Design, synthesis and biological evaluation of immunostimulating mannosylated desmuramyl peptides

• Rosana Ribić,
• Ranko Stojković,
• Lidija Milković,
• Mariastefania Antica,
• Marko Cigler and
• Srđanka Tomić

Beilstein J. Org. Chem. 2019, 15, 1805–1814, doi:10.3762/bjoc.15.174

• was separated from the isomer mixture using silica gel column chromatography and CHCl3/MeOH 1:1 as eluent. The spectral data of the isolated isomer 4 were compared to the published ᴅ-AdGly-ʟ-Ala-ᴅ-isoGln prepared from tripeptide tert-butyl ester [21]. Desmuramyl peptides 1 and 4 were further used for

• substitution of bromine from tert-butyl bromoacetate with 2,3,4,6-tetra-O-acetyl-α-ᴅ-mannopyranose (9) in the presence of potassium carbonate followed. Chemoselective removal of the tert-butyl ester group from compound 10 resulted with O-mannoside 11 with a free carboxy group available for coupling of the

• peptide moieties. The tert-butyl deprotection was accomplished using a selective reagent, trifluoroacetic acid (TFA). Side products derived from deacetylation of compound 10 have not been detected. The synthesis of benzyl-protected α-mannoside containing a (R)-hydroxyisobutyryl linker was previously

N-(1-Phenylethyl)aziridine-2-carboxylate esters in the synthesis of biologically relevant compounds

• Iwona E. Głowacka,
• Aleksandra Trocha,
• Andrzej E. Wróblewski and
• Dorota G. Piotrowska

Beilstein J. Org. Chem. 2019, 15, 1722–1757, doi:10.3762/bjoc.15.168

• [16][18][19], isopropyl 5c [16] and tert-butyl 5d [16][20] as well as for 4-methoxyphenyl ester 5e [21]. However, the corresponding (−)-menthyl esters (2R,1'R)-5f and (2S,1'R)-5f were separated by solvent-driven selective crystallization at low-temperature from ethanol and hexane, respectively. The

• both pairs of ethyl esters [26]. When a mixture of tert-butyl esters (2R,1'S)-5d and (2S,1'S)-5d was subjected to kinetic resolution in the presence of potassium tert-butoxide in tetrahydrofuran (2R,1'S)-5d was produced with low 40% de [27]. The absolute configuration at C2 in esters 5 was established

• ,1′S)-5b (Scheme 38) [91]. A two-carbon fragment came from tert-butyl acetate while the required R configuration at C3 in the final product was secured by stereoselective reduction (10:1) of the ketone (2R,1′S)-149 to give the aziridine alcohol (2R,1′R,1''S)-150 as the major product. Silylation of

Recent advances on the transition-metal-catalyzed synthesis of imidazopyridines: an updated coverage

• Gagandeep Kour Reen,
• Ashok Kumar and
• Pratibha Sharma

Beilstein J. Org. Chem. 2019, 15, 1612–1704, doi:10.3762/bjoc.15.165

A novel three-component reaction between isocyanides, alcohols or thiols and elemental sulfur: a mild, catalyst-free approach towards O-thiocarbamates and dithiocarbamates

• András György Németh,
• György Miklós Keserű and
• Péter Ábrányi-Balogh

Beilstein J. Org. Chem. 2019, 15, 1523–1533, doi:10.3762/bjoc.15.155

• (MeTHF) proved to be suitable alternatives to THF (Table 1, entries 13 and 15) that might be advantageous considering the wide application of these solvents in industrial production [89][90]. On the contrary, the use of dioxane, methyl tert-butyl ether (MTBE), toluene or dichloromethane (DCM) was

Formation of an unexpected 3,3-diphenyl-3H-indazole through a facile intramolecular [2 + 3] cycloaddition of the diazo intermediate

• Andrew T. King,
• Hugh G. Hiscocks,
• Lidia Matesic,
• Mohan Bhadbhade,
• Roger Bishop and
• Alison T. Ung

Beilstein J. Org. Chem. 2019, 15, 1347–1354, doi:10.3762/bjoc.15.134

• structures stabilised by multiple tert-butyl groups [20][21], multi-ring cage hydrocarbons [22][23], and linear alkanes [22][23]. The interaction was found to be attractive in all these cases, and computational justifications have been published [21][23]. It, therefore, appears probable that, despite their

• ) 2,6-Bis(diphenylmethyl)-4-methoxyaniline (5, 0.23 g, 0.505 mmol, 1 equiv) DABSO (0.57 g, 2.37 mmol, 4.75 equiv) and BTEAC (0.12 g, 1 mmol, 1 equiv) were dissolved in DCM (5 mL, solution A) that had been cooled to 0 °C. tert-Butyl nitrite (0.15 g, 170 μL) was dissolved in DCM (6 mL) and cooled to 0 °C

• ) then cooled to 0 °C (solution A). tert-Butyl nitrite (0.15 g, 170 μL) was dissolved in DCM (6 mL) and cooled to 0 °C (solution B). Copper(II) chloride (0.02 g, 0.10 mmol, 0.2 equiv), was dissolved in acetonitrile (6 mL) with sonication and cooled to 0 °C (solution C). Once all solutions had been cooled

Mechanochemical Friedel–Crafts acylations

• Mateja Đud,
• Anamarija Briš,
• Iva Jušinski,
• Davor Gracin and
• Davor Margetić

Beilstein J. Org. Chem. 2019, 15, 1313–1320, doi:10.3762/bjoc.15.130

• anhydride poorly reacted with pyrene, but the reaction proceeds well with the more reactive biphenyl (69%, see Supporting Information File 1). Di-tert-butyl dicarbonate and 4-nitrobenzoyl chloride were unreactive under ball-milling conditions. Similary unreactive was 4-nitrophthalic anhydride, which only in

Steroid diversification by multicomponent reactions

• Leslie Reguera,
• Cecilia I. Attorresi,
• Javier A. Ramírez and
• Daniel G. Rivera

Beilstein J. Org. Chem. 2019, 15, 1236–1256, doi:10.3762/bjoc.15.121

• al. [33] describing the participation of a nitrosteroid and an acylating agent in a novel isocyanide-based MCR. Thus, the reaction of a nitrosteroid – derived from 16-dehydropregnenalone – with acetic anhydride and tert-butyl isocyanide furnished an acetyl α-oximinoamide moiety at the steroidal side

Insertion of [1.1.1]propellane into aromatic disulfides

• Robin M. Bär,
• Gregor Heinrich,
• Martin Nieger,
• Olaf Fuhr and
• Stefan Bräse

Beilstein J. Org. Chem. 2019, 15, 1172–1180, doi:10.3762/bjoc.15.114

• internal standard was added. In the dark, no conversion could be observed at all. The exposure to daylight led to a conversion of less than 10% after 1 h. With a 500 W halogen lamp, 90% of the starting material was consumed after 1 h. By the addition of di-tert-butyl peroxide (DTBP) as a radical initiator

• particularly interesting if the two sulfides of the product can be modified individually. This approach to unsymmetrically substituted BCPs will be further investigated. Optimization of the reaction conditions. The relative conversion was determined by GC–MS. The use of a radical initiator (di-tert-butyl

Synthesis of aryl cyclopropyl sulfides through copper-promoted S-cyclopropylation of thiophenols using cyclopropylboronic acid

• Emeline Benoit,
• Ahmed Fnaiche and
• Alexandre Gagnon

Beilstein J. Org. Chem. 2019, 15, 1162–1171, doi:10.3762/bjoc.15.113

• 1 and diaryl disulfide 26 as a side-product. (4-(tert-Butyl)phenyl)(cyclopropyl)sulfane (1a) and 1,2-bis(4-(tert-butyl)phenyl)disulfane (26a). The general procedure was followed on 0.425 mmol scale starting from 4-(tert-butyl)benzenethiol (14a). The residue was purified on silica gel (100% Hex) to

Multicomponent reactions (MCRs): a useful access to the synthesis of benzo-fused γ-lactams

• Edorta Martínez de Marigorta,
• Jesús M. de Los Santos,
• Ana M. Ochoa de Retana,
• Javier Vicario and
• Francisco Palacios

Beilstein J. Org. Chem. 2019, 15, 1065–1085, doi:10.3762/bjoc.15.104

• most of the cases, the Z-isomer as the sole or main product, while tert-butyl derivatives gave the E-isomer selectively. On the secondary amine side, morpholine, piperidine, pyrrolidine and dibutylamine all rendered the reaction efficiently. A plausible explanation for the mechanism of this

• , 2-bromobenzaldehydes 62 and carbon monoxide (23) at atmospheric pressure, with the assistance of DABCO as base and tri(tert-butyl)phosphonium tetrafluoroborate as ligand (Scheme 19) [100]. A variety of substituents in the benzene rings (R1, R3) are compatible with the reaction conditions, but

A chemically contiguous hapten approach for a heroin–fentanyl vaccine

• Yoshihiro Natori,
• Candy S. Hwang,
• Lucy Lin,
• Lauren C. Smith,
• Bin Zhou and
• Kim D. Janda

Beilstein J. Org. Chem. 2019, 15, 1020–1031, doi:10.3762/bjoc.15.100

• , norheroin (1, Figure 3). Thus, norheroin (1) was synthesized according to literature procedure and purified by recrystallization [16]. Alkylation of 1 with tert-butyl bromoacetate and subsequent deprotection with trifluoroacetic acid yielded the N-glycine derivative of norheroin, 16. This critical

• tert-butyl ester protected derivative 4 of the commercially available 4-(4-aminophenyl)butanoic acid was accessed via protection and deprotection of the amine with a phthaloyl group (intermediates 2, 3). Reductive amination of 4 with commercially available phenethylpiperidin-4-one furnished

• corresponding alkene resulted in a mixture of products. We opted to try the synthesis of HF-2 by 1,4-addition, rather than reductive amination. Thus, intermediate 5 was acylated with acryloyl chloride to give the α,β-unsaturated intermediate 10 (Scheme 1). Condensation with a tert-butyl-protected glycine

Heck- and Suzuki-coupling approaches to novel hydroquinone inhibitors of calcium ATPase

• Robert J. Kempton,
• Taylor A. Kidd-Kautz,
• Soizic Laurenceau and
• Stefan Paula

Beilstein J. Org. Chem. 2019, 15, 971–975, doi:10.3762/bjoc.15.94

• nanomolar range), but offers advantages such as ease of synthesis and greatly reduced cost. Recent synthetic work from our group has shown that the tert-butyl groups of BHQ can be replaced by a variety of alkyl and cycloalkyl groups with minimal reduction in potency [7][8][9]. In fact, the 2,5-bis(1

• ) suggesting the presence of a small amount of the 3-tert-butyl isomer. The corresponding iodo analogue 5b was prepared following the procedure of Hayashi [14]. Although both halides 5a and 5b were now available to us, subsequent experiments determined that the iodo analogue offered us no advantage over the

Catalytic asymmetric oxo-Diels–Alder reactions with chiral atropisomeric biphenyl diols

• Chi-Tung Yeung,
• Wesley Ting Kwok Chan,
• Wai-Sum Lo,
• Ga-Lai Law and
• Wing-Tak Wong

Beilstein J. Org. Chem. 2019, 15, 955–962, doi:10.3762/bjoc.15.92

• used as catalysts (Table 1, entries 8–11). With 1, the yield and enantioselectivity of the catalytic product (2,3-dihydro-2-tert-butyl-4H-pyran-4-one) were 50% and 12% ee (Table 1, entry 8). The reactivity and enantioselectivity were significantly increased to 66% yield and 72% ee when 2 was employed

Synthesis of (macro)heterocycles by consecutive/repetitive isocyanide-based multicomponent reactions

• Angélica de Fátima S. Barreto and
• Carlos Kleber Z. Andrade

Beilstein J. Org. Chem. 2019, 15, 906–930, doi:10.3762/bjoc.15.88

• and Constabel [17] who developed a solid phase strategy to obtain tetrazoles and hydantoinimide derivatives successfully (Scheme 2). In each case, the synthetic sequence began with a classical Ugi reaction between N-Fmoc glycine (1), isobutyraldehyde (2) and tert-butyl isocyanide (4) in the presence

• acid 144, Cbz removal of the macrocycle 145 formed led to another diamine intermediate that was involved in a second double Ugi reaction with paraformaldehyde, tert-butyl isocyanide and diacid 146, to yield cryptand 147 in 31% overall yield from 130. Other macroheterocycles were synthesized in this

Photochemical generation of the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical from caged nitroxides by near-infrared two-photon irradiation and its cytocidal effect on lung cancer cells

• Ayato Yamada,
• Manabu Abe,
• Yoshinobu Nishimura,
• Shoji Ishizaka,
• Masashi Namba,
• Taku Nakashima,
• Kiyofumi Shimoji and
• Noboru Hattori

Beilstein J. Org. Chem. 2019, 15, 863–873, doi:10.3762/bjoc.15.84

• -iodo-4-nitrobenzene (3) [68]. The TEMPO moiety was introduced at the benzylic position of 5a and 5b using the copper-catalyzed radical reaction in the presence of tert-butyl hydroperoxide (TBHP) to afford 2a and 2b in 38% and 52% yield, respectively [69]. The caged TEMPOs 2a and 2b were thermally

Coordination chemistry and photoswitching of dinuclear macrocyclic cadmium-, nickel-, and zinc complexes containing azobenzene carboxylato co-ligands

• Jennifer Klose,
• Tobias Severin,
• Peter Hahn,
• Alexander Jeremies,
• Jens Bergmann,
• Daniel Fuhrmann,
• Jan Griebel,
• Bernd Abel and
• Berthold Kersting

Beilstein J. Org. Chem. 2019, 15, 840–851, doi:10.3762/bjoc.15.81

• solution. Thus, the six N-methyl groups give rise to two singlets (one for the methyl protons on the benzylic nitrogen atoms (NBzCH3) and one for the methyl protons on the central amine nitrogen of the linking diethylenetriamine units (NCH3)). Note that the four aromatic protons (ArH) and the tert-butyl

Solid-phase synthesis of biaryl bicyclic peptides containing a 3-aryltyrosine or a 4-arylphenylalanine moiety

• Iteng Ng-Choi,
• Àngel Oliveras,
• Lidia Feliu and
• Marta Planas

Beilstein J. Org. Chem. 2019, 15, 761–768, doi:10.3762/bjoc.15.72

• 9-fluorenylmethoxycarbonyl (Fmoc)/tert-butyl (t-Bu) strategy (Scheme 2). The non-commercially available amino acids Boc-Phe(4-BPin)-OH, Fmoc-Phe(4-I)-OH and Fmoc-Glu-OpNB were prepared in solution. Boc-Phe(4-BPin)-OH was obtained from Boc-Phe(4-I)-OH [27] through esterification, Miyaura borylation

Diastereo- and enantioselective preparation of cyclopropanol derivatives

• Marwan Simaan and
• Ilan Marek

Beilstein J. Org. Chem. 2019, 15, 752–760, doi:10.3762/bjoc.15.71

• stirred until TLC shows complete consumption of the starting material (eluent hexane/EtOAc 9:1, ca. 30 min). The oxenoid was prepared in a different flask by slowly adding n-BuLi (1.2 equiv) to a solution of tert-butyl hydroperoxide (2 equiv) in THF (5 mL/2 mmol) at −80 °C. After 30 min at −80 °C, the

Synthesis of functionalized diazocines for application as building blocks in photo- and mechanoresponsive materials

• Widukind Moormann,
• Daniel Langbehn and
• Rainer Herges

Beilstein J. Org. Chem. 2019, 15, 727–732, doi:10.3762/bjoc.15.68

• step the hydroxy groups in 8a and 8b were protected as tert-butyl ethers (Scheme 2) to prevent oxidation in the following oxidative C–C coupling [31]. The tert-butyl ether was chosen as the protecting group because it is stable towards the oxidizing conditions of the C–C coupling reactions and the

• reducing conditions of the azo cyclization. Moreover, the tert-butyl group can be conveniently removed under acidic conditions. As described in [27] potassium butoxide is used as a non-nucleophilic base to remove the α-toluene protons of 9a and 9b. By addition of bromine as an oxidizing agent dimers 10a

The LANCA three-component reaction to highly substituted β-ketoenamides – versatile intermediates for the synthesis of functionalized pyridine, pyrimidine, oxazole and quinoxaline derivatives

• Tilman Lechel,
• Roopender Kumar,
• Mrinal K. Bera,
• Reinhold Zimmer and
• Hans-Ulrich Reissig

Beilstein J. Org. Chem. 2019, 15, 655–678, doi:10.3762/bjoc.15.61

• detected in the crude product. The reactions of β-ketoenamides KE60, KE61 and KE68 (R2 = tert-butyl or adamantanyl, R3 = methyl, trifluoromethyl or cyclopropyl) provided mixtures of oxazoles OX7, OX8 and OX10, respectively, and of 1,2-diketones DK4, DK5 and DK11 (Table 6, entries 9, 10, and 16). For

Polyaminoazide mixtures for the synthesis of pH-responsive calixarene nanosponges

• Antonella Di Vincenzo,
• Antonio Palumbo Piccionello,
• Alberto Spinella,
• Delia Chillura Martino,
• Marco Russo and
• Paolo Lo Meo

Beilstein J. Org. Chem. 2019, 15, 633–641, doi:10.3762/bjoc.15.59

• ) of polyaminoazide mixtures, which were in turn used for the preparation of CaNSs materials with pH-tunable properties, by reaction with the (5,11,17,23-tetra(tert-butyl))-(25,26,27,28-tetrakis(propargyloxy)calix[4]arene (Ca) under the CuAAC reaction conditions. In turn, the synthon Ca is obtained by

• reacting the parent (5,11,17,23-tetra(tert-butyl))-(25,26,27,28-tetrahydroxy)calix[4]arene with an excess of propargyl bromide (see Scheme 1). The pH-dependent abilities of the relevant calixarene-based polymeric materials obtained were finally tested towards some suitable organic guests, suitably selected

• ppm, the deconvolution analysis of which reveals constituted by the superimposition of at least three different signals, accounting for the tert-butyl groups and the methylene bridges of the calixarene units, together with the central methylene groups of the -(CH2)3- chains present in the

Design and synthesis of multivalent α-1,2-trimannose-linked bioerodible microparticles for applications in immune response studies of Leishmania major infection

• Chelsea L. Rintelmann,
• Tara Grinnage-Pulley,
• Kathleen Ross,
• Daniel E. K. Kabotso,
• Angela Toepp,
• Anne Cowell,
• Christine Petersen,
• Balaji Narasimhan and
• Nicola Pohl

Beilstein J. Org. Chem. 2019, 15, 623–632, doi:10.3762/bjoc.15.58

• was selectively hydrolyzed with CH2Cl2/TFE/AcOH 3:1:1 and trapped by triethylsilane, providing free amine 23 [54]. At this point, the epsilon amine 23 was coupled with TAMRA-NHS, followed by acidic deprotection of the tert-butyl esters to afford the triacid 25. Then, the successful coupling of the

Selective benzylic C–H monooxygenation mediated by iodine oxides

• Kelsey B. LaMartina,
• Haley K. Kuck,
• Linda S. Oglesbee,
• Asma Al-Odaini and
• Nicholas C. Boaz

Beilstein J. Org. Chem. 2019, 15, 602–609, doi:10.3762/bjoc.15.55

• oxidation is only a net 2 electron process. Previous research shows that the rate of radical trapping by molecular iodine nears diffusion control, similar to that of diatomic oxygen [68][69][70]. This process of radical trapping was probed through the pyrolysis of tert-butyl 2-(naphthalen-1-yl

Synthesis of the polyketide section of seragamide A and related cyclodepsipeptides via Negishi cross coupling

• Jan Hendrik Lang and
• Thomas Lindel

Beilstein J. Org. Chem. 2019, 15, 577–583, doi:10.3762/bjoc.15.53

• )-propylene oxide. The C4–C5 double bond would be formed by Corey–Fuchs reaction. Reaction of the aluminium enolate of tert-butyl propionate (9, Scheme 2) with (S)-propylene oxide had provided Taylor et al. with a mixture of diastereomers of α-methylated γ-hydroxyester 11 favouring the (2S,4S)-syn over the

• treated tert-butyl propionate (9) with LDA/Et2AlCl (Scheme 2). Performing the reaction at −78 °C instead of −40 °C unexpectedly diminished the dr, which is in agreement with results by Liu, Petersen and co-workers [37]. The analogous reaction of adamantyl ester 10 (obtained from adamantan-1-ol and

• tert-butyl ester 13a to the alcohol by portionwise addition of DIBAL and careful temperature control (slow warm-up from −78 to −30 °C) afforded the alcohol without α-epimerization, which was oxidized to aldehyde 15 (IBX, Scheme 3). Adamantyl ester 14 resisted reduction under the same conditions and was

Dirhodium(II)-catalyzed [3 + 2] cycloaddition of N-arylaminocyclopropane with alkyne derivatives

• Wentong Liu,
• Yi Kuang,
• Zhifan Wang,
• Jin Zhu and
• Yuanhua Wang

Beilstein J. Org. Chem. 2019, 15, 542–550, doi:10.3762/bjoc.15.48

• effect on the aromatic ring of 1 influences the results of the reactions. Compound 1 with electron-donating groups, such as methoxy, tert-butyl, and methyl groups, all reacted smoothly to produce products with good yields (Table 2, entries 1–3). The cyclization of substrate 1 containing electron