Mechanochemical halogenation of unsymmetrically substituted azobenzenes

• Dajana Barišić,
• Mario Pajić,
• Ivan Halasz,
• Darko Babić and
• Manda Ćurić

Beilstein J. Org. Chem. 2022, 18, 680–687, doi:10.3762/bjoc.18.69

• spectroscopy (Figures S40–S76 in Supporting Information File 1). All experiments were performed without additional oxidants and solid or liquid additives. The presence of the PdII-catalyst in the reactions of L2–5 with NXS resulted predominantly in LnX-I products or a mixture of products that were mono- or

Rapid gas–liquid reaction in flow. Continuous synthesis and production of cyclohexene oxide

• Kyoko Mandai,
• Tetsuya Yamamoto,
• Hiroki Mandai and
• Aiichiro Nagaki

Beilstein J. Org. Chem. 2022, 18, 660–668, doi:10.3762/bjoc.18.67

• system using oxidants other than air [28][29][30] encouraged us to develop a highly productive flow system with air. Herein, we report that rapid gas–liquid oxidation of cyclohexene with air in the presence of isobutyraldehyde as a sacrificial agent to synthesize cyclohexene oxide is successfully

• oxidation and decomposition of oxidants generated from air and aldehyde. Furthermore, the fast epoxidation is applicable for the continuous production process of cyclohexene oxide for 1 hour maintaining stable operation. Results and Discussion Batch experiment of epoxidation of cyclohexene with air As an

DDQ in mechanochemical C–N coupling reactions

• Shyamal Kanti Bera,
• Rosalin Bhanja and
• Prasenjit Mal

Beilstein J. Org. Chem. 2022, 18, 639–646, doi:10.3762/bjoc.18.64

• the other hand, increasing the amount of DDQ to 1.2 equiv resulted in 98% yield of the product (Supporting Information File 1, Table S1, entries 1 and 3). Further studies revealed that other commonly used oxidants such as PIDA and oxone gave 30% and 61% the desired product, respectively (Supporting

• Information File 1, Table S1, entries 4 and 5). When molecular iodine or NIS were used as oxidants, product 5a was obtained in 83% and 80% yield, respectively (Supporting Information File 1, Table S1, entries 6 and 7). However, the yield of the desired product 5a slightly decreased to 92% with lowering of the

Menadione: a platform and a target to valuable compounds synthesis

• Acácio S. de Souza,
• Ruan Carlos B. Ribeiro,
• Dora C. S. Costa,
• Fernanda P. Pauli,
• David R. Pinho,
• Matheus G. de Moraes,
• Fernando de C. da Silva,
• Luana da S. M. Forezi and
• Vitor F. Ferreira

Beilstein J. Org. Chem. 2022, 18, 381–419, doi:10.3762/bjoc.18.43

• menadione. Oxidation of 2-methylnaphthalene Menadione synthesis through the oxidation of 2-methylnaphthalene (16) includes the use of oxygen-rich oxidants using various reaction conditions and a broad range of well-succeeding methodologies has been reported. A summary is presented in Table 1 and will be

• one of the most studied and used oxidants has been H2O2. Yamaguchi and co-workers described the oxidation of 16 with aqueous H2O2 in the presence of a palladium(II)-polystyrene sulfonic acid resin (Table 1, entry 4) [50]. According to the authors, in the absence of the catalysts, the oxidation took

• heteropoly acids [71], molecular oxygen [72][73], and organic peroxides [74]. Matveev and co-workers studied phosphomolybdovanadium heteropoly acids of Keggin-type with the general structure H3+nPMo12-nVnO40 (HPA-n) and their acidic salts as reversibly acting oxidants to convert 17 to 10 (Table 2, entry 8

Flow synthesis of oxadiazoles coupled with sequential in-line extraction and chromatography

• Kian Donnelly and
• Marcus Baumann

Beilstein J. Org. Chem. 2022, 18, 232–239, doi:10.3762/bjoc.18.27

• iodine-mediated cyclisation with other oxidative conditions. A range of oxidants was investigated (Table 1), with only N-chlorosuccinimide (NCS) [34] and iodine resulting in the formation of product (entries 1 and 2, Table 1). As iodine yielded superior results, we opted to transfer this reaction from

• of complex oxadiazoles. Continuous flow scale-up reaction with in-line quench and extraction. Continuous flow setup equipped with in-line extraction and purification. Screening of oxidants for cyclisation of acyl hydrazone. Optimisation of iodine-mediated cyclisation in continuous flow mode

Recent advances and perspectives in ruthenium-catalyzed cyanation reactions

• Thaipparambil Aneeja,
• Cheriya Mukkolakkal Abdulla Afsina,
• Padinjare Veetil Saranya and
• Gopinathan Anilkumar

Beilstein J. Org. Chem. 2022, 18, 37–52, doi:10.3762/bjoc.18.4

• etc. Our studies disclosed that many of the reports were mainly focusing on the oxidative cyanation of tertiary amines. Extensive research was carried out in the cyanation of tertiary amines using different oxidants such as O2, H2O2, and TBHP. Ruthenium was also found to be effective in the cyanation

Iron-catalyzed domino coupling reactions of π-systems

• Austin Pounder and
• William Tam

Beilstein J. Org. Chem. 2021, 17, 2848–2893, doi:10.3762/bjoc.17.196

• ) [94]. Interestingly, the protocol used air as the oxidant, avoiding the use of stoichiometric oxidants like previous radical cyclization cascades. Generally, substrates with an electron-withdrawing group afforded the product in greater yield. The reaction proceeds through the formation of a sulfonyl

• 106 (Scheme 21) [104]. The use of Ag2CO3 as a SET oxidant was shown to be key for the success of the reaction, as typical organic oxidants, like peroxides, displayed low activity. No clear trend was observed for the difference in efficiency between the Fe catalysts used. It was noted the use of the Fe

• operate in the absence of any external oxidants under an inert atmosphere. Although not investigated, Loh’s transformation most likely begins with the generation of an aryl radical from the reduction of the diaryliodonium salt with Fe(II) which subsequently abstracts a hydrogen from CH2Cl2 to generate an

Synthesis of highly substituted fluorenones via metal-free TBHP-promoted oxidative cyclization of 2-(aminomethyl)biphenyls. Application to the total synthesis of nobilone

• Ilya A. P. Jourjine,
• Lukas Zeisel,
• Jürgen Krauß and
• Franz Bracher

Beilstein J. Org. Chem. 2021, 17, 2668–2679, doi:10.3762/bjoc.17.181

• group (Scheme 2) [33]. In contrast to transition-metal-mediated approaches [27], metal-free oxidative methods are attractive not only from an ecological point of view, but also due to the typically low cost of the applied oxidants. Biarylcarboxaldehydes were cyclized to fluorenones using K2S2O8 [34

• of oxidizing agents, oxidizing systems, and radical initiators on a set of model molecules 2 (see Table 1) in a preliminary screening for suitable oxidants for the intramolecular ring-closure reaction. The set of model molecules 2 bears different benzylic N-containing functional groups, including

Electrocatalytic C(sp³)–H/C(sp)–H cross-coupling in continuous flow through TEMPO/copper relay catalysis

• Bin Guo and
• Hai-Chao Xu

Beilstein J. Org. Chem. 2021, 17, 2650–2656, doi:10.3762/bjoc.17.178

• terminal alkynes has been achieved in a continuous-flow microreactor through 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO)/copper relay catalysis. The reaction is easily scalable and requires low concentration of supporting electrolyte and no external chemical oxidants or ligands, providing straightforward

• the oxidation of the tetrahydroisoquinoline to an iminium intermediate with various chemical oxidants such as peroxides and DDQ followed by reaction with the copper acetylide species to deliver the 2-substituted tetrahydroisoquinoline product (Scheme 1A). These methods usually require elevated

• temperatures [3][4][5], prompting the development of mild conditions by merging photoredox catalysis with copper catalysis (Scheme 1B) [8][9]. Notwithstanding of these outstanding achievements, noble metal-based catalysts and chemical oxidants are employed under these photochemical conditions. Organic

Visible-light-mediated copper photocatalysis for organic syntheses

• Yajing Zhang,
• Qian Wang,
• Zongsheng Yan,
• Donglai Ma and
• Yuguang Zheng

Beilstein J. Org. Chem. 2021, 17, 2520–2542, doi:10.3762/bjoc.17.169

• the copper-catalyzed oxidative coupling of alkynes, nucleophiles (e.g., phenols 25 and 28; amines 24, 27, 29, and 32; 2-hydrazinylpyridine 26; alkyne 33; and alcohol 30), and oxidants (benzoquinone or O2). Based on the literature and mechanistic experiments [72][73], the reaction is initiated by the

• photoirradiation of in situ-generated CuI phenylacetylide. From the excited state of CuI phenylacetylide an electron is transferred to the oxidants (benzoquinone or O2) via a SET, thereby forming a CuII phenylacetylide species and a radical anion. The resulting CuII phenylacetylide species is involved in the bond

Copper-catalyzed monoselective C–H amination of ferrocenes with alkylamines

• Zhen-Sheng Jia,
• Qiang Yue,
• Ya Li,
• Xue-Tao Xu,
• Kun Zhang and
• Bing-Feng Shi

Beilstein J. Org. Chem. 2021, 17, 2488–2495, doi:10.3762/bjoc.17.165

• of this environmentally benign, oxidative coupling strategy to the synthesis of valuable ortho-amino ferrocene derivatives hasn’t been achieved [50], probably ascribing to several challenges. First, unprotected amines are sensitive and unendurable to several oxidants in the presence of transition

• in MeCN, the yield could be improved to 32% (Table 1, entry 4). Further screening of other oxidants revealed that NMO was the optimal (Table 1, entries 9–11). When the reaction was conducted in neat in the presence of 2-pyridone, 3a was obtained in 36% yield (Table 1, entry 12). However, significant

A visible-light-induced, metal-free bis-arylation of 2,5-dichlorobenzoquinone

• Pieterjan Winant and
• Wim Dehaen

Beilstein J. Org. Chem. 2021, 17, 2315–2320, doi:10.3762/bjoc.17.149

• , resulting in a multitude of applications in dyes [11], molecular electronics [12], and oxidants or ligands in organic chemistry [13][14]. This wide range of applications has long fueled an interest in exploring innovative ways of functionalizing quinones. However, arylation of (benzo)quinones has proven to

Photoredox catalysis in nickel-catalyzed C–H functionalization

• Lusina Mantry,
• Rajaram Maayuri,
• Vikash Kumar and
• Parthasarathy Gandeepan

Beilstein J. Org. Chem. 2021, 17, 2209–2259, doi:10.3762/bjoc.17.143

• often requires relatively high catalyst loadings, directing groups, high reaction temperatures (100–160 °C), stoichiometric additives, or oxidants such as peroxide or silver salts that can be undesirable for large scale synthesis. Recently, photoredox dual catalysis has witnessed significant

• cycle (Figure 1), thereby facilitating redox-neutral transformations in the absence of stoichiometric oxidants/reductants. Given the tendency of nickel to mediate the reactions via Ni(0), Ni(I), Ni(II), and Ni(III) intermediates by both giving and accepting a single electron from a photocatalyst or

On the application of 3d metals for C–H activation toward bioactive compounds: The key step for the synthesis of silver bullets

• Renato L. Carvalho,
• Amanda S. de Miranda,
• Mateus P. Nunes,
• Roberto S. Gomes,
• Guilherme A. M. Jardim and
• Eufrânio N. da Silva Júnior

Beilstein J. Org. Chem. 2021, 17, 1849–1938, doi:10.3762/bjoc.17.126

• usually mediated by V(V) and V(IV)-oxo-peroxo complexes, which are produced in situ from vanadium-oxo and dioxo precatalysts in the presence of oxidants, such as H2O2, O2, and tert-butyl hydroperoxide (TBHP) [76][77][78][79][80][81][82]. Inorganic acids and chelating and non-chelating carboxylic acids

Cerium-photocatalyzed aerobic oxidation of benzylic alcohols to aldehydes and ketones

• Girish Suresh Yedase,
• Sumit Kumar,
• Jessica Stahl,
• Burkhard König and
• Veera Reddy Yatham

Beilstein J. Org. Chem. 2021, 17, 1727–1732, doi:10.3762/bjoc.17.121

• ; aldehydes; cerium; oxidation; ketones; visible light; Introduction The selective oxidation of alcohols to carbonyl compounds [1][2] is an important process for producing a wide range of value-added fine chemicals [3][4][5][6]. In the traditional oxidation process stoichiometric amounts of oxidants such as

• thermal conditions. Significant advances were made for the oxidation of benzylic alcohols by using metal-based photocatalysts [38][39][40][41][42][43][44][45][46] and metal-free photocatalysis [47][48][49][50][51][52][53] in combination with various oxidants, such as TBHP and DDQ [54][55]. However, the

Heterogeneous photocatalytic cyanomethylarylation of alkenes with acetonitrile: synthesis of diverse nitrogenous heterocyclic compounds

• Guanglong Pan,
• Qian Yang,
• Wentao Wang,
• Yurong Tang and
• Yunfei Cai

Beilstein J. Org. Chem. 2021, 17, 1171–1180, doi:10.3762/bjoc.17.89

• cyanomethylarylation of alkenes, most of them rely on the use of transition metals (such as catalytic amounts of Pd, Cu, Fe catalyst or stoichiometric amounts of Ag, Mn salts) and strong oxidants (including PhI(OPiv)2, DTBP, and t-BuONO) in the presence of various base additives under high reaction temperatures or

N-tert-Butanesulfinyl imines in the asymmetric synthesis of nitrogen-containing heterocycles

• Joseane A. Mendes,
• Paulo R. R. Costa,
• Miguel Yus,
• Francisco Foubelo and
• Camilla D. Buarque

Beilstein J. Org. Chem. 2021, 17, 1096–1140, doi:10.3762/bjoc.17.86

• , indicating a mismatch between the chiral auxiliary and the stereocenter in this substrate. Concerning the oxidative cyclization reaction, pyridinium dichromate (PDC) provided low yields of expected lactam 77. Many oxidants were checked for this transformation to take place, and the Sarett reagent [CrO3·(C5H5

Synthetic accesses to biguanide compounds

• Oleksandr Grytsai,
• Cyril Ronco and
• Rachid Benhida

Beilstein J. Org. Chem. 2021, 17, 1001–1040, doi:10.3762/bjoc.17.82

• presence of strong aqueous acids (>1 M) or alkali (>1 M), is required to observe an appreciable degradation accompanied in many cases by urea or biuret as the hydrolysis products. The compounds are also relatively resistant to many classical reducing and oxidizing agents [2]. However, very strong oxidants

Synthetic reactions driven by electron-donor–acceptor (EDA) complexes

• Zhonglie Yang,
• Yutong Liu,
• Kun Cao,
• Xiaobin Zhang,
• Hezhong Jiang and
• Jiahong Li

Beilstein J. Org. Chem. 2021, 17, 771–799, doi:10.3762/bjoc.17.67

• electrons from the electron-rich tertiary amine nitrogen atom to the electron-deficient benzene ring, achieving intramolecular electron transfer. Selective C–H-functionalization also includes no catalysts, oxidants, additives, acids and bases, which is of great significance in the synthesis and application

Designed whole-cell-catalysis-assisted synthesis of 9,11-secosterols

• Marek Kõllo,
• Marje Kasari,
• Villu Kasari,
• Tõnis Pehk,
• Ivar Järving,
• Margus Lopp,
• Arvi Jõers and
• Tõnis Kanger

Beilstein J. Org. Chem. 2021, 17, 581–588, doi:10.3762/bjoc.17.52

• toxic oxidants. Keywords: chemoenzymatic synthesis; cortisol; hydroxylation; secosterol; whole-cell catalysis; Introduction Developments in the chemistry of steroids have stimulated extensive research interest in the exploration of new synthetic methods since the 1960s. Advances in synthetic biology

• synthetic methods for secosteroids is wide. However, usually these are multistep sequences exploiting toxic oxidants. Marine invertebrates are a rich source of oxidated and highly functionalized steroidal metabolites, including secosteroids. Since the first isolation of 9,11-secosterol from

• ideal starting compound for this synthesis. Chemical oxidation methods for the synthesis of steroids often require stoichiometric amounts of toxic reagents, and the selectivity of the oxidation is still an unsolved problem [21]. Typically, toxic oxidants, such as OsO4, SeO2 and Pb(OAc)4 are used in this

A new and efficient methodology for olefin epoxidation catalyzed by supported cobalt nanoparticles

• Lucía Rossi-Fernández,
• Viviana Dorn and
• Gabriel Radivoy

Beilstein J. Org. Chem. 2021, 17, 519–526, doi:10.3762/bjoc.17.46

• been reported, efficient and selective epoxidation of olefins remains a challenge. Due to safety and environmental issues, traditional methods involving the use of stoichiometric amounts of harmful oxidants (for example, peroxosulfates [13] or organic peracids [14]) have been replaced by the use of

• greener oxidizing agents as molecular oxygen, hydrogen peroxide or tert-butyl hydroperoxide (TBHP) [14][15][16][17]. However, using any of these oxidants alone results in considerable low reactivity and selectivity in olefin epoxidation reactions. Thus, several transition-metal-based catalytic methods

• the oxidant agent. Among the reported methods that make use of peroxides as oxidants, cobalt nanoparticles supported on CNTs together with TBHP as oxidant for the epoxidation of styrene, gave good selectivity to styrene oxide but conversions were lower than 40% [41]. More recently, Hutchings et al

The preparation and properties of 1,1-difluorocyclopropane derivatives

• Kymbat S. Adekenova,
• Peter B. Wyatt and
• Sergazy M. Adekenov

Beilstein J. Org. Chem. 2021, 17, 245–272, doi:10.3762/bjoc.17.25

• and the subsequent aerobic oxidation by an amine. Single-electron oxidants such as cerium ammonium nitrate or K2S2O8 were used for the regiospecific ring opening of the simple gem-difluorocyclopropanes 134 (Scheme 58). The brominative ring-opening reactions of compounds 134 gave good yields of the

Facile preparation and conversion of 4,4,4-trifluorobut-2-yn-1-ones to aromatic and heteroaromatic compounds

• Takashi Yamazaki,
• Yoh Nakajima,
• Minato Iida and
• Tomoko Kawasaki-Takasuka

Beilstein J. Org. Chem. 2021, 17, 132–138, doi:10.3762/bjoc.17.14

• already reported procedure [4][19] as well as by the ones developed by other groups [22][23]. In spite of the previous unfavorable results for the oxidative transformation of 1a by MnO2 as well as other oxidants [18][23], MnO2 was selected due to the low cost and convenient handling. After a number of

Access to highly substituted oxazoles by the reaction of α-azidochalcone with potassium thiocyanate

• Mysore Bhyrappa Harisha,
• Pandi Dhanalakshmi,
• Rajendran Suresh,
• Raju Ranjith Kumar and
• Shanmugam Muthusubramanian

Beilstein J. Org. Chem. 2020, 16, 2108–2118, doi:10.3762/bjoc.16.178

• thiocyanate 2 in the presence of several oxidants and metal salts (Table 1). The initial attempts employing iodine, CAN and ZnCl2 upon refluxing in acetonitrile for 6 hours did not yield any product (Table 1, entries 1, 2 and 4). When potassium persulfate (K2S2O8) is employed, highly substituted oxazole 3i

The biomimetic synthesis of balsaminone A and ellagic acid via oxidative dimerization

• Sharna-kay Daley and
• Nadale Downer-Riley

Beilstein J. Org. Chem. 2020, 16, 2026–2031, doi:10.3762/bjoc.16.169

• establish high-yielding and selective oxidative coupling reactions, has afforded new and greener synthetic protocols for biaryls [5][6][7]. Several oxidants, such as the salts of Ag(I&II) [8], Ti(III&IV) [9], Mn(III) [10], Ce(IV) [11], Sn(IV) [12] and Fe(III) [13], as well as the hypervalent iodine reagents

• phenyliodine diacetate (PIDA) and phenyliodine bis(trifluoroacetate) (PIFA), have been utilized for oxidative dimerization reactions [14][15]. The use of these one-electron oxidants, as well as non-metallic reagents, plays an important role in accessing symmetrical and asymmetrical biaryls and polyaryls [1

• ), was subjected to the oxidants activated carbon (Act-C), potassium ferricyanide (K3[Fe(CN)6]), p-benzoquinone and stannic chloride (SnCl4). As shown in Scheme 4, with the exception of SnCl4, all oxidants resulted in the re-oxidation of the hydroxylated substrate to naphthoquinone 7. SnCl4, however