Synthesis of phenanthridines via a novel photochemically-mediated cyclization and application to the synthesis of triphaeridine

• Songeziwe Ntsimango,
• Kennedy J. Ngwira,
• Moira L. Bode and
• Charles B. de Koning

Beilstein J. Org. Chem. 2021, 17, 2340–2347, doi:10.3762/bjoc.17.152

• ], rhodium-mediated alkyne [2 + 2 + 2] cycloaddition reactions [3], and the palladium-catalysed aerobic domino Suzuki coupling/Michael addition reaction [4]. The most attractive and common strategies to phenanthridines rely on intramolecular cyclizations of various ortho-functionalized biaryl precursors

A visible-light-induced, metal-free bis-arylation of 2,5-dichlorobenzoquinone

• Pieterjan Winant and
• Wim Dehaen

Beilstein J. Org. Chem. 2021, 17, 2315–2320, doi:10.3762/bjoc.17.149

• multistep procedures requiring large amounts of toxic metal complexes [12][33][34]. Later improvements still demand prefunctionalization of the quinone substrate [35][36][37]. While effectively eliminating this requirement, CH bis-arylation using palladium complexes still suffers from regioselectivity

Photoredox catalysis in nickel-catalyzed C–H functionalization

• Lusina Mantry,
• Rajaram Maayuri,
• Vikash Kumar and
• Parthasarathy Gandeepan

Beilstein J. Org. Chem. 2021, 17, 2209–2259, doi:10.3762/bjoc.17.143

• a reliable strategy in modern organic synthesis. Palladium-catalyzed cross-coupling reactions such as Mizoroki–Heck [5][6][7][8], Suzuki–Miyaura [9][10][11], Buchwald–Hartwig [12][13], Negishi [14][15], Migita–Stille [16], Sonogashira [17], among others [18][19][20], significantly changed the design

• of synthetic routes for modern pharmaceuticals [21][22]. Over the past two decades, nickel has emerged as an attractive alternative to palladium due to its relative earth-abundance, less toxicity, and inexpensiveness. Despite the fact that the nickel-catalyzed cross-coupling reactions represent a

• . Conclusion During the last decade, metallaphotoredox catalysis has emerged as an increasingly viable tool in organic synthesis for C–H functionalization. Although significant advances have been achieved with precious palladium catalysts, recently, considerable attention has been devoted to using earth

Facile and innovative catalytic protocol for intramolecular Friedel–Crafts cyclization of Morita–Baylis–Hillman adducts: Synergistic combination of chiral (salen)chromium(III)/BF₃·OEt₂ catalysis

• Karthikeyan Soundararajan,
• Helen Ratna Monica Jeyarajan,
• Raju Subimol Kamarajapurathu and
• Karthik Krishna Kumar Ayyanoth

Beilstein J. Org. Chem. 2021, 17, 2186–2193, doi:10.3762/bjoc.17.140

• presence of a palladium catalyst from allylic acetates of MBH adducts. Recently Anas et al. [14] has reported the palladium-catalysed synthesis of indene from MBH adducts at 120 °C under N2 atmosphere. The methodologies referred in Scheme 1 access indenes either relying on harsh reaction conditions or on

Chemical syntheses and salient features of azulene-containing homo- and copolymers

• Vijayendra S. Shetti

Beilstein J. Org. Chem. 2021, 17, 2164–2185, doi:10.3762/bjoc.17.139

• -decyltetradecyl)-6,6’-di(thiophen-2-yl)-[2,2’-biazulene]-1,1’3,3’-tetracarboxdiimide (TBAzDI) 79 to make these polymers was synthesized as shown in the Scheme 16. The monomer 79 was reacted with N-dodecylthieno[3,4-c]pyrrole-4,6-dione (TPD, 80) and 1,2,4,5-tetrafluorobenzene (TFB, 82) via a palladium-catalyzed

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• anthracene derivatives 33. The strategy involved a palladium(II)-catalyzed tandem transformation with diphenyl carboxylic acids 31 and acrylates 32 (Scheme 7) [41]. This new methodology involved a carboxyl-directed C–H alkenylation, a carboxyl-directed secondary C–H activation, an intramolecular C–C-bond

• -workers reported a one-pot synthesis of substituted anthracenes 37 from o-tolualdehyde 34 and aryl iodides 35 via a palladium-catalyzed C–H arylation with a silver oxidant (Scheme 8) [42]. During optimization studies, the authors noted that steric and electronic effects strongly affected the cyclization

• activation In 2009, Liang et al. reported an efficient and highly regioselective route to construct substituted tetracyclic benz[a]anthracene derivatives 115 (Scheme 26) [60]. For this purpose, the authors developed an efficient palladium-catalyzed tandem C–H activation/bis-cyclization reaction of

Progress and challenges in the synthesis of sequence controlled polysaccharides

• Giulio Fittolani,
• Theodore Tyrikos-Ergas,
• Denisa Vargová,
• Manishkumar A. Chaube and
• Martina Delbianco

Beilstein J. Org. Chem. 2021, 17, 1981–2025, doi:10.3762/bjoc.17.129

• temperatures. Allyl groups provided a valid alternative and could be removed with palladium chloride at 60 °C in 4 hours [90]. Chemical synthesis grants full control over the polymer length, avoiding non-uniform dispersions of MW obtained by polymerization. Polymers with virtually any possible pattern of

Asymmetric organocatalyzed synthesis of coumarin derivatives

• Natália M. Moreira,
• Lorena S. R. Martelli and
• Arlene G. Corrêa

Beilstein J. Org. Chem. 2021, 17, 1952–1980, doi:10.3762/bjoc.17.128

• synthesis of biologically relevant coumarins in aqueous medium [21]. Catalysis is one of the fundamental pillars of green chemistry [22], and the transition-metal-catalyzed synthesis of coumarins has been reviewed by Sharma et al. [23]. More recently, Kanchana et al. published an account on the palladium

On the application of 3d metals for C–H activation toward bioactive compounds: The key step for the synthesis of silver bullets

• Renato L. Carvalho,
• Amanda S. de Miranda,
• Mateus P. Nunes,
• Roberto S. Gomes,
• Guilherme A. M. Jardim and
• Eufrânio N. da Silva Júnior

Beilstein J. Org. Chem. 2021, 17, 1849–1938, doi:10.3762/bjoc.17.126

• synthetic methodologies is the C–H bond activation process that enables a straightforward access to several important and innovative compounds [14][15][16][17][18]. In the last few years, metals such as ruthenium [19][20][21], rhodium [22][23][24], palladium [25][26][27], and iridium [28][29][30] have been

• , several products were submitted to a subsequent metathesis mediated by Grubbs-II catalyst and a further palladium-catalyzed C=C reduction and DG-removal process, from which the desired macrocyclic peptides were obtained in good to excellent yields (Scheme 35C). Recently, again Ackermann and co-workers

Development of N-F fluorinating agents and their fluorinations: Historical perspective

• Teruo Umemoto,
• Yuhao Yang and
• Gerald B. Hammond

Beilstein J. Org. Chem. 2021, 17, 1752–1813, doi:10.3762/bjoc.17.123

Sustainable manganese catalysis for late-stage C–H functionalization of bioactive structural motifs

• Jongwoo Son

Beilstein J. Org. Chem. 2021, 17, 1733–1751, doi:10.3762/bjoc.17.122

• selectivity, which is observed at the more electron-rich and the less sterically hindered position. Manganese-catalyzed late-stage C–H alkynylation Alkynes are invaluable intermediates in organic synthesis and are conventionally prepared via palladium-catalyzed cross-coupling reactions [62]. Moreover, they

2,4-Bis(arylethynyl)-9-chloro-5,6,7,8-tetrahydroacridines: synthesis and photophysical properties

• Najeh Tka,
• Mohamed Adnene Hadj Ayed,
• Mourad Ben Braiek,
• Mahjoub Jabli,
• Noureddine Chaaben,
• Kamel Alimi,
• Stefan Jopp and
• Peter Langer

Beilstein J. Org. Chem. 2021, 17, 1629–1640, doi:10.3762/bjoc.17.115

• molecules have been examined. Additionally, theoretical studies based on density functional theory (DFT/B3LYP/6-31G(d)) were carried out. Keywords: alkynes; catalysis; cross-coupling; heterocycles; palladium; Introduction The development and design of small π-conjugated molecules have attracted increasing

• using 0.6 mol % of tetrakis(triphenylphosphine)palladium(0) and 1.2 mol % of copper iodide (Scheme 2, Table 1). The reaction proceeded chemoselectively at the two carbon–bromine bonds giving 2,4-bis(phenylethynyl)-9-chloro-5,6,7,8-tetrahydroacridine (4a). This result was not entirely predictable, as the

A recent overview on the synthesis of 1,4,5-trisubstituted 1,2,3-triazoles

• Pezhman Shiri,
• Ali Mohammad Amani and
• Thomas Mayer-Gall

Beilstein J. Org. Chem. 2021, 17, 1600–1628, doi:10.3762/bjoc.17.114

• [58]. Postfunctionalization by Pd- or Pd/Cu-catalyzed synthesis of fully decorated triazoles A palladium-catalyzed aminocarbonylation reaction of 5-iodo-1,2,3-triazoles to give 1,4,5-trisubstituted 1,2,3-triazole-5-carboxamides 119 was introduced by Schwab et al. in 2019. The 5-iodo-1,2,3-triazole 117

• -triazole-based phenol or alcohol coordinates to the Pd center to form complex 158. Then, the electrophilic palladation of the 1,2,3-triazole ring occurs to achieve Pd(II) intermediate 159. Isocyanide migrates to 159 to obtain the seven‐ or eight‐membered palladium cycle 160. The reductive elimination of

• '. The isocyanide is inserted into intermediate 158' to achieve intermediate 159'. A 1,2,3-triazole C–H bond activation occurs using palladium, which subsequently undergoes a reductive elimination process to afford final product 154. Likewise, the Pd(0) species is reformed for the next cycle [64]. The

Methodologies for the synthesis of quaternary carbon centers via hydroalkylation of unactivated olefins: twenty years of advances

• Thiago S. Silva and
• Fernando Coelho

Beilstein J. Org. Chem. 2021, 17, 1565–1590, doi:10.3762/bjoc.17.112

• -substituted β-diketones 2a and 2b (61 and 70% yield, respectively). Notably, the unsaturated carbocycles expected from palladium β-hydride elimination were not observed, indicating that an oxidant was not required in the reaction medium to regenerate the Pd(II) species. Later, deuterium-labeling experiments

One-step synthesis of imidazoles from Asmic (anisylsulfanylmethyl isocyanide)

• Louis G. Mueller,
• Allen Chao,
• Embarek AlWedi and
• Fraser F. Fleming

Beilstein J. Org. Chem. 2021, 17, 1499–1502, doi:10.3762/bjoc.17.106

• to substituted imidazoles. Raney nickel hydrogenolysis was effective in interchanging the C4 anisylsulfanyl group for hydrogen (Scheme 3); attempted lithium–anisylsulfanyl exchange [19] or palladium- [22] or nickel- [23] anisylsulfanyl cross coupling was not successful. Raney nickel reduction of 7f

Double-headed nucleosides: Synthesis and applications

• Vineet Verma,
• Jyotirmoy Maity,
• Vipin K. Maikhuri,
• Ritika Sharma,
• Himal K. Ganguly and
• Ashok K. Prasad

Beilstein J. Org. Chem. 2021, 17, 1392–1439, doi:10.3762/bjoc.17.98

• . Global deprotection of 32 using palladium-catalyzed hydrogenation conditions resulted in the formation of the targeted double-headed nucleoside 33 (Scheme 8) [33]. The double-headed nucleoside 33 was dimethoxytritylated, phosphitylated, and incorporated into duplex and its ability to recognize

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

• of 1,2-aminoalcohol 110 (90% yield, anti/syn 7:3, 78% ee). At the end of the Henry reaction an in-line plug of silica gel removes the catalyst before the second reduction step to prevent issues of chelation and palladium deactivation. Knoevenagel condensations are also of considerable interest to the

Structural effects of meso-halogenation on porphyrins

• Keith J. Flanagan,
• Maximilian Paradiz Dominguez,
• Zoi Melissari,
• Hans-Georg Eckhardt,
• René M. Williams,
• Dáire Gibbons,
• Caroline Prior,
• Gemma M. Locke,
• Alina Meindl,
• Aoife A. Ryan and
• Mathias O. Senge

Beilstein J. Org. Chem. 2021, 17, 1149–1170, doi:10.3762/bjoc.17.88

• contribution for the palladium derivative 17. In the IP this is further demonstrated with a significant decrease in the A1g contribution of 17 giving the palladium derivative the lowest overall DIP contribution. This indicates that while there are minor differences within conformation of these porphyrins

N-tert-Butanesulfinyl imines in the asymmetric synthesis of nitrogen-containing heterocycles

• Joseane A. Mendes,
• Paulo R. R. Costa,
• Miguel Yus,
• Francisco Foubelo and
• Camilla D. Buarque

Beilstein J. Org. Chem. 2021, 17, 1096–1140, doi:10.3762/bjoc.17.86

• proceeded with high levels of diastereocontrol. The resulting sulfonamide derivatives 95 were transformed into the target spiro compound 97 by performing successive desulfinylation and intramolecular palladium-catalyzed N-arylation. To rationalize the stereochemical course of the addition, DFT calculations

• the Re face of the imine with S configuration at the sulfur atom, through a chelated transition state. The reaction of chiral aldimine (SS)-104b with pentylmagnesium bromide gave compound 106 in 75% yield. Further successive N-desulfinylation, intramolecular palladium-catalyzed N-arylation, and final

Synthesis of multiply fluorinated N-acetyl-D-glucosamine and D-galactosamine analogs via the corresponding deoxyfluorinated glucosazide and galactosazide phenyl thioglycosides

• Vojtěch Hamala,
• Lucie Červenková Šťastná,
• Martin Kurfiřt,
• Petra Cuřínová,
• Martin Dračínský and
• Jindřich Karban

Beilstein J. Org. Chem. 2021, 17, 1086–1095, doi:10.3762/bjoc.17.85

• configuration. Thioglycosides 22–31, 34 and 36 were then hydrolyzed into the corresponding hemiacetals 37–48 using treatment with NBS in acetone/water (Scheme 4). To obtain the target fluoro analogs, the hemiacetals 37–48 were debenzylated and their azide group converted to an acetamide. Although palladium

• degree upon reaction with AcSH in pyridine and traces of O1 acetates were removed by chromatography or recrystallization. Palladium-catalyzed hydrogenolytic debenzylation of 49–58 then yielded the target fluoro analogs 61–70. To complete the series of fluorinated analogs for the purpose of comparing

Recent advances in palladium-catalysed asymmetric 1,4–additions of arylboronic acids to conjugated enones and chromones

• Jan Bartáček,
• Jan Svoboda,
• Martin Kocúrik,
• Jaroslav Pochobradský,
• Alexander Čegan,
• Miloš Sedlák and
• Jiří Váňa

Beilstein J. Org. Chem. 2021, 17, 1048–1085, doi:10.3762/bjoc.17.84

• Sciences, Faculty of Chemical Technology, University of Pardubice, Studentská 573, 532 10 Pardubice, Czech Republic 10.3762/bjoc.17.84 Abstract The transition metal (palladium)-catalysed asymmetric 1,4-addition of arylboronic acids to conjugated enones belong to the most important and emerging strategies

• reaction, however, palladium holds a special place in this area. There are several review articles partially covering this topic [25][26][27][28][29][30][31]. However, a comprehensive review is missing. In the following sections, we attempt to fill this gap. As a sorting criterion, the type of ligand

• with excellent yields and enantioselectivities (89–92%; 91–99% ee; Scheme 5) [8]. In 2007, the group of Ito described the application of ferrocenylphosphines for the palladium-catalysed addition of arylboronic acids to 2-cyclohexenone at various temperatures giving the products with high conversions

Manganese/bipyridine-catalyzed non-directed C(sp³)–H bromination using NBS and TMSN₃

• Kumar Sneh,
• Takeru Torigoe and
• Yoichiro Kuninobu

Beilstein J. Org. Chem. 2021, 17, 885–890, doi:10.3762/bjoc.17.74

• -position of an oxazoline or amide is selectively activated using a copper or palladium catalyst. Manganese is one of the most abundant and nontoxic transition metals found in the earth’s crust and its corresponding complexes and salts are useful in synthetic organic reactions [29][30][31][32][33][34][35

β-Lactamase inhibition profile of new amidine-substituted diazabicyclooctanes

• Zafar Iqbal,
• Lijuan Zhai,
• Yuanyu Gao,
• Dong Tang,
• Xueqin Ma,
• Jinbo Ji,
• Jian Sun,
• Jingwen Ji,
• Yuanbai Liu,
• Rui Jiang,
• Yangxiu Mu,
• Lili He,
• Haikang Yang and
• Zhixiang Yang

Beilstein J. Org. Chem. 2021, 17, 711–718, doi:10.3762/bjoc.17.60

• -dimethylaminopyridine (DMAP) as the base. Then, the palladium-catalyzed hydrogenation of compounds B1–21 in THF or EtOAc led to the hydroxy derivatives C1–21. It has been observed that a catalytic amount of triethylamine (TEA) in EtOAc enhances the rate of the hydrogenolysis of benzyl ethers. Compounds C1–21 were then

[2 + 1] Cycloaddition reactions of fullerene C₆₀ based on diazo compounds

• Yuliya N. Biglova

Beilstein J. Org. Chem. 2021, 17, 630–670, doi:10.3762/bjoc.17.55

• illustrated in Scheme 20 [105]. A methanofullerene variety 69 with a pincer ligand containing a disulfidoaryl moiety was synthesized from 3,5-bis(phenylsulfidomethyl)benzaldehyde hydrazone. In the presence of [Pd(CH3CN)4](BF4)2, the latter gives the corresponding palladium complex 70 (Scheme 21) [106]. A

• nitrophenylfullerenes 48 and 50. Synthesis of conjugate 52 of C60 with ethyl diazo(4-nitrophenyl)acetate. Synthesis of fluoride-containing phenylmethanofullerenes 53–56. Synthesis of “bucky ligands” 57–60. The synthetic route to methanofullerene-based palladium–bisaminoaryl complex 62. Synthesis of N-containing

• fullerene ligands 66–68. Synthesis of C60-attached SCS pincer–palladium(II) complex 70. Synthesis of spiro-linked C-glycosides of fullerenes 71 and 72. Synthesis of quinone-substituted methanofullerene derivatives 76–78. Synthesis of spiroannelated methanofullerenes 79–81. The synthetic route for

Amino- and polyaminophthalazin-1(2H)-ones: synthesis, coordination properties, and biological activity

• Zbigniew Malinowski,
• Emilia Fornal,
• Agata Sumara,
• Renata Kontek,
• Karol Bukowski,
• Beata Pasternak,
• Dariusz Sroczyński,
• Joachim Kusz,
• Magdalena Małecka and
• Monika Nowak

Beilstein J. Org. Chem. 2021, 17, 558–568, doi:10.3762/bjoc.17.50

• Group, Faculty of Chemistry, University of Lodz, Pomorska 163/165, 90-236 Łódź, Poland 10.3762/bjoc.17.50 Abstract Amino- and polyaminophthalazinones were synthesized by the palladium‐catalyzed amination (alkyl- and arylamines, polyamines) of 4-bromophthalazinones in good yields. The coordinating

• quinazolinones [30][31] and taking into consideration the biological importance of aminophthalazine derivatives, we decided to apply the methodology based on the palladium-catalyzed C–N-bond formation (Buchwald–Hartwig-type reaction) as a convenient and effective approach for the synthesis of the new

• -bromobenzoate via palladium-catalyzed isocyanide insertion [32][33] (a method that is limited to tertiary-substituted isocyanides) or 2) the palladium or copper-catalyzed coupling of bromolactams with amines (a method that requires the usually lengthy synthesis of the bromoprecursors) [19][34]. Therefore, the