Synthesis of new bile acid-fused tetrazoles using the Schmidt reaction

• Dušan Đ. Škorić,
• Olivera R. Klisurić,
• Dimitar S. Jakimov,
• Marija N. Sakač and
• János J. Csanádi

Beilstein J. Org. Chem. 2021, 17, 2611–2620, doi:10.3762/bjoc.17.174

• tetrazoles from bile acid precursors was developed. Mild reaction conditions using TMSN3 instead of hydrazoic acid as an azide source produced good yields of the desired tetrazoles. These conditions could be applied to other steroidal precursors. Additionally, an improved methodology for the synthesis of

• selective activity towards certain tumor cell lines. Keywords: antiproliferative activity; Schmidt reaction; steroids; tetrazoles; trimethylsilyl azide; Introduction Bile acids are naturally occurring steroidal surfactants that play various biological roles. Besides the well-known role as lipid

• ]. The main approach in the synthesis of the tetrazoles is 1,3-dipolar cycloaddition between azide and nitrile. These reactions often follow the principles of “click” chemistry [20]. Although the formation of tetrazole in the Schmidt reaction of ketones was noted in the original study by Schmidt himself

Visible-light-mediated copper photocatalysis for organic syntheses

• Yajing Zhang,
• Qian Wang,
• Zongsheng Yan,
• Donglai Ma and
• Yuguang Zheng

Beilstein J. Org. Chem. 2021, 17, 2520–2542, doi:10.3762/bjoc.17.169

• arenes (Scheme 13). In this transformation, the azide anion is oxidized to its radical, and this process requires a high reduction potential that cannot be achieved by iridium and ruthenium-based catalysts. In contrast, [Cu(dap)2]Cl and [Cu(dap)Cl2] were found suitable for the oxidation. Based on a

• mechanistic study, CuII serves as the catalytically active species that undergoes homolytic cleavage to form a CuI species and an azide radical. The latter adds to the alkene to form an alkyl radical, which is then trapped by oxygen to form the desired product. The homolytic cleavage of the active species

• represents a new platform for copper-based photocatalysis (see section 3.3). In 2019, Yu et al. [64] developed a similar copper-catalyzed azidation of activated alkenes with 1-azido-1,2-benziodoxole as the azide radical precursor (Scheme 14). 3.3 Functionalization of alkynes A series of photoinduced copper

Exfoliated black phosphorous-mediated CuAAC chemistry for organic and macromolecular synthesis under white LED and near-IR irradiation

• Azra Kocaarslan,
• Zafer Eroglu,
• Önder Metin and
• Yusuf Yagci

Beilstein J. Org. Chem. 2021, 17, 2477–2487, doi:10.3762/bjoc.17.164

• , Turkey King Abdulaziz University, Faculty of Science, Chemistry Department, 21589 Jeddah, Saudi Arabia 10.3762/bjoc.17.164 Abstract The development of long-wavelength photoinduced copper-catalyzed azide–alkyne click (CuAAC) reaction routes is attractive for organic and polymer chemistry. In this study

• azide derivatives under both white LED and NIR light irradiation. Due to its deeper penetration of NIR light, the possibility of synthesizing different macromolecular structures such as functional polymers, cross-linked networks and block copolymer has also been demonstrated. The structural and

• [40]. BPNs were tested as NIR photoinitiator for the CuAAC reactions of low molar mass compounds and polymers possessing antagonist azide and alkyne functionalities (Figure 1). The optical absorption spectra of BPNs, copper(I) chloride (CuICl, 0.05 mmol) and copper(II) chloride (CuIICl2, 0.05 mmol

Recent advances in the tandem annulation of 1,3-enynes to functionalized pyridine and pyrrole derivatives

• Yi Liu,
• Puying Luo,
• Yang Fu,
• Tianxin Hao,
• Xuan Liu,
• Qiuping Ding and
• Yiyuan Peng

Beilstein J. Org. Chem. 2021, 17, 2462–2476, doi:10.3762/bjoc.17.163

• intramolecular nucleophilic attack by azide and the following deprotonation by a fluoride anion provide the final product 8 (Scheme 5). The derivatization of sulfonated aminonicotinates 8 could easily be achieved. Desulfonylation of aminonicotinate 8b proceeded smoothly in the presence of triflic acid (2.0 equiv

• generate intermediate 20. Then, the intramolecular nucleophilic attack by azide and the following deprotonation give the final product 18 or 19, respectively. 5‑Selenyl- and 5-sulfenyl-substituted nicotinates can carry out versatile transformations, which have potential application in pharmaceutical

• -nitro-1,3-enynes 34 with amines, and trimethylsilyl azide (TMSN3, Scheme 16) [61]. The reaction could be carried out efficiently in the presence of 2.0 equiv of Cu(OAc)2·H2O. Interestingly, the addition of 10 mol % MnCl2 could promote the reaction more smoothly. A wide range of substituted aromatic

(Phenylamino)pyrimidine-1,2,3-triazole derivatives as analogs of imatinib: searching for novel compounds against chronic myeloid leukemia

• Luiz Claudio Ferreira Pimentel,
• Lucas Villas Boas Hoelz,
• Henayle Fernandes Canzian,
• Frederico Silva Castelo Branco,
• Andressa Paula de Oliveira,
• Vinicius Rangel Campos,
• Floriano Paes Silva Júnior,
• Rafael Ferreira Dantas,
• Jackson Antônio Lamounier Camargos Resende,
• Anna Claudia Cunha,
• Nubia Boechat and
• Mônica Macedo Bastos

Beilstein J. Org. Chem. 2021, 17, 2260–2269, doi:10.3762/bjoc.17.144

• obtained from the nucleophilic substitution reaction of intermediate 8 in 85% yield. The 1H and 13C NMR spectra of compounds 8 and 9 were similar, but in the IR spectrum of intermediate 9, it was possible to observe the characteristic stretching of the azide group at 2103 cm−1. The 1,3-dipolar

• products 1a,b, and 2a–j, respectively, with 30–84% yields. This last step was adapted from a method already described in the literature [31]. The formation of compounds 1a,b and 2a–j was observed by the disappearance of the characteristic stretching of the azide groups at 2107 and 2103 cm−1 in the IR

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• 3-amino-2-naphthoic acid (97) to a Sandmeyer reaction and obtained 98. Then, a Curtius rearrangement of 98 by using diphenylphosphoryl azide (DPPA) yielded 3-iodonaphthalen-2-amine, that was subjected to a Suzuki cross-coupling with potassium vinyltrifluoroborate resulting in aminostyrene 99. The

Progress and challenges in the synthesis of sequence controlled polysaccharides

• Giulio Fittolani,
• Theodore Tyrikos-Ergas,
• Denisa Vargová,
• Manishkumar A. Chaube and
• Martina Delbianco

Beilstein J. Org. Chem. 2021, 17, 1981–2025, doi:10.3762/bjoc.17.129

• used in a [2 + 2] glycosylation, affording the tetramer 74 with an alternated N-acetyl pattern (Scheme 11A) [257]. Partially N-acetylated COS dimer and tetramer were obtained exploiting the orthogonality of the azide and N-Troc groups [258]. β-Selectivity during the glycosylation with the C-2 azido

On the application of 3d metals for C–H activation toward bioactive compounds: The key step for the synthesis of silver bullets

• Renato L. Carvalho,
• Amanda S. de Miranda,
• Mateus P. Nunes,
• Roberto S. Gomes,
• Guilherme A. M. Jardim and
• Eufrânio N. da Silva Júnior

Beilstein J. Org. Chem. 2021, 17, 1849–1938, doi:10.3762/bjoc.17.126

• compounds in excellent yields and short reaction times (Scheme 21B and C). The robustness of the manganese-catalyzed photo-flow reaction was demonstrated by a gram-scale preparation of the key intermediate in the synthesis of the pharmaceutical compound dantrolene (60) in high yields (Scheme 21D). The azide

• variety of functionalized compounds, from arylated compounds to new azide substances. This is an important characteristic in the synthesis and evaluation of biologically active molecules, since using different methods, a large variety of potential compounds can be obtained and studied. Larger scopes

Cationic oligonucleotide derivatives and conjugates: A favorable approach for enhanced DNA and RNA targeting oligonucleotides

• Mathias B. Danielsen and
• Jesper Wengel

Beilstein J. Org. Chem. 2021, 17, 1828–1848, doi:10.3762/bjoc.17.125

• attempt to introduce high yielding phosphoramidite building blocks suitable for automated ON synthesis, 2′-O-aminoethoxymethyl and 2′-O-aminopropoxymethyl nucleotides were developed. This method introduced the primary amine functionality through an azide reduction [73]. The corresponding monomers 37 and

Sustainable manganese catalysis for late-stage C–H functionalization of bioactive structural motifs

• Jongwoo Son

Beilstein J. Org. Chem. 2021, 17, 1733–1751, doi:10.3762/bjoc.17.122

• conjugative transformations, such as azide–alkyne [3 + 2]-cycloaddition [30][31][32][33][34][35][36][37]. Based on their previous late-stage fluorination studies [22][25], Groves et al. further showcased a manganese(III)–salen-catalyzed azidation process using an aqueous azide solution as a convenient azide

• azidation product 11. Upon regeneration, the catalyst participates in the next catalytic cycle. In this Mn-catalyzed azidation study, the azide/oxygenated product ratio was 2:1–4:1. Therefore, a chemoselective manner is of dire need to avoid unwanted C–H oxygenation. In 2020, the Lei group disclosed the

• and loxoprofen underwent regioselective azidation at the secondary benzylic sites over tertiary benzylic sites (see 13d and 13e). Additional mechanistic studies support the reaction pathway depicted in Figure 4. The azide anion is oxidized to a radical species on the anodic surface, where Mn(II)/L–N3

Chemical approaches to discover the full potential of peptide nucleic acids in biomedical applications

• Nikita Brodyagin,
• Martins Katkevics,
• Venubabu Kotikam,
• Christopher A. Ryan and
• Eriks Rozners

Beilstein J. Org. Chem. 2021, 17, 1641–1688, doi:10.3762/bjoc.17.116

A recent overview on the synthesis of 1,4,5-trisubstituted 1,2,3-triazoles

• Pezhman Shiri,
• Ali Mohammad Amani and
• Thomas Mayer-Gall

Beilstein J. Org. Chem. 2021, 17, 1600–1628, doi:10.3762/bjoc.17.114

• -catalyzed azide–alkyne cycloaddition (CuAAC) for the synthesis of 1,4-disubstituted 1,2,3-triazole derivatives was initially discovered by the groups of Meldal and Sharpless. Then, Ru-catalyzed azide–alkyne cycloaddition (RuAAC), affording selectively 1,5-disubstituted 1,2,3-triazoles, was introduced [38

• irrespective of the nature and position of the substituent [39]. The supposed reaction mechanism for the reaction is shown in Scheme 3. Initially, the presence of bromine as an electron-withdrawing substituent lowers the LUMO energy to facilitate the cycloaddition process of acrolein with organic azide. The

• group compatibility, including using enaminones containing aliphatic and aromatic substituents as well as azide compounds containing electron-donating and -withdrawing groups on the aromatic ring. In all cases, only 4-acyl-substituted regioisomers were obtained (Scheme 4) [40]. The mechanism was also

Total synthesis of ent-pavettamine

• Memory Zimuwandeyi,
• Manuel A. Fernandes,
• Amanda L. Rousseau and
• Moira L. Bode

Beilstein J. Org. Chem. 2021, 17, 1440–1446, doi:10.3762/bjoc.17.99

• tosylate under basic conditions affording 24 in a yield of 83%. The displacement of the tosyl group with an azide whilst heating the reaction at 80 °C allowed for the isolation of azide 25 in a good yield of 75%. Heating at higher temperatures resulted in product decomposition. Hydrogenation of the azide

Double-headed nucleosides: Synthesis and applications

• Vineet Verma,
• Jyotirmoy Maity,
• Vipin K. Maikhuri,
• Ritika Sharma,
• Himal K. Ganguly and
• Ashok K. Prasad

Beilstein J. Org. Chem. 2021, 17, 1392–1439, doi:10.3762/bjoc.17.98

• ]. Nielsen and co-workers [43] synthesized 2′-(4-(thymin-1-ylmethyl)-1,2,3-triazole-1-yl)- and 2′-(4-(N6-benzoyladenine-9-ylmethyl)-1,2,3-triazole-1-yl)-substituted double-headed nucleosides of 2′-deoxy-5′-O-(4,4′-dimethoxytrityl)uridine (14 and 15) from the nucleoside azide 12 which in turn was obtained by

• protection of 16 followed by introduction of an azide group in the C-2′ position of the molecule to afford nucleoside 22. The treatment of azide 22 with pyrrolidine in acetonitrile followed by hydrogenation afforded aminonucleoside 23, which was used as a key intermediate for the synthesis of the double

• the literature [30][32][49]. The spironucleoside 2 was then reacted with sodium azide to afford the arabino-uridine 38 with an azidomethyl group in the C-2′ position. The arabino-uridine 38 was reacted with TBAF and 4,4′-dimethoxytrityl chloride to afford nucleoside 39 which was reacted with 1

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

Synthesis of multiply fluorinated N-acetyl-D-glucosamine and D-galactosamine analogs via the corresponding deoxyfluorinated glucosazide and galactosazide phenyl thioglycosides

• Vojtěch Hamala,
• Lucie Červenková Šťastná,
• Martin Kurfiřt,
• Petra Cuřínová,
• Martin Dračínský and
• Jindřich Karban

Beilstein J. Org. Chem. 2021, 17, 1086–1095, doi:10.3762/bjoc.17.85

• thioglycosides prepared from deoxyfluorinated 1,6-anhydro-2-azido-β-ᴅ-hexopyranose precursors by ring-opening reaction with phenyl trimethylsilyl sulfide. Nucleophilic deoxyfluorination at C4 and C6 by reaction with DAST, thioglycoside hydrolysis and azide/acetamide transformation completed the synthesis

• donors for the installation of a 1,2-cis-linked multifluorinated GlcNAc and GalNAc moiety. Results and Discussion Our approach to the synthesis is summarized in Scheme 1. Challenging regio- and stereoselective introduction of fluorine at C3 and C4 of the pyranose ring, together with azide installation at

• 1,6-anhydro derivative 10, we were able to isolate one of the side-products in sufficient purity and quantity to assign the structure of C-furanoside 20 (Scheme 2). This compound resulted from pyranose ring contraction probably caused by intramolecular displacement of the C2 azide aided by

Manganese/bipyridine-catalyzed non-directed C(sp³)–H bromination using NBS and TMSN₃

• Kumar Sneh,
• Takeru Torigoe and
• Yoichiro Kuninobu

Beilstein J. Org. Chem. 2021, 17, 885–890, doi:10.3762/bjoc.17.74

• (sp3)–H bromination reaction. The proposed reaction mechanism is shown in Scheme 5, which involves the following steps. (1) The reaction between NBS and TMSN3 generates bromine azide via the elimination of N-(trimethylsilyl)succinimide [52][53]; (2) bromine and azide radicals are then formed via

• homolytic cleavage of the weak Br–N3 bond in bromine azide [54][55]; (3) the bromine radical can also be generated from NBS with the formation of a succinimide radical; (4) alkyl radical intermediate A is then formed via hydrogen abstraction by the succinimidyl radical and/or azidyl radical [56][57]; (5

Microwave-assisted multicomponent reactions in heterocyclic chemistry and mechanistic aspects

• Shivani Gulati,
• Stephy Elza John and
• Nagula Shankaraiah

Beilstein J. Org. Chem. 2021, 17, 819–865, doi:10.3762/bjoc.17.71

Synthetic reactions driven by electron-donor–acceptor (EDA) complexes

• Zhonglie Yang,
• Yutong Liu,
• Kun Cao,
• Xiaobin Zhang,
• Hezhong Jiang and
• Jiahong Li

Beilstein J. Org. Chem. 2021, 17, 771–799, doi:10.3762/bjoc.17.67

• , promoted by irradiation with visible light. In 2017, Shirke and Ramaastry [40] proposed an organic catalyzed β-azide reaction of ketene 155 initiated by the EDA complex formed by DABCO and Zhdankin reagent 156 (Scheme 54). A variety of β-azidoketones was conveniently obtained with good to excellent yield

• initiated by an EDA complex. Synthesis of boration product 151 initiated by an EDA complex. Synthesis of boronic acid ester derivative 154 initiated by an EDA complex. Synthesis of β-azide product 157 initiated by an EDA complex. Decarboxylation reaction initiated by an EDA complex. Synthesis of amidated

Synthesis of β-triazolylenones via metal-free desulfonylative alkylation of N-tosyl-1,2,3-triazoles

• Soumyaranjan Pati,
• Renata G. Almeida,
• Eufrânio N. da Silva Júnior and
• Irishi N. N. Namboothiri

Beilstein J. Org. Chem. 2021, 17, 762–770, doi:10.3762/bjoc.17.66

• Meldal have independently developed a copper-catalysed azide–alkyne cycloaddition that accelerated the rate of the reaction and allowed the selective preparation of 1,5-disubstituted 1,2,3-triazoles [16][17][18][19]. As noted above, a wide range of methods are available in the literature for the

• -triazoles with alkynes and Rh catalysed N1 and N2 selective alkylations [24][25]. As for metal-free approaches, besides synthesizing N-alkylated triazoles via 1,3-dipolar cycloaddition of alkyl azide with enols generated from carbonyl compounds under transition metal-free conditions [26], a direct

DNA with zwitterionic and negatively charged phosphate modifications: Formation of DNA triplexes, duplexes and cell uptake studies

• Yongdong Su,
• Maitsetseg Bayarjargal,
• Tracy K. Hale and
• Vyacheslav V. Filichev

Beilstein J. Org. Chem. 2021, 17, 749–761, doi:10.3762/bjoc.17.65

• modifications were introduced into the DNA backbone using the Staudinger reaction between the 3’,5’-dinucleoside β-cyanoethyl phosphite triester formed during DNA synthesis and sulfonyl azides, 4-(azidosulfonyl)-N,N,N-trimethylbutan-1-aminium iodide (N+ azide) or p-toluenesulfonyl (tosyl or Ts) azide, to

• Synthesis and purification of modified ONs 4-(Azidosulfonyl)-N,N,N-trimethylbutan-1-aminium iodide [38] and tosyl azide (p-toluenesulfonyl azide, TsN3) [39] were synthesised and used for the synthesis of the modified ONs using an automated DNA synthesiser as described. The solution of sulfonyl azide (0.5 M

• yield was also improved by minimising the handling of the solid support and performing the reaction using a microtube pump to deliver the sulfonyl azide solution onto the column with CPG support. The cleaved and deprotected N+- and Ts-ONs were initially purified using reversed-phase (RP) HPLC. However

Stereoselective syntheses of 3-aminocyclooctanetriols and halocyclooctanetriols

• Emine Salamci and
• Yunus Zozik

Beilstein J. Org. Chem. 2021, 17, 705–710, doi:10.3762/bjoc.17.59

• the corresponding cyclic sulfate via the formation of a cyclic sulfite in the presence of catalytic RuO4. The reaction of this cyclic sulfate with a nucleophilic azide followed by the reduction of the azide group provided the target, 3-aminocyclooctanetriol. The second key compound, bromotriol, was

• prepared by epoxidation of the cyclooctenediol with m-chloroperbenzoic acid followed by hydrolysis with HBr(g) in methanol. Treatment of bromotriol with NaN3 and the reduction of the azide group yielded the other desired 3-aminocyclooctanetriol. Hydrolysis of the epoxides with HCl(g) in methanol gave

• with sodium azide of the corresponding cyclic sulfate intermediate 9, which contains the only stereocentre. The cyclic sulfate 9 could be synthesized from diacetatediol 7 [33]. For this purpose, the reduction of the endoperoxide 5 with zinc followed by acetylation of the hydroxy group and OsO4/NMO

Effective microwave-assisted approach to 1,2,3-triazolobenzodiazepinones via tandem Ugi reaction/catalyst-free intramolecular azide–alkyne cycloaddition

• Maryna O. Mazur,
• Oleksii S. Zhelavskyi,
• Eugene M. Zviagin,
• Svitlana V. Shishkina,
• Vladimir I. Musatov,
• Maksim A. Kolosov,
• Elena H. Shvets,
• Anna Yu. Andryushchenko and
• Valentyn A. Chebanov

Beilstein J. Org. Chem. 2021, 17, 678–687, doi:10.3762/bjoc.17.57

• followed by microwave-assisted intramolecular azide–alkyne cycloaddition (IAAC) gave a series of target heterocyclic compounds in moderate to excellent yields. Surprisingly, the normally required ruthenium-based catalysts were found to not affect the IAAC, only making isolation of the target compounds

• to a large number of diverse heterocyclic compounds [10][11]. Over the past decade, several cases of using an Ugi four-component reaction (Ugi-4CR) in combination with intramolecular azide–alkyne cycloaddition (IAAC) for the synthesis of 1,2,3-triazolobenzodiazepines were reported [3][7][12][13][14

• includes a [3 + 2] click reaction between the azide ion with the triple bond and further C–N coupling instead of the IAAC reaction. Compounds having no fused benzene ring or with a heterocyclic moiety instead could also be obtained via the tandem approach Ugi reaction/IAAC [15][16]. Despite the

1,2,3-Triazoles as leaving groups: S_NAr reactions of 2,6-bistriazolylpurines with O- and C-nucleophiles

• Dace Cīrule,
• Irina Novosjolova,
• Ērika Bizdēna and
• Māris Turks

Beilstein J. Org. Chem. 2021, 17, 410–419, doi:10.3762/bjoc.17.37

• of purine [73][74][75][76] or alkylation of inosine or guanosine derivatives (Ib→II, Scheme 1) [30][36]. In the next step, azide can be introduced either by a second SNAr reaction on the C2-halo derivative or by diazotization/azidation at C2. Then, the Cu(I)-catalyzed azide–alkyne cycloaddition

• reactions at C(6) (V→VI→IV, Scheme 1) [11][14][62][63][77][78]. The main advantage of pathway B is a straightforward access to 2,6-diazidopurines V and 2,6-bistriazolylpurines VI due to excellent nucleophilic properties of the azide ion and well-established CuAAC reaction. Pathway B also avoids performing

Coupling biocatalysis with high-energy flow reactions for the synthesis of carbamates and β-amino acid derivatives

• Alexander Leslie,
• Thomas S. Moody,
• Megan Smyth,
• Scott Wharry and
• Marcus Baumann

Beilstein J. Org. Chem. 2021, 17, 379–384, doi:10.3762/bjoc.17.33

• ) as the azide donor to facilitate the generation and immediate use of the intermediate acyl azide that would rearrange to an isocyanate upon heating. Toluene was chosen as a suitable solvent providing good solubility of the acid substrates (1 M) in the presence of triethylamine (1.0 equiv