Natural dolomitic limestone-catalyzed synthesis of benzimidazoles, dihydropyrimidinones, and highly substituted pyridines under ultrasound irradiation

• Kumar Godugu,
• Venkata Divya Sri Yadala,
• Mohammad Khaja Mohinuddin Pinjari,
• Trivikram Reddy Gundala,
• Lakshmi Reddy Sanapareddy and
• Chinna Gangi Reddy Nallagondu

Beilstein J. Org. Chem. 2020, 16, 1881–1900, doi:10.3762/bjoc.16.156

• ) in different positions provided good to excellent isolated yields of the corresponding products 3b–g and 3j–o that ranged from 94 to 98% in a stipulated period of time, as specified in Table 5. Further, heteroaromatic aldehydes, such as furan-2-aldehyde (2p) and thiophene-2-aldehyde (2q) produced the

• 3-Br: 2s) underwent the reaction with ethyl acetoacetate (4) and urea (5) to form the corresponding products (7h–j) in good isolated yields that ranged from 93–96% (Table 6, entries 8–10). Heteroaromatic aldehydes, such as furan-2-aldehyde (2p) and thiophene-2-aldehyde (2q) showed a good reactivity

Synthesis and highly efficient light-induced rearrangements of diphenylmethylene(2-benzo[b]thienyl)fulgides and fulgimides

• Vladimir P. Rybalkin,
• Sofiya Yu. Zmeeva,
• Lidiya L. Popova,
• Valerii V. Tkachev,
• Andrey N. Utenyshev,
• Olga Yu. Karlutova,
• Alexander D. Dubonosov,
• Vladimir A. Bren,
• Sergey M. Aldoshin and
• Vladimir I. Minkin

Beilstein J. Org. Chem. 2020, 16, 1820–1829, doi:10.3762/bjoc.16.149

• -isomers and of products of the photoinduced rearrangement completed by 1,5-H shift reaction, 3a,4-dihydronaphtho[2,3-c]furans(pyrroles) C, were established based on the data of 1H and 13C NMR spectroscopy and X-ray diffraction studies. Keywords: benzo[b]thiophene; fulgide; fulgimide; photorearrangement

• investigation of their photoinduced rearrangements. Results and Discussion Fulgides 3E, 3Z, 7E and fulgimides 4E, 4Z, 8E were synthesized as shown in Scheme 2 and Scheme 3. The Stobbe condensation of dimethyl 2-(diphenylmethylene)succinate with 1-methoxy- and 1-chlorobenzo[b]thiophene-2-carbaldehydes was used

• fulgides 3Z and 3E are shown in Figure 1 and Figure 2. Fulgide 3Z possesses Z-configuration at the double bond С(4)=С(5). The 3-methoxy-2-benzo[b]thiophene moiety in 3Z is planar and is almost coplanar with the planar furan-2,5-dione fragment (the dihedral angle is equal to 3.9°). The phenyl rings are

Et₃N/DMSO-supported one-pot synthesis of highly fluorescent β-carboline-linked benzothiophenones via sulfur insertion and estimation of the photophysical properties

• Dharmender Singh,
• Vipin Kumar and
• Virender Singh

Beilstein J. Org. Chem. 2020, 16, 1740–1753, doi:10.3762/bjoc.16.146

• . The quantum yields were calculated based on Equation 1. where R means reference and S sample, respectively. Generally weak fluorescence emissions were observed for the thiophene-based chromophores due to a remarkable spin–orbit coupling which is originating from the heavy atom effect of sulfur [73][74

• gel (CHCl3/MeOH 95:5, v/v) to afford the analytically pure product 2bA as orange solid in 74% yield (two step yield). One-pot experimental procedure for the synthesis of methyl 1-(benzo[b]thiophene-2-carbonyl)-9H-pyrido[3,4-b]indole-3-carboxylate (6C). To a stirred suspension of Cs2CO3 (0.182 g, 0.560

Azidophosphonium salt-directed chemoselective synthesis of (E)/(Z)-cinnamyl-1H-triazoles and regiospecific access to bromomethylcoumarins from Morita–Baylis–Hillman adducts

• Soundararajan Karthikeyan,
• Radha Krishnan Shobana,
• Kamarajapurathu Raju Subimol,
• J. Helen Ratna Monica and
• Ayyanoth Karthik Krishna Kumar

Beilstein J. Org. Chem. 2020, 16, 1579–1587, doi:10.3762/bjoc.16.130

• reactions. We further extended the scope of this transformation to five-membered heterocyclic MBH adducts. To our delight, except pyrroles, the proposed methodology was amenable to MBH adducts of furan and thiophene (3n–q, 70–80%). The mechanistic pathway for the triazolation proceeded via a nucleophilic

NHC-catalyzed enantioselective synthesis of β-trifluoromethyl-β-hydroxyamides

• Alyn T. Davies,
• Mark D. Greenhalgh,
• Alexandra M. Z. Slawin and
• Andrew D. Smith

Beilstein J. Org. Chem. 2020, 16, 1572–1578, doi:10.3762/bjoc.16.129

• expected lower electrophilicity. A heterocyclic substituent could also be incorporated using this methodology, with thiophene-substituted β-trifluoromethyl-β-hydroxyamide 16 being produced in 80:20 dr, with purification giving 16 in 51% yield as a single diastereoisomer and 96:4 er. The substrate scope was

Photoredox-catalyzed silyldifluoromethylation of silyl enol ethers

• Vyacheslav I. Supranovich,
• Vitalij V. Levin and
• Alexander D. Dilman

Beilstein J. Org. Chem. 2020, 16, 1550–1553, doi:10.3762/bjoc.16.126

• -donating functional groups. Substrates containing pyridine, furan, and thiophene as heterocyclic fragments were also successfully converted into the corresponding alcohols 4. However, in the reaction of the enol ether derived from 2-acetyl-N-methylpyrrole, ketone 3p did not undergo reduction with sodium

Heterogeneous photocatalysis in flow chemical reactors

• Christopher G. Thomson,
• Ai-Lan Lee and
• Filipe Vilela

Beilstein J. Org. Chem. 2020, 16, 1495–1549, doi:10.3762/bjoc.16.125

Photocatalytic trifluoromethoxylation of arenes and heteroarenes in continuous-flow

• Alexander V. Nyuchev,
• Ting Wan,
• Borja Cendón,
• Carlo Sambiagio,
• Job J. C. Struijs,
• Michelle Ho,
• Moisés Gulías,
• Ying Wang and
• Timothy Noël

Beilstein J. Org. Chem. 2020, 16, 1305–1312, doi:10.3762/bjoc.16.111

• poor yields. Other synthetically useful substituents, including cyano, nitro, phenylsulphonyl, (pinacolato)boron, and alkyl groups could be tolerated in the reaction (24–30), leading to a yield range between 26 and 65%. The trifluoromethoxylation of pyridine, pyrimidine, and thiophene derivatives also

Photocatalysis with organic dyes: facile access to reactive intermediates for synthesis

• Stephanie G. E. Amos,
• Marion Garreau,
• Luca Buzzetti and
• Jerome Waser

Beilstein J. Org. Chem. 2020, 16, 1163–1187, doi:10.3762/bjoc.16.103

• the substrate 15.1 using dibenzothiophene S-oxide (DBTSO, 15.2). Then, under visible-light irradiation, 15.3 could be reduced with PHTH (OD16) to generate an aryl radical that could further be trapped by a heteroarene 15.4, such as pyrrole or thiophene, furnishing the arylation product 15.5. Acyl

A simple and easy to perform synthetic route to functionalized thienyl bicyclo[3.2.1]octadienes

• Dragana Vuk,
• Irena Škorić,
• Valentina Milašinović,
• Krešimir Molčanov and
• Željko Marinić

Beilstein J. Org. Chem. 2020, 16, 1092–1099, doi:10.3762/bjoc.16.96

• 54, 10000 Zagreb, Croatia NMR Centre, Ruđer Bošković Institute, Bijenička cesta 54, 10000 Zagreb, Croatia 10.3762/bjoc.16.96 Abstract In order to prepare novel polycyclic derivatives of bicyclo[3.2.1]octadiene systems fused with a thiophene ring, photochemical cyclization and aldol condensation

• reactions were carried out. The starting substrates were easily obtained by a Vilsmeier–Haack reaction of bicyclo[3.2.1]octadiene thiophene derivatives with dimethylformamide. From the obtained carbaldehydes, novel methyl, methoxy, and cyano-substituted styryl thienobenzobicyclo[3.2.1]octadiene derivatives

• [3.2.1]octadiene compound with an extended conjugation. Keywords: bicyclo[3.2.1]octadiene; photocyclization; thiophene; Vilsmeier–Haack reaction; Wittig reaction; Introduction The bicyclo[3.2.1]octane skeleton has become the subject of intensive research in recent years [1][2][3]. Its presence in

Copper-based fluorinated reagents for the synthesis of CF₂R-containing molecules (R ≠ F)

• Louise Ruyet and
• Tatiana Besset

Beilstein J. Org. Chem. 2020, 16, 1051–1065, doi:10.3762/bjoc.16.92

• oxazoles (17 examples, up to 87% yield) were difluoromethylated but a variety of other heteroarenes turned out to be suitable such as pyridine, imidazole, benzo[d]thiazole, benzo[b]thiophene, benzo[d]oxazole, thiazole and thiophene derivatives (Scheme 6). Copper-based CF2FG-containing reagents Besides the

Synthesis and properties of tetrathiafulvalenes bearing 6-aryl-1,4-dithiafulvenes

• Aya Yoshimura,
• Hitoshi Kimura,
• Kohei Kagawa,
• Mayuka Yoshioka,
• Toshiki Itou,
• Dhananjayan Vasu,
• Takashi Shirahata,
• Hideki Yorimitsu and
• Yohji Misaki

Beilstein J. Org. Chem. 2020, 16, 974–981, doi:10.3762/bjoc.16.86

• ][15][16]. Considerable efforts have been devoted to the development of peripherally benzene- or thiophene-substituted TTFs. As for peripherally benzene-functionalized TTFs, some synthetic approaches, crystal and electronic structures, electrochemical and optical properties, and the nature of radical

• ion complexes with DDQ or iodine were reported [17][18][19][20][21][22][23][24]. Peripherally thiophene-functionalized TTFs, as potential precursors to conducting polymers, and organic metals were also prepared and characterized [25][26][27][28][29]. To design more tempting molecules, the attachment

Recent applications of porphyrins as photocatalysts in organic synthesis: batch and continuous flow approaches

• Rodrigo Costa e Silva,
• Luely Oliveira da Silva,
• Aloisio de Andrade Bartolomeu,
• Timothy John Brocksom and
• Kleber Thiago de Oliveira

Beilstein J. Org. Chem. 2020, 16, 917–955, doi:10.3762/bjoc.16.83

• reported a metal-free photoarylation of five-membered heteroarenes with aryldiazonium salts and meso-arylated porphyrin derivatives as photoredox catalyst [11]. Compounds such as furan, thiophene, and N-Boc-pyrrole derivatives were obtained by this methodology in 29–81% yields (Scheme 3). The key-step of

• energies, as for example the thiaporphyrins that absorb beyond 650 nm [8][28]. Derksen and co-workers studied bond-cleavage reactions that can occur in biological microenvironments, using a light source with wavelengths frequently employed in photomedicine (650–850 nm) and thiophene-containing porphyrins

Reaction of indoles with aromatic fluoromethyl ketones: an efficient synthesis of trifluoromethyl(indolyl)phenylmethanols using K₂CO₃/n-Bu₄PBr in water

• Thanigaimalai Pillaiyar,
• Masoud Sedaghati and
• Gregor Schnakenburg

Beilstein J. Org. Chem. 2020, 16, 778–790, doi:10.3762/bjoc.16.71

• trifluoroacetophenones did not significantly influence the yield of the reaction. The trifluoromethyl ketones having electron-rich heteroaromatics such as 2-(trifluoroacetyl)furan (2g) and 2-(trifluoroacetyl)thiophene (2h) gave the desired products 3g (97%) and 3h (98%) in excellent yields. Next, the role of fluorine in

Copper-catalyzed O-alkenylation of phosphonates

• Nuria Vázquez-Galiñanes,
• Mariña Andón-Rodríguez,
• Patricia Gómez-Roibás and
• Martín Fañanás-Mastral

Beilstein J. Org. Chem. 2020, 16, 611–615, doi:10.3762/bjoc.16.56

• , although low conversion and yield were observed (Table 1, entry 1). A screening of copper complexes at a higher temperature (50 °C) revealed that CuTC (TC = thiophene-2-carboxylate) is the most efficient catalyst for this transformation (Table 1, entries 2–6). Finally, by using 2 equiv of 2a full

KOt-Bu-promoted selective ring-opening N-alkylation of 2-oxazolines to access 2-aminoethyl acetates and N-substituted thiazolidinones

• Qiao Lin,
• Shiling Zhang and
• Bin Li

Beilstein J. Org. Chem. 2020, 16, 492–501, doi:10.3762/bjoc.16.44

• proceeded well with heterocycle-containing chlorides such as 2-chloro-5-(chloromethyl)thiophene (4e), leading to 2-aminoethyl acetate product 3k in 66% yield which has potential as bifunctional monomer for polymerization. Furthermore, oxazole derivative 2,4,4-trimethyl-4,5-dihydrooxazole (2b) was also

• directly obtained without reaction of C≡N bond. Substrates with pyridyl and thiophene groups were also applied to the synthesis of the corresponding thiazolidine derivatives 5j and 5k in 77% and 50% yields, respectively. On the other hand, further transformation of the 2-aminoethyl acetate product 3a was

Recent advances in photocatalyzed reactions using well-defined copper(I) complexes

• Mingbing Zhong,
• Xavier Pannecoucke,
• Philippe Jubault and
• Thomas Poisson

Beilstein J. Org. Chem. 2020, 16, 451–481, doi:10.3762/bjoc.16.42

• ]. Under green light irradiation, a large panel of styrene derivatives was converted into the corresponding α-azidoketones in good to excellent yields. Interestingly, the reaction was extended to the heteroaromatic derivatives, such as thiophene or benzofuran and to β-substituted styrenes. The authors

Room-temperature Pd/Ag direct arylation enabled by a radical pathway

• Amy L. Mayhugh and
• Christine K. Luscombe

Beilstein J. Org. Chem. 2020, 16, 384–390, doi:10.3762/bjoc.16.36

• -temperature, Pd/Ag-catalyzed direct arylation systems are radical-mediated. This is in contrast to the commonly proposed two-electron mechanisms for direct arylation and appears to extend to other substrates such as benzo[b]thiophene and pentafluorobenzene. Keywords: direct arylation; indole; palladium

• mechanism has been recently supported by 13C and 2H KIE experiments for the arylation of benzo[b]thiophene, although at C3 [13]. In contrast to these pathways, the radical trap and dark experiments reported above indicate a hybrid Pd(I) radical species induced by visible light is involved in the catalytic

• iodobenzene. Moreover, other substrates such as benzo[b]thiophene and pentafluorobenzene appear to undergo a radical-mediated Pd/Ag room-temperature direct arylation. This is a useful insight for advancing the direct arylation knowledge base, and serves as inspiration for designing new polymerization systems

Formal preparation of regioregular and alternating thiophene–thiophene copolymers bearing different substituents

• Atsunori Mori,
• Keisuke Fujita,
• Chihiro Kubota,
• Toyoko Suzuki,
• Kentaro Okano,
• Takuya Matsumoto,
• Takashi Nishino and
• Masaki Horie

Beilstein J. Org. Chem. 2020, 16, 317–324, doi:10.3762/bjoc.16.31

• Rokkodai, Nada, Kobe 657-8501, Japan Department of Chemical Engineering, National Tsing Hua University, 101, Sec. 2, Kuang-Fu Road, Hsinchu 30013, Taiwan 10.3762/bjoc.16.31 Abstract Differently substituted thiophene–thiophene-alternating copolymers were formally synthesized employing a halo-bithiophene as

• to afford the regioregular polythiophene in which 2,5-dihalo-3-substituted thiophene 1 is employed as a monomer precursor, converting to the corresponding organometallic monomer by a halogen−magnesium exchange reaction with a Grignard reagent. The employment of 1 leading to polythiophene has been

• shown to proceed in a dehalogenative manner [3]. We have recently shown that the generation of the organometallic monomer species can alternatively also be achieved by deprotonation, using 2-halo-3-substituted thiophene 2 or 3 with a bulky magnesium amide Knochel–Hauser base (TMPMgCl⋅LiCl) [7], followed

A green, economical synthesis of β-ketonitriles and trifunctionalized building blocks from esters and lactones

• Daniel P. Pienaar,
• Kamogelo R. Butsi,
• Amanda L. Rousseau and
• Dean Brady

Beilstein J. Org. Chem. 2019, 15, 2930–2935, doi:10.3762/bjoc.15.287

• for the production of a commercially important pharmaceutical intermediate, thiophene-substituted β-ketonitrile precursor 18 of the antidepressant drug duloxetine (Cymbalta®) [21][22]. It was interesting to note that, although 38% of the thiophene product could be obtained using methyl tert-butyl

Synthesis of aryl-substituted thieno[3,2-b]thiophene derivatives and their use for N,S-heterotetracene construction

• Nadezhda S. Demina,
• Nikita A. Kazin,
• Nikolay A. Rasputin,
• Roman A. Irgashev and
• Gennady L. Rusinov

Beilstein J. Org. Chem. 2019, 15, 2678–2683, doi:10.3762/bjoc.15.261

• . N. Yeltsin, Mira St., 19, Ekaterinburg, 620002, Russia 10.3762/bjoc.15.261 Abstract Fiesselmann thiophene synthesis was applied for the convenient construction of thieno[3,2-b]thiophene derivatives. Thus, new 5- or 6-aryl-3-hydroxythieno[3,2-b]thiophene-2-carboxylates were obtained by condensation

• ketones were used to synthesize new N,S-heterotetracenes, namely 9H-thieno[2',3':4,5]thieno[3,2-b]indoles by their treatment with arylhydrazines in accordance with the Fischer indolization reaction. Keywords: Fiesselmann thiophene synthesis; Fischer indole synthesis; N,S-heteroacene; thieno[3,2-b

• ]thiophene; thieno[2',3':4,5]thieno[3,2-b]indole; Introduction The thieno[3,2-b]thiophene (TT) unit is highly demanded in modern organic synthesis since TT-based compounds have a variety of applications, e.g., in the field of organic electronics. Indeed, TT-based polymers and small molecules are used as

Combining the Ugi-azide multicomponent reaction and rhodium(III)-catalyzed annulation for the synthesis of tetrazole-isoquinolone/pyridone hybrids

• Gerardo M. Ojeda,
• Prabhat Ranjan,
• Pavel Fedoseev,
• Lisandra Amable,
• Upendra K. Sharma,
• Daniel G. Rivera and
• Erik V. Van der Eycken

Beilstein J. Org. Chem. 2019, 15, 2447–2457, doi:10.3762/bjoc.15.237

• isoquinolones is very wide and may be extended to the preparation of complex compounds having heterocyclic moieties such as pyridone, furan, thiophene and pyrrole, as well as the corresponding benzo-fused derivatives. The developed procedure is simple, reproducible and does not require inert conditions

• rings, such as furan, benzofuran, pyrrole, benzopyrrole, thiophene, benzothiophene and naphthalene were also successfully synthesized (5d–l) in moderate to very good yields. The exceptions were the cases of indolopyridone 5i and thiazolopyridone 5k, the latter one could not be obtained even after many

Photochromic diarylethene ligands featuring 2-(imidazol-2-yl)pyridine coordination site and their iron(II) complexes

• Andrey G. Lvov,
• Max Mörtel,
• Anton V. Yadykov,
• Frank W. Heinemann,
• Valerii Z. Shirinian and
• Marat M. Khusniyarov

Beilstein J. Org. Chem. 2019, 15, 2428–2437, doi:10.3762/bjoc.15.235

• good accordance with previous DFT calculations [37], the molecule shows exclusively antiparallel conformation [8] of the thiophene and imidazole groups of the photoactive diarylethene moiety, with the respective α-methyl groups pointing in different directions. The thiophene and imidazole rings are

• cyclohexenone moiety no longer forms the out-of-plane corner. Instead, the unsubstituted CH2 position twists out of the plane towards the thiophene moiety of another ligand 6. Long time precipitation of crystalline material resulted in a tetranuclear species [Fe2(H2B(pz)2)2Fe2(B(OMe)3(pz))2(6-H)2] (complex 9

Mono- and bithiophene-substituted diarylethene photoswitches with emissive open or closed forms

• A. Lennart Schleper,
• Mariano L. Bossi,
• Vladimir N. Belov and
• Stefan W. Hell

Beilstein J. Org. Chem. 2019, 15, 2344–2354, doi:10.3762/bjoc.15.227

• asymmetric DAEs with oxidized 2-ethylbenzo[b]thiophene-3-yl units have high cycloreversion quantum yields (a desirable feature for super-resolution RESOLFT microscopy), large Stokes shifts and acceptable absorptivity [5]. Yet unknown asymmetric “thiophenylated” DAEs may have unique properties

• . Oligothiophenes are highly fluorescent [6][7], and therefore, we reasoned that their incorporation into DAEs with oxidized 2-alkylbenzo[b]thiophene units might produce fluorescent open forms in addition to the intrinsic fluorescence of the closed forms. In particular, we expected that the prolonged conjugation

• ]thiophene core. The structures of “thiophenylated” DAEs AsTh1, AsTh2, SyTh1, SyTh2, AsOTh1, AsOTh2, SyOTh1, and SyOTh2 prepared and studied in this work are given in Figure 1. Methyl esters of the thiophene carboxylic acids were chosen as model building blocks, because they possess optical properties

Recent advances in transition-metal-catalyzed incorporation of fluorine-containing groups

• Xiaowei Li,
• Xiaolin Shi,
• Xiangqian Li and
• Dayong Shi

Beilstein J. Org. Chem. 2019, 15, 2213–2270, doi:10.3762/bjoc.15.218

• (Scheme 79). Also, phenyl, thiophene, and pyridine derivatives achieved regioselectively trifluoromethylation with N-pivalamide as a directing group. The authors also proposed a possible radical pathway for this reaction. The final trifluoromethylated compounds were generated from pivalamido arenes and