A novel and robust heterogeneous Cu catalyst using modified lignosulfonate as support for the synthesis of nitrogen-containing heterocycles

• Bingbing Lai,
• Meng Ye,
• Ping Liu,
• Minghao Li,
• Rongxian Bai and
• Yanlong Gu

Beilstein J. Org. Chem. 2020, 16, 2888–2902, doi:10.3762/bjoc.16.238

• significant damage of the Cu species. The pyridine-containing moiety, such as arylpyridines, widely exist in natural products, pharmaceutical agents and functional materials [34][35][36][37]. Traditional methods for synthesizing pyridine-containing derivatives include condensation reactions, cross-coupling

Changed reactivity of secondary hydroxy groups in C8-modified adenosine – lessons learned from silylation

• Jennifer Frommer and
• Sabine Müller

Beilstein J. Org. Chem. 2020, 16, 2854–2861, doi:10.3762/bjoc.16.234

• phosphoramidite building block 9 (Scheme 2). Results and Discussion Typically, the synthesis of C8-alkynyl derivatives relies on C8-bromoadenosine as reactant for the Sonogashira cross-coupling reaction to introduce the amino linker N-(propyn-2-yl)-6-(trifluoroacetamido)hexanamide (L) bearing an alkynyl moiety

• , which allows its selective removal with simultaneous preservation of the 2’-O-TBDMS group. This advantage on the one hand, might cause problems on the other. It was not for sure, if the cyclic silyl ether would be sufficiently stable under the conditions of iodination and Sonogashira cross coupling, and

Synthesis and characterization of S,N-heterotetracenes

• Astrid Vogt,
• Florian Henne,
• Christoph Wetzel,
• Elena Mena-Osteritz and
• Peter Bäuerle

Beilstein J. Org. Chem. 2020, 16, 2636–2644, doi:10.3762/bjoc.16.214

• , gave the corresponding β-brominated thienothiophene 4 in 91% yield [6]. Compound 4 was selectively brominated in α-position by using NBS in DMF at room temperature to give dibrominated thienothiophene 5 in 92% yield which was coupled in a Negishi-type cross-coupling reaction with zincated 2,3

• the azide route. The synthesis started from the above mentioned brominated thieno[3,2-b]thiophene 3, which was coupled with zincated 2,3-dibromothiophene 6 in a Negishi-type cross-coupling reaction with Pd(dppf)Cl2 as catalyst to give thiophene-substituted thienothiophene 10 in 72% yield. In the next

• a Pd-catalyzed Stille-type cross-coupling with 2-bromo-3-nitrothiophene (15) to precursor 2-(3-nitrothien-2-yl)thieno[3,2-b]thiophene (16) in 64% yield. Cadogan cyclization of nitro derivative 16 with triethyl phosphite at reflux gave 4H-thieno[3,2-b]thieno[2’, 3’:4,5]thieno[2,3-d]pyrrole (H-SN4, 13

Synthesis of 4-substituted azopyridine-functionalized Ni(II)-porphyrins as molecular spin switches

• Jannis Ludwig,
• Tobias Moje,
• Fynn Röhricht and
• Rainer Herges

Beilstein J. Org. Chem. 2020, 16, 2589–2597, doi:10.3762/bjoc.16.210

• cleavage of the methyl 3-mercaptopropionate under the Suzuki conditions. Nevertheless, azopyridines 14, 18 and 20 were converted almost quantitatively to the corresponding cross-coupling products, while the yield with 21 to 1j is only 52%. The tert-butyl protection group on 1f was cleaved according to a

Palladium nanoparticles supported on chitin-based nanomaterials as heterogeneous catalysts for the Heck coupling reaction

• Tony Jin,
• Malickah Hicks,
• Davis Kurdyla,
• Sabahudin Hrapovic,
• Edmond Lam and
• Audrey Moores

Beilstein J. Org. Chem. 2020, 16, 2477–2483, doi:10.3762/bjoc.16.201

• benign conditions, outcompeting the use of other catalysts supported on biomass-based nanomaterials, including cellulose nanocrystals. These initial results show the potential for using chitinous nanomaterials as effective catalyst supports in cross-coupling reactions. Keywords: chitin; chitosan; Heck

• catalytic site in most cases [22], Pd(II) would be inactive towards oxidative addition of the electrophilic iodobenzene, leading to no product formation. Importantly, even if mild reducers were present to initiate the cycle and afford Pd(0), as is often the case in Pd cross coupling chemistry, the fact that

Recent developments in enantioselective photocatalysis

• Callum Prentice,
• James Morrisson,
• Andrew D. Smith and
• Eli Zysman-Colman

Beilstein J. Org. Chem. 2020, 16, 2363–2441, doi:10.3762/bjoc.16.197

Chan–Evans–Lam N1-(het)arylation and N1-alkеnylation of 4-fluoroalkylpyrimidin-2(1H)-ones

• Viktor M. Tkachuk,
• Oleh O. Lukianov,
• Mykhailo V. Vovk,
• Isabelle Gillaizeau and
• Volodymyr A. Sukach

Beilstein J. Org. Chem. 2020, 16, 2304–2313, doi:10.3762/bjoc.16.191

• products, in contrast to the 4-methyl and 4-unsubstituted substrates which do not undergo N1-arylation under similar reaction conditions. Keywords: C–N cross-coupling; Chan–Evans–Lam reaction; pyrimidin-2(1Н)-ones; fluoroalkyl group; boronic acids; Introduction The catalytic formation of C–N bonds in the

• uniquely advantageous means to perform C–N cross-coupling reactions [15][16][17]. The corresponding Ullmann-type reaction currently known as Chan–Evans–Lam (CEL) coupling is characterized by the combination of two nucleophilic reactants which implies that oxidative processes with atmospheric oxygen play a

• -arylation process. As evidenced by LCMS analysis, the reaction with 6-methyl-4-(trifluoromethyl)pyrimidin-2(1H)-one provided a mixture of three cross-coupling products (not separated), with a total yield of no more than 18%, which suggests a poor regioselectivity. Conclusion We have optimized the reaction

The B & B approach: Ball-milling conjugation of dextran with phenylboronic acid (PBA)-functionalized BODIPY

• Patrizia Andreozzi,
• Lorenza Tamberi,
• Elisamaria Tasca,
• Gina Elena Giacomazzo,
• Marta Martinez,
• Mirko Severi,
• Marco Marradi,
• Stefano Cicchi,
• Sergio Moya,
• Giacomo Biagiotti and
• Barbara Richichi

Beilstein J. Org. Chem. 2020, 16, 2272–2281, doi:10.3762/bjoc.16.188

• related esters are relevant synthetic building blocks widely employed as cross-coupling reagents [14] as well as protecting groups for polyols and diamines [15][16]. Moreover, the reversible covalent interaction of boronic acids with specifically oriented cis-1,2 and 1,3-diols has been successfully

Synthetic approaches to bowl-shaped π-conjugated sumanene and its congeners

• Shakeel Alvi and
• Rashid Ali

Beilstein J. Org. Chem. 2020, 16, 2212–2259, doi:10.3762/bjoc.16.186

• % yield. Next, the methyl substituents were introduced at the position of the carbonyl groups of 23 to generate the methyl-substituted olefin derivative 25 via alkenyl phosphates 24 by means of three-fold cross-coupling reaction with methylmagnesium iodide in THF. Finally, during the tandem ROM–RCM, they

• Suzuki–Miyaura cross-coupling reaction of bromosumanene 82 under microwave reaction conditions. Whereas another route involves the Ni-catalyzed aryl–aryl homo-coupling between the two molecules of iodosumanene 79 [51][52]. Moreover, the bissumanenyl 92, which is thought to be chiral because of the two

• , very few reports could be found for selective functionalization at the peripheral carbons because of difficulties arose during their synthesis. In this regard, Toda et al. in 2017 have successfully synthesized 2,3,5,6,8,9-hexaarylsumanene derivatives 95a–h utilizing a Suzuki–Miyaura cross-coupling

Azo-dimethylaminopyridine-functionalized Ni(II)-porphyrin as a photoswitchable nucleophilic catalyst

• Jannis Ludwig,
• Julian Helberg,
• Hendrik Zipse and
• Rainer Herges

Beilstein J. Org. Chem. 2020, 16, 2119–2126, doi:10.3762/bjoc.16.179

• the Suzuki cross-coupling reaction published for a similar system [30], decomposition products and only 25% yield were obtained. Optimization by lowering the reaction temperature increased the yield to 91% (Scheme 1). Switching properties of porphyrin 1 Preliminary investigations on the photochemical

Synergy between supported ionic liquid-like phases and immobilized palladium N-heterocyclic carbene–phosphine complexes for the Negishi reaction under flow conditions

• Edgar Peris,
• Raúl Porcar,
• María Macia,
• Jesús Alcázar,
• Eduardo García-Verdugo and
• Santiago V. Luis

Beilstein J. Org. Chem. 2020, 16, 1924–1935, doi:10.3762/bjoc.16.159

• cross-coupling; NHC complex; palladium; supported ionic liquid; Introduction N-heterocyclic carbenes (NHCs) are known as efficient coordination ligands for different types of metals. The main feature of NHC complexes is their structural tunability [1]. Thus, their catalytic efficiency can be easily

• modulated through systematic variations of the steric and electronic design vectors of the NHC ligand [2]. These complexes have been used as highly efficient catalysts for a wide variety of C–C and C–X cross-coupling reactions [3]. Among others, different NHC–Pd complexes have been designed as efficient

• pursuit of NHC immobilized metal complexes many different materials of organic and inorganic nature have been used as supports [5]. Several reports describe the synthesis of supported palladium–NHC complexes (Pd–NHC) and their application in cross-coupling reactions [8][9][10]. The main flaw of this type

Regiodivergent synthesis of functionalized pyrimidines and imidazoles through phenacyl azides in deep eutectic solvents

• Paola Vitale,
• Luciana Cicco,
• Ilaria Cellamare,
• Filippo M. Perna,
• Antonio Salomone and
• Vito Capriati

Beilstein J. Org. Chem. 2020, 16, 1915–1923, doi:10.3762/bjoc.16.158

• ], (c) carbon–sulfur bond-forming reactions [9], (d) directed ortho-metalation and nucleophilic acyl substitution strategies [10], (e) Pd-catalyzed aminocarbonylation of aryl iodides, Suzuki–Miyaura and Sonogashira cross-coupling reactions [11][12][13], (f) Cu-catalyzed C–N coupling reactions [14], and

• cross-coupling reactions. A 4-fluoro-substituted phenacyl chloride as well as a bromomethyl 2-naphthyl ketone proved to be competent substrates as well, thus furnishing the corresponding imidazoles 3i/3i' and 3j in 67–87% yield. Conversely, a phenacyl halide decorated with an additional phenyl group at

One-pot and metal-free synthesis of 3-arylated-4-nitrophenols via polyfunctionalized cyclohexanones from β-nitrostyrenes

• Haruyasu Asahara,
• Minami Hiraishi and
• Nagatoshi Nishiwaki

Beilstein J. Org. Chem. 2020, 16, 1830–1836, doi:10.3762/bjoc.16.150

• group hinder the electrophilic modification at the 3-position. Generally, the aryl group is introduced by a Suzuki–Miyaura cross-coupling reaction [4][5], for which 3-bromo-4-nitrophenol must be prepared by the nitration of 3-bromophenol [6][7]. An alternative approach is the nitration of 3-arylphenol

When metal-catalyzed C–H functionalization meets visible-light photocatalysis

• Lucas Guillemard and
• Joanna Wencel-Delord

Beilstein J. Org. Chem. 2020, 16, 1754–1804, doi:10.3762/bjoc.16.147

• rapidly expanding domain of organic synthesis [1][2][3][4][5][6][7][8][9][10][11][12][13][14]. Indeed, this approach tends in rendering the classical metal-catalyzed cross-coupling more environmentally friendly, as simple, non-prefunctionalized substrates could be used in the presence of a metallic

• catalysts and further cross-coupling-type reactivity provides a unique tool to solve this critical issue. Besides, dual catalytic systems enable also umpolung-type reactivity, thus promoting unique bond-forming reactions, inaccessible via standard approaches due to the polarity mismatch. Finally, the

• . Remarkably, the test reactions clearly indicated the low efficiency of this Ar–Ar cross-coupling in the absence of the photosensitizer and/or in the dark, while an unselective transformation took place when removing the Au catalyst. Under the optimized reaction conditions, this dual catalysis protocol was

Tuneable access to indole, indolone, and cinnoline derivatives from a common 1,4-diketone Michael acceptor

• Dalel El-Marrouki,
• Sabrina Touchet,
• Abderrahmen Abdelli,
• Hédi M’Rabet,
• Mohamed Lotfi Efrit and
• Philippe C. Gros

Beilstein J. Org. Chem. 2020, 16, 1722–1731, doi:10.3762/bjoc.16.144

• ][38][39] or triketones [10][13] and enaminones [40][41][42][43] as starting materials. For the synthesis of cinnoline derivatives, aryldiazenes and aryltriazenes are substrates of choice for transition-metal-catalyzed (Rh, Pd, Cu) cross-coupling reactions, followed by intramolecular cyclizations [44

Five-component, one-pot synthesis of an electroactive rotaxane comprising a bisferrocene macrocycle

• Natalie Lagesse,
• Luca Pisciottani,
• Maxime Douarre,
• Pascale Godard,
• Brice Kauffmann,
• Vicente Martí-Centelles and
• Nathan D. McClenaghan

Beilstein J. Org. Chem. 2020, 16, 1564–1571, doi:10.3762/bjoc.16.128

• , k, l, and m). Further evidence of the interlocked nature of rotaxane 1a could be obtained from the 1H,1H-ROESY NMR spectrum. Multiple through-space cross-coupling correlation between the thread and the macrocycle protons were observed between the mechanically-bonded macrocycle and the thread (Figure

Heterogeneous photocatalysis in flow chemical reactors

• Christopher G. Thomson,
• Ai-Lan Lee and
• Filipe Vilela

Beilstein J. Org. Chem. 2020, 16, 1495–1549, doi:10.3762/bjoc.16.125

Photocatalyzed syntheses of phenanthrenes and their aza-analogues. A review

• Alessandra Del Tito,
• Havall Othman Abdulla,
• Davide Ravelli,
• Stefano Protti and
• Maurizio Fagnoni

Beilstein J. Org. Chem. 2020, 16, 1476–1488, doi:10.3762/bjoc.16.123

• , among the others, the anionic ring-closure of 2-cyanobiaryls by using organometallic reagents [19][20], and an impressive number of transition-metal-catalyzed C(sp2)–C(sp2) cross-coupling processes [21][22][23]. In the last decade, however, photochemical reactions, especially those promoted by a

Disposable cartridge concept for the on-demand synthesis of turbo Grignards, Knochel–Hauser amides, and magnesium alkoxides

• Mateo Berton,
• Kevin Sheehan,
• Andrea Adamo and
• D. Tyler McQuade

Beilstein J. Org. Chem. 2020, 16, 1343–1356, doi:10.3762/bjoc.16.115

• of the corresponding Grignard intermediate in the presence of ZnCl2 and LiCl, which were subsequently used in Negishi cross-coupling reactions [41]. The most recent example, by the Löb group, reported a pilot plant reactor including a Mg replenish unit that allowed to generate phenylmagnesium bromide

Distinctive reactivity of N-benzylidene-[1,1'-biphenyl]-2-amines under photoredox conditions

• Shrikant D. Tambe,
• Kwan Hong Min,
• Naeem Iqbal and
• Eun Jin Cho

Beilstein J. Org. Chem. 2020, 16, 1335–1342, doi:10.3762/bjoc.16.114

• unprecedented reductive coupling of N-benzylidene-[1,1'-biphenyl]-2-amines with an aliphatic amine. The presence of a phenyl substituent in the aniline moiety of the substrate was critical for the reactivity. The reaction proceeded via radical–radical cross-coupling of α-amino radicals generated by proton

• derivatives (Scheme 2). First, the C–C cross-coupling process with Cy2NMe was explored, with variations of the benzylidene moiety. The reactions with both electron-donating (2b–2e) and electron-withdrawing substituents (2i–2m) proceeded well. Several functional groups, such as benzylic ones (2b and 2c

• -donating (2q and 2r) and electron-withdrawing (2s) substituents underwent the cross-coupling with excellent reactivities. We also tried the transformation with aliphatic amines other than Cy2NMe, such as TMEDA, TEA, and DIPEA. However, these reactions proceeded with a poor chemoselectivity and resulted in

Highly selective Diels–Alder and Heck arylation reactions in a divergent synthesis of isoindolo- and pyrrolo-fused polycyclic indoles from 2-formylpyrrole

• Carlos H. Escalante,
• Eder I. Martínez-Mora,
• Carlos Espinoza-Hicks,
• Alejandro A. Camacho-Dávila,
• Fernando R. Ramos-Morales,
• Francisco Delgado and
• Joaquín Tamariz

Beilstein J. Org. Chem. 2020, 16, 1320–1334, doi:10.3762/bjoc.16.113

• intramolecular Heck cross-coupling reaction of the octahydroindoles 9/10 to the pentacycles 11, the process was explored with the simple substrates 8c,d and 8g (Scheme 4). Thus, the Pd(0)-catalyzed cyclization of the latter vinylpyrroles with potassium acetate and using acetonitrile or dimethylacetamide (DMA) as

• the solvent at 100 °C afforded pyrrolo[2,1-a]isoindoles 18a–c in good yields. This annulation process was regioselective, showing a preference of the cross-coupling reaction with the C-5 pyrrolic position and not with the vinyl moiety, which would give the dihydropyrrolo[1,2-b]isoquinoline 19. A

• similar chemoselectivity has been previously observed, being explained as a consequence of the acidity of the C–H bond being cleaved [6][44]. Additional intramolecular cross-coupling reactions were carried out by utilizing dimethyl malonates 8k and 8l, which were prepared through the N-benzylation of 16c

Oxime radicals: generation, properties and application in organic synthesis

• Igor B. Krylov,
• Stanislav A. Paveliev,
• Alexander S. Budnikov and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2020, 16, 1234–1276, doi:10.3762/bjoc.16.107

• and benzyl, were tolerated (46i and 46j). The yield of the C–O cross-coupling products 46 increases with the rise in the stability of the corresponding oxime radicals. For example, in the row 46f–h the yield becomes higher with the increase of the steric effect of the alkyl substituents attached to

Photocatalysis with organic dyes: facile access to reactive intermediates for synthesis

• Stephanie G. E. Amos,
• Marion Garreau,
• Luca Buzzetti and
• Jerome Waser

Beilstein J. Org. Chem. 2020, 16, 1163–1187, doi:10.3762/bjoc.16.103

• tetrahydrofuran (8.1), giving access to the key C(sp3) radical. The nickel catalyst, after an oxidative addition with the aryl bromide 8.2 and intercepting the alkyl radical species, gave the radical cross-coupling product 8.3 upon a reductive elimination. Other diaryl ketone dyes, such as 9-fluorenone, have been

Palladium-catalyzed regio- and stereoselective synthesis of aryl and 3-indolyl-substituted 4-methylene-3,4-dihydroisoquinolin-1(2H)-ones

• Valeria Nori,
• Antonio Arcadi,
• Armando Carlone,
• Fabio Marinelli and
• Marco Chiarini

Beilstein J. Org. Chem. 2020, 16, 1084–1091, doi:10.3762/bjoc.16.95

• stereoselective Pd-catalyzed cascade reactions, consisting of the addition of in situ-generated arylpalladium complexes over a proximate carbon–carbon triple bond, followed by cross-coupling reactions, have been reported [26][27][28][29][30][31]. Our continuing interest in the palladium-catalyzed reactions of

• , widening in such a way the scope of the methodology and allowing challenging synthesis of indoles 6 bearing a 4-alkylidene-3,4-dihydroisoquinolin-1(2H)-one substituent (Scheme 1b). It is worth noting that an aerobic Pd/Cu-catalyzed cyclizative cross-coupling between 2-alkynylanilines and 2

• situ-generated arylpalladium iodide complex to the triple bond to give an (E)-vinylpalladium intermediate, which underwent cross-coupling with an arylboronic acid leading to the final product by reductive elimination, with the regeneration of the Pd(0) catalyst. Finally, we envisaged that the above

Copper-based fluorinated reagents for the synthesis of CF₂R-containing molecules (R ≠ F)

• Louise Ruyet and
• Tatiana Besset

Beilstein J. Org. Chem. 2020, 16, 1051–1065, doi:10.3762/bjoc.16.92

• 87% yield) was investigated (Scheme 8) [52]. Finally, the Poisson’s group developed a methodology for the Ullman cross-coupling reaction between the in situ-generated CuCF2PO(OEt)2 and aryl iodides containing a coordinating group (e.g., CO2CH3, COCH3, NO2), at the ortho-position of the halide [52

• (0)-mediated reductive cross-coupling reaction between the iodobenzene and various 2-bromo-1,1,2,2-tetrafluoroethyl derivatives (RCF2CF2Br) was developed presumably involving a RCF2CF2Cu species (Scheme 21) [76]. In 2015, Yagupolskii and co-workers investigated the synthesis of perfluoroalkylcopper

• . Synthesis of difluoromethylphosphonate-containing molecules using in situ-generated CuCF2PO(OEt)2 species by an Ullman cross-coupling. CG = coordinating group. Synthesis of (diethylphosphono)difluoromethylthiolated molecules using in situ-generated CuCF2PO(OEt)2 species. Phen: 1,10-phenanthroline. Access to