Synthesis and characterization of S,N-heterotetracenes

• Astrid Vogt,
• Florian Henne,
• Christoph Wetzel,
• Elena Mena-Osteritz and
• Peter Bäuerle

Beilstein J. Org. Chem. 2020, 16, 2636–2644, doi:10.3762/bjoc.16.214

• –property relationships showing the influence of the number and sequence of pyrrole rings. The highly planar π-conjugated systems revealed interesting structural features such as nearly complete bond length equalization and S–S and S–π dipolar interactions in the solid state. Due to tunable optoelectronic

Particle size effect in the mechanically assisted synthesis of β-cyclodextrin mesitylene sulfonate

• Stéphane Menuel,
• Sébastien Saitzek,
• Eric Monflier and
• Frédéric Hapiot

Beilstein J. Org. Chem. 2020, 16, 2598–2606, doi:10.3762/bjoc.16.211

• of a reaction in the solid state. As such, we recently investigated the influence of the particle size of β-CD in the synthesis of β-CD mesitylene sulfonate (β-CDMts) in the solid state using a vibrating ball-mill. We were particularly interested in the role of the particle size on the kinetics of

• out in the presence of KOH as a base. The data series were confronted with kinetics models to get insight in the way the reactions proceeded. The diversity of possible models suggests that multiple mechanochemical processes can account for the formation of β-CDMts in the solid state. Throughout the

• , 7, and 8 α-ᴅ-glucopyranoside units, respectively. CDs are recognized as effective excipients in the formulation of numerous drugs [7][8][9][10]. Upon grinding, CDs form inclusion complexes with the drugs in the solid state, resulting in a significantly faster dissolution rate and increased

Thermodynamic and electrochemical study of tailor-made crown ethers for redox-switchable (pseudo)rotaxanes

• Henrik Hupatz,
• Marius Gaedke,
• Hendrik V. Schröder,
• Julia Beerhues,
• Arto Valkonen,
• Fabian Klautzsch,
• Sebastian Müller,
• Felix Witte,
• Kari Rissanen,
• Biprajit Sarkar and
• Christoph A. Schalley

Beilstein J. Org. Chem. 2020, 16, 2576–2588, doi:10.3762/bjoc.16.209

• Information File 1). Slow diffusion of CH3CN into a concentrated solution of NDIC7 in CH2Cl2 yielded single crystals suitable for X-ray diffraction (Figure 2b). The macrocycle displays a folded conformation in the solid state due to the flexible linker, featuring an intramolecular NDI/naphthalene stacking

• is impeded. NDIC8 therefore does not fold but stacks with the naphthalene and NDI moieties of the neighbors alternatingly in the solid state and with a typical plane/plane distance of 3.57 Å [49]. Thermodynamic analysis of crown ether/ammonium complexes For the investigation of the thermodynamic

• intramolecular folding which was observed in the solid-state structure and is likely also present in solution, as indicated by a charge-transfer band. Nevertheless, it might be applicable for redox-controlled metal-sensing [60][61][62]. On the contrary, NDIC8 forms pseudo[2]rotaxanes and facilitates the

Water-soluble host–guest complexes between fullerenes and a sugar-functionalized tribenzotriquinacene assembling to microspheres

• Si-Yuan Liu,
• Xin-Rui Wang,
• Man-Ping Li,
• Wen-Rong Xu and
• Dietmar Kuck

Beilstein J. Org. Chem. 2020, 16, 2551–2561, doi:10.3762/bjoc.16.207

• the solid state. It is shown that the inclusion of fullerenes into the water-soluble TBTQ-based host greatly compensates for their water-repulsive nature and results in the formation of self-assembled microspheres that may have some potential for biological and pharmaceutical applications. Results and

Chan–Evans–Lam N1-(het)arylation and N1-alkеnylation of 4-fluoroalkylpyrimidin-2(1H)-ones

• Viktor M. Tkachuk,
• Oleh O. Lukianov,
• Mykhailo V. Vovk,
• Isabelle Gillaizeau and
• Volodymyr A. Sukach

Beilstein J. Org. Chem. 2020, 16, 2304–2313, doi:10.3762/bjoc.16.191

• 1а with pinacol 2-phenylethynyl boronate. The meta-methoxystyryl derivative 5c was found to easily undergo photodimerization in solid state upon sunlight exposure, leading to the formation of compound 8 with a central cyclobutane ring (see Supporting Information File 1). As proved previously for

Styryl-based new organic chromophores bearing free amino and azomethine groups: synthesis, photophysical, NLO, and thermal properties

• Anka Utama Putra,
• Deniz Çakmaz,
• Nurgül Seferoğlu,
• Alberto Barsella and
• Zeynel Seferoğlu

Beilstein J. Org. Chem. 2020, 16, 2282–2296, doi:10.3762/bjoc.16.189

• comprising of electron-donating and accepting groups in a donor–π–acceptor (D–π–A) system. The dyes exhibit strong absorption and emission properties in solution and in the solid state [1][2][3]. One important feature of these molecules is an exceptional polarizability which is a crucial criterion for NLO

The B & B approach: Ball-milling conjugation of dextran with phenylboronic acid (PBA)-functionalized BODIPY

• Patrizia Andreozzi,
• Lorenza Tamberi,
• Elisamaria Tasca,
• Gina Elena Giacomazzo,
• Marta Martinez,
• Mirko Severi,
• Marco Marradi,
• Stefano Cicchi,
• Sergio Moya,
• Giacomo Biagiotti and
• Barbara Richichi

Beilstein J. Org. Chem. 2020, 16, 2272–2281, doi:10.3762/bjoc.16.188

• reactions, and even in nanomaterials preparation [1][2][3][4][5]. Indeed, solid-state mechanochemical methodologies are a viable alternative to traditional syntheses in solution [4] for the preparation of complex molecules, either under solvent-free conditions, named ‘neat grinding’, or in nearly solvent

• ), by following a straightforward synthetic strategy recently reported by some of us [26]. Then, in order to assess the efficacy of the solid-state milling approach in the formation of boronate esters between the PBA moiety of 1 and the vicinal diols of dextran (Dex), both mechanochemical and

Synthesis of 6,13-difluoropentacene

• Matthias W. Tripp and
• Ulrich Koert

Beilstein J. Org. Chem. 2020, 16, 2136–2140, doi:10.3762/bjoc.16.181

• derivatization of known compounds [4]. Since the performance of these devices is strongly dependent on the optoelectronic solid-state properties of the pentacenes, predictable control of the electronic structure is desirable. A common strategy to influence the electronic properties of pentacenes, without

Clustering and curation of electropherograms: an efficient method for analyzing large cohorts of capillary electrophoresis glycomic profiles for bioprocessing operations

• Ian Walsh,
• Matthew S. F. Choo,
• Sim Lyn Chiin,
• Amelia Mak,
• Shi Jie Tay,
• Pauline M. Rudd,
• Yang Yuansheng,
• Andre Choo,
• Ho Ying Swan and
• Terry Nguyen-Khuong

Beilstein J. Org. Chem. 2020, 16, 2087–2099, doi:10.3762/bjoc.16.176

• Capillary electrophoresis of the released and APTS-labelled antibody N-glycans was performed on a CESI8000 CE instrument (Sciex) equipped with a solid state laser-induced fluorescent detector (excitation 488 nm, emission 520 nm). Separations were made across a 20 cm effective length (30 cm total length), 50

Reactions of 3-aryl-1-(trifluoromethyl)prop-2-yn-1-iminium salts with 1,3-dienes and styrenes

• Thomas Schneider,
• Michael Keim,
• Bianca Seitz and
• Gerhard Maas

Beilstein J. Org. Chem. 2020, 16, 2064–2072, doi:10.3762/bjoc.16.173

• -(dimethylamino)indenes as the major products. Various other synthetic applications of these reactive propyn-1-iminium salts will be reported in due course. Solid-state molecular structure of 11 (ORTEP plot). Solid-state molecular structure of 12c (ORTEP plot). Solid-state molecular structure of 12d (ORTEP plot

• . Synthesis and solid-state molecular structure (ORTEP plot) of pentafulvene 19; selected bond distances (Å), see molecule plot for atom numbering: C8‒C7 1.370(2), C7‒C17 1.481(2), C17‒C18 1.343(2), C18‒C5 1.471(2), C5‒C6 1.374(2), C6‒C7 1.496(2). Proposed mechanistic pathway leading to fulvene 19

Isolation and structure determination of a tetrameric sulfonyl dilithio methandiide in solution based on crystal structure analysis and ⁶Li/¹³C NMR spectroscopic data

• Jürgen Vollhardt,
• Hans Jörg Lindner and
• Hans-Joachim Gais

Beilstein J. Org. Chem. 2020, 16, 2057–2063, doi:10.3762/bjoc.16.172

• . Their anion is stabilized by electrostatic interaction, polarization, and negative nC-σ*SR hyperconjugation, with electrostatic interaction as dominating mechanism [56][58]. The lithio methanides 1 are monomeric or dimeric in THF solution and the solid state, depending on Lewis basic ligands of the

• atoms and not between orbitals. A similar conclusion was reached in the case of the dilithio methandiides IIIa and IIIb. Conclusion The determination of the structure of tetramer 2a-I in both the solution and solid state, which is the first of a dilithio methandiide, was achieved based on X-ray crystal

Controlling the stereochemistry in 2-oxo-aldehyde-derived Ugi adducts through the cinchona alkaloid-promoted electrophilic fluorination

• Yuqing Wang,
• Gaigai Wang,
• Anatoly A. Peshkov,
• Ruwei Yao,
• Muhammad Hasan,
• Manzoor Zaman,
• Chao Liu,
• Stepan Kashtanov,
• Olga P. Pereshivko and
• Vsevolod A. Peshkov

Beilstein J. Org. Chem. 2020, 16, 1963–1973, doi:10.3762/bjoc.16.163

• -triggered complexation with boron trifluoride diethyl etherate. The resulting O,O-chelated boron complexes 11 turned out to be strong solid-state emitters featuring clear aggregation-induced emission (AIE) characteristics [61]. Encouraged by these results, we decided to attempt the reaction of 2-oxo

Clickable azide-functionalized bromoarylaldehydes – synthesis and photophysical characterization

• Dominik Göbel,
• Marius Friedrich,
• Enno Lork and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2020, 16, 1683–1692, doi:10.3762/bjoc.16.139

• Figure 2a and Figures S1–S11 in Supporting Information File 1). The emission spectra for para-bromocarbaldehyde 3 and adamantyltriazole 34 in the solid-state show maxima at 440 nm (for compound 3) and 416 nm (for compound 34) (see Figure 2b). Additionally, fluorescence lifetimes (τ) of 3 and 34 were

• determined by time correlated single photon counting (TCSPC), indicating low lifetimes of 2.21 ns (for compound 3) and 3.23 ns (for compound 34) for lower populated species (see Figure S6, Supporting Information File 1). Quantum yields (Φ) of both derivatives are below 1% in the solid-state. In chloroform

• , no luminescence was detected for the para derivatives. All ortho derivatives exhibited luminescence neither in solution nor in the solid-state [73]. These observations for the para- and ortho-bromobenzaldehydes indicate that the phosphorescence is quenched in these systems, yielding only a weak

Fluorohydration of alkynes via I(I)/I(III) catalysis

• Jessica Neufeld,
• Constantin G. Daniliuc and
• Ryan Gilmour

Beilstein J. Org. Chem. 2020, 16, 1627–1635, doi:10.3762/bjoc.16.135

• established by single crystal X-ray diffraction (Figure 2). Interestingly, a study by Pattison has established that α-fluoroketones preferentially adopt a cis-conformation in polar solvents [54]. In the solid state, a dihedral angle of φ = −3.7° was observed thereby placing the C–F bond in the same plane as

Five-component, one-pot synthesis of an electroactive rotaxane comprising a bisferrocene macrocycle

• Natalie Lagesse,
• Luca Pisciottani,
• Maxime Douarre,
• Pascale Godard,
• Brice Kauffmann,
• Vicente Martí-Centelles and
• Nathan D. McClenaghan

Beilstein J. Org. Chem. 2020, 16, 1564–1571, doi:10.3762/bjoc.16.128

• was E1/2 = +0.380 V vs SCE showing that rotaxane 1a retained the redox properties of the parent ferrocene [21][22]. Importantly, the full reversibility of the one electron oxidation–reduction process attested to the stability of the electroactive system. Solid-state X-ray structure The solid-state

• structure of rotaxane 1a was determined by single crystal X-ray diffraction of crystals obtained by slow evaporation of a dichloromethane solution. The analysis of the X-ray solid-state structure of the rotaxane 1a showed a significant difference to Leigh’s rotaxane I [4]. Rotaxane I only presented two

• structures of (a) rotaxane 1a and (b) Leigh’s rotaxane I [4]. Selected H···O distances from the solid-state structures. Supporting Information Supporting Information File 71: Further experimental details and NMR spectra of new compounds. Supporting Information File 72: X-ray data of rotaxane 1a

Mechanochemical green synthesis of hyper-crosslinked cyclodextrin polymers

• Alberto Rubin Pedrazzo,
• Fabrizio Caldera,
• Marco Zanetti,
• Silvia Lucia Appleton,
• Nilesh Kumar Dhakar and
• Francesco Trotta

Beilstein J. Org. Chem. 2020, 16, 1554–1563, doi:10.3762/bjoc.16.127

• modifications of starch using ball milling have been reported. These included esterifications and etherifications of starch [19] and cellulose [20]. In 2017, Jicsinszky et al. obtained CD derivatives through a solid-state reaction, using a planetary ball mill [21][22] and by other green processes [23]. The main

Heterogeneous photocatalysis in flow chemical reactors

• Christopher G. Thomson,
• Ai-Lan Lee and
• Filipe Vilela

Beilstein J. Org. Chem. 2020, 16, 1495–1549, doi:10.3762/bjoc.16.125

• recommend exploring the article for further details [95]. Molecules with functional groups such as carboxylic acid present complex surface topologies from bridging and bidentate binding modes [91]. Yoshida and co-workers studied the adsorption of benzene derivatives on TiO2 surfaces by solid-state NMR and

Synthesis of new fluorescent molecules having an aggregation-induced emission property derived from 4-fluoroisoxazoles

• Kazuyuki Sato,
• Akira Kawasaki,
• Yukiko Karuo,
• Atsushi Tarui,
• Kentaro Kawai and
• Masaaki Omote

Beilstein J. Org. Chem. 2020, 16, 1411–1417, doi:10.3762/bjoc.16.117

• light ray and the structures often include fluorescein, rhodamine, or 7-amino-4-methylcoumarin (7-AMC) scaffolds as fluorophores. These fluorophores usually exhibit strong fluorescence in dilute solutions, but most of their emissions are partially or completely quenched in the solid state or in highly

• concentrated solutions by aggregation-caused quenching (ACQ) [8]. On the other hand, there are molecules that exhibit strong emission even in poor solvents or in the solid state. This property is referred to as aggregation-induced emission (AIE) and has attracted much attention in the field of fluorescence

Recent synthesis of thietanes

• Jiaxi Xu

Beilstein J. Org. Chem. 2020, 16, 1357–1410, doi:10.3762/bjoc.16.116

• photochemical [2 + 2] cycloaddition reaction was performed both in benzene solution and in the solid state, affording 78% yield with a ratio of syn/trans 8.7:1 and 61% de for syn-isomers at 15 °C in crystals, while no diastereoselectivity could be observed in benzene solution [16] (Scheme 72). In 2001, they

• 355a afforded the desired product 356a in 70% yield with 40% ee at −45 °C and 75% yield with 10% ee at 0 °C, respectively, in the solid state [98] (Scheme 73). Compared with cyclic thioetherification reactions, the photochemical cycloadditions of thiocarbonyl compounds and olefins are highly suitable

Synthesis and properties of quinazoline-based versatile exciplex-forming compounds

• Rasa Keruckiene,
• Simona Vekteryte,
• Ervinas Urbonas,
• Matas Guzauskas,
• Eigirdas Skuodis,
• Dmytro Volyniuk and
• Juozas V. Grazulevicius

Beilstein J. Org. Chem. 2020, 16, 1142–1153, doi:10.3762/bjoc.16.101

• ) which is usually detected for materials exhibiting low-intensity emissions [22][23]. Exciplex-forming properties Since compound 1 was characterized by the most blue-shifted fluorescence in the solid-state and a high first triplet energy level of 2.97 eV (Figure 5a and Figure 7a), this compound was

• regarded as a promising candidate for blue exciplex formation in the solid state. Indeed, compound 1 formed a sky-blue emitting exciplex (501 nm) in a solid mixture with the acceptor 2,4,6-tris[3-(diphenylphosphinyl)phenyl]-1,3,5-triazine (PO-T2T). Moreover, an orange exciplex emission with a PL spectrum

• , CDCl3) δ 8.28–8.22 (m, 2H), 8.16 (d, J = 9.1 Hz, 2H), 7.96–7.84 (m, 3H), 7.61 (dd, J = 9.5, 6.6 Hz, 4H), 6.94 (tt, J = 8.6, 2.4 Hz, 1H); 13C NMR (101 MHz, CDCl3) δ 165.01, 161.01, 156.01, 149.40, 134.00, 133.90, 133.10, 129.24, 128.8, 128.66, 127.76, 127.4, 127.14, 104.70; ATR-IR (solid state on ATR, cm

Synthesis of esters of diaminotruxillic bis-amino acids by Pd-mediated photocycloaddition of analogs of the Kaede protein chromophore

• Esteban P. Urriolabeitia,
• Pablo Sánchez,
• Alexandra Pop,
• Cristian Silvestru,
• Eduardo Laga,
• Ana I. Jiménez and
• Carlos Cativiela

Beilstein J. Org. Chem. 2020, 16, 1111–1123, doi:10.3762/bjoc.16.98

• ][21]. Another drawback of these reactions is the selectivity, because good selectivity is achieved in photocycloadditions in solid state provided that the topochemical Schmidt's conditions are met [22][23][24], but the selectivity in solution is usually not as high [25][26]. Our group is interested in

Aryl-substituted acridanes as hosts for TADF-based OLEDs

• Naveen Masimukku,
• Dalius Gudeika,
• Oleksandr Bezvikonnyi,
• Ihor Syvorotka,
• Rasa Keruckiene,
• Dmytro Volyniuk and
• Juozas V. Grazulevicius

Beilstein J. Org. Chem. 2020, 16, 989–1000, doi:10.3762/bjoc.16.88

• from the acridan unit. Slightly higher IPPES values were obtained by PES measurements for compounds 3–6 in comparison to those estimated by CV and can apparently be explained by a more difficult removal of electrons from materials in the solid state than in solution due to the strong intermolecular

Synthesis of new asparagine-based glycopeptides for future scanning tunneling microscopy investigations

• Laura Sršan and
• Thomas Ziegler

Beilstein J. Org. Chem. 2020, 16, 888–894, doi:10.3762/bjoc.16.80

• for Solid State Research for help in the field of ES-IBD. We also thank http://www.pixabay.com for providing parts of our graphical abstract. Funding We would like to thank the Baden-Württemberg Stiftung for financial support.

Towards triptycene functionalization and triptycene-linked porphyrin arrays

• Gemma M. Locke,
• Keith J. Flanagan and
• Mathias O. Senge

Beilstein J. Org. Chem. 2020, 16, 763–777, doi:10.3762/bjoc.16.70

• the tight packing observed for the homo π-stacking. Similarly, a mixture between the homo and hetero π-stacking would cause a more amorphous crystal and would be the least likely to form in a solid state a crystal suitable for determination by X-ray diffraction. The driving force for this crystal

Synthesis of C₇₀-fragment buckybowls bearing alkoxy substituents

• Yumi Yakiyama,
• Shota Hishikawa and
• Hidehiro Sakurai

Beilstein J. Org. Chem. 2020, 16, 681–690, doi:10.3762/bjoc.16.66

• revealed there nature in the solid state to form a 1-dimensional columnar structure stabilised by π–π and/or CH∙∙∙π interactions with full or partial overlap of the molecular skeleton as seen in the crystal structure of 1, however, each packing fashion is different depending on the substituent. UV–vis and