Mechanisms for radical reactions initiating from N-hydroxyphthalimide esters

• Carlos R. Azpilcueta-Nicolas and
• Jean-Philip Lumb

Beilstein J. Org. Chem. 2024, 20, 346–378, doi:10.3762/bjoc.20.35

Copper-promoted C5-selective bromination of 8-aminoquinoline amides with alkyl bromides

• Changdong Shao,
• Chen Ma,
• Li Li,
• Jingyi Liu,
• Yanan Shen,
• Chen Chen,
• Qionglin Yang,
• Tianyi Xu,
• Zhengsong Hu,
• Yuhe Kan and
• Tingting Zhang

Beilstein J. Org. Chem. 2024, 20, 155–161, doi:10.3762/bjoc.20.14

• selective C5-bromination of 8-aminoquinoline amides using carbon tetrabromide and dibromomethane under photo- and electrocatalysis conditions [27][28]. In 2017, Xia and co-workers reported a novel, mild, metal-free, and regioselective bromination of amides, wherein the organic dye eosin Y acted as the

Recent advancements in iodide/phosphine-mediated photoredox radical reactions

• Tinglan Liu,
• Yu Zhou,
• Junhong Tang and
• Chengming Wang

Beilstein J. Org. Chem. 2023, 19, 1785–1803, doi:10.3762/bjoc.19.131

• hydrogenation or hydrogen transfer [40], electrocatalysis coupled with water oxidation [41], and sustained visible-light-induced photocatalysis [42]. Among the different strategies available, the use of a mild photocatalytic process involving hole-driven hydrogen transfer with hydrogen donors or hole scavengers

Non-noble metal-catalyzed cross-dehydrogenation coupling (CDC) involving ether α-C(sp³)–H to construct C–C bonds

• Hui Yu and
• Feng Xu

Beilstein J. Org. Chem. 2023, 19, 1259–1288, doi:10.3762/bjoc.19.94

•  43e) [127]. At present, only a limited number of reports are available for electrocatalytic CDC reactions involving ether α-C(sp3)–H bonds and their susceptibility to electrocatalytic conditions, which hinders the application of electrocatalysis in this type of coupling reaction [128][129][130

Enabling artificial photosynthesis systems with molecular recycling: A review of photo- and electrochemical methods for regenerating organic sacrificial electron donors

• Grace A. Lowe

Beilstein J. Org. Chem. 2023, 19, 1198–1215, doi:10.3762/bjoc.19.88

• electrolyte salt between the two solutions imposed an electrochemical bias that decreased the rate of chemical recombination between the two phases. Rastgar and Wittstock studied this phenomenon and the mechanistic details of photo- and electrocatalysis at ITIES with modified scanning electrochemical

Transition-metal-catalyzed C–H bond activation as a sustainable strategy for the synthesis of fluorinated molecules: an overview

• Louis Monsigny,
• Floriane Doche and
• Tatiana Besset

Beilstein J. Org. Chem. 2023, 19, 448–473, doi:10.3762/bjoc.19.35

• derivatives. Finally, the use of abundant non-noble transition metals [209][210][211] in such reactions combined or not with modern technologies (photocatalysis and electrocatalysis) is still underexplored and any advances will be of high importance especially from a sustainability point of view aiming at

Earth-abundant 3d transition metals on the rise in catalysis

• Nikolaos Kaplaneris and
• Lutz Ackermann

Beilstein J. Org. Chem. 2022, 18, 86–88, doi:10.3762/bjoc.18.8

• . Applications of this strategy range from late-stage functionalization to modern photocatalysis and electrocatalysis, with contributions from around the globe, including Brazil, China, Japan, Germany, India, and South Korea, among others. The increasing use of C–H activations in academic and industrial

• functionalization enabled the de novo assembly of bioactive molecules [9]. The full potential of the mild nature of C–H functionalization is unlocked by the merger with modern photochemistry and electrocatalysis manifolds. In this context, recent advances were realized by the combination of photoredox catalysis and

Electrocatalytic C(sp³)–H/C(sp)–H cross-coupling in continuous flow through TEMPO/copper relay catalysis

• Bin Guo and
• Hai-Chao Xu

Beilstein J. Org. Chem. 2021, 17, 2650–2656, doi:10.3762/bjoc.17.178

• transition-metal electrocatalysis [33][34][35][36][37][38][39], transition-metal electrocatalysis in continuous flow remains underexplored [40]. With our continued interests in transition-metal electrocatalysis [41][42] and continuous-flow electrosynthesis [43][44][45][46][47][48], we report herein the

• electrochemical microreactors can be a viable tool for developing efficient transition-metal electrocatalysis. C(sp3)–H alkynylation of tetrahydroisoquinolines. L* = chiral ligand. TEMPO = 2,2,6,6-tetramethylpiperidine 1-oxyl. DDQ = 2,3-dichloro-5,6-dicyano-1,4-benzoquinone. BPO = benzoyl peroxide. Substrate

When metal-catalyzed C–H functionalization meets visible-light photocatalysis

• Lucas Guillemard and
• Joanna Wencel-Delord

Beilstein J. Org. Chem. 2020, 16, 1754–1804, doi:10.3762/bjoc.16.147

• electrocatalysis, have been achieved recently [53][54][55][56][57][58]. In addition, various transformations merging photoredox catalysis with transition-metal catalysis have been disclosed [59][60][61][62][63][64][65]. Among these different strategies, visible-light photoredox catalysis combined with nickel

A review of asymmetric synthetic organic electrochemistry and electrocatalysis: concepts, applications, recent developments and future directions

• Munmun Ghosh,
• Valmik S. Shinde and
• Magnus Rueping

Beilstein J. Org. Chem. 2019, 15, 2710–2746, doi:10.3762/bjoc.15.264

• . Parallel electrochemical reaction set-ups will, without doubt, accelerate further developments in the field of asymmetric electrochemistry and electrocatalysis. So far, most of the electrochemical reaction set-ups in this area rely on the use of less favorable electrodes, including Pt, Hg or Pb electrodes

• electrodes for the generation of chiral surfaces has shown some success, it seems that the most promising area in the further development of asymmetric electrochemistry and electrocatalysis will rely on the use of chiral mediators and chiral catalysts. Given the almost unlimited variations in combining

Oxidative radical ring-opening/cyclization of cyclopropane derivatives

• Yu Liu,
• Qiao-Lin Wang,
• Zan Chen,
• Cong-Shan Zhou,
• Bi-Quan Xiong,
• Pan-Liang Zhang,
• Chang-An Yang and
• Quan Zhou

Beilstein J. Org. Chem. 2019, 15, 256–278, doi:10.3762/bjoc.15.23

• strategies, such as photocatalysis or electrocatalysis, can be another orientation for further developments. This review opens the scope for future developments in new methodologies which promise the synthesis of novel fused cyclic systems with a wide range of medicinal and synthetic applications. The

Cobalt–metalloid alloys for electrochemical oxidation of 5-hydroxymethylfurfural as an alternative anode reaction in lieu of oxygen evolution during water splitting

• Jonas Weidner,
• Stefan Barwe,
• Kirill Sliozberg,
• Stefan Piontek,
• Justus Masa,
• Ulf-Peter Apfel and
• Wolfgang Schuhmann

Beilstein J. Org. Chem. 2018, 14, 1436–1445, doi:10.3762/bjoc.14.121

• with the same electrode. Electrolysis of HMF using a CoB modified nickel foam electrode at 1.45 V vs RHE achieved close to 100% selective conversion of HMF to FDCA at 100% faradaic efficiency. Keywords: alternative anode reaction; electrocatalysis; electrosynthesis; HMF oxidation; hydrogen evolution

• Te), could likewise lead to an enhanced electrocatalysis for reactions other than the OER and the HER. To this end, alloys of cobalt with boron, silicon, phosphorus, arsenic and tellurium were screened for their electrocatalytic activity for HMF oxidation. A detailed synthetic procedure to afford

Spectroelectrochemical studies on the effect of cations in the alkaline glycerol oxidation reaction over carbon nanotube-supported Pd nanoparticles

• Dennis Hiltrop,
• Steffen Cychy,
• Karina Elumeeva,
• Wolfgang Schuhmann and
• Martin Muhler

Beilstein J. Org. Chem. 2018, 14, 1428–1435, doi:10.3762/bjoc.14.120

• oxidation. Keywords: cation effect; electrocatalysis; glycerol oxidation; in situ electrochemistry/IR spectroscopy; Introduction The conversion of biomass to biofuels is a promising process for carbon-neutral energy conversion [1]. First-generation biofuels such as bioethanol or biodiesel are produced

Stepwise radical cation Diels–Alder reaction via multiple pathways

• Ryo Shimizu,
• Yohei Okada and
• Kazuhiro Chiba

Beilstein J. Org. Chem. 2018, 14, 704–708, doi:10.3762/bjoc.14.59

• -8588, Japan 10.3762/bjoc.14.59 Abstract Herein we disclose the radical cation Diels–Alder reaction of aryl vinyl ethers by electrocatalysis, which is triggered by an oxidative SET process. The reaction clearly proceeds in a stepwise fashion, which is a rare mechanism in this class. We also found that

• been developing oxidative SET-triggered cycloadditions of enol ethers by electrocatalysis [26][27][28][29][30][31][32] in lithium perchlorate/nitromethane electrolyte solution [33]. The reactions involve a radical cation chain process and are complete using a catalytic amount of electricity. During the

• course of our study, we discovered that radical cation Diels–Alder reactions are also possible by electrocatalysis, however, the scope was limited to styrenes [34]. Described herein is a stepwise radical cation Diels–Alder reaction of enol ethers by electrocatalysis, which proceeds via multiple unique

Fluorescent carbon dots from mono- and polysaccharides: synthesis, properties and applications

• Stephen Hill and
• M. Carmen Galan

Beilstein J. Org. Chem. 2017, 13, 675–693, doi:10.3762/bjoc.13.67

• carbon-based nanomaterials which are typically discrete, quasi-spherical nanoparticles, with sizes usually less than 10 nm in diameter (although bigger sizes have recently been reported). These relatively new nanomaterials have found many applications in the fields of photo- and electrocatalysis

A new approach to ferrocene derived alkenes via copper-catalyzed olefination

• Vasily M. Muzalevskiy,
• Aleksei V. Shastin,
• Alexandra D. Demidovich,
• Namiq G. Shikhaliev,
• Abel M. Magerramov,
• Victor N. Khrustalev,
• Rustem D. Rakhimov,
• Sergey Z. Vatsadze and
• Valentine G. Nenajdenko

Beilstein J. Org. Chem. 2015, 11, 2072–2078, doi:10.3762/bjoc.11.223

• of two redox states. The combination of a ferrocene and an alkene moiety in one molecule might be of interest for the synthesis of functional devises that can be exploited in electrocatalysis, electroanalysis, and biosensing applications, since the alkene fragment could be used to graft the molecule

IR and electrochemical synthesis and characterization of thin films of PEDOT grown on platinum single crystal electrodes in [EMMIM]Tf₂N ionic liquid

• Andrea P. Sandoval,
• Marco F. Suárez-Herrera and
• Juan M. Feliu

Beilstein J. Org. Chem. 2015, 11, 348–357, doi:10.3762/bjoc.11.40

• , resistance, ionic exchange kinetics and electrocatalysis [4]. Besides the synthesis technique, there are two important factors that can influence the polymer properties: the surface structure of the electrode and the solvent used [2][5]. It has been reported that the nucleation and growth kinetics, and the