Aggregation behaviour of a single-chain, phenylene-modified bolalipid and its miscibility with classical phospholipids

• Simon Drescher,
• Vasil M. Garamus,
• Christopher J. Garvey,
• Annette Meister and
• Alfred Blume

Beilstein J. Org. Chem. 2017, 13, 995–1007, doi:10.3762/bjoc.13.99

• -butylammonium fluoride (TBAF) as solvent as well as 1,4-dibromobenzene and octadec-17-yn-1-ol (Ac-C16-OH) [32][39] as starting material. Following, both triple bonds were converted into single bonds by hydrogenation. The bolalipid was finally purified by middle pressure liquid chromatography (MPLC) using CHCl3

Automating multistep flow synthesis: approach and challenges in integrating chemistry, machines and logic

• Chinmay A. Shukla and
• Amol A. Kulkarni

Beilstein J. Org. Chem. 2017, 13, 960–987, doi:10.3762/bjoc.13.97

• intermediate can be reacted with H2 in a commercial reactor with an integrated control system. After hydrogenation, the solvent switch can be carried out in an evaporator by removing the THF solvent and then re-dissolving the intermediate in DCM as solvent. The outlet flow rate of the evaporator can be

Total synthesis of TMG-chitotriomycin based on an automated electrochemical assembly of a disaccharide building block

• Yuta Isoda,
• Norihiko Sasaki,
• Kei Kitamura,
• Shuji Takahashi,
• Sujit Manmode,
• Naoko Takeda-Okuda,
• Jun-ichi Tamura,
• Toshiki Nokami and
• Toshiyuki Itoh

Beilstein J. Org. Chem. 2017, 13, 919–924, doi:10.3762/bjoc.13.93

• -diisopropylethylamine (iPr2NEt) to prepare the TMG part of tetrasaccharide 9. Deprotection of acetyl groups at the 3-O-positions and the subsequent global deprotection of the benzyl groups and the anomeric thioaryl group of the tetrasaccharide by hydrogenation with hydrogen gas in the presence of a palladium catalyst

Continuous-flow processes for the catalytic partial hydrogenation reaction of alkynes

• Carmen Moreno-Marrodan,
• Francesca Liguori and
• Pierluigi Barbaro

Beilstein J. Org. Chem. 2017, 13, 734–754, doi:10.3762/bjoc.13.73

• Carmen Moreno-Marrodan Francesca Liguori Pierluigi Barbaro Consiglio Nazionale delle Ricerche, Istituto di Chimica dei Composti Organo Metallici, Via Madonna del Piano 10, 50019 Sesto Fiorentino, Firenze, Italy 10.3762/bjoc.13.73 Abstract The catalytic partial hydrogenation of substituted alkynes

• to August 2016 are discussed in terms of reactor design. A comparison with batch and industrial processes is provided whenever possible. Keywords: alkynes; heterogeneous catalysis: hydrogenation; flow; liquid-phase; Introduction The catalytic partial hydrogenation of alkynes to alkenes in the

• hydrogenation reaction of alkynes is thus of utmost importance [14][15]. Compared to batch setups, considerable process intensification [16][17] to this regard can be provided by continuous-flow operations either in terms of safety, purification, waste emission, durability, reproducibility, automation, energy

Fluorinated cyclohexanes: Synthesis of amine building blocks of the all-cis 2,3,5,6-tetrafluorocyclohexylamine motif

• Tetiana Bykova,
• Nawaf Al-Maharik,
• Alexandra M. Z. Slawin and
• David O'Hagan

Beilstein J. Org. Chem. 2017, 13, 728–733, doi:10.3762/bjoc.13.72

• moieties were then converted to different stereoisomers of the tetrafluorocyclohexyl ring system, and then reductive hydrogenation of the nitrile delivered three amine stereoisomers. It proved necessary to place a methyl group on the cyclohexane ring in order to stabilise the compound against subsequent HF

• pressure. Hydrogenation of 11a over 10% Pd/C in ethyl acetate gave the desired amine 5a but in very low yield (0–15%) [18][19][20]. The structure of 5a was confirmed by X-ray crystallography (Scheme 2). Adding a few drops of formic acid and triethylamine (molar ratio 37:1) to the hydrogenation, furnished

Exploring endoperoxides as a new entry for the synthesis of branched azasugars

• Svenja Domeyer,
• Mark Bjerregaard,
• Henrik Johansson and
• Daniel Sejer Pedersen

Beilstein J. Org. Chem. 2017, 13, 644–647, doi:10.3762/bjoc.13.63

• by-product. Likely, diol 26 is formed by ring-opening of the epoxide by water present in the mCPBA and the reaction could be optimised by performing the reaction under anhydrous conditions. Attempts at cleaving the endoperoxide bond of 20 and 21 by catalytic hydrogenation resulted in rapid

Derivatives of the triaminoguanidinium ion, 5. Acylation of triaminoguanidines leading to symmetrical tris(acylamino)guanidines and mesoionic 1,2,4-triazolium-3-aminides

• Jan Szabo,
• Julian Greiner and
• Gerhard Maas

Beilstein J. Org. Chem. 2017, 13, 579–588, doi:10.3762/bjoc.13.57

• hydrogenation of an N-benzyl derivative. Crystal structure analyses of a 4-benzylamino-1,2,4-triazolium-3-hydrazinide and of two derived 1,2,4-triazolium salts are presented. Keywords: guanidines; mesoionic compounds; triaminoguanidinium salts; 1,2,4-triazolium-3-aminides; Introduction Easily accessible by

• mentioned above, a two-step protocol – conversion of 1 into N,N’,N’’-tris(benzylideneamino)guanidinium chloride followed by catalytic hydrogenation of the imine groups – was developed. The fluorophenyl-substituted salt 5 was prepared analogously. Depending on the reaction conditions, the guanidinium salts 4

• were confirmed by single-crystal X-ray diffraction (vide infra). Catalytic hydrogenation of 1,2,4-triazolium-3-aminides 7 with H2 and Pd/C in methanol selectively cleaves the N1–Cbenzyl bond and yields the neutral N-benzyl-N’-(4-benzylamino-4H-1,2,4-triazol-3-yl)benzohydrazides 10 in high yields

Studies directed toward the exploitation of vicinal diols in the synthesis of (+)-nebivolol intermediates

• Runjun Devi and
• Sajal Kumar Das

Beilstein J. Org. Chem. 2017, 13, 571–578, doi:10.3762/bjoc.13.56

• . However, it has been reviewed that not only benzylic epoxides but also non-benzylic epoxides are sensitive to the standard hydrogenation/debenzylation conditions [35]. Whereas benzylic epoxides are highly sensitive to hydrogenation conditions, non-benzylic epoxides, depending on the reaction conditions

Contribution of microreactor technology and flow chemistry to the development of green and sustainable synthesis

• Flavio Fanelli,
• Giovanna Parisi,
• Leonardo Degennaro and
• Renzo Luisi

Beilstein J. Org. Chem. 2017, 13, 520–542, doi:10.3762/bjoc.13.51

• process. The stereochemistry of the adduct can be simply switched to the opposite enantiomer, by using the enantiomeric supported catalyst PS–(R)-pybox–calcium chloride. The enantiomeric excess of the products was about 96%. Two more steps consisting in a Pd-catalyzed hydrogenation reaction and a

Synthesis of 1-indanones with a broad range of biological activity

• Marika Turek,
• Dorota Szczęsna,
• Marek Koprowski and
• Piotr Bałczewski

Beilstein J. Org. Chem. 2017, 13, 451–494, doi:10.3762/bjoc.13.48

• have applied a Heck-reduction–cyclization–alkylation (HRCA) methodology under mild and simple reaction conditions. First, diazonium salts 56 underwent the Heck reaction with methyl vinyl ketone (57) to give the cross-coupling products 58 followed by hydrogenation of the latter to give aromatic

Continuous N-alkylation reactions of amino alcohols using γ-Al₂O₃ and supercritical CO₂: unexpected formation of cyclic ureas and urethanes by reaction with CO₂

• Emilia S. Streng,
• Darren S. Lee,
• Michael W. George and
• Martyn Poliakoff

Beilstein J. Org. Chem. 2017, 13, 329–337, doi:10.3762/bjoc.13.36

• ., boron salts from reductive amination [4]. Hydrogenation offers a greener approach but is often only applicable to simple substrates due to chemoselectivity issues. An approach that has received much attention recently is the concept of hydrogen borrowing catalysis [5][6][7][8][9][10][11][12][13][14][15

NMR reaction monitoring in flow synthesis

• M. Victoria Gomez and
• Antonio de la Hoz

Beilstein J. Org. Chem. 2017, 13, 285–300, doi:10.3762/bjoc.13.31

• concentrations of 1 mmol L−1 in single-scan experiments. As a proof-of-concept, they studied the transfer hydrogenation process of acetophenone with isopropanol catalysed by iridium complexes. The reaction was performed in batch and the sample was introduced into the magnet with a pump and Teflon tubing to form

The reductive decyanation reaction: an overview and recent developments

• Jean-Marc R. Mattalia

Beilstein J. Org. Chem. 2017, 13, 267–284, doi:10.3762/bjoc.13.30

• charge on the carbon adjacent to the cyano group [76][77]. Transition-metal-catalyzed reductive decyanation Hydrogenation of α-aminonitriles The decyanation of α-aminonitriles with hydrogen present in an excess of Raney nickel was described by Husson and co-workers on oxazolidine derivatives [83][84

• ]. The authors logically proposed that the decyanation occurred via the reduction of an iminium ion intermediate. The hydrogenation of α-aminonitriles catalyzed by nickel nanoparticles results in reductive decyanation and yields 29–31. The colloid solution of nickel is prepared in situ via reduction of

• ]. Opatz et al. developed the enantioselective syntheses of various alkaloids using the rhodium catalyst developed by Noyori [88] for the asymmetric transfer hydrogenation of imines. Interestingly, imines are formed from unstable α-aminonitrile intermediates which spontaneously eliminate HCN [89][90][91

Revaluation of biomass-derived furfuryl alcohol derivatives for the synthesis of carbocyclic nucleoside phosphonate analogues

• Bemba Sidi Mohamed,
• Christian Périgaud and
• Christophe Mathé

Beilstein J. Org. Chem. 2017, 13, 251–256, doi:10.3762/bjoc.13.28

• catalytic hydrogenation of furfural; the latter is obtained from the dehydration of xylose, a 5-carbon sugar derived from vegetal biomass. Furfuryl alcohol finds widespread application in the chemical industries and for example is employed for the production of synthetic fibers, fine chemicals, etc. In fine

Diastereoselective anodic hetero- and homo-coupling of menthol-, 8-methylmenthol- and 8-phenylmenthol-2-alkylmalonates

• Matthias C. Letzel,
• Hans J. Schäfer and
• Roland Fröhlich

Beilstein J. Org. Chem. 2017, 13, 33–42, doi:10.3762/bjoc.13.5

• with a benzylmalonyl chloride prepared from 5 and 6 and the benzyl group is subsequently removed by hydrogenation to afford the free carboxylic acids 13a/b–18a/b for the electrolyses. Benzyl 2-isopropylmalonate (5) was prepared in high yield, using a method of Strating et al. [17], by deprotonation of

• for the hydrogenation of the benzyl esters: To a solution of 6.4 mmol benzyl ester in 100 mL of methanol 800 mg of the palladium catalyst (10% Pd on carbon) were added. Hydrogenation was performed at atmospheric pressure until no further hydrogen was consumed. After filtration through celite the

First DMAP-mediated direct conversion of Morita–Baylis–Hillman alcohols into γ-ketoallylphosphonates: Synthesis of γ-aminoallylphosphonates

• Marwa Ayadi,
• Haitham Elleuch,
• Emmanuel Vrancken and
• Farhat Rezgui

Beilstein J. Org. Chem. 2016, 12, 2906–2915, doi:10.3762/bjoc.12.290

• has been reported through a palladium-catalyzed hydrogenation of α-fluorovinylphosphonates [43]. In continuation of our interest [21] in the construction of carbon–phosphorus bonds using both cyclic and acyclic MBH adducts, we report herein, for the first time, a direct and facile access to γ

Iodination of carbohydrate-derived 1,2-oxazines to enantiopure 5-iodo-3,6-dihydro-2H-1,2-oxazines and subsequent palladium-catalyzed cross-coupling reactions

• Michal Medvecký,
• Igor Linder,
• Luise Schefzig,
• Hans-Ulrich Reissig and
• Reinhold Zimmer

Beilstein J. Org. Chem. 2016, 12, 2898–2905, doi:10.3762/bjoc.12.289

• . This was exemplarily demonstrated by the hydrogenation of syn-21 and anti-24 and by a click reaction of a 5-alkynyl-substituted precursor. Keywords: amino alcohol; click reaction; cross-coupling reactions; hydrogenation; iodination; 1,2-oxazines; Introduction Over the last decade, we have intensively

• . Cross-coupling reaction of 1,2-oxazine anti-4d leading to 5-cyano-substituted 1,2-oxazine anti-25. Desilylation of 1,2-oxazine syn-5 and subsequent click reaction with benzyl azide leading to 5-(1,2,3-triazolyl)-substituted 1,2-oxazine syn-26. Hydrogenation of 1,2-oxazine syn-21 leading to γ-amino

• alcohols 27a,b and subsequent ring closure to pyrrolidine derivatives 28a,b. Hydrogenation of 1,2-oxazine anti-24 to products anti-29 and anti-30. Supporting Information Supporting Information File 399: General information, all experimental procedures and analytical data. Supporting Information File 400

New approaches to organocatalysis based on C–H and C–X bonding for electrophilic substrate activation

• Pavel Nagorny and
• Zhankui Sun

Beilstein J. Org. Chem. 2016, 12, 2834–2848, doi:10.3762/bjoc.12.283

• as potential catalysts, and chiral catalyst L25 was identified as the catalyst of choice. Although no chirality transfer was observed during the reduction of 2-phenylquinoline, L25 was found to be a very active catalyst promoting transfer hydrogenation of a C=N group containing heterocycles and

• bond to carbonyl [80]. Transfer hydrogenation of phenylquinolines catalyzed by haloperfluoroalkanes by Bolm and co-workers [81]. Halogen bond activation of benzhydryl bromides by Huber and co-workers [82]. Halogen bond-donor-catalyzed addition to oxocarbenium ions by Huber and co-workers [89]. Halogen

• bond-donor activation of α,β-unsaturated carbonyl compounds in the [2 + 4] cycloaddition reaction of MVK and cyclopentadiene [88]. Halogen bond donor activation of imines in the [2 + 4] cycloaddition reaction of imine and Danishefsky’s diene [90]. Transfer hydrogenation catalyzed by a chiral halogen

Chemical probes for competitive profiling of the quorum sensing signal synthase PqsD of Pseudomonas aeruginosa

• Michaela Prothiwa,
• Dávid Szamosvári,
• Sandra Glasmacher and
• Thomas Böttcher

Beilstein J. Org. Chem. 2016, 12, 2784–2792, doi:10.3762/bjoc.12.277

• be difficult especially for multigram scale approaches. Since 1-O-HHQ (4) was now easily available, we used 4 as starting point for the 1-O-PQS (13) synthesis by two different approaches. First, we tried to synthesize chroman-4-one 8 by hydrogenation of 4. We found that ammonium formate (NH4HCO2) as

A versatile route to polythiophenes with functional pendant groups using alkyne chemistry

• Xiao Huang,
• Li Yang,
• Rikard Emanuelsson,
• Jonas Bergquist,
• Maria Strømme,
• Martin Sjödin and
• Adolf Gogoll

Beilstein J. Org. Chem. 2016, 12, 2682–2688, doi:10.3762/bjoc.12.265

• economically available D-mannitol diketal, 1,2:5,6-bis-O-(1-methylethylidene)-D-mannitol which can be obtained via the hydrogenation of common table sugar [32]. Oxidation of this diketal by NaIO4 led to glyceraldehyde [33], which was transformed into the dibromoolefin 5 by Corey–Fuchs reaction. Dibromoolefin 5

Continuous-flow synthesis of primary amines: Metal-free reduction of aliphatic and aromatic nitro derivatives with trichlorosilane

• Riccardo Porta,
• Alessandra Puglisi,
• Giacomo Colombo,
• Sergio Rossi and
• Maurizio Benaglia

Beilstein J. Org. Chem. 2016, 12, 2614–2619, doi:10.3762/bjoc.12.257

• conditions. Typically, the transformation of nitro compounds to amines under continuous-flow conditions is performed through the metal-catalyzed hydrogenation [21][22][23] with ThalesNano H-Cube®, which exploits H2 generated in situ by water electrolysis [24]. The procedure involves relatively mild reaction

New syntheses of (±)-tashiromine and (±)-epitashiromine via enaminone intermediates

• Darren L. Riley,
• Joseph P. Michael and
• Charles B. de Koning

Beilstein J. Org. Chem. 2016, 12, 2609–2613, doi:10.3762/bjoc.12.256

• recrystallisation from hexane. The cyclised enaminones 9b–d underwent catalytic hydrogenation in the presence of Adams catalyst (PtO2·xH2O) under mildly acidic conditions. The reduction can proceed either by direct cis-hydrogenation of the C=C bond, or by hydrogenation of the bicyclic iminium system formed by C

• nitrile experiencing reproducibility issues during the cyclisation step. Key to the success of the synthesis however is the ability to remove efficiently the triphenylphosphine residues after the cyclisation step as the catalytic hydrogenation appeared to be adversely effected by the presence of these

Facile synthesis of a 3-deazaadenosine phosphoramidite for RNA solid-phase synthesis

• Elisabeth Mairhofer,
• Elisabeth Fuchs and
• Ronald Micura

Beilstein J. Org. Chem. 2016, 12, 2556–2562, doi:10.3762/bjoc.12.250

• ). Then, glycosylation with 1-O-acetyl-2,3,5-tri-O-benzoyl-ß-D-ribofuranose gave the desired nucleoside 2 in high yield. Unfortunately, all our attempts to find appropriate conditions to reduce the 6-azido group to the corresponding amine failed. In short, these trials included i) hydrogenation under Pd/C

A new paradigm for designing ring construction strategies for green organic synthesis: implications for the discovery of multicomponent reactions to build molecules containing a single ring

• John Andraos

Beilstein J. Org. Chem. 2016, 12, 2420–2442, doi:10.3762/bjoc.12.236

• containing one asymmetric feature, namely the electrophilic carbonyl group. This molecule is made industrially from precursors that already have the 6-membered ring preformed [132]. Example routes include dehydrogenation of cyclohexanol, which in turn is made either by catalytic hydrogenation of phenol

• cyclohexenone, followed by hydrogenation is 100% atom economical yielding no byproducts. The next best route with an 86% atom economy is the Diels–Alder addition of ketene, generated by pyrolysis of acetone, to 1,3-butadiene to give cyclohex-3-enone, which upon hydrogenation yields cyclohexanone. The only

Enduracididine, a rare amino acid component of peptide antibiotics: Natural products and synthesis

• Darcy J. Atkinson,
• Briar J. Naysmith,
• Daniel P. Furkert and
• Margaret A. Brimble

Beilstein J. Org. Chem. 2016, 12, 2325–2342, doi:10.3762/bjoc.12.226

• afforded macrocycle 117 in 30–35% yield. Unfortunately efforts to remove both the Cbz and CO2H moieties of 117 to afford macrocycle 109 under hydrogenation conditions were unsuccessful. Conclusion The recent interest in teixobactin has resulted from its clinically unexploited mode of action, potent