Electrocatalytic C(sp³)–H/C(sp)–H cross-coupling in continuous flow through TEMPO/copper relay catalysis

• Bin Guo and
• Hai-Chao Xu

Beilstein J. Org. Chem. 2021, 17, 2650–2656, doi:10.3762/bjoc.17.178

• the oxidation of the tetrahydroisoquinoline to an iminium intermediate with various chemical oxidants such as peroxides and DDQ followed by reaction with the copper acetylide species to deliver the 2-substituted tetrahydroisoquinoline product (Scheme 1A). These methods usually require elevated

• electrochemical microreactors can be a viable tool for developing efficient transition-metal electrocatalysis. C(sp3)–H alkynylation of tetrahydroisoquinolines. L* = chiral ligand. TEMPO = 2,2,6,6-tetramethylpiperidine 1-oxyl. DDQ = 2,3-dichloro-5,6-dicyano-1,4-benzoquinone. BPO = benzoyl peroxide. Substrate

Efficient synthesis of polyfunctionalized carbazoles and pyrrolo[3,4-c]carbazoles via domino Diels–Alder reaction

• Ren-Jie Fang,
• Chen Yan,
• Jing Sun,
• Ying Han and
• Chao-Guo Yan

Beilstein J. Org. Chem. 2021, 17, 2425–2432, doi:10.3762/bjoc.17.159

• diastereoisomers of tetrahydropyrrolo[3,4-c]carbazoles, which can be dehydrogenated by DDQ oxidation in acetonitrile at room temperature to give the aromatized pyrrolo[3,4-c]carbazoles in high yields. On the other hand, the one-pot reaction of 3-(indol-3-yl)-1,3-diphenylpropan-1-ones with chalcones or

• benzylideneacetone in acetonitrile in the presence of p-TsOH and DDQ resulted in polyfunctionalized carbazoles in satisfactory yields. The reaction mechanism included the DDQ oxidative dehydrogenation of 3-(indol-3-yl)-1,3-diphenylpropan-1-ones to the corresponding 3-vinylindoles, their acid-catalyzed Diels–Alder

• efficient domino reactions for the synthesis of biologically important carbazole derivatives [48][49][50][51][52][53], herein we wish to report the DDQ-mediated dehydrogenative Diels–Alder reaction of 3-(indol-3-yl)maleimides and benzoyl-substituted 3-ethylindoles with readily available chalcones for the

Strategies for the synthesis of brevipolides

• Yudhi D. Kurniawan and
• A'liyatur Rosyidah

Beilstein J. Org. Chem. 2021, 17, 2399–2416, doi:10.3762/bjoc.17.157

• using DDQ to form alcohol 40. At this point, the stereogenic center at the C6’ carbon required an inversion to match the target molecule. Thus, a standard Mitsunobu procedure followed by basic methanolysis were conducted. The desired inverted product 16, however, did not form. The authors hypothesized a

• -closing metathesis of this compound installed the 5,6-dihydro-α-pyrone moiety, and TBS removal followed by esterification with 4-methoxycinnamic acid provided compound 92. After removal of the PMB group using DDQ, the natural brevipolide H (8) was successfully achieved. Sabitha’s strategy to brevipolide M

• furnish the terminal epoxide 115 in 85% from 109. Then, the epoxide ring was opened with deprotonated propargylic ether 116. Global removal of the PMB functionality with DDQ gave triol 117. The partial reduction of the triple bond in 117 to the (Z)-olefin derivative was achieved using Lindlar catalyst and

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• corresponding cyclotrimerization products 18 or 19 (Scheme 4). The subsequent DDQ oxidation step yielded anthracenes 20 or azaanthracenes 21 in good yields (see the representative examples 20a–d and 21a–d) [38]. Recently, in a related approach, Bunz, Freudenberg, and co-workers described a useful route to

• products 24. Next, the key step was introducing chlorine, bromine, or iodine substituents by halodesilylation of 24. With the halogenated products 25 in hands, the authors employed DDQ in the oxidation/aromatization step, to obtain the di- and tetrahaloanthracenes 26 in good yields (61–85%) [39]. This

• 138. Then, an oxidative cyclization of 138 in the presence of FeCl3 afforded dibenzo[a,c]anthracenes 139a and 139b in moderate yields (58–68%). On the other hand, they obtained dibenzo[a,c]anthracenes 139c–e in low to moderate yields (15–54%) when they used DDQ/MeSO3H instead of FeCl3 [66]. In a study

Progress and challenges in the synthesis of sequence controlled polysaccharides

• Giulio Fittolani,
• Theodore Tyrikos-Ergas,
• Denisa Vargová,
• Manishkumar A. Chaube and
• Martina Delbianco

Beilstein J. Org. Chem. 2021, 17, 1981–2025, doi:10.3762/bjoc.17.129

On the application of 3d metals for C–H activation toward bioactive compounds: The key step for the synthesis of silver bullets

• Renato L. Carvalho,
• Amanda S. de Miranda,
• Mateus P. Nunes,
• Roberto S. Gomes,
• Guilherme A. M. Jardim and
• Eufrânio N. da Silva Júnior

Beilstein J. Org. Chem. 2021, 17, 1849–1938, doi:10.3762/bjoc.17.126

• and B) [145]. The authors successfully applied a manganese salt in catalytic amounts, allied with the use of an electrical current in combination with blue LED lights and an organic photocatalyst (DDQ), affording azidated alkyl moieties in excellent yields and chemoselectivity through alkyl C–H bonds

Cerium-photocatalyzed aerobic oxidation of benzylic alcohols to aldehydes and ketones

• Girish Suresh Yedase,
• Sumit Kumar,
• Jessica Stahl,
• Burkhard König and
• Veera Reddy Yatham

Beilstein J. Org. Chem. 2021, 17, 1727–1732, doi:10.3762/bjoc.17.121

• thermal conditions. Significant advances were made for the oxidation of benzylic alcohols by using metal-based photocatalysts [38][39][40][41][42][43][44][45][46] and metal-free photocatalysis [47][48][49][50][51][52][53] in combination with various oxidants, such as TBHP and DDQ [54][55]. However, the

Structural effects of meso-halogenation on porphyrins

• Keith J. Flanagan,
• Maximilian Paradiz Dominguez,
• Zoi Melissari,
• Hans-Georg Eckhardt,
• René M. Williams,
• Dáire Gibbons,
• Caroline Prior,
• Gemma M. Locke,
• Alina Meindl,
• Aoife A. Ryan and
• Mathias O. Senge

Beilstein J. Org. Chem. 2021, 17, 1149–1170, doi:10.3762/bjoc.17.88

• addition, the cold bath was removed and stirring was continued for an additional 45 min. Subsequently, pre-dried DDQ (291 mg, 1.28 mmol, 6.4 equiv) was added, resulting in a color change from green/brown to dark purple/brown. Stirring was continued for 1 h, and the solvent was removed under reduced

• atom during the study being DCM [56]. Another study suggests that the chlorinated product may be formed from a Cl radical generated during the reaction, although it was not stated if the origin of the radical was DCM or DDQ [57]. Here, it was shown that the source of Cl to yield the meso-chlorinated

• porphyrin was DDQ, given the absence of DCM. Investigations into why similar compounds as 4 were not frequently observed in previous research, and into the targeted synthesis of species 4 by DDQ are currently ongoing. Alternative methods to achieve the chloro derivatives of porphyrins have been reported by

N-tert-Butanesulfinyl imines in the asymmetric synthesis of nitrogen-containing heterocycles

• Joseane A. Mendes,
• Paulo R. R. Costa,
• Miguel Yus,
• Francisco Foubelo and
• Camilla D. Buarque

Beilstein J. Org. Chem. 2021, 17, 1096–1140, doi:10.3762/bjoc.17.86

Application of the Meerwein reaction of 1,4-benzoquinone to a metal-free synthesis of benzofuropyridine analogues

• Rashmi Singh,
• Tomas Horsten,
• Rashmi Prakash,
• Swapan Dey and
• Wim Dehaen

Beilstein J. Org. Chem. 2021, 17, 977–982, doi:10.3762/bjoc.17.79

• converted to novel oxazole-fused derivatives 19 and 20, respectively, by condensation with benzaldehyde and subsequent 2,3-dichloro-5.6-dicyano-p-benzoquinone (DDQ)-mediated oxidation (Scheme 3). Aldehyde building block 16 was a versatile starting material for further cyclization reactions. Synthesis of

Prins cyclization-mediated stereoselective synthesis of tetrahydropyrans and dihydropyrans: an inspection of twenty years

• Asha Budakoti,
• Pradip Kumar Mondal,
• Prachi Verma and
• Jagadish Khamrai

Beilstein J. Org. Chem. 2021, 17, 932–963, doi:10.3762/bjoc.17.77

• activation via DDQ oxidation, followed by nucleophilic attack of an unactivated olefin to obtain all-cis-trisubstituted Prins products with high stereochemical precision [111]. A single-electron transfer (SET) mechanism was proposed for the above transformation (Scheme 69). A SET from an arene or alkene to

• DDQ and the subsequent abstraction of hydride from the benzylic or allylic position generated a charge-transfer complex 298. The complex 298 formed a tin-containing ate oxocarbenium ion complex 299 with SnBr4, and then rapid C–C bond formation took place to generate the cyclic intermediate 300. The

• cyclopropane carbaldehydes and propargyl alcohol. Mullen and Gagné's (R)-[(tolBINAP)Pt(NC6F5)2][SbF6]2-catalyzed asymmetric Prins cyclization strategy to chromans. Yu and co-workers’ DDQ-catalyzed asymmetric Prins cyclization strategy to trisubstituted THPs. Lalli and Weghe’s chiral-Brønsted-acid- and achiral

Synthesis of dibenzosuberenone-based novel polycyclic π-conjugated dihydropyridazines, pyridazines and pyrroles

• Ramazan Koçak and
• Arif Daştan

Beilstein J. Org. Chem. 2021, 17, 719–729, doi:10.3762/bjoc.17.61

• mmol DDQ, 20 mL CH2Cl2, room temperature, 30 min. Proposed mechanism for the formation of 13. Synthesis of cycloadducts 3a–l. Some photophysical properties of cycloadducts 3c–3f and 3k. Supporting Information Supporting Information File 52: Experimental procedures, copies of 1H NMR, 13C NMR, and HRMS

Synthetic approaches to bowl-shaped π-conjugated sumanene and its congeners

• Shakeel Alvi and
• Rashid Ali

Beilstein J. Org. Chem. 2020, 16, 2212–2259, doi:10.3762/bjoc.16.186

• ′-tetramethylethylenediamine (TMEDA) as shown in the Scheme 1. Having the compound 4 in hand, it was subjected to the cyclization in the presence of boron trifluoride to provide the tricyclohexyl-fused benzene derivative which on further dehydrogenation with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) afforded 1,5,9

• accessible compound, namely norbornadiene (10) by involving oxidative aromatization in the presence of DDQ via an intermediate 17, as displayed in Scheme 2. As can be seen from an inspection of Scheme 2, they first performed a single step cyclotrimerization of 10 using n-BuLi and t-BuOK in 1,2-dibromoethane

• hexahydrosumanene 17 which on subsequent aromatization using DDQ furnished the desired molecule sumanene (2) in good yield. To their surprise, tandem metathesis for achieving compound 17 from 13 (anti) was fruitless may be because of the endothermic reaction by 37.4 kcal/mol as compared to the exothermic (51.4 kcal

Highly selective Diels–Alder and Heck arylation reactions in a divergent synthesis of isoindolo- and pyrrolo-fused polycyclic indoles from 2-formylpyrrole

• Carlos H. Escalante,
• Eder I. Martínez-Mora,
• Carlos Espinoza-Hicks,
• Alejandro A. Camacho-Dávila,
• Fernando R. Ramos-Morales,
• Francisco Delgado and
• Joaquín Tamariz

Beilstein J. Org. Chem. 2020, 16, 1320–1334, doi:10.3762/bjoc.16.113

• ). However, the use of 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) at 25 °C for 48 h led to the aromatized compound 21a in high yield (Table 4, entry 3). Under similar reaction conditions, the series of pyrrolo[3,4-e]indole-1,3-diones 21b–g was resulted in high yields (Table 4, entries 4 and 6–10

• using manganese oxide or DDQ as the oxidizing reagents, or even including Pd/C at high temperatures (250 °C) [45], failed to obtain the series of indoles 23. It is likely that the electron withdrawing effect of the formyl group at the C-7 position counterbalance the delocalization direction of the

• aromatization of pentacycles 11 was explored. Although the use of DDQ under the oxidative reaction conditions shown in Table 4 was efficient for the preparation of derivatives 21, the conversion of 11a into 12 was unsuccessful (Scheme 7). The action of active MnO2 in toluene at high temperature was able to

Oxime radicals: generation, properties and application in organic synthesis

• Igor B. Krylov,
• Stanislav A. Paveliev,
• Alexander S. Budnikov and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2020, 16, 1234–1276, doi:10.3762/bjoc.16.107

• quinazolinone 73a (Scheme 27) [118]. The method for oxidative cyclization of thiohydroximic acids 75 under the action of DDQ and p-TsOH with the formation of the corresponding 1,4,2-oxathiazoles 76 was developed (Scheme 28) [119]. The authors noted that reaction in the absence of p-TsOH proceeded with lower

• yield of 76. A radical mechanism was proposed in which the oxime moiety is oxidized by DDQ to the iminoxyl radical 77, which undergoes 1,5-HAT to give a C-centered radical 78 stabilized by a sulfur atom. 78 is oxidized by DDQ to a carbocation 79, followed by the closure of the oxathiazole ring (Scheme

•  29). Later, DDQ-mediated oxidative cyclization of amidoximes with the formation of 1,2,4-oxadiazoles (analogous transformation with K3PO4/O2 system was shown above in Scheme 26) was realized without the addition of TsOH [120]. Isoxazolines 82 were synthesized by a one-pot sequence, which included the

Synthesis and properties of tetrathiafulvalenes bearing 6-aryl-1,4-dithiafulvenes

• Aya Yoshimura,
• Hitoshi Kimura,
• Kohei Kagawa,
• Mayuka Yoshioka,
• Toshiki Itou,
• Dhananjayan Vasu,
• Takashi Shirahata,
• Hideki Yorimitsu and
• Yohji Misaki

Beilstein J. Org. Chem. 2020, 16, 974–981, doi:10.3762/bjoc.16.86

• ion complexes with DDQ or iodine were reported [17][18][19][20][21][22][23][24]. Peripherally thiophene-functionalized TTFs, as potential precursors to conducting polymers, and organic metals were also prepared and characterized [25][26][27][28][29]. To design more tempting molecules, the attachment

Direct borylation of terrylene and quaterrylene

• Haruka Kano,
• Keiji Uehara,
• Kyohei Matsuo,
• Hironobu Hayashi,
• Hiroko Yamada and
• Naoki Aratani

Beilstein J. Org. Chem. 2020, 16, 621–627, doi:10.3762/bjoc.16.58

• with AlCl3 reproducibly provided a pure terrylene [8]. Scholl reaction using a superacid catalyst in combination with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) as oxidant provides a scalable preparation of quaterrylene [9], but unfortunately the low solubility prevents 1H NMR characterization

• calculations showed a good agreement with the observed absorption spectra. Taking the successful result of the terrylene borylation, next we tried to perform the same reaction to quaterrylene (Scheme 2). The quaterrylene was prepared by the oxidative condensation reaction of perylene with TfOH and DDQ [9

Regioselectively α- and β-alkynylated BODIPY dyes via gold(I)-catalyzed direct C–H functionalization and their photophysical properties

• Takahide Shimada,
• Shigeki Mori,
• Masatoshi Ishida and
• Hiroyuki Furuta

Beilstein J. Org. Chem. 2020, 16, 587–595, doi:10.3762/bjoc.16.53

• mixture was treated with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) to give the α,α'-diethynyl-substituted dipyrrin 7a. Subsequent boron complexation in the presence of trimethylsilyl chloride (TMSCl) as a fluoride scavenger afforded 4a in 16% yield over three steps. Separately, α-ethynyl

Efficient synthesis of 3,6,13,16-tetrasubstituted-tetrabenzo[a,d,j,m]coronenes by selective C–H/C–O arylations of anthraquinone derivatives

• Seiya Terai,
• Yuki Sato,
• Takuya Kochi and
• Fumitoshi Kakiuchi

Beilstein J. Org. Chem. 2020, 16, 544–550, doi:10.3762/bjoc.16.51

• dehydrogenative cyclization using DDQ and FeCl3 (Scheme 2b) [44]. However, 3,6,13,16-tetrasubstituted tetrabenzo[a,d,j,m]coronenes have not been reported using these reported methods. Here, we describe a convenient method for the synthesis of 3,6,13,16-tetrasubstituted tetrabenzo[a,d,j,m]coronenes based on a

Synthesis of triphenylene-fused phosphole oxides via C–H functionalizations

• Md. Shafiqur Rahman and
• Naohiko Yoshikai

Beilstein J. Org. Chem. 2020, 16, 524–529, doi:10.3762/bjoc.16.48

• (trifluoroacetoxy)iodo]benzene] (PIFA) and BF3·OEt2 in dichloromethane at −78 °C afforded, after 12 h, the desired cyclized product 8a in 59% yield. The reaction could be performed on a 0.5 mmol scale in a similar yield of 58%. Note that other typical reagents used for the Scholl reaction, such as DDQ/CF3CO2H

Recent developments in photoredox-catalyzed remote ortho and para C–H bond functionalizations

• Rafia Siddiqui and
• Rashid Ali

Beilstein J. Org. Chem. 2020, 16, 248–280, doi:10.3762/bjoc.16.26

• of substituted phenols using QuCN. Synthesis of substituted phenols with DDQ (5). Aerobic bromination of arenes using an acridinium-based photocatalyst. Aerobic bromination of arenes with anthraquinone. Chlorination of benzene derivatives with Mes-Acr-MeClO4 (2). Chlorination of arenes with 4CzIPN

Synthesis of 3-alkenylindoles through regioselective C–H alkenylation of indoles by a ruthenium nanocatalyst

• Abhijit Paul,
• Debnath Chatterjee,
• Srirupa Banerjee and
• Somnath Yadav

Beilstein J. Org. Chem. 2020, 16, 140–148, doi:10.3762/bjoc.16.16

• purification [17][18]. As an example for the second category, Jiao and co-workers developed an organocatalytic C3–H alkenylation of indoles by the reaction of indoles with α,β-unsaturated aldehydes in presence of morpholin-4-ium trifluoroacetate as a catalyst and a stoichiometric amount of DDQ to achieve

Convenient synthesis of the pentasaccharide repeating unit corresponding to the cell wall O-antigen of Escherichia albertii O4

• Tapasi Manna,
• Arin Gucchait and
• Anup Kumar Misra

Beilstein J. Org. Chem. 2020, 16, 106–110, doi:10.3762/bjoc.16.12

• presence of tetrabutylammonium bromide (TBAB) followed by oxidative removal [33] of the PMB group using 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) to give trisaccharide acceptor 13 in 72% yield. Trisaccharide acceptor 13 was then allowed to couple with ʟ-rhamnosyl trichloroacetimidate donor 5 in the

• , THF, room temperature, 6 h; (c) DDQ, CH2Cl2/H2O (9:1), room temperature, 2 h, 72% in two steps; (d) HClO4/SiO2, CH2Cl2, −10 °C, 1 h, 76%; (e) 0.1 M CH3ONa, CH3OH, room temperature, 2 h, 94%; (f) NIS, HClO4/SiO2, MS 4 Å, CH2Cl2, –15 °C, 1 h, 70%; (g) CH3COSH, pyridine, room temperature, 16 h; (h

Construction of trisubstituted chromone skeletons carrying electron-withdrawing groups via PhIO-mediated dehydrogenation and its application to the synthesis of frutinone A

• Qiao Li,
• Chen Zhuang,
• Donghua Wang,
• Wei Zhang,
• Rongxuan Jia,
• Fengxia Sun,
• Yilin Zhang and
• Yunfei Du

Beilstein J. Org. Chem. 2019, 15, 2958–2965, doi:10.3762/bjoc.15.291

• also be realized by DDQ-mediated dehydrogenation of chromanones under heating in dioxane (Scheme 1b) [3][59][60]. In 2005, Yang and co-workers reported that chromones could be formed by microwave irradiation of the corresponding chromanone reactants and N-bromosuccinimide (NBS) in the presence of a

Chemical synthesis of the pentasaccharide repeating unit of the O-specific polysaccharide from Escherichia coli O132 in the form of its 2-aminoethyl glycoside

• Debasish Pal and
• Balaram Mukhopadhyay

Beilstein J. Org. Chem. 2019, 15, 2563–2568, doi:10.3762/bjoc.15.249

• -position of the donor led exclusively to the 1,2-cis glycoside [19]. Finally, the oxidative removal of the naphthyl group using DDQ [20] afforded the trisaccharide acceptor 11 in 83% yield (Scheme 2). The known galactofuranosyl derivative 12 [21] was prepared by following a literature procedure. It was