Versatile synthesis of end-reactive polyrotaxanes applicable to fabrication of supramolecular biomaterials

• Atsushi Tamura,
• Asato Tonegawa,
• Yoshinori Arisaka and
• Nobuhiko Yui

Beilstein J. Org. Chem. 2016, 12, 2883–2892, doi:10.3762/bjoc.12.287

• )ethylamine (HEEA) were obtained from TCI (Tokyo, Japan). 4-(4,6-Dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMT-MM) and copper(II) sulfate pentahydrate (CuSO4) were obtained from Wako Pure Chemical Industries (Osaka, Japan). N,N’-Carbonyldiimidazole (CDI) and (+)-sodium L-ascorbate were

Copper-catalyzed asymmetric sp³ C–H arylation of tetrahydroisoquinoline mediated by a visible light photoredox catalyst

• Pierre Querard,
• Inna Perepichka,
• Eli Zysman-Colman and
• Chao-Jun Li

Beilstein J. Org. Chem. 2016, 12, 2636–2643, doi:10.3762/bjoc.12.260

• -catalyst in DME as solvent, we observed a trace amount of the desired product at room temperature. When different copper salts were evaluated, it was found that CuBr was less active (Table 1, entry 1) and copper(II) bromide provided the highest yield for the arylation of THIQ with phenylboronic acid (2

• toluene and THF (Table 1, entries 7 and 8). On the other hand, highly polar solvents such as MeCN and MeOH were not beneficial for the formation of the desired product 3a (Table 1, entries 9 and 10). Control experiments performed in the absence of photoredox catalyst and/or transition metal copper(II

• -arylated PyBox L2 gave very good er under our reaction conditions (Table 2, entry 2). It is noteworthy that the er observed was higher when copper(I) bromide was used as a co–catalyst, compared to copper(II) bromide (Table 2, entry 3), possibly due to the Lewis acidity difference of Cu(I) and Cu(II

Catalytic Chan–Lam coupling using a ‘tube-in-tube’ reactor to deliver molecular oxygen as an oxidant

• Carl J. Mallia,
• Paul M. Burton,
• Alexander M. R. Smith,
• Gary C. Walter and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2016, 12, 1598–1607, doi:10.3762/bjoc.12.156

• for C(aryl)–N and C(aryl)–O coupling reactions. Their methods made use of stoichiometric amounts of copper(II) acetate as the catalyst and boronic acids as the aryl donors. In the presence of a base, the coupling could be performed at room temperature. These reactions were subsequently shown to work

• active compounds [11][12]. In 2009 the groups of Stevens and van der Eycken reported on the Chan–Lam reaction as a continuous flow protocol using copper(II) acetate (1.0 equiv), pyridine (2.0 equiv) and triethylamine (1.0 equiv) in dichloromethane [13]. Generally, when using anilines or phenols as the

• potentially an improvement on the use of stiochiometric copper(II) acetate in continuous flow, the use of TEMPO or tert-butyl peroxybenzoate as a co-oxidant introduces waste. Employing oxygen gas as an oxidant is preferred as it is cheap, renewable and environmentally benign. We therefore set out to develop a

Artificial Diels–Alderase based on the transmembrane protein FhuA

• Hassan Osseili,
• Daniel F. Sauer,
• Klaus Beckerle,
• Marcus Arlt,
• Tomoki Himiyama,
• Tino Polen,
• Akira Onoda,
• Ulrich Schwaneberg,
• Takashi Hayashi and
• Jun Okuda

Beilstein J. Org. Chem. 2016, 12, 1314–1321, doi:10.3762/bjoc.12.124

• copper(II) complexes were covalently linked to an engineered variant of the transmembrane protein Ferric hydroxamate uptake protein component A (FhuA ΔCVFtev). Copper(I) was incorporated using an N-heterocyclic carbene (NHC) ligand equipped with a maleimide group on the side arm at the imidazole nitrogen

• . Copper(II) was attached by coordination to a terpyridyl ligand. The spacer length was varied in the back of the ligand framework. These biohybrid catalysts were shown to be active in the Diels–Alder reaction of a chalcone derivative with cyclopentadiene to preferentially give the endo product. Keywords

Synthesis of 2-substituted tetraphenylenes via transition-metal-catalyzed derivatization of tetraphenylene

• Shulei Pan,
• Hang Jiang,
• Yanghui Zhang,
• Yu Zhang and
• Dushen Chen

Beilstein J. Org. Chem. 2016, 12, 1302–1308, doi:10.3762/bjoc.12.122

• synthesis of tetraphenylene in 1943 [22], in which 2,2’-dibromobiphenyl was converted to its corresponding Grignard reagent and subsequent addition of copper(II) chloride provided 1 in 16% yield, a variety of methods for constructing the tetraphenylene skeleton have been developed [23][24][25][26][27][28

Synthesis, fluorescence properties and the promising cytotoxicity of pyrene–derived aminophosphonates

• Jarosław Lewkowski,
• Maria Rodriguez Moya,
• Anna Wrona-Piotrowicz,
• Janusz Zakrzewski,
• Renata Kontek and
• Gabriela Gajek

Beilstein J. Org. Chem. 2016, 12, 1229–1235, doi:10.3762/bjoc.12.117

• -yl)methyleneamine [17], a N-(1-pyrene)methylideneglucosamine mercury complex [18], a N-(pyren-1-ylidene)-2-hydroxyaniline-copper(II) and -zinc(II) complexes [19] or N-(pyren-1-ylidene)-4-carboxyaniline-Fe(II) and -Cr(III) complexes [20]. Several phosphorus-supported ligands containing a pyrene-1

Bi- and trinuclear copper(I) complexes of 1,2,3-triazole-tethered NHC ligands: synthesis, structure, and catalytic properties

• Shaojin Gu,
• Jiehao Du,
• Jingjing Huang,
• Huan Xia,
• Ling Yang,
• Weilin Xu and
• Chunxin Lu

Beilstein J. Org. Chem. 2016, 12, 863–873, doi:10.3762/bjoc.12.85

• SQUEEZE [48]. Further details of the structural analysis are summarized in Table 3. X-ray diffraction structure of copper(II) complex 2 with thermal ellipsoids drawn at 30% probability. The anion and hydrogen atoms are omitted for clarity. Selected bond distances (Å) and angles (°): Cu1-O1 1.931(4), Cu1

Studies on the synthesis of peptides containing dehydrovaline and dehydroisoleucine based on copper-mediated enamide formation

• Franziska Gille and
• Andreas Kirschning

Beilstein J. Org. Chem. 2016, 12, 564–570, doi:10.3762/bjoc.12.55

• order to avoid oxidation and formation of copper(II) which can act as a Lewis acid. These changes provided peptide 14 (Table 1, entry 1) but this result turned out not to be reproducible. Instead, when the reaction time was extended, only the formation of the α-ketoamide 15 was encountered (Table 1

Copper-mediated arylation with arylboronic acids: Facile and modular synthesis of triarylmethanes

• H. Surya Prakash Rao and
• A. Veera Bhadra Rao

Beilstein J. Org. Chem. 2016, 12, 496–504, doi:10.3762/bjoc.12.49

• which the final step is the copper(II)-catalyzed arylation of diarylmethanols with arylboronic acids. By using this protocol a variety of symmetrical and unsymmetrical triarylmethanes were synthesized. As an application of the newly developed methodology, we demonstrate a high-yielding synthesis of the

• report a copper(II) triflate-catalyzed modular synthesis of triarylmethanes by employing diarylmethanols 9 and arylboronic acids 10. It is advantageous to employ a base metal catalyst such as copper(II) triflate instead of palladium [55][56] or nickel (Ni) [57] catalysts and to avoid the use of phosphine

• above observations, we propose a mechanism for the copper-mediated coupling of phenylboronic acid with diphenylmethanol, leading to triphenylmethane and boric acid (Scheme 3). At the start of the cascade, the first step is the transmetallation of the copper(II) into phenylboronic acid to form reactive

Interactions of cyclodextrins and their derivatives with toxic organophosphorus compounds

• Sophie Letort,
• Sébastien Balieu,
• William Erb,
• Géraldine Gouhier and
• François Estour

Beilstein J. Org. Chem. 2016, 12, 204–228, doi:10.3762/bjoc.12.23

• efficiency of the CD derivative, the monofunctionalization of the C-3 alcohols was carried out [86]. The temporary complexation of specific β-CD secondary hydroxy functions allows the monofunctionalization of the C-3 position through the formation of a copper(II)–β-CD complex. A diagonal link between copper

Copper-catalyzed aminooxygenation of styrenes with N-fluorobenzenesulfonimide and N-hydroxyphthalimide derivatives

• Yan Li,
• Xue Zhou,
• Guangfan Zheng and
• Qian Zhang

Beilstein J. Org. Chem. 2015, 11, 2721–2726, doi:10.3762/bjoc.11.293

• , the oxidation of Cu(I) with NFSI provided F–Cu(III)–N complex I, which could transform into a copper(II)-stabilized benzenesulfonimide radical II through a redox isomerization equilibrium. Next, the intermolecular radical addition of II to styrene 1g took place, producing benzylic radical III and Cu

Synthesis of bi- and bis-1,2,3-triazoles by copper-catalyzed Huisgen cycloaddition: A family of valuable products by click chemistry

• Zhan-Jiang Zheng,
• Ding Wang,
• Zheng Xu and
• Li-Wen Xu

Beilstein J. Org. Chem. 2015, 11, 2557–2576, doi:10.3762/bjoc.11.276

• diazo transfer agent (imidazole-1-sulfonyl azide) was performed to convert the amine group into the corresponding azide group, which provided a polymeric substrate for the second CuAAC reaction to give the desired bistriazoles (Scheme 23). In 2009, Zhu and co-workers found that copper(II) acetate (Cu

Synthesis of Xenia diterpenoids and related metabolites isolated from marine organisms

• Tatjana Huber,
• Lara Weisheit and
• Thomas Magauer

Beilstein J. Org. Chem. 2015, 11, 2521–2539, doi:10.3762/bjoc.11.273

• rhodium carbenoid derived from diazophosphonoacetate 100 and alcohol 99 afforded intermediate 101 which was treated with lithium diisopropylamide and aldehyde 102 to afford alkene 103 with high E-selectivity. The following asymmetric copper(II)-catalyzed Claisen rearrangement [55], which is postulated to

Copper-catalyzed asymmetric conjugate addition of organometallic reagents to extended Michael acceptors

• Thibault E. Schmid,
• Sammy Drissi-Amraoui,
• Christophe Crévisy,
• Olivier Baslé and
• Marc Mauduit

Beilstein J. Org. Chem. 2015, 11, 2418–2434, doi:10.3762/bjoc.11.263

• combination of copper(II) naphthenate (CuNaph) and SimplePhos L16 as the catalytic system [40]. The reported methodology involved a regioselective 1,4 ACA of trimethylaluminium followed by the trapping of the aluminium enolate intermediate with (n-butoxymethyl)diethylamine. An oxidation–elimination sequence

Recent advances in copper-catalyzed C–H bond amidation

• Jie-Ping Wan and
• Yanfeng Jing

Beilstein J. Org. Chem. 2015, 11, 2209–2222, doi:10.3762/bjoc.11.240

• copper(II) trifluoromethanesulfonate. The notable advantage of this protocol was that simple tosylamide had been directly used as amide nucleophile. The key point enabling the sulfonamidation transformation was the in situ generation of PhI=NTs (21) by employing PhI(OAc)2 in the reaction (Scheme 5

• the reaction in the synthesis of indoles was later achieved by mean of ligand-free condition via the co-catalysis of Cu(eh)2 (copper(II) 2-ethylhexanoate) and TEMPO under oxygen atmosphere [68]. C(sp)–H bond amidation The C(sp)–H bond in terminal alkynes is more acidic than equivalent alkane and

C–H bond halogenation catalyzed or mediated by copper: an overview

• Wenyan Hao and
• Yunyun Liu

Beilstein J. Org. Chem. 2015, 11, 2132–2144, doi:10.3762/bjoc.11.230

• ] devised a practical copper-catalyzed halogenation of anilines 8 containing an easily removable N-(2-pyridyl)sulfonyl auxiliary. In the presence of copper(II) halide catalyst and NXS (X = Cl or Br), a class of o-chloro/bromoanilines 9 were efficiently provided under aerobic atmosphere (Scheme 6). The N-(2

• process (Scheme 12). In the presence of a Cu(II) catalyst, the one-electron oxidation to the phenol led to the occurrence of phenoxy radical 25 via the formation of phenoxyl copper(II) salt 24. The isomeric free radical species 26 then rapidly captured the halogen atom from LiX to give the target product

• biological functions of halogenated heteroarenes [57], the synthesis of haloheteroarenes via the corresponding arene C–H halogenations also gained extensive attention. In 2009, Pike and co-workers [58] reported the synthesis of halogenated 1,3-thiazoles using copper(II) halide as a catalyst. As shown in

Chiral Cu(II)-catalyzed enantioselective β-borylation of α,β-unsaturated nitriles in water

• Lei Zhu,
• Taku Kitanosono,
• Pengyu Xu and
• Shū Kobayashi

Beilstein J. Org. Chem. 2015, 11, 2007–2011, doi:10.3762/bjoc.11.217

• Lei Zhu Taku Kitanosono Pengyu Xu Shu Kobayashi Department of Chemistry, School of Sciences, The University of Tokyo, Hongo, Bunkyo-ku, Tokyo, Japan 10.3762/bjoc.11.217 Abstract The promising performance of copper(II) complexes was demonstrated for asymmetric boron conjugate addition to α,β

• substrates were suitable despite being insoluble in water. Keywords: carbon–boron bond formation; catalytic asymmetric synthesis; chiral copper(II) catalysis; β-hydroxy nitriles; Introduction In recent years, optically active organoboranes have attracted considerable attraction as versatile synthons for

Synthesis of constrained analogues of tryptophan

• Elisabetta Rossi,
• Valentina Pirovano,
• Marco Negrato,
• Giorgio Abbiati and
• Monica Dell’Acqua

Beilstein J. Org. Chem. 2015, 11, 1997–2006, doi:10.3762/bjoc.11.216

• only using copper(II) triflate as catalyst (Table 1, entry 5). Unsatisfactory results were obtained also in the presence of gold(III) and gold(I) catalysts (Table 1, entries 8 and 9). Only in the presence of a cationic gold(I) complex the diastereoisomeric cycloadducts 3a and 3'a were isolated in 20

Effective ascorbate-free and photolatent click reactions in water using a photoreducible copper(II)-ethylenediamine precatalyst

• Redouane Beniazza,
• Natalia Bayo,
• Florian Molton,
• Carole Duboc,
• Stéphane Massip,
• Nathan McClenaghan,
• Dominique Lastécouères and
• Jean-Marc Vincent

Beilstein J. Org. Chem. 2015, 11, 1950–1959, doi:10.3762/bjoc.11.211

• water in the absence of sodium ascorbate is an active area of current research with strong potential for applications in bioconjugation. The water-soluble and photoreducible copper(II)–EDA (EDA = ethylenediamine) complex 1, which has two 4-benzoylbenzoates acting as both counterion and photosensitizer

• Gautier and coworkers based on a water-soluble Cu(I)–NHC complex, which could be used under ascorbate-free and open air conditions for the CuAAC ligation of oxidation-sensitive peptides in buffered aqueous media [10]. Recently, we developed the photoreducible copper(II) complexes 2 and 3 incorporating a

• organic solvents, typically MeOH, THF or toluene. It should be noted that within the last four years, other photoreducible copper(II)-based catalytic systems applied to click chemistry have been reported [15][16][17][18][19][20][21][22][23][24][25][26][27], in particular for the preparation of polymers

The facile construction of the phthalazin-1(2H)-one scaffold via copper-mediated C–H(sp²)/C–H(sp) coupling under mild conditions

• Wei Zhu,
• Bao Wang,
• Shengbin Zhou and
• Hong Liu

Beilstein J. Org. Chem. 2015, 11, 1624–1631, doi:10.3762/bjoc.11.177

• combination of Cu(OAc)2 and Li2CO3 in DMF under an oxygen atmosphere (Table 1, entry 1). As shown in Table 1, various bases, copper(II) salts and solvents were screened for the best reaction conditions. With Cu(OAc)2 as the transition metal and DMF as the solvent at 90 °C under oxygen atmosphere, we tested

• recovered in good yield. Based on previous works [22][23][25], a copper(II)-mediated C–H functionalization pathway is proposed in Scheme 5. A base-promoted cupration of the relatively acidic C–H of ethynylbenzene provides ethynylcopper intermediate M1. The following bidentate chelation with 1a yields

Star-shaped tetrathiafulvalene oligomers towards the construction of conducting supramolecular assembly

• Masahiko Iyoda and
• Masashi Hasegawa

Beilstein J. Org. Chem. 2015, 11, 1596–1613, doi:10.3762/bjoc.11.175

• ]. Reflecting its strong π-donor ability, 1 was oxidized spontaneously in solution to afford 1•+ under ambient conditions. Multifunctional TTF-crown ether-substituted phthalocyanine (Pc) 2a and its copper(II) complex 2b were reported by Amabilino, Rowan, Nolte, and co-workers in 2005 [40]. The giant molecule 2a

Synthesis and spectroscopic properties of β-triazoloporphyrin–xanthone dyads

• Dileep Kumar Singh and
• Mahendra Nath

Beilstein J. Org. Chem. 2015, 11, 1434–1440, doi:10.3762/bjoc.11.155

• )-catalyzed Huisgen 1,3-dipolar cycloaddition reaction of copper(II) 2-azido-5,10,15,20-tetraphenylporphyrin or zinc(II) 2-azidomethyl-5,10,15,20-tetraphenylporphyrin with various alkyne derivatives of xanthones in DMF containing CuSO4 and ascorbic acid at 80 °C. Furthermore, these metalloporphyrins underwent

• ), 3-ethynyl-6-nitroxanthen-9-one (4), and 3-ethynyl-6-methoxyxanthen-9-one (5) were synthesized by using the literature procedures [39][40][47][48][49]. In addition, copper(II) 2-azido-5,10,15,20-tetraphenylporphyrin (1) [50] was synthesized in good yield after the treatment of copper(II) 2-amino

• and BF3·Et2O in 1,4-dioxane at 80 °C for 2 hours [51]. Initially, the copper(II) and zinc(II) derivatives of β-triazoloporphyrin–xanthone conjugates 6a,d,g and 7a,c were synthesized in 60–76% yields through a copper(I)-catalyzed Huisgen 1,3-dipolar cycloaddition reaction between copper(II) 2-azido

Synthesis of alpha-tetrasubstituted triazoles by copper-catalyzed silyl deprotection/azide cycloaddition

• Zachary L. Palchak,
• Paula T. Nguyen and
• Catharine H. Larsen

Beilstein J. Org. Chem. 2015, 11, 1425–1433, doi:10.3762/bjoc.11.154

• triazoles. A streamlined two-step approach to this uncommon class of hindered triazoles will accelerate exploration of their therapeutic potential. The superior activity of copper(II) triflate in the formation of triazoles from sensitive alkyne substrates extends to simple terminal alkynes. Keywords: azide

• was not stable in the presence of the copper(II) chloride catalyst, and triethylsilylacetylene did not convert cleanly to product. Triisopropylsilyl (TIPS) acetylene was found to be superior to tert-butyldimethylsilylacetylene as a source of silylated tetrasubstituted propargylic amines. Although TMS

• ) as well as copper(II) sources with an equal amount of sodium ascorbate as the reducing agent were tested in MeOH (Table 1, entries 6–14). All combinations of copper(II) salts with reductant provide higher GC yields (79–99%, Table 1, entries 9–14) than CuCl alone (65%, Table 1, entry 6) at 18 h

Intermolecular addition reactions of N-alkyl-N-chlorosulfonamides to unsaturated compounds

• Gerold Heuger and
• Richard Göttlich

Beilstein J. Org. Chem. 2015, 11, 1226–1234, doi:10.3762/bjoc.11.136

• using copper(I) chloride as the catalyst, which (after oxidation to copper(II) chloride) captures carbon radicals at a diffusion controlled rate [38]. Indeed using copper(I) chloride as the catalyst we obtained a yield of 60% of the addition product with sulfonamide 1a being the remaining side product

Design, synthesis and photochemical properties of the first examples of iminosugar clusters based on fluorescent cores

• Mathieu L. Lepage,
• Antoine Mirloup,
• Manon Ripoll,
• Fabien Stauffert,
• Anne Bodlenner,
• Raymond Ziessel and
• Philippe Compain

Beilstein J. Org. Chem. 2015, 11, 659–667, doi:10.3762/bjoc.11.74

• bearing a tetraethylene glycol chain tethered to the boron center via an ethynyl bond proved difficult. The use of copper(I) bromide dimethyl sulfide complex [63] at room temperature led to a complex mixture of products. Better results were obtained with copper(II) sulfate and sodium ascorbate under