CuAAC-inspired synthesis of 1,2,3-triazole-bridged porphyrin conjugates: an overview

• Dileep Kumar Singh

Beilstein J. Org. Chem. 2023, 19, 349–379, doi:10.3762/bjoc.19.29

• -dipolar cycloaddition reaction between an azide and a terminal alkyne, also popular as "click reaction" or CuAAC reaction. Moreover, the 1,2,3-triazole ring also serves as a spacer and an electron transfer bridge between the porphyrin and the attached chromophores. In order to provide a critical overview

• of the synthesis and properties of various porphyrin-triazole hybrids, this review will discuss some of the key reactions involved in the preparation of triazole-linked porphyrin conjugates. Keywords: azide–alkyne; click chemistry; CuAAC; 1,3-dipolar cycloaddition; porphyrin; 1,2,3-triazole

• ], nanoscience [12], and materials research [13][14]. Moreover, this review describes the use of the click methodology for the construction of various β- and meso-substituted 1,2,3-triazoloporphyrins by using azide or alkyne-substituted porphyrin as substrate (Figure 2). Every example mentioned in this review

Continuous flow synthesis of 6-monoamino-6-monodeoxy-β-cyclodextrin

• János Máté Orosz,
• Dóra Ujj,
• Petr Kasal,
• Gábor Benkovics and
• Erika Bálint

Beilstein J. Org. Chem. 2023, 19, 294–302, doi:10.3762/bjoc.19.25

• the other hand, sodium azide in N,N-dimethylformamide (DMF) reacts with mono-6-O-tosyl-CDs to give CD monoazides in high yields. The obtained mono(6-azido-6-deoxy)-CDs (N3-CDs) are valuable precursors that can be used as starting materials in azide–alkyne click reactions; furthermore, they can be

• industrial processes. Batch synthesis of 6A-azido-6A-deoxy-β-CD (N3-β-CD) (3) Substitution of the p-toluenesulfonyl group of Ts-β-CD (2) by azide can be carried out in water [40][41], DMF [14][42], or in their combination [43][44] at elevated temperatures. Water is preferred over DMF due to its lower cost

• the tosyl–azide substitution was optimized (Scheme 2). First, the best solvent was sought. Unfortunately, practically no reaction took place when the same solvent was used as for the tosylation reaction (Table 2, entries 1–4), so we had to evaporate the solution exiting the first flow reaction, and

Revisiting the bromination of 3β-hydroxycholest-5-ene with CBr₄/PPh₃ and the subsequent azidolysis of the resulting bromide, disparity in stereochemical behavior

• Christian Schumacher,
• Jas S. Ward,
• Kari Rissanen,
• Carsten Bolm and
• Mohamed Ramadan El Sayed Aly

Beilstein J. Org. Chem. 2023, 19, 91–99, doi:10.3762/bjoc.19.9

• retention of configuration at C3 [17]. In 2008, a direct dehydroxyazidation of cholesterol by treatment of the steroid with a zinc azide–pyridine complex, diisopropyl azodicarboxylate (DIAD), and PPh3 was described [18]. This Mitsunobu-like reaction occurred with complete inversion at C3 to afford 3α

• . Stereospecific reaction of 11 with bromide as nucleophile leads to 4, in which the halo substituent is located on the β-side of the molecule. Treatment of 4 with NaN3 in DMF at 90–100 °C provides predominantly azide 5 [23]. This reaction has a high stereospecificity as well, proceeding mostly with inversion of

Inline purification in continuous flow synthesis – opportunities and challenges

• Jorge García-Lacuna and
• Marcus Baumann

Beilstein J. Org. Chem. 2022, 18, 1720–1740, doi:10.3762/bjoc.18.182

• -butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine on polystyrene) which is valuable for reaction scale-ups [75] is used. Alternatively, a CuAAc (copper-catalyzed azide–alkyne cycloaddition) reaction has been demonstrated where the copper catalyst is supported on an Amberlist A-21 resin

A novel bis-triazole scaffold accessed via two tandem [3 + 2] cycloaddition events including an uncatalyzed, room temperature azide–alkyne click reaction

• Ksenia Malkova,
• Andrey Bubyrev,
• Vasilisa Krivovicheva,
• Dmitry Dar’in,
• Alexander Bunev and
• Mikhail Krasavin

Beilstein J. Org. Chem. 2022, 18, 1636–1641, doi:10.3762/bjoc.18.175

• University, Kaliningrad 236016, Russian Federation 10.3762/bjoc.18.175 Abstract The previously described α-acetyl-α-diazomethanesulfonamide was employed in a three-component reaction with azide-containing benzaldehydes and propargylamines. Besides the initial formation of the triazole core, the reaction

• proceeded further, in uncatalyzed fashion at room temperature and yielded, after intramolecular azide–alkyne click reaction novel, structurally intriguing bistriazoles. Keywords: α-acetyl-α-diazomethane sulfonamide; intramolecular click reaction; uncatalyzed; room temperature; 1,2,3-triazoles

• molecular scaffold. Pondering various opportunities for post-condensational modifications of the 1,5-disubstituted 1,2,3-triazole core according to this strategy, we turned our attention to such powerful transformation as the azide–alkyne [3 + 2] cycloaddition (also known as the azide–alkyne click reaction

Preparation of β-cyclodextrin-based dimers with selectively methylated rims and their use for solubilization of tetracene

• Konstantin Lebedinskiy,
• Volodymyr Lobaz and
• Jindřich Jindřich

Beilstein J. Org. Chem. 2022, 18, 1596–1606, doi:10.3762/bjoc.18.170

• kind of reaction engaging the azido group in the CD chemistry is the phosphine imide reaction [30][31]. This transformation involves triphenylphosphine and carbon dioxide to convert azide into isocyanate [31], allowing coupling with amines or other nucleophile groups. It is interesting to note that the

Efficient synthesis of aziridinecyclooctanediol and 3-aminocyclooctanetriol

• Emine Salamci and
• Ayse Kilic Lafzi

Beilstein J. Org. Chem. 2022, 18, 1539–1543, doi:10.3762/bjoc.18.163

• )cyclooctane-1,2-diyl dimethanesulfonate. Reaction of the bis(benzyloxy)cyclooctane-1,2-diyl dimethanesulfonate with NaN3 gave 2-azido-3,8-bis(benzyloxy)cyclooctyl methanesulfonate. Reduction of the azide group and debenzylation to give an amine provided the new 3-aminocyclooctanetriol. Treatment of the 2

• . This difference is due to the occurrence of dynamic balance when the system is heated. A general and versatile method for the synthesis of azides involves the reaction of a mesylate with sodium azide. Therefore, the dimesylate 8 was first reacted with an excess of sodium azide in DMF at 105 °C to give

• the diazide 9 (Scheme 2). However, the product was determined to be the azidomesylate 10 instead of the expected diazide 9 based on NMR spectroscopy. The position of the azide functionality in 10 was determined from its COSY spectrum. The diagonal peak at 3.97 ppm has cross peaks with the protons

New triazole-substituted triterpene derivatives exhibiting anti-RSV activity: synthesis, biological evaluation, and molecular modeling

• Elenilson F. da Silva,
• Krist Helen Antunes Fernandes,
• Denise Diedrich,
• Jessica Gotardi,
• Marcia Silvana Freire Franco,
• Carlos Henrique Tomich de Paula da Silva,
• Ana Paula Duarte de Souza and
• Simone Cristina Baggio Gnoatto

Beilstein J. Org. Chem. 2022, 18, 1524–1531, doi:10.3762/bjoc.18.161

• resulted in the synthesis of derivatives 3 and 4, with 90 and 83% yield, respectively (Scheme 2). The C-28-propargylated triterpene esters (5 and 6, 70% yield for both) of the acetate derivatives (3 and 4) were obtained. Finally, the reaction of derivatives 5 and 6 with meta-nitro-substituted azide (c

Synthesis of C6-modified mannose 1-phosphates and evaluation of derived sugar nucleotides against GDP-mannose dehydrogenase

• Sanaz Ahmadipour,
• Alice J. C. Wahart,
• Jonathan P. Dolan,
• Laura Beswick,
• Chris S. Hawes,
• Robert A. Field and
• Gavin J. Miller

Beilstein J. Org. Chem. 2022, 18, 1379–1384, doi:10.3762/bjoc.18.142

• , syntheses of C6-modified mannose 1-phosphates 13 and 17 were developed (Scheme 1). The synthesis of 6-amino-6-deoxymannose 1-phosphate 13 started from protected thioglycoside 10 [6]. A two-step modification using Appel halogenation followed by nucleophilic substitution with azide furnished 11. Conversion of

• deprotection with concomitant azide reduction was completed using hydrogen and Pd/C and Pd(OH)2/C catalysts, affording 13 as the disodium salt in 90% yield, after anion exchange chromatography. Synthesis of 6-deoxy-6-thio-ᴅ-mannose 1-phosphate (18) was completed from 14 via C6 substitution with thioacetate and

Computational model predicts protein binding sites of a luminescent ligand equipped with guanidiniocarbonyl-pyrrole groups

• Neda Rafieiolhosseini,
• Matthias Killa,
• Thorben Neumann,
• Niklas Tötsch,
• Jean-Noël Grad,
• Alexander Höing,
• Thies Dirksmeyer,
• Jochen Niemeyer,
• Christian Ottmann,
• Shirley K. Knauer,
• Michael Giese,
• Jens Voskuhl and
• Daniel Hoffmann

Beilstein J. Org. Chem. 2022, 18, 1322–1331, doi:10.3762/bjoc.18.137

• potential supramolecular ligand for 14-3-3ζ. We synthesized a GCP-Lys dimer coupled via Cu(I)-catalyzed click reaction to the chosen emitter equipped with two azide functions (Figure 1 and Supporting Information File 1) and investigated the photophysical properties in detail (Supporting Information File 1

• : PDB2PQR output for GCP. Acknowledgements Steffen Riebe and Jan Balszuweit are acknowledged for support during the synthesis and analysis of the azide precursor. Ali Khaleghzadegan and Daniel Habermann are warmly appreciated for their help and advice in tuning and optimizing the code performance. Funding

Scope of tetrazolo[1,5-a]quinoxalines in CuAAC reactions for the synthesis of triazoloquinoxalines, imidazoloquinoxalines, and rhenium complexes thereof

• Laura Holzhauer,
• Chloé Liagre,
• Olaf Fuhr,
• Nicole Jung and
• Stefan Bräse

Beilstein J. Org. Chem. 2022, 18, 1088–1099, doi:10.3762/bjoc.18.111

• and OLED compounds [7][8][9]. Amongst many other possible ways to modify and extend the core structure of quinoxalines, the conversion of tetrazolo[1,5-a]quinoxalines offers several advantages, as tetrazolo[1,5-a]quinoxalines can be used as quinoxaline-azide precursor, serving as a precursor for new

• nitrogen-enriched quinoxaline-based structures. Literature-known procedures for such a quinoxaline modification starting from tetrazolo[1,5-a]quinoxalines 1 are the synthesis of 1,2,3-triazoloquinoxalines 3 via copper-catalyzed azide–alkyne cycloaddition (CuAAC) [10] and the synthesis of imidazo[1,2-a

• 1,2,3-triazoloquinoxalines 3 and imidazo[1,2-a]quinoxalines 2 under conditions known for copper-catalyzed azide–alkyne cycloaddition (CuAAC) [10]. The currently published porphyrin-catalyzed process requires glovebox conditions and the use of an expensive catalyst [11]. We intend to elucidate the

Facile and diastereoselective arylation of the privileged 1,4-dihydroisoquinolin-3(2H)-one scaffold

• Dmitry Dar’in,
• Grigory Kantin,
• Alexander Bunev and
• Mikhail Krasavin

Beilstein J. Org. Chem. 2022, 18, 1070–1078, doi:10.3762/bjoc.18.109

• (Danheiser method [22]) or ethoxalylation [23]. Fortunately, all of the substrates 11a–s were converted cleanly and smoothly over 2–5 days into their diazo derivatives 10a–s using p-(acetamido)benzenesulfonyl azide (p-ABSA) as the diazo group donor [24] and DBU as the base. The yields of diazo compounds 10

Electrochemical vicinal oxyazidation of α-arylvinyl acetates

• Yi-Lun Li,
• Zhaojiang Shi,
• Tao Shen and
• Ke-Yin Ye

Beilstein J. Org. Chem. 2022, 18, 1026–1031, doi:10.3762/bjoc.18.103

• diverse α-azidoketones in good yields without the use of a stoichiometric amount of chemical oxidant. A range of functionality is shown to be compatible with this transformation, and further applications are demonstrated. Keywords: azide; azidoketone; electrosynthesis; enol acetate; radical

• development of a green, efficient, and sustainable protocol for the synthesis of azidoketones is of great significance [7][8][9]. Retrosynthetically, the nucleophilic substitution of α-bromoketones by sodium azide [10] and oxidation of the azido alcohols [11] are among the most straightforward methods to

Synthetic strategies for the preparation of γ-phostams: 1,2-azaphospholidine 2-oxides and 1,2-azaphospholine 2-oxides

• Jiaxi Xu

Beilstein J. Org. Chem. 2022, 18, 889–915, doi:10.3762/bjoc.18.90

• [24]. Both monomesityl and dimesitylphosphinyl azides 14 generated 2,3-dihydrobenzo[c][1,2]azaphosphole 1-oxides 15 in 31% and 20%, respectively, via an intramolecular nitrene C–H insertion, for dimesitylphosphinyl azide (14b), with 51% yield of phosphonamidate 16 as byproduct. Bis(2,4,6

• -triisopropylphenyl)phosphinyl azide (17) gave the corresponding 2,3-dihydrobenzo[c][1,2]azaphosphole 1-oxide 18 in 51% and phosphonamidate 19 in 28% yield (Scheme 4). The synthetic method was applied occasionally [24]. P-Stereogenic 3-arylmethylidene-2,3-dihydrobenzo[c][1,2]azaphosphole 1-oxides 21 and 23 were

Synthesis of novel alkynyl imidazopyridinyl selenides: copper-catalyzed tandem selenation of selenium with 2-arylimidazo[1,2-a]pyridines and terminal alkynes

• Mio Matsumura,
• Kaho Tsukada,
• Kiwa Sugimoto,
• Yuki Murata and
• Shuji Yasuike

Beilstein J. Org. Chem. 2022, 18, 863–871, doi:10.3762/bjoc.18.87

• reagents and 1,3-dipolar azide–alkyne cycloaddition based on the alkyne moiety. Keywords: alkynyl imidazopyridinyl selenide; copper catalyst; imidazo[1,2-a]pyridine; selenium; tandem reaction; terminal alkyne; Introduction Imidazo[1,2-a]pyridines are important heterocycles that serve as key functional

• –Prakash reagent (TMSCF3) in the presence of Cs2CO3 as base in MeCN at 0 °C gave product 7 with a trifluoromethyl group. Stefani et al. reported the 1,3-dipolar azide–alkyne cycloaddition (AAC) of organotellanyl alkynes with organic azides in the presence of a copper reagent to form 5-organotellanyl-1,2,3

• -triazoles [33]. Based on these findings, we examined the reaction of Cu-mediated AAC. The reaction of 4aa with benzyl azide in the presence of one equivalent of CuI and pentamethyldiethylenetriamine (PMDETA) in THF at 60 °C gave the desired 5-selanyl-1,2,3-triazole 8 in 72% yield. This reaction yielded a

Inductive heating and flow chemistry – a perfect synergy of emerging enabling technologies

• Conrad Kuhwald,
• Sibel Türkhan and
• Andreas Kirschning

Beilstein J. Org. Chem. 2022, 18, 688–706, doi:10.3762/bjoc.18.70

• coupled with in situ generation of the azide from the corresponding bromide. The 1,2,3-triazoles are formed in up to 99% yield and in less than 10 minutes residence time, which includes azide formation prior to the cycloaddition step. Interestingly, this process could not be successfully repeated under

Heteroleptic metallosupramolecular aggregates/complexation for supramolecular catalysis

• Prodip Howlader and
• Michael Schmittel

Beilstein J. Org. Chem. 2022, 18, 597–630, doi:10.3762/bjoc.18.62

• able to build a new catalytic machinery [100]. Hereunto, the two concepts RPI and ILC were combined in a synergistic manner, starting with rotor [Cu2(83)(91)]2+ (k298 = 46.0 kHz) that catalyzed the click reaction between the zinc porphyrin ligand 92 and the azide 93 furnishing triazole 94 (Figure 20

• porphyrin 92 is catalytically inactive. However, upon addition of azide 93, the formation of [Cu2(83)(91)(94)2]2+ was detected. Since the organocatalyst originally firmly bound at the ZnPor of ligand 92 is now part of the dynamic slider-on-deck [Cu2(83)(91)(94)2]2+, the motion of biped 83 will dynamically

Site-selective reactions mediated by molecular containers

• Rui Wang and
• Yang Yu

Beilstein J. Org. Chem. 2022, 18, 309–324, doi:10.3762/bjoc.18.35

• could be regarded as a protective group by shielding the internal alkenyl site. In 2016, the Rebek group achieved the site-selective reduction of an α,ω-diazide compound by trimethylphosphine (PMe3) in aqueous solution with a cavitand host as the protecting group for one of the azide sites (Figure 5

• the complex solution with three equivalents of PMe3 resulted in the reduction of one of the azide groups. At this stage, the monoamine guest showed a fixed unsymmetrical J-shaped conformation with the amine end exposed and the azide end deeply protected inside the cavitand. The addition of another 3

• equivalents of PMe3 to the post-reaction mixture after 24 hours still did not induce further reduction of the residual azide group. However, control experiments gave just the diamine products. This work opened the protective ability of water-soluble cavitands and inspired many other following examples of

New efficient synthesis of polysubstituted 3,4-dihydroquinazolines and 4H-3,1-benzothiazines through a Passerini/Staudinger/aza-Wittig/addition/nucleophilic substitution sequence

• Long Zhao,
• Mao-Lin Yang,
• Min Liu and
• Ming-Wu Ding

Beilstein J. Org. Chem. 2022, 18, 286–292, doi:10.3762/bjoc.18.32

• isocyanides 3 produced the azide intermediates 4, which were treated sequentially with triphenylphosphine, isocyanates (or CS2), and secondary amines to give polysubstituted 3,4-dihydroquinazolines 8 and 4H-3,1-benzothiazines 11 in good overall yields through consecutive Passerini/Staudinger/aza-Wittig

• -azidobenzaldehyde (1a), benzoic acid (2a) and tert-butyl isocyanide (3a) as the reactants (Scheme 2). When a mixture of 1a, 2a, and 3a in CH2Cl2 was stirred at room temperature for 48 h, the three-component Passerini reaction was carried out smoothly and the azide 4a (R = Ph) was finally obtained in 87% yield

Anomeric 1,2,3-triazole-linked sialic acid derivatives show selective inhibition towards a bacterial neuraminidase over a trypanosome trans-sialidase

• Peterson de Andrade,
• Sanaz Ahmadipour and
• Robert A. Field

Beilstein J. Org. Chem. 2022, 18, 208–216, doi:10.3762/bjoc.18.24

• sialic acid derivatives in good yields and high purity via copper-catalysed azide–alkyne cycloaddition (CuAAC, click chemistry) and evaluated their activity towards TcTS and neuraminidase. Surprisingly, the compounds showed practically no TcTS inhibition, whereas ca. 70% inhibition was observed for

• ) has also been introduced at C-2 of α-triazole-linked sialic acid derivatives modified at C-9 as ligands for the transmembrane glycoprotein CD22 [21]. In this sense, we have synthesised a small series of 1,2,3-triazole-linked sialic acid derivatives via copper-catalysed azide–alkyne cycloaddition

• acid derivatives was synthesised as outlined in Figure 2B. Emulating our previous work with anomeric azide CuAAC click chemistry [17][22][23][24], the well-known α-azidosialic acid 1 [25] was synthesised from N-acetylneuraminic acid in four steps [26] in good overall yield (55%). The assignment of the

Chemical and chemoenzymatic routes to bridged homoarabinofuranosylpyrimidines: Bicyclic AZT analogues

• Sandeep Kumar,
• Jyotirmoy Maity,
• Banty Kumar,
• Sumit Kumar and
• Ashok K. Prasad

Beilstein J. Org. Chem. 2022, 18, 95–101, doi:10.3762/bjoc.18.10

• eventually brought about the need for newly designed and improved anti-HIV drugs with respect to their improved pharmacological properties [20]. With an idea to keep the presence of azide functionality and to introduce structural rigidity, Marquez et al. [21] developed a methodology for the synthesis of

Efficient and regioselective synthesis of dihydroxy-substituted 2-aminocyclooctane-1-carboxylic acid and its bicyclic derivatives

• İlknur Polat,
• Selçuk Eşsiz,
• Uğur Bozkaya and
• Emine Salamci

Beilstein J. Org. Chem. 2022, 18, 77–85, doi:10.3762/bjoc.18.7

• the epoxide-ring-opening reaction of 7 with sodium azide, to introduce an extra amino group in position 4 on the cyclooctane skeleton. For this, epoxide 7 was treated with NaN3 in the presence of NH4Cl/DMF and this formed lactone 13 as the sole product in 80% yield (Scheme 4). The epoxide 7 was

1,2-Naphthoquinone-4-sulfonic acid salts in organic synthesis

• Ruan Carlos B. Ribeiro,
• Patricia G. Ferreira,
• Amanda de A. Borges,
• Luana da S. M. Forezi,
• Fernando de Carvalho da Silva and
• Vitor F. Ferreira

Beilstein J. Org. Chem. 2022, 18, 53–69, doi:10.3762/bjoc.18.5

• with other nitrogenous nucleophiles, such as azide ions. The reaction of 18 in the presence of sodium azide and water produces 4-azido-1,2-naphthoquinone (39) in a 52% yield. Although 39 can produce many other derivatives, few reactions have been studied. The reaction of 39 with concentrated sulfuric

• involving the addition of arylamines to β-NQS 18 followed by N-alkynylation and then Cu(I)-catalyzed heterocyclization with tosyl azide in toluene at room temperature, leading to triazoles 50c–k in moderate to excellent yields (Scheme 14). The research group that most explored the formation of heterocycles

Iron-catalyzed domino coupling reactions of π-systems

• Austin Pounder and
• William Tam

Beilstein J. Org. Chem. 2021, 17, 2848–2893, doi:10.3762/bjoc.17.196

• examining of other potential arenes capable of undergoing electrophilic aromatic substitution would expand the applicability of the reaction. Carboazidation In 2018, Yang investigated the three-component carboazidation of styrene derivatives 115 with alkanes 101/139b and trimethylsilyl azide for the

• carboazidation product was observed. In the same year, the Xu laboratory demonstrated Togni’s reagent could be employed for the synthesis of γ-azido fluoroalkanes [128]. In 2019, Chu and co-workers demonstrated the three-component carboazidation of alkenes with chloroalkanes and trimethylsilyl azide could be

• solvent-tuned [129]. In neat CH2Cl2, the reaction produced the expected β-trichloromethyl alkyl azide; however, the reaction was chemoselective for diazidation when tert-butanol was used as co-solvent. The authors hypothesized the presence of the alcohol suppresses the polar-unmatched HAT process from

N-Sulfinylpyrrolidine-containing ureas and thioureas as bifunctional organocatalysts

• Viera Poláčková,
• Dominika Krištofíková,
• Boglárka Némethová,
• Renata Górová,
• Mária Mečiarová and
• Radovan Šebesta

Beilstein J. Org. Chem. 2021, 17, 2629–2641, doi:10.3762/bjoc.17.176

• mmol) in dry THF (10 mL) was cooled in an ice-water bath, and subsequently, diisopropyl azodicarboxylate (DIAD, 1.21 g, 6.0 mmol) and diphenylphosphoryl azide (DPPA, 1.65 g, 6.0 mmol) were added dropwise under argon atmosphere. The mixture was allowed to reach room temperature and stirred for 20 h. The