzed synthesis of phenols and aryl thiols

• Yajun Liu,
• Shasha Liu and
• Yan Xiao

Beilstein J. Org. Chem. 2017, 13, 589–611, doi:10.3762/bjoc.13.58

• has not been reported. In this review, a brief overview is given of the recent advances in synthetic strategies for both phenols and aryl thiols. Keywords: aryl thiol; C–O bond; C–S bond; phenol; transition metal; Introduction Phenols and aryl thiols serve as both important intermediates in organic

• -catalyzed Ullmann-type coupling reaction has emerged as an effective method, allowing the synthesis of phenols and aryl thiols from aryl halides through C–O and C–S bond formation, respectively [5][6][7]. Very recently, the C–H activation has made revolutionary advances in organic synthesis because it

• converted in situ to aryl thiols through C–S bond cleavage by an intramolecular nucleophilic substitution. The protocol tolerated a broad range of functional groups such as amino, hydroxy, trifluoromethyl, ester, carboxy and formyl groups. As described above, although it seems more difficult to develop an

Dimerization reactions of aryl selenophen-2-yl-substituted thiocarbonyl S-methanides as diradical processes: a computational study

• Michael L. McKee,
• Grzegorz Mlostoń,
• Katarzyna Urbaniak and
• Heinz Heimgartner

Beilstein J. Org. Chem. 2017, 13, 410–416, doi:10.3762/bjoc.13.44

• processes have not been studied in detail yet. Whereas the formation of the 1,3-dithiolane 4 can be explained via a concerted [2 + 3] cycloaddition of 1 as a 1,3-dipole with the activated C=S bond of 1, the dimerization leading to 5 seems to occur stepwise via an intermediate stabilized 1,6-diradical 6. In

A novel method for heterocyclic amide–thioamide transformations

• Walid Fathalla,
• Ibrahim A. I. Ali and
• Pavel Pazdera

Beilstein J. Org. Chem. 2017, 13, 174–181, doi:10.3762/bjoc.13.20

• from I followed by electron delocalization and the overall formation of cyclohexyl isothiocyanate (4) via C–S bond cleavage and the formation of quinazoline thiol anion II having a negative charge concerted on the nitrogen atom. The protonated cyclohexylamine in the previous step will transfer this

Diradical reaction mechanisms in [3 + 2]-cycloadditions of hetaryl thioketones with alkyl- or trimethylsilyl-substituted diazomethanes

• Grzegorz Mlostoń,
• Paulina Pipiak and
• Heinz Heimgartner

Beilstein J. Org. Chem. 2016, 12, 716–724, doi:10.3762/bjoc.12.71

• products of the [3 + 2]-cycloaddition of the diazo dipole onto the C=S bond. The latter decompose only at higher temperature (ca. −40 °C) to generate thiocarbonyl S-isopropanide. In the absence of the starting thioketone, the corresponding thiiranes and/or ethene derivatives, formed from them via

Trifluoromethyl-substituted tetrathiafulvalenes

• Olivier Jeannin,
• Frédéric Barrière and
• Marc Fourmigué

Beilstein J. Org. Chem. 2015, 11, 647–658, doi:10.3762/bjoc.11.73

• EWG-based LUMO, also observed in primary and secondary amides [10]. Another consequence of the contribution of the B form is the shortening of the C–S bond opposite to the EWG, experimentally observed in the structures of such molecules. More recently, we have reported another series of TTFs

• conformation with one fluorine atoms in the TTF mean plane, away from the other substituent. Bond lengths and angles are in the expected range. A dissymmetry of the C–S bonds (b, b′ in Table 4) in the dithiole ring bearing the different EWG is observed, with in both cases a shortening of the C−S bond close to

• shortening affects the C−S bond closest to the CF3 group demonstrates unambiguously that the mesomeric electron-withdrawing effect of the CN or CO2Me groups is indeed stronger than that of CF3. A similar effect is also observed on the structure of the symmetrical TTF 4bc, which was obtained as symmetrical

On the strong difference in reactivity of acyclic and cyclic diazodiketones with thioketones: experimental results and quantum-chemical interpretation

• Andrey S. Mereshchenko,
• Alexey V. Ivanov,
• Viktor I. Baranovskii,
• Grzegorz Mloston,
• Ludmila L. Rodina and
• Valerij A. Nikolaev

Beilstein J. Org. Chem. 2015, 11, 504–513, doi:10.3762/bjoc.11.57

• demonstrated that diazoacetylacetone, even at room temperature, easily reacts with Ph2C=S, giving rise to the formation of 1,3-oxathiole derivatives [14][15], which are considered to be the typical final products of the 1,3-dipolar cycloaddition of diazoketones to the C=S bond [16][17][18]. In this regard, we

• reaction of 1 with the C=S bond of thioketone 2b (step 1) is followed by the decomposition of the intermediate 1,3,4-thiadiazoline 6' (step 2) giving rise to thiocarbonyl ylide 7'. The latter undergoes competitive 1,5- or 1,3-electrocylizations (step 3). Considering that thiadiazolines with bulky

• case of thioketone 2b, all calculations were performed for the gas phase. Reactions with thiobenzophenone (2a) By comparison with the literature data [16][17][18], one can assume that the multistep reactions of DDC 1a–d and thione 2a are initiated by 1,3-cycloaddition of the diazogroup with the C=S

Highly selective electrochemical fluorination of dithioacetal derivatives bearing electron-withdrawing substituents at the position α to the sulfur atom using poly(HF) salts

• Bin Yin,
• Shinsuke Inagi and
• Toshio Fuchigami

Beilstein J. Org. Chem. 2015, 11, 85–91, doi:10.3762/bjoc.11.12

• in the solution, and consequently the C–S bond cleavage seems to take place more favorably than a deprotonation. A similar effect on the suppression of defluorination of CF3-enolate anion in the presence of a large amount of fluoride ions has been reported [38]. On the other hand, it is known that

The Shono-type electroorganic oxidation of unfunctionalised amides. Carbon–carbon bond formation via electrogenerated N-acyliminium ions

• Alan M. Jones and
• Craig E. Banks

Beilstein J. Org. Chem. 2014, 10, 3056–3072, doi:10.3762/bjoc.10.323

• warming breaks the C–S bond and allowed the regeneration of the N-acyliminium ion in a new solution containing the desired nucleophile interceptor to immediately react with the N-acyliminium ion as it is released from its thiomaleimide tag (Figure 3). A micromixer has been used to generate an N

Application of cyclic phosphonamide reagents in the total synthesis of natural products and biologically active molecules

• Thilo Focken and
• Stephen Hanessian

Beilstein J. Org. Chem. 2014, 10, 1848–1877, doi:10.3762/bjoc.10.195

• the adduct as a 3:1 mixture of diastereomers, with 98 as the major isomer. The low diastereoselectivivity observed for the sulfuration as compared to that reported for the alkylation of phosphonamides similar to 97 was explained with a longer C–S bond in the transition state and the steric hindrance

Less reactive dipoles of diazodicarbonyl compounds in reaction with cycloaliphatic thioketones – First evidence for the 1,3-oxathiole–thiocarbonyl ylide interconversion

• Valerij A. Nikolaev,
• Alexey V. Ivanov,
• Ludmila L. Rodina and
• Grzegorz Mlostoń

Beilstein J. Org. Chem. 2013, 9, 2751–2761, doi:10.3762/bjoc.9.309

• spontaneous desulfurization and convert into tetrasubstituted alkenes [20]. 2) Pathway B assumes a stepwise cycloaddition of the diazo-1,3-dipole with the C=S bond leading to the initial formation of the diazonium zwitterion 11. This step is followed either by the ring closure to give thiadiazoline 10 or by

• temperature the formation of 1,3-oxathioles 3,7 occurred not via the initial decomposition of diazo compounds 2 and subsequent generation of thiocarbonyl ylides 6. Instead, the way via the initial [2 + 3]-cycloaddition of the diazo compounds with the C=S bond (Scheme 2) seems to be the most likely process

• . Conclusion We established that acyclic diazodicarbonyl compounds 2a–d react at room temperature with cycloaliphatic thioketones 1a,b via a cascade process, involving either a concerted or a stepwise cycloaddition of the diazo 1,3-dipole to the C=S bond of thioketone, an elimination of the nitrogen from an

Some aspects of radical chemistry in the assembly of complex molecular architectures

• Béatrice Quiclet-Sire and
• Samir Z. Zard

Beilstein J. Org. Chem. 2013, 9, 557–576, doi:10.3762/bjoc.9.61

• is thus made in just one step. In both of these examples, three C–C bonds and one C–S bond are formed one after the other, resulting in a considerable increase in complexity. Interestingly, and not unexpectedly, the two sulfones in structures 21 and 25 have very different reactivities. For instance

Efficient Cu-catalyzed base-free C–S coupling under conventional and microwave heating. A simple access to S-heterocycles and sulfides

• Silvia M. Soria-Castro and
• Alicia B. Peñéñory

Beilstein J. Org. Chem. 2013, 9, 467–475, doi:10.3762/bjoc.9.50

• h at 110 °C, has also been reported [52]. As part of our ongoing study on sulfur chemistry, we are interested in the one-pot synthesis of target heterocycles such as the Beaucage reagent and benzothiazole as well as sulfides by using Cu-catalysis to mediate the C–S bond formation. Herein, we report

• acetylation reaction was also observed with 2-iodophenol. In consequence, protected amino and hydroxy groups were required for the copper-mediated C–S bond formation to proceed properly (Table 3, entries 3, 4 and 9). This copper-catalyzed coupling reaction was also applied to heteroaromatic and other

• , versatile, efficient and economically attractive procedure for the synthesis of sulfur heterocycles and a variety of sulfides with good yields. This one-pot methodology involves a cascade of reactions starting with a C–S bond formation by copper catalysis and followed by consecutive acyl transfers

Tricyclic flavonoids with 1,3-dithiolium substructure

• Lucian G. Bahrin,
• Peter G. Jones and
• Henning Hopf

Beilstein J. Org. Chem. 2012, 8, 1999–2003, doi:10.3762/bjoc.8.226

• charge at the nitrogen atom. Similarly, C3–C4, at 1.342(2) Å, is also a (marginally lengthened) double bond. The C–S bond lengths in the five-membered ring are approximately equal [1.727(1) – 1.746(1) Å]. The new 1,3-dithiolium cations are particularly prone to nucleophilic attack at their 2-positions

A simple and efficient dual optical signaling chemodosimeter for toxic Hg(II)

• Sabir H. Mashraqui,
• Sapna A. Tripathi,
• Sushil S. Ghorpade and
• Smita R. Britto

Beilstein J. Org. Chem. 2012, 8, 1352–1357, doi:10.3762/bjoc.8.155

• Hg2+ with the thione group of acrithion 2, forming an intermediate thioacridinium–Hg+ complex. This phenomena would polarize the C=S bond and therefore facilitate nucleophilic attack by water at the electrophilic C9 position. Subsequently, the hydrolytic desulfurization is expected to form compound 1

Chemo-enzymatic modification of poly-N-acetyllactosamine (LacNAc) oligomers and N,N-diacetyllactosamine (LacDiNAc) based on galactose oxidase treatment

• Christiane E. Kupper,
• Ruben R. Rosencrantz,
• Birgit Henßen,
• Helena Pelantová,
• Stephan Thönes,
• Anna Drozdová,
• Vladimir Křen and
• Lothar Elling

Beilstein J. Org. Chem. 2012, 8, 712–725, doi:10.3762/bjoc.8.80

• experiment (bold printed in tables) and confirmed by the downfield glycosylation shift of the involved carbons (C-4 for Glc, C-3 for Gal). Chemical shifts of GlcNAc carbons C-2 agree with N-acetylation. Because of isomerism on the NH-C=S bond, signals of H-1A and CS were not detected. Chemical shifts of

• spin system –(CH2)4CHCH(N–)CH(N–)CH2– of biotin. The anomeric configuration (β) of all saccharide units was determined from the JH-1,H-2 coupling constants. Chemical shifts of GlcNAc carbons C-2 agree with N-acetylation. Because of isomerism on the NH–C=S bond, protons H-1A resonate as two broad