A three-armed cryptand with triazine and pyridine units: synthesis, structure and complexation with polycyclic aromatic compounds

• Claudia Lar,
• Adrian Woiczechowski-Pop,
• Attila Bende,
• Ioana Georgeta Grosu,
• Natalia Miklášová,
• Elena Bogdan,
• Niculina Daniela Hădade,
• Anamaria Terec and
• Ion Grosu

Beilstein J. Org. Chem. 2018, 14, 1370–1377, doi:10.3762/bjoc.14.115

• complexes with various aromatic guests. Results and Discussion Cryptand 2 is accessible via nucleophilic aromatic substitution in good yields (42%, Scheme 1) by treating triphenol 3 [36] with the reactive and commercially available 2,6-dichloro-3,5-dicyanopyridine following a procedure previously elaborated

• F254 TLC plates. Solvents were dried and distilled under argon using standard procedures. Procedure for the synthesis of 2 (analogous to the method described for 1 in [32]): Triphenol 3 (0.10 g, 0.28 mmol), 2,6-dichloro-3,5-dicyanopyridine (0.083 g, 0.42 mmol) and anhydrous NEt3 (0.12 mL, 0.84 mmol

One hundred years of benzotropone chemistry

• Arif Dastan,
• Haydar Kilic and
• Nurullah Saracoglu

Beilstein J. Org. Chem. 2018, 14, 1120–1180, doi:10.3762/bjoc.14.98

• of benzo[7]annulenylium cations 133a and 133b (Scheme 23) [49]. While the reaction of 11 with oxalyl bromide yielded bromobenzo[7]annulenenylium bromide 134a as a stable carbenium salt, the reaction of oxalyl chloride or phosgene with 11 afforded 7,7-dichloro-7H-benzo[7]annulene (135b) as a covalent

• attributed to the highest positive charge density at the benzylic position, which is the favored process under kinetic conditions. During the attempted preparation of 4,5-benzotropone diaziridine 144, the synthesis of 7,7-dichloro-7H-benzo[7]annulene (135b) was also carried out from the reaction of 4,5

Selective carboxylation of reactive benzylic C–H bonds by a hypervalent iodine(III)/inorganic bromide oxidation system

• Toshifumi Dohi,
• Shohei Ueda,
• Kosuke Iwasaki,
• Yusuke Tsunoda,
• Koji Morimoto and
• Yasuyuki Kita

Beilstein J. Org. Chem. 2018, 14, 1087–1094, doi:10.3762/bjoc.14.94

• benzylmethyl groups, and the use of 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) [58] or catalytic tetrabutylammonium iodide with tert-butyl hydrogen peroxide for reactions with a large excess of aromatic hydrocarbons [59]. Other than these excellent examples of metal-free methods, two protocols using a

Volatiles from the xylarialean fungus Hypoxylon invadens

• Jeroen S. Dickschat,
• Tao Wang and
• Marc Stadler

Beilstein J. Org. Chem. 2018, 14, 734–746, doi:10.3762/bjoc.14.62

• α-cadinene (5). The same problem applies to the unambiguous identification of regioisomers of aromatic compounds. We have recently reported on the GC–MS-based identification of the fungal volatiles 1-chloro-3,4-dimethoxybenzene (6) and 1,3-dichloro-4,5-dimethoxybenzene (7) from an endophytic

• chlorinated aromatic compounds 1-chloro-3,4-dimethoxybenzene (6) and 1,3-dichloro-4,5-dimethoxybenzene (7) from Geniculosporium. Total-ion chromatogram of the bouquet from Hypoxylon invadens MUCL 54175 obtained by the CLSA headspace technique. Numbers at peaks correspond to the compounds in Table 1 and Figure

Enhanced quantum yields by sterically demanding aryl-substituted β-diketonate ancillary ligands

• Rebecca Pittkowski and
• Thomas Strassner

Beilstein J. Org. Chem. 2018, 14, 664–671, doi:10.3762/bjoc.14.54

• the platinum complexes were performed under an argon atmosphere and by exclusion of light, using flame-dried Schlenk tubes. Solvents of at least 99.0% purity were used. DMF was dried according to standard methods and stored over molecular sieve (3 Å) under argon atmosphere. Dichloro(1,5-cyclooctadiene

• temperature, then for 23 hours at 50 °C. Dichloro(1,5-cyclooctadiene)platinum(II) (300 mg, 0.8 mmol) was added at room temperature, and the mixture was stirred for two hours at 50 °C, then for 24 hours at 120 °C. Afterwards, potassium tert-butanolate (180 mg, 1.6 mmol) and 1,3-bis(2,4,6-trimethylphenyl

• ,κC2‘][bis(2,3,5,6-tetramethylphenyl) propane-1,3-dionato-κO,κO‘]platinum(II) (3) The product was obtained following the general procedure reported for 2 using 1-methyl-3-phenyl-1H-imidazol-3-ium iodide (1, 230 mg, 0.8 mmol) and silver(I) oxide (100 mg, 0.4 mmol), dichloro(1,5-cyclooctadiene)platinum

Syn-selective silicon Mukaiyama-type aldol reactions of (pentafluoro-λ⁶-sulfanyl)acetic acid esters with aldehydes

• Anna-Lena Dreier,
• Andrej V. Matsnev,
• Joseph S. Thrasher and
• Günter Haufe

Beilstein J. Org. Chem. 2018, 14, 373–380, doi:10.3762/bjoc.14.25

• , entry 13), while 2-bromo-, 2,6-dichloro- and 2,4-dinitrobenzaldehydes failed to give any aldol products (Table 2, entries 14–16). Besides the starting materials, only minor amounts of SF5-containing side products of unknown structure were detected in the 19F NMR spectra of the crude product mixtures

5-Aminopyrazole as precursor in design and synthesis of fused pyrazoloazines

• Ranjana Aggarwal and
• Suresh Kumar

Beilstein J. Org. Chem. 2018, 14, 203–242, doi:10.3762/bjoc.14.15

• their aromatic counterparts 72 in presence of 2,3-dichloro-5,6-dicyanobenzoquinone (DDQ) in acetonitrile. Insuasty et al. [64] adapted a similar synthetic strategy for the construction of 4,7-dihydropyrazolo[3,4-b]pyridines 73 and pyrazolo[3,4-b]pyridines 74 by a three-component reaction of 5

Volatiles from the tropical ascomycete Daldinia clavata (Hypoxylaceae, Xylariales)

• Tao Wang,
• Kathrin I. Mohr,
• Marc Stadler and
• Jeroen S. Dickschat

Beilstein J. Org. Chem. 2018, 14, 135–147, doi:10.3762/bjoc.14.9

• clavata remains unknown. The headspace extracts from D. clavata also contained two chlorinated compounds as indicated by the isotope pattern of the molecular ions in the respective EI mass spectra. The first of these compounds was readily identified as 1,3-dichloro-2,4-dimethoxybenzene (14) by comparison

• to an authentic standard and to synthetic standards of all possible positional isomers. These isomers have been made accessible during our previous work that resulted in the identification of 1,5-dichloro-2,3-dimethoxybenzene as a headspace constituent of an endophytic Geniculosporium sp. [35]. The

Halogen-containing thiazole orange analogues – new fluorogenic DNA stains

• Aleksey A. Vasilev,
• Meglena I. Kandinska,
• Stanimir S. Stoyanov,
• Stanislava B. Yordanova,
• David Sucunza,
• Juan J. Vaquero,
• Obis D. Castaño,
• Stanislav Baluschev and
• Silvia E. Angelova

Beilstein J. Org. Chem. 2017, 13, 2902–2914, doi:10.3762/bjoc.13.283

• -Chloro-1-methyl-4-((3-methylbenzo[d]thiazol-2(3H)-ylidene)methyl)quinolin-1-ium iodide (TO-7Cl) Procedures A1 and A2: 2,3-Dimethylbenzo[d]thiazolium methyl sulfate (2a, 1 mmol) and the appropriate 4,7-dichloro-1-methylquinolinium methyl sulfate (4a, 1 mmol) were finely ground together in a mortar and the

CF₃SO₂X (X = Na, Cl) as reagents for trifluoromethylation, trifluoromethylsulfenyl-, -sulfinyl- and -sulfonylation. Part 1: Use of CF₃SO₂Na

• Hélène Guyon,
• Hélène Chachignon and
• Dominique Cahard

Beilstein J. Org. Chem. 2017, 13, 2764–2799, doi:10.3762/bjoc.13.272

• -workers reported the synthesis of trifluoromethylated coumarin 71 and flavone 72 with CF3SO2Na (2 equiv), the hypervalent iodine F5-PIFA (pentafluorophenyliodine bis(trifluoroacetate)) (2 equiv) and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ, 0.6 equiv). The trifluoromethylated compounds were obtained

• the direct trifluoromethylation of a wide variety of arenes and heteroarenes under visible-light irradiation [73]. The substrate scope was evaluated on 30 arenes and heteroarenes using 2,3-dichloro-5,6-dicyanobenzoquinone (DDQ) as photocatalyst and CF3SO2Na as the CF3 radical source. The reaction

Preparation and isolation of isobenzofuran

• Morten K. Peters and
• Rainer Herges

Beilstein J. Org. Chem. 2017, 13, 2659–2662, doi:10.3762/bjoc.13.263

• ) and methylated to DMIBF (7) [8]. However, yields in our hands are quite low. It is known that benzyl ethers are prone to oxidative functionalization [20]. 2,3-Dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) has been used to selectively oxidize benzyl ethers to acetals in the presence of alcohols [21

• -Dichloro-5,6-dicyano-1,4-benzoquinone (DDQ, 5.00 g, 22.0 mmol), dry dichloromethane (100 mL), methanol (900 μL, 22.2 mmol) and phthalan (8, 2.00 g, 16.7 mmol) were dissolved under a nitrogen atmosphere. The reaction mixture was stirred for 13 h at room temperature. The reaction was quenched with aq sodium

One-pot syntheses of blue-luminescent 4-aryl-1H-benzo[f]isoindole-1,3(2H)-diones by T3P^® activation of 3-arylpropiolic acids

• Melanie Denißen,
• Alexander Kraus,
• Guido J. Reiss and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2017, 13, 2340–2351, doi:10.3762/bjoc.13.231

• use of phenylpropiolic acid chloride and phenylpropiolic acid as starting materials [45], and as well oxidative arene–alkyne cyclization with dichloro-5,6-dicyano-benzoquinone (DDQ) [46]. Based upon our experience in using propylphosphonic acid anhydride (T3P®) [47] as a condensation agent for in situ

Synthesis of 2-aminosuberic acid derivatives as components of some histone deacetylase inhibiting cyclic tetrapeptides

• Shital Kumar Chattopadhyay,
• Suman Sil and
• Jyoti Prasad Mukherjee

Beilstein J. Org. Chem. 2017, 13, 2153–2156, doi:10.3762/bjoc.13.214

• -trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(trichlorohexylphosphine)ruthenium, 12] in refluxing dichloromethane and the product 14a was obtained in good yield. The corresponding reaction of 11 with benzyl acrylate (13b) proceeded with similar facility, yield and isomeric composition. Although

Mechanochemical synthesis of small organic molecules

• Tapas Kumar Achar,
• Anima Bose and
• Prasenjit Mal

Beilstein J. Org. Chem. 2017, 13, 1907–1931, doi:10.3762/bjoc.13.186

•  11) using 2,3-dichloro-5,6-dicyanoquinone (DDQ) as an efficient oxidant [67]. Su and co-workers have also reported an asymmetric version of the CDC reaction between terminal alkynes and sp3 C–H bonds under high speed ball milling conditions [68]. Several optically active 1-alkynyl

• tetrahydroisoquinoline derivatives were synthesized using a pyridine-based chiral ligand (PyBox, Scheme 12) in the presence of DDQ (2,3-dichloro-5,6-dicyano-1,4-benzoquinone). The coupling products were isolated in fair yields with ee’s (enantiomeric excesses) up to 79%. The milling copper balls were also identified as

Synthesis of benzothiophene and indole derivatives through metal-free propargyl–allene rearrangement and allyl migration

• Jinzhong Yao,
• Yajie Xie,
• Lianpeng Zhang,
• Yujin Li and
• Hongwei Zhou

Beilstein J. Org. Chem. 2017, 13, 1866–1870, doi:10.3762/bjoc.13.181

• products in good yields (2a–k). A variety of substituents, such as p-COOEt, p-COCH3, dichloro, p-NO2, p-CF3 and p-CN were well-tolerated during the reaction, leading to 2a–f in 54–83% yield. The presence of methyl acrylate or pyridine was also well-tolerated, as exemplified in the formation of 2g,h in 48

Oxidative dehydrogenation of C–C and C–N bonds: A convenient approach to access diverse (dihydro)heteroaromatic compounds

• Santanu Hati,
• Ulrike Holzgrabe and
• Subhabrata Sen

Beilstein J. Org. Chem. 2017, 13, 1670–1692, doi:10.3762/bjoc.13.162

• -dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), KMnO4, transition metal-based oxidants and air have been extensively used to promote this transformation. o-Iodoxybenzoic acid (IBX)-mediated oxidative dehydrogenation IBX was first introduced as an oxidant (in oxidative dehydrogenation) by Nicolaou and co

Synthesis of ribavirin 2’-Me-C-nucleoside analogues

• Fanny Cosson,
• Aline Faroux,
• Jean-Pierre Baltaze,
• Jonathan Farjon,
• Régis Guillot,
• Jacques Uziel and
• Nadège Lubin-Germain

Beilstein J. Org. Chem. 2017, 13, 755–761, doi:10.3762/bjoc.13.74

• -dichloro-1,1,3,3-tetraisopropyldisiloxane (TIPDSCl2). While this reaction proceeded with a very poor yield in the case of the mixture 10a/10b (~10% yield), compound 11a was obtained in 79% yield from pure 10a (24% yield for 11b starting from 10b). Thereafter, the oxidation of 11a to the corresponding

Pd- and Cu-catalyzed approaches in the syntheses of new cholane aminoanthraquinone pincer-like ligands

• Nikolay V. Lukashev,
• Gennadii A. Grabovyi,
• Dmitry A. Erzunov,
• Alexey V. Kazantsev,
• Gennadij V. Latyshev,
• Alexei D. Averin and
• Irina P. Beletskaya.

Beilstein J. Org. Chem. 2017, 13, 564–570, doi:10.3762/bjoc.13.55

• ). Consequently, this system was used for the synthesis of bis-steroidal arylamines 5a and 5b starting from 24-aminocholanol 3a. Activated chlorinated substrates, such as 1,8- and 1,5-dichloroanthraquinones, are very promising substrates for nucleophilic substitution. For instance, 1,8-dichloro-9,10-anthraquinone

Synthesis of 1-indanones with a broad range of biological activity

• Marika Turek,
• Dorota Szczęsna,
• Marek Koprowski and
• Piotr Bałczewski

Beilstein J. Org. Chem. 2017, 13, 451–494, doi:10.3762/bjoc.13.48

New approaches to organocatalysis based on C–H and C–X bonding for electrophilic substrate activation

• Pavel Nagorny and
• Zhankui Sun

Beilstein J. Org. Chem. 2016, 12, 2834–2848, doi:10.3762/bjoc.12.283

• –4 M−1) between L14 or L15 and lactide in solution. The α-dichloro and α-dibromoacetanilides L14 containing electron-deficient aromatic groups (i.e., m,m’-NO2 substitution on phenyl ring) afforded the most active catalysts with the strongest N–H···O···H–CX2 interactions. Halogen bonds as alternatives

Identification, synthesis and mass spectrometry of a macrolide from the African reed frog Hyperolius cinnamomeoventris

• Markus Menke,
• Pardha Saradhi Peram,
• Iris Starnberger,
• Walter Hödl,
• Gregory F.M. Jongsma,
• David C. Blackburn,
• Mark-Oliver Rödel,
• Miguel Vences and
• Stefan Schulz

Beilstein J. Org. Chem. 2016, 12, 2731–2738, doi:10.3762/bjoc.12.269

• -trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium reduced the isomerization, leading to an (E/Z)-mixture of 2. Finally, the (Z)-selective Grubbs catalyst 12 furnished the best results [29][30]. This catalyst yielded only the desired product (R)-2 with a (Z

Copper-catalyzed asymmetric sp³ C–H arylation of tetrahydroisoquinoline mediated by a visible light photoredox catalyst

• Pierre Querard,
• Inna Perepichka,
• Eli Zysman-Colman and
• Chao-Jun Li

Beilstein J. Org. Chem. 2016, 12, 2636–2643, doi:10.3762/bjoc.12.260

• of THIQs with arylboronic esters via asymmetric organocatalysis methodology [25][28]. The use of chiral tartaric acid derivatives, 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) and high temperature (70 °C) were found to be the optimal conditions to obtain the desired arylated product with

Facile synthesis of a 3-deazaadenosine phosphoramidite for RNA solid-phase synthesis

• Elisabeth Mairhofer,
• Elisabeth Fuchs and
• Ronald Micura

Beilstein J. Org. Chem. 2016, 12, 2556–2562, doi:10.3762/bjoc.12.250

•  2) [23][24]. Treatment of the 2,6-dichloro-3-deazapurine derivative with ammonia was optimized by Bande et al. recently [25], but still required 200 °C reaction temperature and five days reaction time to afford regioselective displacement of the 2-chlorine atom and concomitant deacetylation in high

A new protocol for the synthesis of 4,7,12,15-tetrachloro[2.2]paracyclophane

• Donghui Pan,
• Yanbin Wang and
• Guomin Xiao

Beilstein J. Org. Chem. 2016, 12, 2443–2449, doi:10.3762/bjoc.12.237

• precursor of parylene D, from 2,5-dichloro-p-xylene. In the first bromination step, with H2O2–HBr as a bromide source, this procedure becomes organic-waste-free and organic-solvent-free and can appropriately replace the existing bromination methods. The Winberg elimination–dimerization step, using aqueous

• prepare tetrachloroparacyclophane, but a pure polysubstituted product is difficult to obtain by electrophilic substitution without repeated crystallization or chromatographic purification [9]. Thus, we report an improved synthesis method using the Winberg dimerization of 2,5-dichloro-(4-methylbenzyl

• )trimethylammonium hydroxide without tedious purification. The important chemical 1-(bromomethyl)-2,5-dichloro-4-methylbenzene is an intermediate in the preparation of 2,5-dichloro-(4-methylbenzyl)trimethylammonium hydroxide. During our investigation of the synthesis of 4,7,12,15-tetrachloro[2.2]paracyclophane, we

Experimental and theoretical investigations into the stability of cyclic aminals

• Edgar Sawatzky,
• Antonios Drakopoulos,
• Martin Rölz,
• Christoph Sotriffer,
• Bernd Engels and
• Michael Decker

Beilstein J. Org. Chem. 2016, 12, 2280–2292, doi:10.3762/bjoc.12.221

• substituents (and therefore the change in electron density at all sides), we used the data reported by Craig [36] for the aromatic site and the data reported by Topliss [37] for the side chains, respectively. A disubstituted 2,6-dichloro compound was also synthesized to study the influence of steric

• . Furthermore, the 2,6-dichloro compound 8f exhibits the same behaviour in terms of stability as the other compounds of the 8 series, even though it adheres to the equatorial minimum energy motif, both in the neutral and in the N-3 protonated form. In conclusion, a comparison of the conformational search and