Tying a knot between crown ethers and porphyrins

• Maksym Matviyishyn and
• Bartosz Szyszko

Beilstein J. Org. Chem. 2023, 19, 1630–1650, doi:10.3762/bjoc.19.120

• of coordination compounds of copper(II), iron(II/III), manganese(II), nickel(II), and cobalt(II) with 9-Zn and 9-Cu was demonstrated. The emission quenching was rationalised considering the binding of the transition metal within the crown ether cavity. No quenching was observed upon the addition of

• porphyrins was investigated, resulting in the formation of lead(II), zinc(II), and copper(II) binuclear coordination compounds [54]. The synthetic methodology developed by Sessler allowed to generate a variety of expanded Schiff porphyrinoids [30][128] and texaphyrins [57][60][129]. The group has also

• the aryl group at the meso-position of the dipyrrin moiety. Compound 40 was tested for sensing metal ions, and while no significant changes were observed with most cations, the addition of Cu(II) resulted in a colour change. UV–vis spectroscopy and mass spectrometry confirmed the 1:1 copper(II

Lewis acid-promoted direct synthesis of isoxazole derivatives

• Dengxu Qiu,
• Chenhui Jiang,
• Pan Gao and
• Yu Yuan

Beilstein J. Org. Chem. 2023, 19, 1562–1567, doi:10.3762/bjoc.19.113

• reported [16]. In 2015, Yang’s group [10][17] reported the copper-catalyzed conversion of methylarenes into isoxazole derivatives with KNO3 as the source of nitrile oxide (Scheme 1, reaction 1). In 2019, Deng’s group [18] developed a three-component synthesis method of isoxazole derivatives using TBN as

• nitrogen source (Scheme 1, reaction 2). In 2017, Xu and co-workers [19] developed a copper-mediated annulation reaction to synthesize isoxazoles from two different alkynes. In fact, most methods mostly used highly toxic transition-metal catalysts such as copper metals. In order to develop cheaper and more

Morpholine-mediated defluorinative cycloaddition of gem-difluoroalkenes and organic azides

• Tzu-Yu Huang,
• Mario Djugovski,
• Sweta Adhikari,
• Destinee L. Manning and
• Sudeshna Roy

Beilstein J. Org. Chem. 2023, 19, 1545–1554, doi:10.3762/bjoc.19.111

• decomposition of azides at higher temperatures required the use of 2a or 2b in excess. No significant difference in yields between 1.5 equiv and 2 equiv of the aryl azide was observed. Adding fluorophilic additives (TMSCl, Table 1, entry 5) or using copper as other transition metal (CuCl or Cu(OAc)2, Table 1

• did not improve the yields when a cyano group was present on the azide handle. In fact, the use of CuSO4 with the cyano group lowered the yield (31%, see entry 12 in Table 1) which might be due to a coordination of the copper catalyst with the cyano group hindering the triazole formation [37]. The

Synthesis and biological evaluation of Argemone mexicana-inspired antimicrobials

• Jessica Villegas,
• Bryce C. Ball,
• Katelyn M. Shouse,
• Caleb W. VanArragon,
• Ashley N. Wasserman,
• Hannah E. Bhakta,
• Allen G. Oliver,
• Danielle A. Orozco-Nunnelly and
• Jeffrey M. Pruet

Beilstein J. Org. Chem. 2023, 19, 1511–1524, doi:10.3762/bjoc.19.108

• most streamlined method involves a copper-promoted Pictet–Spengler-type cyclization with glyoxal, with oxidative aromatization at the 8-position (Scheme 1) [30][35]. A recent report suggested a mechanistic role of Cu2+ involving C–H activation [36]; however, it is known that this reaction proceeds

• smoothly to the dihydroberberine in the absence of the copper salt [37]. This suggests the Cu2+ may be involved in aiding in the air-oxidation to the fully aromatic berberine core. The prime benefit of the route shown in Scheme 1 is the ease of introducing structural variability, as the precursor is easily

N-Sulfenylsuccinimide/phthalimide: an alternative sulfenylating reagent in organic transformations

• Fatemeh Doraghi,
• Seyedeh Pegah Aledavoud,
• Mehdi Ghanbarlou,
• Bagher Larijani and
• Mohammad Mahdavi

Beilstein J. Org. Chem. 2023, 19, 1471–1502, doi:10.3762/bjoc.19.106

• the presence of N-(2-bromophenylthio)succinimide 1’ and copper catalyst led to intermolecular sulfenoamination of alkenes and subsequent C–N coupling to produce dihydrobenzothiazine structures 27 in a one-pot manner. Furthermore, deprotection of the amine unit by K2CO3 and Na metal was performed in

• as a sulfenylating source gave the target product in 93% yield. Knochel and co-workers found that copper acetate can catalyze the cross-coupling reaction between (hetero)aryl, alkyl and benzylic zinc halides 36 with N-thiophthalimides 14 (Scheme 18) [55]. Various metal catalysts, including CrCl2

• , CoCl2, NiCl2, MnCl2, FeCl2, Fe(acac)3 and copper salts such as Cu(OAc)2, CuBr2, CuBr, CuCl2, and CuCN·2LiCl were evaluated in this coupling reaction, in which Cu(OAc)2 showed highest product yields. Moreover, phthalimides with SCF3, SCN, and SePh groups also worked well in this approach. Because of the

Application of N-heterocyclic carbene–Cu(I) complexes as catalysts in organic synthesis: a review

• Nosheen Beig,
• Varsha Goyal and
• Raj K. Bansal

Beilstein J. Org. Chem. 2023, 19, 1408–1442, doi:10.3762/bjoc.19.102

• and copper salts in the presence of NaOt-Bu in THF [15]. All attempts to prepare the corresponding iodide-containing compounds resulted in the formation of [(NHC)2Cu]+ species [15]. The copper complexes bearing ICy and It-Bu ligands were found to be sensitive to the excess of base and hence could not

• , K2CO3, or Cs2CO3) in the presence of copper chlorides (Scheme 11). However, this protocol required environmental unfriendly solvents such as 3-chloropyridine and high temperatures. In general, CuCl gave higher yields than CuCl2·2H2O typically ranging from 70 to 99% [24]. Furthermore, an IMes–CuCl

• diaminocarbene complex 32 and diamidocarbene (DAC) complex 33. The mononuclear N-heterocyclic carbene (NHC)–copper alkoxide complexes [(6-NHC)CuOt-Bu] (6-NHC = 6-MesDAC (30), 6-Mes (31)) were prepared by the addition of free carbenes to the tetrameric tert-butoxide precursor [Cu(Ot-Bu)]4, or by protonolysis of

One-pot nucleophilic substitution–double click reactions of biazides leading to functionalized bis(1,2,3-triazole) derivatives

• Hans-Ulrich Reissig and
• Fei Yu

Beilstein J. Org. Chem. 2023, 19, 1399–1407, doi:10.3762/bjoc.19.101

• azide was combined with a subsequent copper-catalyzed (3 + 2) cycloaddition with terminal alkynes. This one-pot process was developed with a simple model alkyne, but then applied to more complex alkynes bearing enantiopure 1,2-oxazinyl substituents. Hence, the precursor compounds 1,2-, 1,3- or 1,4-bis

• carbohydrate mimetics, but the reductive cleavage of the 1,2-oxazine rings to aminopyran moieties did not proceed cleanly with these compounds. Keywords: alkynes; azides; copper catalysis; nucleophilic substitution; 1,2-oxazines; Introduction The concept of click reactions [1][2], in particular, the

• discovery of the copper-catalyzed alkyne azide (3 + 2) cycloaddition (CuAAC) [3][4], has dramatically changed the approaches to many problems in chemistry, supramolecular chemistry, materials science, biological chemistry and related fields (selected reviews: [5][6][7][8][9][10][11][12][13][14][15

Consecutive four-component synthesis of trisubstituted 3-iodoindoles by an alkynylation–cyclization–iodination–alkylation sequence

• Nadia Ledermann,
• Alae-Eddine Moubsit and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2023, 19, 1379–1385, doi:10.3762/bjoc.19.99

• generated by a consecutive four-component reaction starting from ortho-haloanilines, terminal alkynes, N-iodosuccinimide, and alkyl halides in yields of 11–69%. Initiated by a copper-free alkynylation, followed by a base-catalyzed cyclizive indole formation, electrophilic iodination, and finally

• Discussion In our previous studies on the alkynylation–cyclization synthesis of 2-substituted (aza)indoles [32][33][34], we could show that the copper-free Pd-catalyzed alkynylation of 2-aminobromopyridines or 2-bromoanilines and the subsequent base-catalyzed anellation in a one-pot fashion proceeds without

• commences with a copper-free alkynylation using DBU as a base at 100 °C. This step is followed by the addition of KOt-Bu and reaction at 100 °C for 15 min and subsequent reaction with N-iodosuccinimide (3) at room temperature. Finally, the reaction with alkyl halides 4 at room temperature gives the title

Synthesis of ether lipids: natural compounds and analogues

• Marco Antônio G. B. Gomes,
• Alicia Bauduin,
• Chloé Le Roux,
• Romain Fouinneteau,
• Wilfried Berthe,
• Mathieu Berchel,
• Hélène Couthon and
• Paul-Alain Jaffrès

Beilstein J. Org. Chem. 2023, 19, 1299–1369, doi:10.3762/bjoc.19.96

• - or 3-bromoanisole were also reported) with bromotetradecane in the presence of a copper salt (Figure 10). Then, the deprotection of the phenol function with BBr3 produced 10.2. The deprotonation of the phenol function with NaH in DMF and its reaction with solketal mesylate produced, after the

Non-noble metal-catalyzed cross-dehydrogenation coupling (CDC) involving ether α-C(sp³)–H to construct C–C bonds

• Hui Yu and
• Feng Xu

Beilstein J. Org. Chem. 2023, 19, 1259–1288, doi:10.3762/bjoc.19.94

• . Route b: the α-C(sp3)–H bonds are activated by a combination of transition metals and radical initiators to give the alkyl radicals, which are coupled with other radical receptors to afford the target product. Cu-catalyzed reactions Copper (common oxidation states are +I, +II and +III) has a

• significantly different reactivity and chemical selectivity from noble metals (Ru, Rh, Pd). Compared with noble metals, copper catalysts are cheaper and easier to obtain, making Cu more advantageous for industrial applications of C–H functionalization reactions. The Glaser–Hay reaction may be one of the oldest

• reactions. Although the range of substrates for different C–H nucleophiles remains restricted, in recent years, copper-catalyzed oxidative coupling reactions between different C–H nucleophiles have been established. There are several common valence changes of copper in the catalytic process [44][45][46][47

Radical ligand transfer: a general strategy for radical functionalization

• David T. Nemoto Jr,
• Kang-Jie Bian,
• Shih-Chieh Kao and
• Julian G. West

Beilstein J. Org. Chem. 2023, 19, 1225–1233, doi:10.3762/bjoc.19.90

• form new C–Cl bonds in the presence of transient alkyl radicals, with mechanistic studies implicating homolytic abstraction of a chlorine ligand from the intermediate copper complex. Outside of the substitution products which could be generated from the RLT pathway, alkyl radicals could also undergo an

• elimination-like pathway to afford unsaturated C–C bonds in the presence of copper(II) sulfate, presumably via competitive RPC to the carbocation followed by E1 olefination. Kochi also demonstrated that RLT can be combined with other radical generation strategies to enable new, non-biomimetic reactions to be

• charge transfer (LMCT) which, following cage escape, could add to the alkene to generate an alkyl radical. This alkyl radical could then be chlorinated via RLT from a second Cu(II) chloride species, furnishing the dichlorinated product. While copper was unable to be used catalytically in this early

Unravelling a trichloroacetic acid-catalyzed cascade access to benzo[f]chromeno[2,3-h]quinoxalinoporphyrins

• Chandra Sekhar Tekuri,
• Pargat Singh and
• Mahendra Nath

Beilstein J. Org. Chem. 2023, 19, 1216–1224, doi:10.3762/bjoc.19.89

• Chandra Sekhar Tekuri Pargat Singh Mahendra Nath Department of Chemistry, Faculty of Science, University of Delhi, Delhi 110 007, India 10.3762/bjoc.19.89 Abstract A facile one-pot four-component synthetic methodology is evolved to construct novel copper(II) benzo[f]chromeno[2,3-h

• ]quinoxalinoporphyrins in good yields via a sequential reaction of copper(II) 2,3-diamino-5,10,15,20-tetraarylporphyrins, 2-hydroxynaphthalene-1,4-dione, aromatic aldehydes, and dimedone in the presence of a catalytic amount of trichloroacetic acid in chloroform at 65 °C. Further, the newly prepared copper(II

• present study discloses an easy and first synthetic approach to build highly π-conjugated copper(II) benzo[f]chromeno[2,3-h]quinoxalinoporphyrins through a trichloroacetic acid-catalyzed one-pot four-component reaction of 2,3-diamino-5,10,15,20-tetraarylporphyrins, 2-hydroxynaphthalene-1,4-dione, aromatic

Enabling artificial photosynthesis systems with molecular recycling: A review of photo- and electrochemical methods for regenerating organic sacrificial electron donors

• Grace A. Lowe

Beilstein J. Org. Chem. 2023, 19, 1198–1215, doi:10.3762/bjoc.19.88

• in acetonitrile with proton donors [45]. They carefully calculated the pKaH of their proton donors and NADH analogues to control the PCET and to prevent side reactions. In another interesting example, NADH was recycled at a copper electrode in aqueous buffers and NADH was found to be more stable in a

Exploring the role of halogen bonding in iodonium ylides: insights into unexpected reactivity and reaction control

• Carlee A. Montgomery and
• Graham K. Murphy

Beilstein J. Org. Chem. 2023, 19, 1171–1190, doi:10.3762/bjoc.19.86

• have been feasible. In 1989, Moriarty was investigating the intramolecular cyclopropanation of 10 under copper-catalysis, presuming that the reaction would proceed through a metallocarbene intermediate [113]. However, a control experiment showed the reaction to also be viable without catalyst, from

• their rhodium- and copper-catalyzed reactions (Scheme 2c) [116]. These results were in stark contrast to those observed for the ylide’s diazo counterparts, which did not react without a catalyst, and which gave the opposite diastereoselectivity with copper and rhodium. Inspired by ionic pathways

Photoredox catalysis harvesting multiple photon or electrochemical energies

• Mattia Lepori,
• Simon Schmid and
• Joshua P. Barham

Beilstein J. Org. Chem. 2023, 19, 1055–1145, doi:10.3762/bjoc.19.81

Copper-catalyzed N-arylation of amines with aryliodonium ylides in water

• Kasturi U. Nabar,
• Bhalchandra M. Bhanage and
• Sudam G. Dawande

Beilstein J. Org. Chem. 2023, 19, 1008–1014, doi:10.3762/bjoc.19.76

• .19.76 Abstract Copper sulfate catalyzed an efficient, inexpensive, and environment-friendly protocol that has been developed for N-arylation of amines with 1,3-cyclohexadione-derived aryliodonium ylides in water as a green solvent. Aromatic primary amines substituted with electron-donating as well as

• bond formation. However, these methods suffer from limitations such as moisture sensitivity, the requirement of specific ligands, and the use of expensive palladium catalysts [17]. Also, Chan Lam, Evans, and other research groups have developed copper-catalyzed C–N bond formation reactions by careful

• tuning of the ligand and base combinations [18][19]. Thereafter, copper-catalyzed C–N bond-formation reactions have experienced unprecedented development due to mild reaction conditions and the low cost of copper salts [20][21][22]. On the other hand, hypervalent iodine reagents serve as versatile tools

Clauson–Kaas pyrrole synthesis using diverse catalysts: a transition from conventional to greener approach

• Dileep Kumar Singh and
• Rajesh Kumar

Beilstein J. Org. Chem. 2023, 19, 928–955, doi:10.3762/bjoc.19.71

• at 60 °C (Scheme 15). Among the different solvents used to optimize the reaction conditions, H2O turned out to be a better and greener solvent compared to other organic solvents (e.g., MeCN, C6H6, CH2Cl2, THF, EtOH, EtOAc). Deng et al. [69] brilliantly described an expedient copper-catalyzed Clauson

• synthesis and proposed mechanism of N-substituted pyrroles 29. Magnetic nanoparticle-supported antimony catalyst used in the synthesis of N-substituted pyrroles 31. Iron(III) chloride-catalyzed synthesis of N-substituted pyrroles 33. Copper-catalyzed Clauson–Kaas synthesis and mechanism of pyrroles 35. β-CD

• -SO3H-catalyzed synthesis and proposed mechanism of pyrroles 37. Solvent-free and catalyst-free synthesis and plausible mechanism of N-substituted pyrroles 39. Nano-sulfated TiO2-catalyzed synthesis of N-substituted pyrroles 41. Copper nitrate-catalyzed Clauson–Kaas synthesis and mechanism of N

Synthesis of aliphatic nitriles from cyclobutanone oxime mediated by sulfuryl fluoride (SO₂F₂)

• Xian-Lin Chen and
• Hua-Li Qin

Beilstein J. Org. Chem. 2023, 19, 901–908, doi:10.3762/bjoc.19.68

• 1,4-dioxane the transformations performed the best (Table 1, entries 3–5). A series of copper catalysts such as CuI, CuCN, and Cu2O was screened, in which some showed good catalytic activity (Table 1, entries 6–9), and Cu2O was identified as the most effective catalyst for the desired transformation

• Scheme 5. Under the promotion of the base, cyclobutanone oxime preliminarily reacts with SO2F2, generating the activated precursor fluorosulfonate, which further reacts with the alkene 2a in the presence of the copper catalyst under Ar atmosphere for 9 h (Scheme 5a). The corresponding product was

Light-responsive rotaxane-based materials: inducing motion in the solid state

• Adrian Saura-Sanmartin

Beilstein J. Org. Chem. 2023, 19, 873–880, doi:10.3762/bjoc.19.64

• frameworks (MOFs) [16][54] has allowed the dynamics of the different counterparts in the solid state, as well as some advanced applications [55][56][57][58][59][60][61]. Berna and colleagues prepared a copper-organic framework (UMUMOF-(E)-3) containing the interlocked fumaramide (E)-3 as the organic ligand

• (Figure 3a) [62], forming rhombohedral grids connecting four different rotaxane derivatives to distinct copper-paddlewheel clusters (Figure 3b). Upon irradiation at 312 nm using a photoreactor equipped with UV lamps, 20% of the fumaramide stations were photoconverted into the corresponding intertwined

• the solid structure of UMUMOF-(E)-3 showing a rhombohedral metallogrid; and (c) cartoon representation of the operation mode of UMUMOF-(E)-3 as a molecular nanodispenser [62]. Colour key of the solid structure: light blue = carbon atoms; purple = nitrogen atoms; red = oxygen atoms; and grey = copper

Pyridine C(sp²)–H bond functionalization under transition-metal and rare earth metal catalysis

• Haritha Sindhe,
• Malladi Mounika Reddy,
• Karthikeyan Rajkumar,
• Akshay Kamble,
• Amardeep Singh,
• Anand Kumar and
• Satyasheel Sharma

Beilstein J. Org. Chem. 2023, 19, 820–863, doi:10.3762/bjoc.19.62

• and the base the initial direct C–H activation of the ylide 12 gives the copper pyridinium ylide 15. The latter reacts with the diazo compound formed through reaction of hydrazone 13 with the base to give the copper–carbene species 16. Then, the intermediate 16 undergoes a Cu–carbene migratory

• and 163 through a two-fold C–H activation under palladium catalysis. Silver carbonate and 2,6-lutidine were found to be an effective base and ligand, respectively, for providing the desired products 164 and 165 in good yields (Scheme 31). In 2015, an economic route for copper-catalyzed biaryl coupling

• plays a role as an activator and is subsequently eliminated via deoxygenative elimination furnishing the C-2-functionalized pyridines 167. The reaction mechanism (Scheme 32b) involves the initial C–H-cupration of 166 producing an oxazolyl–copper intermediate 168. Nucleophilic addition followed by C–H

Honeycomb reactor: a promising device for streamlining aerobic oxidation under continuous-flow conditions

• Masahiro Hosoya,
• Yusuke Saito and
• Yousuke Horiuchi

Beilstein J. Org. Chem. 2023, 19, 752–763, doi:10.3762/bjoc.19.55

• . From the viewpoint of application to pharmaceutical manufacturing, the residual amount of copper must be controlled according to ICH Q3D [41]. Iron and zinc have low toxicity and are not listed in ICH Q3D. In comparison with the initial reaction rate of 60 min, Fe(NO3)3/TEMPO in Table 1, entry 3 shows

Strategies in the synthesis of dibenzo[b,f]heteropines

• David I. H. Maier,
• Barend C. B. Bezuidenhoudt and
• Charlene Marais

Beilstein J. Org. Chem. 2023, 19, 700–718, doi:10.3762/bjoc.19.51

• disorders) [16] (Figure 2). 10,11-Dihydrodibenzo[b,f]azepine-based ligand 7 and a methyl analogue thereof are known to form pincer complexes with Pd, Ir, Rh and Ln [5], whereas a copper(II) wagon wheel complex of 8 was reported in a molecular organic framework (MOF) (Figure 3) [6]. 4,4'-(5-(Pyridin-2-yl

• copper-catalysed oxidative conditions to effect the transformation to 30 and 31. 2.3 Ring expansion from N-arylisatins Elliott et al. [47] reported the four-step synthesis of fluorinated 5H-dibenzo[b,f]azepine 38 from N-arylisatin 34 via Wagner–Meerwein rearrangement of 9-acridinemethanol 37 [43] (Scheme

• synthesised via a copper-catalysed Ullman-type coupling or a palladium-catalysed Buchwald–Hartwig amination (Scheme 9). Performing the rearrangement at high temperatures resulted in the undesirable formation of acridine byproducts 44. Cleaner reaction profiles could be obtained at a lower temperature (100 °C

Synthesis, structure, and properties of switchable cross-conjugated 1,4-diaryl-1,3-butadiynes based on 1,8-bis(dimethylamino)naphthalene

• Semyon V. Tsybulin,
• Ekaterina A. Filatova,
• Alexander F. Pozharskii,
• Valery A. Ozeryanskii and
• Anna V. Gulevskaya

Beilstein J. Org. Chem. 2023, 19, 674–686, doi:10.3762/bjoc.19.49

• oligomers 5 can be synthesized by a Glaser oxidative dimerization of monomers 6 (Scheme 1). The obvious route for the synthesis of the latter is the sequential alkynylation of 2,7-diiodonaphthalene 8. In accordance with this strategy, diiodide 8 was cross-coupled with copper(I) arylacetylides (Castro

pH-Responsive fluorescent supramolecular nanoparticles based on tetraphenylethylene-labelled chitosan and a six-fold carboxylated tribenzotriquinacene

• Nan Yang,
• Yi-Yan Zhu,
• Wei-Xiu Lin,
• Yi-Long Lu and
• Wen-Rong Xu

Beilstein J. Org. Chem. 2023, 19, 635–645, doi:10.3762/bjoc.19.45

• measured on a high-sensitivity fluorescence spectrometer HORIBA Fluorolog-3. TEM experiments. The morphology and size of TBTQ-C6/CS-TPE nanoparticles were studied by use of a Talos F200X G2 field emission transmission electron microscope (TEM). The sample solution was dropped on a copper net and then dried

Enolates ambushed – asymmetric tandem conjugate addition and subsequent enolate trapping with conventional and less traditional electrophiles

• Péter Kisszékelyi and
• Radovan Šebesta

Beilstein J. Org. Chem. 2023, 19, 593–634, doi:10.3762/bjoc.19.44

• all possess helpful and, to an extent, specific reactivity characteristics. Interesting boron and silicon enolates can be generated by asymmetric conjugate boration [16], or silylation [17]. From several potentially catalytically active transition metals, copper combines beneficial properties for both

• benzaldehyde (51) (Scheme 13a). Related to this work, Feringa´s team realized also the conjugate addition to chromone (53) [44]. The enolate was again trapped with benzaldehyde in an aldol reaction (Scheme 13b). Naphthol derivatives 55 bearing an α,β-unsaturated ester group undergo a copper(I)-catalyzed

• asymmetric conjugate addition. The magnesium enolates 56 then participated in a copper(II)-mediated intramolecular oxidative coupling to afford benzofused spirocyclic cycloalkanones 57 (Scheme 14) [45]. Our team became interested in domino reactions of metal enolates generated by Cu-catalyzed asymmetric