Photoredox catalysis harvesting multiple photon or electrochemical energies

• Mattia Lepori,
• Simon Schmid and
• Joshua P. Barham

Beilstein J. Org. Chem. 2023, 19, 1055–1145, doi:10.3762/bjoc.19.81

• direct application of commercially available potassium (poly)sulfide (K2Sx) with H2O, the top-down generation from elemental sulfur (S8) with sodium tert-butoxide (NaOt-Bu), and the bottom-up generation from lithium sulfide (Li2S) or triisopropylsilanethiol (iPr3SiSH) were all suitable methods of

Synthesis of aliphatic nitriles from cyclobutanone oxime mediated by sulfuryl fluoride (SO₂F₂)

• Xian-Lin Chen and
• Hua-Li Qin

Beilstein J. Org. Chem. 2023, 19, 901–908, doi:10.3762/bjoc.19.68

• cyclobutanone oximes. Substrate scope of δ-olefin-containing aliphatic nitriles. Reaction conditions: A mixture of cyclobutanone oxime derivative 1 (3.0 mmol, 3.0 equiv), alkene 2 (1.0 mmol, 1.0 equiv), Cu2O (1.0 mmol, 1.0 equiv) and potassium acetate (10.0 mmol, 10.0 equiv) in extra dry dioxane or DMSO (0.1 M

Pyridine C(sp²)–H bond functionalization under transition-metal and rare earth metal catalysis

• Haritha Sindhe,
• Malladi Mounika Reddy,
• Karthikeyan Rajkumar,
• Akshay Kamble,
• Amardeep Singh,
• Anand Kumar and
• Satyasheel Sharma

Beilstein J. Org. Chem. 2023, 19, 820–863, doi:10.3762/bjoc.19.62

• , and potassium pivalate (KOPiv) as base, linear C–H-alkylated products 40 were obtained from both acrylates and acrylamides in moderate to high yields (Scheme 9, reaction conditions a). However, when K3PO4 was employed as the base under otherwise identical conditions, the authors observed a switch in

• intact under the reaction conditions without any further oxidation. Different oxidants resulted in different products such as the monoarylated product 118 formed in the presence of TBHP as oxidant and the benzylated product 119 was obtained when potassium persulfate was used. Interestingly, aza-fluorene

• N-oxide 119b. In 2016, Wei and co-workers [93] reported the arylation of pyridine N-oxides 9 employing potassium (hetero)aryltrifluoroborates 126 as coupling partner using palladium acetate and TBAI (Scheme 24). Electron-withdrawing and donating groups on the pyridine N-oxide 9 resulted in the

Sulfate radical anion-induced benzylic oxidation of N-(arylsulfonyl)benzylamines to N-arylsulfonylimines

• Joydev K. Laha,
• Pankaj Gupta and
• Amitava Hazra

Beilstein J. Org. Chem. 2023, 19, 771–777, doi:10.3762/bjoc.19.57

• deliver N-arylsulfonylimines under mild reaction conditions is highly desirable. Previously, we reported a tandem oxidative intramolecular cyclization of N-aryl(benzyl)amines, having an internal nucleophile substituted at the ortho-position in the aniline ring, to nitrogen heterocycles using potassium

Palladium-catalyzed enantioselective three-component synthesis of α-arylglycine derivatives from glyoxylic acid, sulfonamides and aryltrifluoroborates

• Bastian Jakob,
• Nico Schneider,
• Luca Gengenbach and
• Georg Manolikakes

Beilstein J. Org. Chem. 2023, 19, 719–726, doi:10.3762/bjoc.19.52

• . Among different boronic acid derivatives, we identified aryltrifluoroborates as most promising candidates for the slow generation of the corresponding arylboronic acids under our slightly acid reaction conditions [24]. Therefore, we performed two initial control experiments. The reaction of potassium

• conditions for the use of potassium aryltrifluoroborate salts (Table 1). A quick survey of different solvents showed that the reaction proceeds efficiently only in nitromethane (Table 1, entry 1). Reactions in other common solvents, such as ethyl acetate, acetonitrile, tetrahydrofuran or dichloromethane led

Strategies in the synthesis of dibenzo[b,f]heteropines

• David I. H. Maier,
• Barend C. B. Bezuidenhoudt and
• Charlene Marais

Beilstein J. Org. Chem. 2023, 19, 700–718, doi:10.3762/bjoc.19.51

• . Knell et al. [40][41] reported a comparison of several catalysts, which included potassium-promoted iron, cobalt and manganese oxide catalysts, for the synthesis of 1a. Industrially, 1a is produced by the vapour phase dehydration of 2a over an iron/potassium/chromium catalyst system (Scheme 4) [42]. 2

• bromides and electron-withdrawing groups. The authors found that the addition of potassium iodide, and thus in situ palladium-catalysed halogen exchange, improved the yield of dibenzo[b,f]azepine 110. Unsymmetrical derivatives of 110 containing -CO2Me, -CF3, -NO2 and -CN substituents were synthesised in

Enolates ambushed – asymmetric tandem conjugate addition and subsequent enolate trapping with conventional and less traditional electrophiles

• Péter Kisszékelyi and
• Radovan Šebesta

Beilstein J. Org. Chem. 2023, 19, 593–634, doi:10.3762/bjoc.19.44

• , transformation to potassium trifluoroborate salt, hydrolysis, C–C cross-coupling, base-mediated elimination, radical C–B cleavage) [72]. Therefore, enantioenriched boronates are commonly applied intermediates in organometallic, medicinal, and other fields of chemistry. At the same time, some organoboronic acid

Combretastatins D series and analogues: from isolation, synthetic challenges and biological activities

• Jorge de Lima Neto and
• Paulo Henrique Menezes

Beilstein J. Org. Chem. 2023, 19, 399–427, doi:10.3762/bjoc.19.31

• potassium carbonate or methylcopper in pyridine led to compound 116 in only 10% yield. The cleavage of the benzyl ether proved to be complicated, as TFA also opened the lactone at the ester group (Scheme 24) [55]. In an attempt to circumvent these problems, the authors chose to use isovanillin (80) as

Investigation of cationic ring-opening polymerization of 2-oxazolines in the “green” solvent dihydrolevoglucosenone

• Solomiia Borova and
• Robert Luxenhofer

Beilstein J. Org. Chem. 2023, 19, 217–230, doi:10.3762/bjoc.19.21

• K. HFIP was supplemented with 3 g/L potassium triflate, and the flow rate was adjusted to 0.50 mL/min. Calibration was performed using PEG standards with molar masses ranging from 0.1–1,000 kg/mol. Before every measurement, samples were filtered through 0.2 µm PTFE filters, Roth (Karlsruhe, Germany

• most intense peak (m/z = 991) (α), can be attributed to PEtOx chains that are terminated by a molecule of DLG diol with a potassium ion doping (Figure 3). However, α-distribution can also be attributed to DLG-initiated PEtOx. The presence of signals attributed to a polymer with a solvent fragment

• potassium hydroxide tend to terminate at the 2-position. This results in the formation of POx containing a secondary amine and a cleavable ester terminal group [49]. Subsequent dehydration under conditions of MALDI-TOF mass spectrometry might lead to a dehydration, although this is speculative at this point

Preparation of β-cyclodextrin/polysaccharide foams using saponin

• Max Petitjean and
• José Ramón Isasi

Beilstein J. Org. Chem. 2023, 19, 78–88, doi:10.3762/bjoc.19.7

• carbon has been developed by Ma et al. [26], by the production of chitosan–saponin gels thanks to glutaraldehyde crosslinking. After adding potassium hydroxide, they freeze-dried the material and pyrolyzed the product. The resulting material possess a high absorption capacity of methylene blue, thanks to

Total synthesis of grayanane natural products

• Nicolas Fay,
• Rémi Blieck,
• Cyrille Kouklovsky and
• Aurélien de la Torre

Beilstein J. Org. Chem. 2022, 18, 1707–1719, doi:10.3762/bjoc.18.181

• diastereoselectivity in 58% on a 3 g scale. Subsequently, vinyl halide 48 was converted to diene 50 by Suzuki coupling with potassium vinyltrifluoroborate (49) in 90% yield (Scheme 8). The C7–C8 bond formation from a bridgehead carbocation was a real challenge to close the 7-membered ring. To achieve this, the

Synthesis of (−)-halichonic acid and (−)-halichonic acid B

• Keith P. Reber and
• Emma L. Niner

Beilstein J. Org. Chem. 2022, 18, 1629–1635, doi:10.3762/bjoc.18.174

• ] and subsequently hydrolyzed to give 4), we added excess DIBAL and allowed the reaction mixture to stir at room temperature for an additional 24 hours. Upon quenching the reaction with a saturated aqueous solution of potassium sodium tartrate (Rochelle’s salt), we were astonished to observe the clean

A new route for the synthesis of 1-deazaguanine and 1-deazahypoxanthine

• Raphael Bereiter,
• Marco Oberlechner and
• Ronald Micura

Beilstein J. Org. Chem. 2022, 18, 1617–1624, doi:10.3762/bjoc.18.172

• two options for the generation of 4-ethoxy-2,3,6-triaminopyridine (9). One possibility comprised the deprotection of the dicarbamate 5 with potassium hydroxide giving the diamine 6, followed by azo coupling with the diazonium salt obtained from aniline and sodium nitrite to give azo compound 7

Formal total synthesis of macarpine via a Au(I)-catalyzed 6-endo-dig cycloisomerization strategy

• Jiayue Fu,
• Bingbing Li,
• Zefang Zhou,
• Maosheng Cheng,
• Lu Yang and
• Yongxiang Liu

Beilstein J. Org. Chem. 2022, 18, 1589–1595, doi:10.3762/bjoc.18.169

• deprotection of the silyl group was accomplished in the presence of potassium carbonate (K2CO3) and methanol to provide the terminal alkyne 5 in 96% yield in two steps. The iodoarene 8 [12][16] was facilely synthesized from sesamol (6) via methylation and iodination in an overall yield of 67%. With the

Comparison of crystal structure and DFT calculations of triferrocenyl trithiophosphite’s conformance

• Ruslan P. Shekurov,
• Mikhail N. Khrizanforov,
• Ilya A. Bezkishko,
• Tatiana P. Gerasimova,
• Almaz A. Zagidullin,
• Daut R. Islamov and
• Vasili A. Miluykov

Beilstein J. Org. Chem. 2022, 18, 1499–1504, doi:10.3762/bjoc.18.157

• of Sciences. Synthesis To a suspension of white phosphorus (0.08 g, 0.645 mmol) in acetone (30 mL) were added diferrocenyldisulfide (1.68 g, 3.8 mmol) and 0.2 mL 15 N solution of potassium hydroxide. The reaction mixture was stirred for 12 h at room temperature and then the solvent was evaporated in

Preparation of an advanced intermediate for the synthesis of leustroducsins and phoslactomycins by heterocycloaddition

• Anaïs Rousseau,
• Guillaume Vincent and
• Cyrille Kouklovsky

Beilstein J. Org. Chem. 2022, 18, 1385–1395, doi:10.3762/bjoc.18.143

• -triisopropylsilyloxyhexa-1,3-dien (17): A 0.5 M solution of potassium hexamethyldisilazide in toluene (4.4 mL, 2.22 mmol, 1.2 equiv) was added to a cooled (−78 °C) solution of diethyl chlorophosphate (0.27 mL, 1.85 mmol) in anhydrous THF (7 mL). A solution of the enone 16 (500 mg, 1.85 mmol) in THF (6 mL) was then slowly

Synthesis and electrochemical properties of 3,4,5-tris(chlorophenyl)-1,2-diphosphaferrocenes

• Almaz A. Zagidullin,
• Farida F. Akhmatkhanova,
• Mikhail N. Khrizanforov,
• Robert R. Fayzullin,
• Tatiana P. Gerasimova,
• Ilya A. Bezkishko and
• Vasili A. Miluykov

Beilstein J. Org. Chem. 2022, 18, 1338–1345, doi:10.3762/bjoc.18.139

• ppm for 1c). Further, reaction mixtures with compounds 1 were treated with SOCl2 for 3–4 h at 0 °C and converted to chloro derivatives 2. In the next step, compounds 2 and starting substituted benzaldehydes were subsequently treated with 2 equiv of potassium tert-butoxide in THF for 18 hours at room

• distilled at reduced pressure to give pure compounds. In a final step, we used the above mentioned approach of combining the C1 and C2 building blocks and found that chloroarylcarbenes, generated from the corresponding benzal chlorides 4b,c under the action of potassium tert-butoxide, reacted with 1,2-bis

Molecular diversity of the base-promoted reaction of phenacylmalononitriles with dialkyl but-2-ynedioates

• Hui Zheng,
• Ying Han,
• Jing Sun and
• Chao-Guo Yan

Beilstein J. Org. Chem. 2022, 18, 991–998, doi:10.3762/bjoc.18.99

• ). Results and Discussion Initially, the reaction conditions were briefly optimized by using p-methylphenacylmalononitrile (1a) and diethyl but-2-ynedioate (2a) as standard according to the previous reported work [31]. In the presence of potassium carbonate and tetrabutylammonium chloride (TBAC), the

First example of organocatalysis by cathodic N-heterocyclic carbene generation and accumulation using a divided electrochemical flow cell

• Daniele Rocco,
• Ana A. Folgueiras-Amador,
• Richard C. D. Brown and
• Marta Feroci

Beilstein J. Org. Chem. 2022, 18, 979–990, doi:10.3762/bjoc.18.98

• by staining with potassium permanganate. Flash column chromatography was performed using high purity silica gel, pore size 60 Å, 230–400 mesh particle size, purchased from Merck. 1H NMR and 13C NMR spectra were recorded in CDCl3 (purchased from Cambridge Isotope Laboratories) at 298 K using a Bruker

Introducing a new 7-ring fused diindenone-dithieno[3,2-b:2',3'-d]thiophene unit as a promising component for organic semiconductor materials

• Valentin H. K. Fell,
• Joseph Cameron,
• Alexander L. Kanibolotsky,
• Eman J. Hussien and
• Peter J. Skabara

Beilstein J. Org. Chem. 2022, 18, 944–955, doi:10.3762/bjoc.18.94

• )dithieno[3,2-b:2’,3’-d]thiophene (26): a) Br2, CHCl3, rt, overnight, reflux, 4 h, 94% [33]; b) n-BuLi, −78 °C, 30 min, 1-formylpiperidine, anhydrous THF, −78 °C, then rt, overnight [15], 88%; c) ethyl thioglycolate, anhydrous potassium carbonate, anhydrous N,N-dimethylformamide, rt, 3 d, 83% [15]; d) 1 M

On Reuben G. Jones synthesis of 2-hydroxypyrazines

• Pierre Legrand and
• Yves L. Janin

Beilstein J. Org. Chem. 2022, 18, 935–943, doi:10.3762/bjoc.18.93

• (Table 2, entries 5 and 6 in comparison with entry 2). Trials using ethanol or isopropanol as a solvent (Table 2, entries 7 and 8) were not successful, plausibly because of a precipitation of the reaction medium before the end of the base addition. Trials with lithium or potassium hydroxide (Table 2

Synthesis and HDAC inhibitory activity of pyrimidine-based hydroxamic acids

• Virginija Jakubkiene,
• Gabrielius Ernis Valiulis,
• Markus Schweipert,
• Asta Zubriene,
• Daumantas Matulis,
• Franz-Josef Meyer-Almes and
• Sigitas Tumkevicius

Beilstein J. Org. Chem. 2022, 18, 837–844, doi:10.3762/bjoc.18.84

• alkylation reaction of compound 19 with methyl 6-bromohexanoate and select the conditions favoring the formation of the O-isomer, a weak base, potassium carbonate, and a bipolar aprotic solvent, dimethylformamide, were used. The reaction was carried out at room temperature for 120 hours and a significant

Synthesis of α-(perfluoroalkylsulfonyl)propiophenones: a new set of reagents for the light-mediated perfluoroalkylation of aromatics

• Durbis J. Castillo-Pazos,
• Juan D. Lasso and
• Chao-Jun Li

Beilstein J. Org. Chem. 2022, 18, 788–795, doi:10.3762/bjoc.18.79

• 2-(perfluorohexyl)-1,1-diphenylethylene (8), and propiophenone through GC–MS analysis. Additionally, the presence of free SO2 gas was confirmed by the reaction of acidic potassium dichromate solution on paper (green coloration of the exposed surface). See Supporting Information File 1 for details

Synthesis of odorants in flow and their applications in perfumery

• Merlin Kleoff,
• Paul Kiler and
• Philipp Heretsch

Beilstein J. Org. Chem. 2022, 18, 754–768, doi:10.3762/bjoc.18.76

• (34, obtained from castor oil) and benzaldehyde (33). In the industrial process, stoichiometric amounts of sodium- or potassium hydroxide are used resulting in the formation of large quantities of undesired side products, e.g., enone 36, the aldol condensation product of two molecules of heptanal [9

• ) following the Perkin synthesis (Scheme 10) [42]. Salicylaldehyde (44) is mixed with a solution of potassium acetate and acetic acid in acetic anhydride. The reaction mixture is pumped through two separated tube reactors at 150 °C and 240 °C, respectively, proceeding with a combined residence time of 22.5

• = mass flow controller. Synthesis of thymol (41) from m-cresol (39) and isopropyl alcohol via Fries-type rearrangement of ether 40. Preparation of coumarin (46) by reaction of salicylaldehyde (44) with potassium acetate, acetic acid, and acetic anhydride at elevated temperature in two separated tube

A trustworthy mechanochemical route to isocyanides

• Francesco Basoccu,
• Federico Cuccu,
• Federico Casti,
• Rita Mocci,
• Claudia Fattuoni and
• Andrea Porcheddu

Beilstein J. Org. Chem. 2022, 18, 732–737, doi:10.3762/bjoc.18.73

• straightforward procedure. Keywords: green chemistry; isocyanide; isonitriles; mechanochemistry; Introduction Isocyanides were first discovered more than a century ago by Lieke in Göttingen after having handled allyl iodide and potassium cyanide to synthesize crotonic acid. This attempt, instead, brought to the

• organic bases like potassium tert-butoxide and imidazole proved to be as effective as triethylamine. Much to our surprise, we observed that the association between only 1 equivalent of triethylamine and 6 equivalents of sodium carbonate brought a good conversion rate of 1f in 2f at a frequency of 36 Hz