Flow synthesis of oxadiazoles coupled with sequential in-line extraction and chromatography

• Kian Donnelly and
• Marcus Baumann

Beilstein J. Org. Chem. 2022, 18, 232–239, doi:10.3762/bjoc.18.27

• poly-heterocyclic compound 2m in low yield (Scheme 4). Having investigated the substrate scope in continuous flow mode, we then moved to probe the scalability of the reaction. A primary advantage of carrying out a reaction in continuous flow is the ease of which it can subsequently be scaled-up

Solvent-free synthesis of enantioenriched β-silyl nitroalkanes under organocatalytic conditions

• Akhil K. Dubey and
• Raghunath Chowdhury

Beilstein J. Org. Chem. 2021, 17, 2642–2649, doi:10.3762/bjoc.17.177

• was found to adopt “(S)” configuration which was unambiguously established by single crystal X-ray diffraction analysis (Figure 1) [45]. To prove the scalability of this synthetic method, we examined the synthesis of 3c and ent-3d in a 1 mmol scale (Scheme 5). The products 3c and ent-3d were isolated

Cryogels: recent applications in 3D-bioprinting, injectable cryogels, drug delivery, and wound healing

• Luke O. Jones,
• Leah Williams,
• Tasmin Boam,
• Martin Kalmet,
• Chidubem Oguike and
• Fiona L. Hatton

Beilstein J. Org. Chem. 2021, 17, 2553–2569, doi:10.3762/bjoc.17.171

• physically crosslinked PVA cryogels show even greater mechanical strength than their chemically crosslinked counterparts [23]. Therefore, it is achievable to obtain similar properties with physical crosslinking, yet the matter of reproducibility and scalability remains an issue. To assess the mechanical

A novel methodology for the efficient synthesis of 3-monohalooxindoles by acidolysis of 3-phosphate-substituted oxindoles with haloid acids

• Li Liu,
• Yue Li,
• Tiao Huang,
• Dulin Kong and
• Mingshu Wu

Beilstein J. Org. Chem. 2021, 17, 2321–2328, doi:10.3762/bjoc.17.150

• -substituted oxindole intermediates and SN1 reactions with haloid acids. This new procedure features mild reaction conditions, simple operation, good yield, readily available and inexpensive starting materials, and gram-scalability. Keywords: acidolysis; haloid acids; isatin; 3-monohalooxindole; 3-phosphate

Facile and innovative catalytic protocol for intramolecular Friedel–Crafts cyclization of Morita–Baylis–Hillman adducts: Synergistic combination of chiral (salen)chromium(III)/BF₃·OEt₂ catalysis

• Karthikeyan Soundararajan,
• Helen Ratna Monica Jeyarajan,
• Raju Subimol Kamarajapurathu and
• Karthik Krishna Kumar Ayyanoth

Beilstein J. Org. Chem. 2021, 17, 2186–2193, doi:10.3762/bjoc.17.140

• the dialkoxy and ortho-halide- substituted MBH adducts. Thereby alternative synthetic routes should be accessed to overcome the harsh reaction conditions, structural requirements and scalability issues intrinsically associated with the literature reported procedures. Hence chiral catalysts could

Progress and challenges in the synthesis of sequence controlled polysaccharides

• Giulio Fittolani,
• Theodore Tyrikos-Ergas,
• Denisa Vargová,
• Manishkumar A. Chaube and
• Martina Delbianco

Beilstein J. Org. Chem. 2021, 17, 1981–2025, doi:10.3762/bjoc.17.129

• considerably reduced the time needed for the stereoselective synthesis of linear α(1–6)-mannans (ranging from 5mer to 20mer) [275]. The biggest advantage of this approach is the easy scalability, up to a gram scale. However, this strategy is limited to one type of linkage (i.e., only α(1–6) linkages) and does

Iodine-catalyzed electrophilic substitution of indoles: Synthesis of (un)symmetrical diindolylmethanes with a quaternary carbon center

• Thanigaimalai Pillaiyar,
• Masoud Sedaghati,
• Andhika B. Mahardhika,
• Lukas L. Wendt and
• Christa E. Müller

Beilstein J. Org. Chem. 2021, 17, 1464–1475, doi:10.3762/bjoc.17.102

• , and scalability to obtain gram amounts for biological studies. Selected compounds were found to display affinity for cannabinoid receptors, which are promising drug targets for the treatment of inflammatory and neurodegenerative diseases. Keywords: alkylation of indole; anti-inflammatory; binding

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

• temperature and pressure range access, the potential for in-line purification, monitoring and telescoping, linear scalability and more efficient mixing. These applications are very attractive for a synthetic chemist in all settings, especially considering the current ever-increasing industrial pressure to

• , difficulty in maintaining the reaction temperature and the occurrence of greater amounts of acetone and aldehyde self-condensation/polymerisation. By adopting a flow protocol and using a Comet X-01 micromixer (with linear scalability), more efficient mixing was attained and less aldehyde self-condensation

• for a marked reduction in reaction times (20 min vs 40 h) via improved mixing, and the ability to conduct the experiment at higher temperature without detrimental results. They also confirmed the easy scalability of the process from a 1 to 4 mL reactor without loss of selectivity and efficiency. The

Coupling biocatalysis with high-energy flow reactions for the synthesis of carbamates and β-amino acid derivatives

• Alexander Leslie,
• Thomas S. Moody,
• Megan Smyth,
• Scott Wharry and
• Marcus Baumann

Beilstein J. Org. Chem. 2021, 17, 379–384, doi:10.3762/bjoc.17.33

• provide future chemists with hands-on experience in modern synthesis technologies. Apart from increased safety and scalability, reaction telescoping is one of the most attractive features of flow synthesis allowing for streamlined routes to minimize the need for the isolation and handling of potentially

A sustainable strategy for the straightforward preparation of 2H-azirines and highly functionalized NH-aziridines from vinyl azides using a single solvent flow-batch approach

• Michael Andresini,
• Leonardo Degannaro and
• Renzo Luisi

Beilstein J. Org. Chem. 2021, 17, 203–209, doi:10.3762/bjoc.17.20

• could generate some risks, due to the explosive nature of organic azides, and possible overpressure issues caused by nitrogen generation at high temperatures. Consequently, scalability and control of this processes represents a real challenge. The exploitation of microfluidic technologies has therefore

Dawn of a new era in industrial photochemistry: the scale-up of micro- and mesostructured photoreactors

• Emine Kayahan,
• Mathias Jacobs,
• Leen Braeken,
• Leen C.J. Thomassen,
• Simon Kuhn,
• Tom van Gerven and
• M. Enis Leblebici

Beilstein J. Org. Chem. 2020, 16, 2484–2504, doi:10.3762/bjoc.16.202

• . This benchmark relates the productivity to the energy efficiency. Therefore, it is commonly applied in recent studies to assess the scalability of the process [15][20][21][22]. where STY is the space time yield, n is the amount of product produced, t is the time, Vreactor is the reactor volume, c0 is

• straightforward scalability with the same mass transfer characteristics by keeping the periodic heart-shaped static mixers [44]. The NETmix reactor (shown in Figure 5e) was originally developed by Brito Lopes et al. [60]. The NETmix reactor was coated with a TiO2 photocatalyst for the removal of oxytetracycline

Photosensitized direct C–H fluorination and trifluoromethylation in organic synthesis

• Shahboz Yakubov and
• Joshua P. Barham

Beilstein J. Org. Chem. 2020, 16, 2151–2192, doi:10.3762/bjoc.16.183

• . One exciting development in C–F bond formation is the use of small-molecule photosensitizers, allowing the reactions i) to proceed under mild conditions, ii) to be user-friendly, iii) to be cost-effective and iv) to be more amenable to scalability than typical photoredox-catalyzed methods. In this

• previously for benzylic fluorination [130]. In a later perspective [36], the authors speculated that the amide served as a directing group. Indeed, in situ-formed ammonium carbamates were recently identified to direct the HAT of a quinuclidinium radical cation [208]. 3.5 Scalability of C–H fluorinations That

Access to highly substituted oxazoles by the reaction of α-azidochalcone with potassium thiocyanate

• Mysore Bhyrappa Harisha,
• Pandi Dhanalakshmi,
• Rajendran Suresh,
• Raju Ranjith Kumar and
• Shanmugam Muthusubramanian

Beilstein J. Org. Chem. 2020, 16, 2108–2118, doi:10.3762/bjoc.16.178

• . Further, the scalability of the reaction using an optimized protocol was investigated by conducting the reaction on a multigram scale (Scheme 3). It was found that the reaction between 1i and 2 on a multigram scale proceeded to afford 3i in 97% yield. In Figure 2, photograph a shows the reaction mixture

When metal-catalyzed C–H functionalization meets visible-light photocatalysis

• Lucas Guillemard and
• Joanna Wencel-Delord

Beilstein J. Org. Chem. 2020, 16, 1754–1804, doi:10.3762/bjoc.16.147

• photochemical reactions due to the inherent lack of scalability issues as a consequence of the Beer–Lambert law of absorption. Consequently, continuous-flow chemistry represents one of the few ways in which pharmaceutically relevant quantities of compounds can be synthesized through photoinduced transformations

Heterogeneous photocatalysis in flow chemical reactors

• Christopher G. Thomson,
• Ai-Lan Lee and
• Filipe Vilela

Beilstein J. Org. Chem. 2020, 16, 1495–1549, doi:10.3762/bjoc.16.125

One-pot synthesis of 1,3,5-triazine-2,4-dithione derivatives via three-component reactions

• Gui-Feng Kang and
• Gang Zhang

Beilstein J. Org. Chem. 2020, 16, 1447–1455, doi:10.3762/bjoc.16.120

• tributyl orthoformate (3d) provided the corresponding products similarly to trimethyl orthoformate and the results are summarized in Scheme 3. To assess the scalability of the multicomponent reaction, a 10 mmol scale synthesis of 6-(methylthio)-4-phenyl-3,4-dihydro-1,3,5-triazine-2(1H)-thione (6aa) was

Disposable cartridge concept for the on-demand synthesis of turbo Grignards, Knochel–Hauser amides, and magnesium alkoxides

• Mateo Berton,
• Kevin Sheehan,
• Andrea Adamo and
• D. Tyler McQuade

Beilstein J. Org. Chem. 2020, 16, 1343–1356, doi:10.3762/bjoc.16.115

• stability in the steady state and the scalability up to ≈100 mmol was verified using two perfluorinated tubular reactors of 9.5 mm (ID) on the Vapourtec flow system. The first column containing Mg was heated at 80 °C, using a temperature-controlled glass manifold [51]. The LiCl column was kept at 25 °C. The

Recent applications of porphyrins as photocatalysts in organic synthesis: batch and continuous flow approaches

• Rodrigo Costa e Silva,
• Luely Oliveira da Silva,
• Aloisio de Andrade Bartolomeu,
• Timothy John Brocksom and
• Kleber Thiago de Oliveira

Beilstein J. Org. Chem. 2020, 16, 917–955, doi:10.3762/bjoc.16.83

• scale. The scalability of these processes had been limited by the requirement for small-volume batch reactors equipped with mercury vapor discharge lamps [1]. In general, the use of batch reactors on a large-scale is hampered due to the attenuation effect of photon transport (Bouguer–Lambert–Beer law

• corresponding functionalized dienes. A scope with 23 substrates is presented and the products were obtained in 10–96% yield with scalability (up to 1 g-scale in a telescoped protocol). In 2019, Opatz and co-workers reported one of the most efficient and elegant total syntheses of (–)-oxycodone, using as key

• porphyrins as photocatalysts under sunlight irradiation furnished the corresponding sulfoxides with high chemoselectivity (up to 100%), scalability (up to 2.6 mmol) and high yields (up to 100%) [94]. According to the authors, the protonation of the porphyrins causes a red-shift of the photosensitizer with an

Room-temperature Pd/Ag direct arylation enabled by a radical pathway

• Amy L. Mayhugh and
• Christine K. Luscombe

Beilstein J. Org. Chem. 2020, 16, 384–390, doi:10.3762/bjoc.16.36

• that proceed under mild conditions, improving energy requirements and scalability. Work is ongoing to leverage this insight into new direct arylation methods utilizing palladium-involved radicals. 1H NMR (500 MHz, CDCl3) of (a) 5-iodo-1-octylindole monomer (b) PIn prepared according to conditions in

A review of asymmetric synthetic organic electrochemistry and electrocatalysis: concepts, applications, recent developments and future directions

• Munmun Ghosh,
• Valmik S. Shinde and
• Magnus Rueping

Beilstein J. Org. Chem. 2019, 15, 2710–2746, doi:10.3762/bjoc.15.264

• sequences, these strategies enable advancements in reaction scalability as well as tunability. Having described the research that has been conducted to achieve suitable ‘electrical’ replacements of conventional ‘chemical’ organic transformations, it is clear that the establishment of stereoselective

A novel three-component reaction between isocyanides, alcohols or thiols and elemental sulfur: a mild, catalyst-free approach towards O-thiocarbamates and dithiocarbamates

• András György Németh,
• György Miklós Keserű and
• Péter Ábrányi-Balogh

Beilstein J. Org. Chem. 2019, 15, 1523–1533, doi:10.3762/bjoc.15.155

• characterized by 1H NMR, 13C NMR, HRMS and melting point. After the successful application of various nucleophiles, it was our intention to investigate the scalability of the procedure. Thus, a twenty-fold scale-up of the reaction between the isocyanide 1a, sulfur and methanol (2a) was performed (Scheme 5). In

Hoveyda–Grubbs catalysts with an N→Ru coordinate bond in a six-membered ring. Synthesis of stable, industrially scalable, highly efficient ruthenium metathesis catalysts and 2-vinylbenzylamine ligands as their precursors

• Kirill B. Polyanskii,
• Kseniia A. Alekseeva,
• Pavel V. Raspertov,
• Pavel A. Kumandin,
• Eugeniya V. Nikitina,
• Atash V. Gurbanov and
• Fedor I. Zubkov

Beilstein J. Org. Chem. 2019, 15, 769–779, doi:10.3762/bjoc.15.73

• alkaline media in a total yield of 61–73% (Table 2). It should be noted that the above-described method was useful for the synthesis of styrenes in quantities of up to 100 g (or even more, if necessary). This scalability was purposefully demonstrated by the multigram synthesis of 5e (see Experimental part

Homo- and hetero-difunctionalized β-cyclodextrins: Short direct synthesis in gram scale and analysis of regiochemistry

• Gábor Benkovics,
• Mihály Bálint,
• Éva Fenyvesi,
• Erzsébet Varga,
• Szabolcs Béni,
• Konstantina Yannakopoulou and
• Milo Malanga

Beilstein J. Org. Chem. 2019, 15, 710–720, doi:10.3762/bjoc.15.66

• reproducibility, ease of product purification, scalability of the reactions and versatility of the substituents introduced. Specifically, the prepared ditosylated β-CDs were separated using preparative reversed-phase column chromatography and their structures were elucidated by NMR experiments. Azidation led to

The LANCA three-component reaction to highly substituted β-ketoenamides – versatile intermediates for the synthesis of functionalized pyridine, pyrimidine, oxazole and quinoxaline derivatives

• Tilman Lechel,
• Roopender Kumar,
• Mrinal K. Bera,
• Reinhold Zimmer and
• Hans-Ulrich Reissig

Beilstein J. Org. Chem. 2019, 15, 655–678, doi:10.3762/bjoc.15.61

• reactions in larger scale, e.g., the synthesis of β-ketoenamides KE35 that was prepared in 3.5 g quantity [34]. The scalability of the three-component reactions seems therefore no problem which is important for the multistep preparation of subsequent products (see below). Aromatic dinitriles such as 1,3

Assembly of fully substituted triazolochromenes via a novel multicomponent reaction or mechanochemical synthesis

• Robby Vroemans,
• Yenthel Verhaegen,
• My Tran Thi Dieu and
• Wim Dehaen

Beilstein J. Org. Chem. 2018, 14, 2689–2697, doi:10.3762/bjoc.14.246

• salicylaldehydes are used. Complementary to this the one-pot three-component reaction gave better results for liquid salicylaldehydes. In order to show the utility of the developed methodologies towards possible drug discovery, the scalability of the reactions was explored (Scheme 4). Both developed methodologies