Two-step continuous-flow synthesis of 6-membered cyclic iodonium salts via anodic oxidation

• Julian Spils,
• Thomas Wirth and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2023, 19, 27–32, doi:10.3762/bjoc.19.2

• Friedel–Crafts alkylation followed by an anodic oxidative cyclization yielded a defined set of cyclic iodonium salts in a highly substrate-dependent yield. Keywords: electrochemistry; flow chemistry; hypervalent compounds; iodine; oxidation; Introduction Hypervalent iodine compounds (HVI) are well

• electrochemistry is a highly economical tool that avoids chemical oxidants for synthesizing hypervalent iodine reagents [30]. Iodoarenes are suitable and well-established mediators in either in- or ex-cell electrochemical processes [31][32][33][34][35][36]. Nonetheless, HVIs, DIS and CDIS have been generated by

Combining the best of both worlds: radical-based divergent total synthesis

• Kyriaki Gennaiou,
• Antonios Kelesidis,
• Maria Kourgiantaki and
• Alexandros L. Zografos

Beilstein J. Org. Chem. 2023, 19, 1–26, doi:10.3762/bjoc.19.1

• reported the flow-controlled divergent synthesis of aporphine and morphinandienone alkaloids based on biomimetic common scaffolds (e.g., 180) using hypervalent iodine(III) reagents. Capitalizing on previously reported mechanistic investigations, they assumed that 180 can rearrange to glaucine (183) through

Redox-active molecules as organocatalysts for selective oxidative transformations – an unperceived organocatalysis field

• Elena R. Lopat’eva,
• Igor B. Krylov,
• Dmitry A. Lapshin and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2022, 18, 1672–1695, doi:10.3762/bjoc.18.179

• /peroxide, quinones, and iodine(I/III) compounds are the most developed catalyst types which are covered here. Keywords: CH-functionalization; free radicals; hypervalent iodine; N-oxyl radicals; redox-active molecules; Introduction Organocatalysis can be defined as catalysis by small organic molecules

• classified according to the catalytically active species or key intermediates: N-oxyl radicals, oxoammonium cations, amine cation radicals, thiyl radicals, quinones, dioxiranes and oxaziridines, hypervalent iodine compounds, etc. However, some examples of organocatalyzed oxidative processes, in which an

• the key factor for the high chemoselectivity. Hypervalent iodine catalysis Effective hypervalent iodine(III)-catalyzed processes (for example, oxidative double C=C bond functionalization, oxidative cyclizations, CH-functionalization of carbonyl compounds, etc.) employing mainly peroxoacids or electric

One-pot synthesis of 2-arylated and 2-alkylated benzoxazoles and benzimidazoles based on triphenylbismuth dichloride-promoted desulfurization of thioamides

• Arisu Koyanagi,
• Yuki Murata,
• Shiori Hayakawa,
• Mio Matsumura and
• Shuji Yasuike

Beilstein J. Org. Chem. 2022, 18, 1479–1487, doi:10.3762/bjoc.18.155

• cyclopropanes with arenes [29]. They have also been used in Pd-catalyzed cross-coupling reactions to react with hypervalent iodonium salts, organostananes, and vinyl epoxides [30][31][32]. Moreover, there are reports of them serving as oxidizing agents for alcohols [33]. Two papers have recently reported

Menadione: a platform and a target to valuable compounds synthesis

• Acácio S. de Souza,
• Ruan Carlos B. Ribeiro,
• Dora C. S. Costa,
• Fernanda P. Pauli,
• David R. Pinho,
• Matheus G. de Moraes,
• Fernando de C. da Silva,
• Luana da S. M. Forezi and
• Vitor F. Ferreira

Beilstein J. Org. Chem. 2022, 18, 381–419, doi:10.3762/bjoc.18.43

• published an alternative and sustainable methodology, using phenyliodine(III) bis(trifluoroacetate) (PIFA) as an oxidizing agent of the demethylation reaction [86]. The hypervalent iodine(III) proved to be a good oxidizing agent in the formation of 10 (92% yield) (Table 3, entry 2). According to the authors

Iron-catalyzed domino coupling reactions of π-systems

• Austin Pounder and
• William Tam

Beilstein J. Org. Chem. 2021, 17, 2848–2893, doi:10.3762/bjoc.17.196

The PIFA-initiated oxidative cyclization of 2-(3-butenyl)quinazolin-4(3H)-ones – an efficient approach to 1-(hydroxymethyl)-2,3-dihydropyrrolo[1,2-a]quinazolin-5(1H)-ones

• Alla I. Vaskevych,
• Nataliia O. Savinchuk,
• Ruslan I. Vaskevych,
• Eduard B. Rusanov,
• Oleksandr O. Grygorenko and
• Mykhailo V. Vovk

Beilstein J. Org. Chem. 2021, 17, 2787–2794, doi:10.3762/bjoc.17.189

• )-ones 7 upon action of bis(trifluoroacetoxy)iodobenzene (PIFA) (see Scheme 1D). A part from the well-known applications of hypervalent iodine compounds for oxidative rearrangements, fragmentations, halogenations and hydroxylations [37][38], they were also involved in the synthesis of N-heterocycles [39

Synthesis of highly substituted fluorenones via metal-free TBHP-promoted oxidative cyclization of 2-(aminomethyl)biphenyls. Application to the total synthesis of nobilone

• Ilya A. P. Jourjine,
• Lukas Zeisel,
• Jürgen Krauß and
• Franz Bracher

Beilstein J. Org. Chem. 2021, 17, 2668–2679, doi:10.3762/bjoc.17.181

• . Benzylamines and derivatives thereof have been described in literature to be susceptible to oxidation by diverse reagents (tritylium ion [40], silver [38] and cerium salts [41], peroxides [42][43][44] and persulfates [45], nitroxyls [46], hypervalent iodine compounds [39][47], or tetrahalomethanes [48]) to

Visible-light-mediated copper photocatalysis for organic syntheses

• Yajing Zhang,
• Qian Wang,
• Zongsheng Yan,
• Donglai Ma and
• Yuguang Zheng

Beilstein J. Org. Chem. 2021, 17, 2520–2542, doi:10.3762/bjoc.17.169

• )–O cross-coupling using oxime esters and phenols 76 (Scheme 30). In 2020, Loh and co-workers [104] reported the copper-catalyzed highly site-selective alkylation of heteroarene N-oxides in the presence of hypervalent iodineIII carboxylates. As an alkylating agent, the hypervalent iodineIII

A novel methodology for the efficient synthesis of 3-monohalooxindoles by acidolysis of 3-phosphate-substituted oxindoles with haloid acids

• Li Liu,
• Yue Li,
• Tiao Huang,
• Dulin Kong and
• Mingshu Wu

Beilstein J. Org. Chem. 2021, 17, 2321–2328, doi:10.3762/bjoc.17.150

• -workers reported controllable mono- and dichlorooxidation of indoles with hypervalent iodine species in DMF/CF3CO2H/H2O at room temperature, which generated 3,3-dichlorooxindoles and 3-monochlorooxindoles, respectively (Scheme 1, reaction 3) [23]. Apart from these methods, most traditional approaches to 3

On the application of 3d metals for C–H activation toward bioactive compounds: The key step for the synthesis of silver bullets

• Renato L. Carvalho,
• Amanda S. de Miranda,
• Mateus P. Nunes,
• Roberto S. Gomes,
• Guilherme A. M. Jardim and
• Eufrânio N. da Silva Júnior

Beilstein J. Org. Chem. 2021, 17, 1849–1938, doi:10.3762/bjoc.17.126

Cerium-photocatalyzed aerobic oxidation of benzylic alcohols to aldehydes and ketones

• Girish Suresh Yedase,
• Sumit Kumar,
• Jessica Stahl,
• Burkhard König and
• Veera Reddy Yatham

Beilstein J. Org. Chem. 2021, 17, 1727–1732, doi:10.3762/bjoc.17.121

• Br2, MnO2, hypervalent iodine reagents, chromium-based reagents, activated dimethyl sulfoxide, KMnO4, OsO4, or metal-based catalysts and peroxide were used [7][8][9][10][11][12][13][14][15][16][17]. Most of these protocols produce harmful waste and some of the oxidizing reagents are considered toxic

Synthesis of β-triazolylenones via metal-free desulfonylative alkylation of N-tosyl-1,2,3-triazoles

• Soumyaranjan Pati,
• Renata G. Almeida,
• Eufrânio N. da Silva Júnior and
• Irishi N. N. Namboothiri

Beilstein J. Org. Chem. 2021, 17, 762–770, doi:10.3762/bjoc.17.66

• functionalization of triazoles under metal-free conditions has been reported. These include the Broensted acid-catalysed N2 alkylation [27], organocatalytic N1 alkylation [28][29], N2-arylation using hypervalent iodine (Scheme 1c) [30], N2-alkylation involving radical intermediate [31], pyridine-N-oxide-mediated N1

CF₃-substituted carbocations: underexploited intermediates with great potential in modern synthetic chemistry

• Anthony J. Fernandes,
• Armen Panossian,
• Bastien Michelet,
• Agnès Martin-Mingot,
• Frédéric R. Leroux and
• Sébastien Thibaudeau

Beilstein J. Org. Chem. 2021, 17, 343–378, doi:10.3762/bjoc.17.32

All-carbon [3 + 2] cycloaddition in natural product synthesis

• Zhuo Wang and
• Junyang Liu

Beilstein J. Org. Chem. 2020, 16, 3015–3031, doi:10.3762/bjoc.16.251

• -workers in 2014 [49] (Scheme 9A). The synthesis began with the conversion of ketone 112 into alcohol 113 in four steps, which involved a hypervalent iodine-mediated ring expansion [60]. A two-step synthesis from 113 gave epoxide 114. Epoxide 114 was converted to the corresponding β-ketoester and

Vicinal difluorination as a C=C surrogate: an analog of piperine with enhanced solubility, photostability, and acetylcholinesterase inhibitory activity

• Yuvixza Lizarme-Salas,
• Alexandra Daryl Ariawan,
• Ranjala Ratnayake,
• Hendrik Luesch,
• Angela Finch and
• Luke Hunter

Beilstein J. Org. Chem. 2020, 16, 2663–2670, doi:10.3762/bjoc.16.216

• -workers have recently described a method for the one-step, diastereoselective 1,2-difluorination of alkenes, mediated by a hypervalent iodine catalyst [24]. The substrate scope of the Jacobsen method has certain constraints but their original report did include some examples of α,β-unsaturated amides, and

Synthesis of 4-substituted azopyridine-functionalized Ni(II)-porphyrins as molecular spin switches

• Jannis Ludwig,
• Tobias Moje,
• Fynn Röhricht and
• Rainer Herges

Beilstein J. Org. Chem. 2020, 16, 2589–2597, doi:10.3762/bjoc.16.210

• Oxone™ (Wegner et al. [19][20][21], Scheme 1). Isolation of 3 was achieved, however, a one pot approach including a subsequent Baeyer–Mills reaction to yield 10 is preferred. 1-Iodo-3-nitrosobenzene (6) cannot be prepared by oxidation of the corresponding aniline because hypervalent iodine is formed [22

The biomimetic synthesis of balsaminone A and ellagic acid via oxidative dimerization

• Sharna-kay Daley and
• Nadale Downer-Riley

Beilstein J. Org. Chem. 2020, 16, 2026–2031, doi:10.3762/bjoc.16.169

• establish high-yielding and selective oxidative coupling reactions, has afforded new and greener synthetic protocols for biaryls [5][6][7]. Several oxidants, such as the salts of Ag(I&II) [8], Ti(III&IV) [9], Mn(III) [10], Ce(IV) [11], Sn(IV) [12] and Fe(III) [13], as well as the hypervalent iodine reagents

• aqueous conditions to prevent complexation of the reagent and the starting material. Of the Lewis acids used, stannic chloride proved to be the most effective oxidant for dimerization (Table 1). However, the hypervalent iodine reagents PIFA and PIDA gave better results overall, affording dimer 18 in 63

Fluorohydration of alkynes via I(I)/I(III) catalysis

• Jessica Neufeld,
• Constantin G. Daniliuc and
• Ryan Gilmour

Beilstein J. Org. Chem. 2020, 16, 1627–1635, doi:10.3762/bjoc.16.135

• suppressed catalysis. The prerequisite for this substructure was established by molecular editing and was complemented with a physical organic investigation of possible determinants. Keywords: α-fluoroketone; alkyne; fluorination; hypervalent iodine; organocatalysis; Introduction The venerable role of

Copper-based fluorinated reagents for the synthesis of CF₂R-containing molecules (R ≠ F)

• Louise Ruyet and
• Tatiana Besset

Beilstein J. Org. Chem. 2020, 16, 1051–1065, doi:10.3762/bjoc.16.92

• Sandmeyer-type reaction (Scheme 7, reaction a) [49]. The reaction was efficient, although heteroaryl diazonium salts were reluctant in this reaction. To overcome these limitations, hypervalent iodinated species were used as substrates. The copper-mediated reaction with λ3-iodanes demonstrated a large

Copper-catalyzed O-alkenylation of phosphonates

• Nuria Vázquez-Galiñanes,
• Mariña Andón-Rodríguez,
• Patricia Gómez-Roibás and
• Martín Fañanás-Mastral

Beilstein J. Org. Chem. 2020, 16, 611–615, doi:10.3762/bjoc.16.56

• valuable enol phosphonates in very good yields. Keywords: alkenylation; copper; C(sp2)–O bond formation; hypervalent iodine; phosphonates; Introduction Organophosphorus compounds represent an important class of products with a wide range of applications in biology, agriculture and synthetic organic

• (alkenyl)iodonium salts, which are air- and moisture-stable, nontoxic and easy to prepare compounds, have become efficient reagents for mild and selective arylation and alkenylation reactions in organic synthesis [16][17][18]. In particular, the use of these hypervalent iodine reagents in copper catalysis

Construction of trisubstituted chromone skeletons carrying electron-withdrawing groups via PhIO-mediated dehydrogenation and its application to the synthesis of frutinone A

• Qiao Li,
• Chen Zhuang,
• Donghua Wang,
• Wei Zhang,
• Rongxuan Jia,
• Fengxia Sun,
• Yilin Zhang and
• Yunfei Du

Beilstein J. Org. Chem. 2019, 15, 2958–2965, doi:10.3762/bjoc.15.291

• high reaction temperature, extended reaction time, involvement of transition metal catalysts, and low yield. In these regards, the development of alternative approaches that can realize an efficient synthesis of chromones under mild conditions is desirable. In recent decades, hypervalent iodine

An improved, scalable synthesis of Notum inhibitor LP-922056 using 1-chloro-1,2-benziodoxol-3-one as a superior electrophilic chlorinating agent

• Nicky J. Willis,
• Elliott D. Bayle,
• George Papageorgiou,
• David Steadman,
• Benjamin N. Atkinson,
• William Mahy and
• Paul V. Fish

Beilstein J. Org. Chem. 2019, 15, 2790–2797, doi:10.3762/bjoc.15.271

• et al. described the electrophilic chlorination of arenes and heterocycles by 1-chloro-1,2-benziodoxol-3-one (12) [18][19]. The hypervalent iodine(III) reagent 12 is reported to be a mild and effective reagent for the chlorination of nitrogen containing heterocycles which is easy to prepare and is

Thermal stability of N-heterocycle-stabilized iodanes – a systematic investigation

• Andreas Boelke,
• Yulia A. Vlasenko,
• Mekhman S. Yusubov,
• Boris J. Nachtsheim and
• Pavel S. Postnikov

Beilstein J. Org. Chem. 2019, 15, 2311–2318, doi:10.3762/bjoc.15.223

• stability with reactivity in a model oxygenation. Keywords: differential scanning calorimetry; hypervalent iodine; N-heterocycle; stability; thermogravimetry; Introduction Hypervalent iodine compounds, in particular aryl-λ3-iodanes, have found wide spread applications as oxidants and electrophilic group

• transfer reagents in organic synthesis [1][2][3][4][5][6][7][8][9][10][11]. A 3-center 4-electron bond connects the central iodine atom, providing two electrons, with two carbon- or heteroatom ligands L1 and L2, providing one electron each (Figure 1). These ligands can be arranged along the hypervalent

• electrophilic hypervalent iodine atom in its ground state or directly influences its reactivity by stabilizing reactive intermediates or transition states. In recent years, a plethora of cyclic and pseudocyclic iodanes have been developed with covalently attached stabilizing ligands L2 and applied in a variety

Recent advances in transition-metal-catalyzed incorporation of fluorine-containing groups

• Xiaowei Li,
• Xiaolin Shi,
• Xiangqian Li and
• Dayong Shi

Beilstein J. Org. Chem. 2019, 15, 2213–2270, doi:10.3762/bjoc.15.218

• fluoride source and PhI(OPiv)2 as a hypervalent iodine oxidant (Scheme 8). Very recently, they [44] optimized this transformation and achieved the benzylic C–H radiofluorination with no-carrier-added Ag[18F]F. This method was applied to the radiolabeling of diversely substituted 8-methylquinoline