Layered calcium phenylphosphonate: a hybrid material for a new generation of nanofillers

• Kateřina Kopecká,
• Ludvík Beneš,
• Klára Melánová,
• Vítězslav Zima,
• Petr Knotek and
• Kateřina Zetková

Beilstein J. Nanotechnol. 2018, 9, 2906–2915, doi:10.3762/bjnano.9.269

• . The addition of the nanofiller was found to influence the composite properties – the exfoliated particles were found to have a higher impact on the properties of the prepared composites than the unexfoliated particles of the same loading Keywords: exfoliation; layered phenylphosphonate; nanomaterial

Nanostructure-induced performance degradation of WO₃·nH₂O for energy conversion and storage devices

• Zhenyin Hai,
• Mohammad Karbalaei Akbari,
• Zihan Wei,
• Danfeng Cui,
• Chenyang Xue,
• Hongyan Xu,
• Philippe M. Heynderickx,
• Francis Verpoort and
• Serge Zhuiykov

Beilstein J. Nanotechnol. 2018, 9, 2845–2854, doi:10.3762/bjnano.9.265

• their 3D counterparts. Herein, WO3·nH2O (n = 0, 1, 2), as the most common and important electrochemical and electrochromic active nanomaterial, is synthesized in 3D and 2D structures through a facile hydrothermal method, and the disadvantages of the corresponding 2D structures are examined. The weakness

Size-selected Fe₃O₄–Au hybrid nanoparticles for improved magnetism-based theranostics

• Maria V. Efremova,
• Yulia A. Nalench,
• Eirini Myrovali,
• Anastasiia S. Garanina,
• Ivan S. Grebennikov,
• Polina K. Gifer,
• Maxim A. Abakumov,
• Marina Spasova,
• Makis Angelakeris,
• Alexander G. Savchenko,
• Michael Farle,
• Natalia L. Klyachko,
• Alexander G. Majouga and
• Ulf Wiedwald

Beilstein J. Nanotechnol. 2018, 9, 2684–2699, doi:10.3762/bjnano.9.251

• diameters of 6–44 nm (Fe3O4) and 3–11 nm (Au) were prepared by high temperature, wet chemical synthesis. High-quality Fe3O4 nanocrystals with bulk-like magnetic behavior were obtained as confirmed by the presence of the Verwey transition. The 25 nm diameter Fe3O4–Au hybrid nanomaterial sample (in aqueous

Enhanced antineoplastic/therapeutic efficacy using 5-fluorouracil-loaded calcium phosphate nanoparticles

• Shanid Mohiyuddin,
• Saba Naqvi and
• Gopinath Packirisamy

Beilstein J. Nanotechnol. 2018, 9, 2499–2515, doi:10.3762/bjnano.9.233

• nanomaterial was found to be toxic in some metal-based NPs (e.g., gold, silver, iron, and copper), while the bulk counterparts showed less toxicity [9]. The metal ions present at the surface of the particles were found to interact with biomolecules at a comparatively higher rate in nanoformulations compared to

Nanocellulose: Recent advances and its prospects in environmental remediation

• Katrina Pui Yee Shak,
• Yean Ling Pang and
• Shee Keat Mah

Beilstein J. Nanotechnol. 2018, 9, 2479–2498, doi:10.3762/bjnano.9.232

• , flocculant, and membrane are reviewed in particular. However, additional effort will be required to implement and commercialize nanocellulose as a viable nanomaterial for remediation technologies. In this regard, the main challenges and limitations in working with nanocellulose-based materials are identified

• cellulose nanomaterial. Figure 1 illustrates the difference in length of CNF and CNC alongside with a few examples of microscopic images of nanocellulose derived from plants [25][26][27][28]. However, the Technical Association of the Pulp and Paper Industry (TAPPI) and multiple concerned bodies have

Droplet-based synthesis of homogeneous magnetic iron oxide nanoparticles

• Christian D. Ahrberg,
• Ji Wook Choi and
• Bong Geun Chung

Beilstein J. Nanotechnol. 2018, 9, 2413–2420, doi:10.3762/bjnano.9.226

• healthcare significantly [5]. For example, a composite nanomaterial has been developed as a photosensitizer in photothermal therapy (PTT), while also acting as a contrast agent for magnetic resonance imaging (MRI) [6]. Magnetic materials are of particular interest here, as they can be used for targeting [7

Surface energy of nanoparticles – influence of particle size and structure

• Dieter Vollath,
• Franz Dieter Fischer and
• David Holec

Beilstein J. Nanotechnol. 2018, 9, 2265–2276, doi:10.3762/bjnano.9.211

• may be recommended to use data for the bulk material when data for the equivalent nanomaterial is not available. Melting temperature of gold nanoparticles according to Castro et al. [11] and Cluskey et al. [13]. One realizes two ranges in the data of Castro et al.: Within the experimental error bar

Free-radical gases on two-dimensional transition-metal disulfides (XS₂, X = Mo/W): robust half-metallicity for efficient nitrogen oxide sensors

• Chunmei Zhang,
• Yalong Jiao,
• Fengxian Ma,
• Sri Kasi Matta,
• Steven Bottle and
• Aijun Du

Beilstein J. Nanotechnol. 2018, 9, 1641–1646, doi:10.3762/bjnano.9.156

• spin-unpaired electrons are localized on the NO and NO2 molecule (insets of Figure 2b,c,e,f) [30]. The concept of Fermi-level pinning is usually used in the metal–semiconductor interface region. Zhou et al. [28] Introduced the concept of Fermi-level pinning into the field of gas/2D nanomaterial systems

• . However, they failed to point out the spin-polarized Fermi-level pinning in gas/2D nanomaterial system. Based on this, we take the single-layer WS2 as an example to elucidate the different Fermi-level pinning processes of adsorption of NO and NO2. The spin orbital-resolved band structures are simulated

• (Figure 3) and the Fermi level of the adsorbed gas (NO and NO2)/WS2 nanomaterial system is pinned around the lowest unoccupied molecular orbital (LUMO) or highest occupied molecular orbital (HOMO) of the adsorbed gas molecules. The PDOS for WS2 with adsorbed NO indicates that the W and S atoms have no

The electrical conductivity of CNT/graphene composites: a new method for accelerating transmission function calculations

• Olga E. Glukhova and
• Dmitriy S. Shmygin

Beilstein J. Nanotechnol. 2018, 9, 1254–1262, doi:10.3762/bjnano.9.117

• single-walled carbon nanotubes (SWCNTs). One of the advantages of this material is its high strength and resistance to mechanical stress [2][3][4]. In combination with high electrical capacity and efficient electronic transfer between graphene sheets, this nanomaterial has already been recognized as

Review on nanoparticles and nanostructured materials: history, sources, toxicity and regulations

• Jaison Jeevanandam,
• Ahmed Barhoum,
• Yen S. Chan,
• Alain Dufresne and
• Michael K. Danquah

Beilstein J. Nanotechnol. 2018, 9, 1050–1074, doi:10.3762/bjnano.9.98

• reactions associated with NPs and NSMs and the regulations implemented by different countries to reduce the associated risks are also discussed. Keywords: nanomaterial classification; nanomaterial history; nanotoxicity; oxidative stress; reactive oxygen species; regulations; Review Introduction

• external nanoscale dimension or having internal nanoscale surface structure” [4]. Nanofibers, nanoplates, nanowires, quantum dots and other related terms have been defined based on this ISO definition [5]. Likewise, the term nanomaterial is described as “a manufactured or natural material that possesses

• on the nanoscale dimension by using scientific knowledge of various industrial and biomedical applications. Nanomaterial: Material with any internal or external structures on the nanoscale dimension. Nano-object: Material that possesses one or more peripheral nanoscale dimensions. Nanoparticle: Nano

Electro-optical interfacial effects on a graphene/π-conjugated organic semiconductor hybrid system

• Karolline A. S. Araujo,
• Luiz A. Cury,
• Matheus J. S. Matos,
• Thales F. D. Fernandes,
• Luiz G. Cançado and
• Bernardo R. A. Neves

Beilstein J. Nanotechnol. 2018, 9, 963–974, doi:10.3762/bjnano.9.90

• surface potential changes on the hybrid system. In summary, interface-induced organized structures atop 2D materials may have an important impact on both design and operation of π-conjugated nanomaterial-based hybrid systems. Keywords: DFT calculations; graphene; organic semiconductors; scanning probe

Surface-plasmon-enhanced ultraviolet emission of Au-decorated ZnO structures for gas sensing and photocatalytic devices

• T. Anh Thu Do,
• Truong Giang Ho,
• Thu Hoai Bui,
• Quang Ngan Pham,
• Hong Thai Giang,
• Thi Thu Do,
• Duc Van Nguyen and
• Dai Lam Tran

Beilstein J. Nanotechnol. 2018, 9, 771–779, doi:10.3762/bjnano.9.70

• precursors is higher, resulting in the core-spike architecture by minimizing the surface energy. It was found that the plasmonic metal nanomaterial/metal-oxide semiconductor structures were preferred as the nanometer-sized metal oxides for high photocatalytic activity and wide dispersion. However, in this

A review of carbon-based and non-carbon-based catalyst supports for the selective catalytic reduction of nitric oxide

• Shahreen Binti Izwan Anthonysamy,
• Syahidah Binti Afandi,
• Mehrnoush Khavarian and
• Abdul Rahman Bin Mohamed

Beilstein J. Nanotechnol. 2018, 9, 740–761, doi:10.3762/bjnano.9.68

Engineering of oriented carbon nanotubes in composite materials

• Razieh Beigmoradi,
• Abdolreza Samimi and
• Davod Mohebbi-Kalhori

Beilstein J. Nanotechnol. 2018, 9, 415–435, doi:10.3762/bjnano.9.41

• a high degree of orientation on a large scale. However, catalytic impurities are still the biggest challenge of this method [72]. Spray winding and layer-by-layer deposition Two of the latest controlled methods to produce composite polymer nanomaterial/CNTs are spray winding [73][74][75][76] and

Review: Electrostatically actuated nanobeam-based nanoelectromechanical switches – materials solutions and operational conditions

• Liga Jasulaneca,
• Jelena Kosmaca,
• Raimonds Meija,
• Jana Andzane and
• Donats Erts

Beilstein J. Nanotechnol. 2018, 9, 271–300, doi:10.3762/bjnano.9.29

• nanostructures (nanowires, nanotubes, nanorods, graphene) with a good uniformity and desired properties. The microfabrication routine may be supplemented with some bottom-up approaches. Dielectrophoresis [33], controlled nanomaterial growth [34], and nanomanipulation [9] have been demonstrated as useful methods

Dynamic behavior of a nematic liquid crystal with added carbon nanotubes in an electric field

• Emil Petrescu and
• Cristina Cirtoaje

Beilstein J. Nanotechnol. 2018, 9, 233–241, doi:10.3762/bjnano.9.25

• present a simplified theoretical model to explain the behavior of nematic liquid crystals with added carbon nanotubes in an external electric field. This model is in good agreement with our experimental results but also with other published studies. Thus, a proper characterization of these nanomaterial

Co-reductive fabrication of carbon nanodots with high quantum yield for bioimaging of bacteria

• Jiajun Wang,
• Xia Liu,
• Gesmi Milcovich,
• Tzu-Yu Chen,
• Edel Durack,
• Sarah Mallen,
• Yongming Ruan,
• Xuexiang Weng and
• Sarah P. Hudson

Beilstein J. Nanotechnol. 2018, 9, 137–145, doi:10.3762/bjnano.9.16

• and urea during the one-pot synthesis enhances the luminescence of the generated C-dots. Moreover, the prepared C-dots have a high distribution of functional groups on their surface. In this work, C-dots proved to be a suitable nanomaterial for imaging of bacteria and exhibit potential for application

Nematic liquid crystal alignment on subwavelength metal gratings

• Irina V. Kasyanova,
• Artur R. Geivandov,
• Vladimir V. Artemov,
• Maxim V. Gorkunov and
• Serguei P. Palto

Beilstein J. Nanotechnol. 2018, 9, 42–47, doi:10.3762/bjnano.9.6

• resonances which make such materials potentially useful in optical filters, biochemical sensors, light polarizers and other devices [3][4][5][6][7][8]. Because liquid crystals (LCs) allow for the control of such resonances using external electric and magnetic fields, the idea of combining a nanomaterial with

Facile synthesis of silver/silver thiocyanate (Ag@AgSCN) plasmonic nanostructures with enhanced photocatalytic performance

• Xinfu Zhao,
• Dairong Chen,
• Abdul Qayum,
• Bo Chen and
• Xiuling Jiao

Beilstein J. Nanotechnol. 2017, 8, 2781–2789, doi:10.3762/bjnano.8.277

• comparison, the pure AgSCN nanomaterial (labeled as M0) was also prepared using the same procedure as preparing AgSCN with a small amount of Ag except the addition of N2H4·H2O. Characterization The morphology and microstructure of the samples were characterized using a field-emission scanning electron

One-step chemical vapor deposition synthesis and supercapacitor performance of nitrogen-doped porous carbon–carbon nanotube hybrids

• Egor V. Lobiak,
• Lyubov G. Bulusheva,
• Ekaterina O. Fedorovskaya,
• Yury V. Shubin,
• Pavel E. Plyusnin,
• Pierre Lonchambon,
• Boris V. Senkovskiy,
• Zinfer R. Ismagilov,
• Emmanuel Flahaut and
• Alexander V. Okotrub

Beilstein J. Nanotechnol. 2017, 8, 2669–2679, doi:10.3762/bjnano.8.267

• with a "one pot" strategy seems the most practical way for the formation of the hybrid nanomaterial. The advantages of such a method are the reduction in the number of production steps and a natural and more homogeneous interconnection of the components. To the best of our knowledge, there are only few

• ranged from 0 to +1 V with a scan rate between 2 and 1000 mV s−1. The specific capacitance (C) of an electrode was determined with the formula C = A / (Vs × m), where A is the square of the positive curve, Vs is the scan rate and m is the mass of carbon nanomaterial. EIS measurements were performed on a

Robust nanobubble and nanodroplet segmentation in atomic force microscope images using the spherical Hough transform

• Yuliang Wang,
• Tongda Lu,
• Xiaolai Li,
• Shuai Ren and
• Shusheng Bi

Beilstein J. Nanotechnol. 2017, 8, 2572–2582, doi:10.3762/bjnano.8.257

• light harvesting [11], adsorb onto nanocrystal and microcrystal surfaces for direct heterogeneous engineering [12], and help functional oil deposition from emulsions [13]. NBs and NDs can also act as templates for nanomaterial engineering, such as assembling nanoparticles into nanorings [14], generating

Involvement of two uptake mechanisms of gold and iron oxide nanoparticles in a co-exposure scenario using mouse macrophages

• Dimitri Vanhecke,
• Dagmar A. Kuhn,
• Dorleta Jimenez de Aberasturi,
• Sandor Balog,
• Ana Milosevic,
• Dominic Urban,
• Diana Peckys,
• Niels de Jonge,
• Wolfgang J. Parak,
• Alke Petri-Fink and
• Barbara Rothen-Rutishauser

Beilstein J. Nanotechnol. 2017, 8, 2396–2409, doi:10.3762/bjnano.8.239

• negative, must be considered for nanotechnology and nanomedicine in particular to develop to its full potential. Keywords: co-exposure; endocytosis; live cell imaging; nanoparticles; quantitative microscopy; Introduction Over the past two decades, improvements in nanomaterial research were followed by a

• rise of nanotechnology-containing products [1]. Numerous contemporary developments in consumer products (e.g., food additives, cosmetics and sporting equipment), environmental remediation, medicine and information technology heavily rely on innovative nanomaterial-driven industrial technology [2]. A

Fabrication of carbon nanospheres by the pyrolysis of polyacrylonitrile–poly(methyl methacrylate) core–shell composite nanoparticles

• Dafu Wei,
• Youwei Zhang and
• Jinping Fu

Beilstein J. Nanotechnol. 2017, 8, 1897–1908, doi:10.3762/bjnano.8.190

• . Deionized water was used in all the synthesis processes. Preparation of PAN–PMMA latex Preparation of seed PAN nanolatex The seed PAN latex nanomaterial (nanolatex) was prepared via an AIBN-initiated semicontinuous emulsion polymerization method [39]. The typical process was as follows. 150 mg of AIBN, 400

Carbon nano-onions as fluorescent on/off modulated nanoprobes for diagnostics

• Stefania Lettieri,
• Marta d’Amora,
• Adalberto Camisasca,
• Alberto Diaspro and
• Silvia Giordani

Beilstein J. Nanotechnol. 2017, 8, 1878–1888, doi:10.3762/bjnano.8.188

• fluorescent CNOs is fast and reversible both in solution and in vitro, making this nanomaterial suitable as pH-dependent probes for diagnostic applications. Keywords: carbon nanomaterials; fluorescence; imaging; nanomedicine; nano-onion; Introduction Nanomaterial-based probes (nano-probes) that are able to

• intracellular pH change. HeLa cells treated with fluo-CNOs exhibited no fluorescence at neutral and basic environment (≥7.0) and a bright red fluorescence in acidic condition (≤5.0). The on/off process was fast and reversible, making this nanomaterial suitable as a pH-sensitive probe for diagnostic applications

Synthesis and functionalization of NaGdF₄:Yb,Er@NaGdF₄ core–shell nanoparticles for possible application as multimodal contrast agents

• Dovile Baziulyte-Paulaviciene,
• Vitalijus Karabanovas,
• Marius Stasys,
• Greta Jarockyte,
• Vilius Poderys,
• Simas Sakirzanovas and
• Ricardas Rotomskis

Beilstein J. Nanotechnol. 2017, 8, 1815–1824, doi:10.3762/bjnano.8.183

• uptake and cytotoxicity evaluation study showed that the UCNPs internalized into breast cancer cell lines and possessed low cytotoxicity and good biocompatibility. All these findings indicate that Tween 80-coated NaGdF4:Yb,Er@NaGdF4 UCNPs are a promising nanomaterial platform for imaging and detection in