Transition-metal-catalyzed domino reactions of strained bicyclic alkenes

• Austin Pounder,
• Eric Neufeld,
• Peter Myler and
• William Tam

Beilstein J. Org. Chem. 2023, 19, 487–540, doi:10.3762/bjoc.19.38

• coupling partners to either propagate the reaction or to terminate the process. This review presents a comprehensive examination of domino reactions involving strained bicyclic alkenes. Rather than being exhaustive in the range of potential difunctionalization processes covered, the review will be limited

• equivalents of water interrupted the cyclization step and led entirely to reductively coupled alkenylated ring-opened products. Interestingly, when this methodology was applied to the ester-bearing oxabicyclic 1a, the anticipated reductive coupling product was not detected; instead, bicyclic γ-lactone 4 was

• solely observed (Scheme 1). This unprecedented lactone is presumed to be generated through the expected reductive coupling to generate the ring-opened intermediate 5 which undergoes subsequent intramolecular lactonization with the distal ester group. In the same year, Cheng and co-workers observed the

Asymmetric synthesis of a stereopentade fragment toward latrunculins

• Benjamin Joyeux,
• Antoine Gamet,
• Nicolas Casaretto and
• Bastien Nay

Beilstein J. Org. Chem. 2023, 19, 428–433, doi:10.3762/bjoc.19.32

• , in view of its coupling to 8. We first relied the chemoselective epoxidation of the homoallylic alcohol, done in presence of VO(OiPr)3 (20 mol %) and t-BuOOH to afford epoxide 13, in 86% yield and a dr of 75:25 (measured by NMR, presumably resulting from the major diastereoisomer of 13; minor isomers

Combretastatins D series and analogues: from isolation, synthetic challenges and biological activities

• Jorge de Lima Neto and
• Paulo Henrique Menezes

Beilstein J. Org. Chem. 2023, 19, 399–427, doi:10.3762/bjoc.19.31

• . An o-phenolic coupling between two units of tyrosine furnishes the intermediate Int-1, which by deamination, selective reduction of one of the carboxylate groups, macrolactonization, and subsequent structural modifications would lead to the aforementioned combretastatins D (Scheme 1). The second

• would give compounds 12 and 13. A coupling reaction would give the corresponding diaryl ether Int-2, in a similar way to that suggested by Pettit, which could be selectively reduced to afford the corresponding seco-acid (intermediates Int-3 and Int-4). Subsequent macrolactonization would give the

• for synthesis. In general, the synthesis of these macrocyclic compounds can be accomplished by using two distinct disconnections (Scheme 3): one concerns the formation of the macrocycle through macrolactonization reaction from the former seco-acid formed from the Ar–O–Ar coupling from the aryl donor

Discrimination of β-cyclodextrin/hazelnut (Corylus avellana L.) oil/flavonoid glycoside and flavonolignan ternary complexes by Fourier-transform infrared spectroscopy coupled with principal component analysis

• Nicoleta G. Hădărugă,
• Gabriela Popescu,
• Dina Gligor (Pane),
• Cristina L. Mitroi,
• Sorin M. Stanciu and
• Daniel Ioan Hădărugă

Beilstein J. Org. Chem. 2023, 19, 380–398, doi:10.3762/bjoc.19.30

• suitable for the evaluation of such ternary complexes. The coupling of FTIR or other spectroscopic or chromatographic techniques with a multivariate statistical analysis method (e.g., principal component analysis, PCA) allows the evaluation of the similarity/dissimilarity of complexes, as well as the

CuAAC-inspired synthesis of 1,2,3-triazole-bridged porphyrin conjugates: an overview

• Dileep Kumar Singh

Beilstein J. Org. Chem. 2023, 19, 349–379, doi:10.3762/bjoc.19.29

• includes a brief synthetic procedure with reaction conditions, product yields, and photophysical and other properties of the end products. Review Overview of CuAAC click reactions on porphyrins The CuAAC-inspired click reaction is particularly useful for the coupling of two different moieties comprising

Strategies to access the [5-8] bicyclic core encountered in the sesquiterpene, diterpene and sesterterpene series

• Cécile Alleman,
• Charlène Gadais,
• Laurent Legentil and
• François-Hugues Porée

Beilstein J. Org. Chem. 2023, 19, 245–281, doi:10.3762/bjoc.19.23

• 31 and oxazolidinone 32 (Scheme 5) [26]. Subsequently, compound 33 was converted in four steps into aldehyde 34 which was engaged in a coupling reaction with bromoketone 35 according to Utimoto conditions to furnish the A-C-D adduct 36 as a single stereoisomer in high yield. Of note, the Utimoto

• possessing a terminal alkene and a vinyl iodide moiety in 9 steps. This compound can be considered as a difunctionalized compound. Indeed, the vinyl iodide function will be engaged first in a coupling reaction with hydrindanone 87 and the terminal alkene will be involved in the key RCM reaction to ensure

• formation of the central eight-membered ring. To achieve this goal, a model study was first conducted to define the best reaction conditions. Thus, coupling of the lithio-derivative of 89 to hydrindanone 87 proceeded smoothly to furnish the expected tertiary alcohol 90 with a high stereo- and

Sequential hydrozirconation/Pd-catalyzed cross coupling of acyl chlorides towards conjugated (2E,4E)-dienones

• Benedikt Kolb,
• Daniela Silva dos Santos,
• Sanja Krause,
• Anna Zens and
• Sabine Laschat

Beilstein J. Org. Chem. 2023, 19, 176–185, doi:10.3762/bjoc.19.17

• analogues, whereas the variation of the acyl chlorides did not affect the reaction significantly. The synthetic application is demonstrated by formation of non-natural and natural dienone-containing terpenes such as β-ionone which was available in 4 steps and 6% overall yield. Keywords: cross coupling

• ethers 12 [19] and metal-catalyzed cross coupling of alkenes 13 and enones 14 [20][21] have been reported. However, these reactions face multiple disadvantages such as limited substrate scope, use of hazardous solvents and harsh reaction conditions such as high temperatures or acidic/basic conditions

• ][33][34][35][36][37][38][39][40] as well as in several total syntheses of natural products [41][42][43][44][45][46]. Especially the combination of hydrozirconation and Pd or Ni-catalyzed cross coupling was elaborated by several groups (Scheme 3) [47][48][49][50][51][52][53][54]. Negishi extended

Total synthesis of insect sex pheromones: recent improvements based on iron-mediated cross-coupling chemistry

• Eric Gayon,
• Guillaume Lefèvre,
• Olivier Guerret,
• Adrien Tintar and
• Pablo Chourreu

Beilstein J. Org. Chem. 2023, 19, 158–166, doi:10.3762/bjoc.19.15

• sustainable synthetic procedures involving cheap, non-toxic and efficient additives is also discussed, as well as the mechanistic features guiding the reactivity of such catalytic systems. Keywords: catalysis; cross-coupling; insect pheromones; iron; Introduction Public health issues related to

• ]) are linear syntheses involving a great number of steps and purifications as well as cryogenic temperatures. Moreover, the introduction of the C=C unsaturation is achieved via a Wittig reaction or a Pd-catalyzed Sonogashira cross-coupling followed by a reduction by a borane reagent, methods which lead

• to overall processes with a low atom economy, generating a significant amount of chemical waste, and which can be expensive when noble metals such as palladium salts are required (Scheme 1). The high efficiency of transition-metal-catalyzed cross-coupling methods in C–C bond formation processes

1,4-Dithianes: attractive C2-building blocks for the synthesis of complex molecular architectures

• Bram Ryckaert,
• Ellen Demeyere,
• Frederick Degroote,
• Hilde Janssens and
• Johan M. Winne

Beilstein J. Org. Chem. 2023, 19, 115–132, doi:10.3762/bjoc.19.12

• °C and 0 °C, temperatures at which these organometallic reagents are also reported to be quite stable. The zincated dithiins can also be prepared by transmetalation of the magnesiated dithiins at −30 °C, and these organozinc reagents can then be used in room temperature Pd-catalyzed cross-coupling

• , including cross-coupling-type chemistries on a conformationally stable cis-vinyl zinc building block. 3 Diels–Alder reactivity of 1,4-dithiin-based dienophiles and dienes Vinyl sulfones and vinyl sulfoxides are classical synthetic equivalents of ethylene in Diels–Alder reactions, and have been widely used

• metalation of 1,4-dithiins affords stable heteroaryl-magnesium and heteroaryl-zinc-like reagents that can be used in coupling reactions at higher temperatures [43][44]. Dithiin-based dienophiles and their use in synthesis [33][49][50][51][52][53][54]. Dithiin-based dienes and their use in synthesis [55][56

Synthesis and characterisation of new antimalarial fluorinated triazolopyrazine compounds

• Kah Yean Lum,
• Jonathan M. White,
• Daniel J. G. Johnson,
• Vicky M. Avery and
• Rohan A. Davis

Beilstein J. Org. Chem. 2023, 19, 107–114, doi:10.3762/bjoc.19.11

• 4.60 (H-17)] and 10 aromatic protons [δH 7.49 (H-6), 7.68 (H-11, H-15), 7.64 (H-12, H-14), 6.90 (H-20, H-24), 7.26 (H-21, H-22, H-23)]. A triplet resonating at δH 7.06 represents the proton located in the difluoromethyl group (H-25), with a 1JHF coupling constant of 53.4 Hz. The 13C NMR spectrum

Practical synthesis of isocoumarins via Rh(III)-catalyzed C–H activation/annulation cascade

• Qian-Ci Gao,
• Yi-Fei Li,
• Jun Xuan and
• Xiao-Qiang Hu

Beilstein J. Org. Chem. 2023, 19, 100–106, doi:10.3762/bjoc.19.10

• activation/annulation cascade of readily available enaminones with iodonium ylides towards the convenient synthesis of isocoumarins. This coupling system proceeds in useful chemical yields (up to 93%) via a cascade C–H activation, Rh-carbenoid migratory insertion and acid-promoted intramolecular annulation

• for the synthesis of isocoumarin scaffolds. Traditional synthetic strategies including 1) intramolecular cyclization of 2-alkenyl benzoic acids or o‑alkynylbenzoates (Scheme 1b, I) [6][7][8][9][10], 2) oxidation of isochromans (Scheme 1b, II) [11][12], or 3) metal-catalyzed cross-coupling/cyclization

• approach towards isocoumarins [17][18]. Pioneering examples relying on the Pd, Ru, and Ir-catalyzed C–H cross coupling of benzoic acids with alkenes and alkynes were realized by the groups of Miura [19], Lee [20], Ackermann [21], Zhang [22], Jiang [23], and Jeganmohan [24] et al. Despite these impressive

Organophosphorus chemistry: from model to application

• György Keglevich

Beilstein J. Org. Chem. 2023, 19, 89–90, doi:10.3762/bjoc.19.8

• ” topics of the discipline under discussion. Cross-coupling reactions are also of importance in organophosphorus chemistry. Taddei and co-workers applied an alternative method to the classical Hirao reaction [1]. They utilized the Ni-catalyzed double Michaelis–Arbuzov reaction of bis(bromoaryl) species and

Improving the accuracy of ³¹P NMR chemical shift calculations by use of scaling methods

• William H. Hersh and
• Tsz-Yeung Chan

Beilstein J. Org. Chem. 2023, 19, 36–56, doi:10.3762/bjoc.19.4

• ; stereoisomers; Introduction Calculation of 1H and 13C NMR chemical shifts and coupling constants using density functional theory (DFT) has increasingly become an adjunct to structure determination [1][2][3][4][5][6][7][8]. In particular for complex organic compounds, determination of relative stereochemistry

• accurate enough to distinguish stereoisomers via chemical shifts rather than coupling constants [72][73] and provide confirmation of unusual structures and chemical shifts, and with the further stipulation that multiple P–C bonding would likely give inaccurate M06-2X NMR calculations (Table 3; results with

Combining the best of both worlds: radical-based divergent total synthesis

• Kyriaki Gennaiou,
• Antonios Kelesidis,
• Maria Kourgiantaki and
• Alexandros L. Zografos

Beilstein J. Org. Chem. 2023, 19, 1–26, doi:10.3762/bjoc.19.1

• chemoselective manner [3]. The development of persistent radicals [4] as synthons in chemical synthesis, coupled with the advancements in generating and manipulating transient radicals [5] as cross-coupling partners in an array of chemical reactions, gives access to a wide variety of “new” retrosynthetic

• reactions of transition metal hydrides (Fe, Co, Mn, etc) with alkenes (e.g., Mukaiyama hydration) [20]. The last decade saw the development of milder methods for generating carbon-centered radicals as the advancement of their reactivity in cross-coupling reactions, the concept of photoredox catalysis [21

• nickel-mediated decarboxylative Giese reactions and decarboxylative radical zinc-mediated cross-coupling reactions of redox-active esters, established from previous works of the group [27][28], for the key C–C bonds of the diverse congeners. To this end, a hypothetical intermediate 3 was envisioned for

Digyalipopeptide A, an antiparasitic cyclic peptide from the Ghanaian Bacillus sp. strain DE2B

• Adwoa P. Nartey,
• Aboagye K. Dofuor,
• Kofi B. A. Owusu,
• Anil S. Camas,
• Hai Deng,
• Marcel Jaspars and
• Kwaku Kyeremeh

Beilstein J. Org. Chem. 2022, 18, 1763–1771, doi:10.3762/bjoc.18.185

• in the 1H NMR spectrum amidst huge overlaps of signals for δH 2.41, 2.38 (ov., 2H, H-38), δH 5.00 (m, 1H, H-39), δH 1.55 (ov., 2H, H-40) made it difficult to also obtain coupling constants (3JHH) for information on the relative spatial orientation of residues in this part of the structure. In order

Synthetic study toward tridachiapyrone B

• Morgan Cormier,
• Florian Hernvann and
• Michaël De Paolis

Beilstein J. Org. Chem. 2022, 18, 1741–1748, doi:10.3762/bjoc.18.183

• ambitious coupling, however, met a dead-end and a less direct approach was explored. With a more reactive and less hindered nucleophile, we explored the coupling of lithiocyclopentadiene to compound 2. After conjugate addition and elimination of lithium methoxide, the resulting 6a would be deprotonated by

• . As an aromatic carbanion, it was unclear whether the addition of lithiocyclopentadiene to 2 would succeed [30]. Pleasingly though, the coupling was successful and moreover simply implemented by reacting lithiocyclopentadiene (2 equiv) with pyrone 2 at room temperature, no reaction occurring at lower

• to 2,5-cyclohexanedione 5 was accordingly updated and an approach to make use of the Robinson-type annulation was devised from aldehyde 9, prepared by oxidation of α-crotyl-α’-methoxy-γ-pyrone 8 (Scheme 4). While its synthesis was initially investigated by the coupling of tri(n-butyl)crotylstannane

Inline purification in continuous flow synthesis – opportunities and challenges

• Jorge García-Lacuna and
• Marcus Baumann

Beilstein J. Org. Chem. 2022, 18, 1720–1740, doi:10.3762/bjoc.18.182

• dipeptide with the aim to overcome issues found in batch in relation to product stability and scale-up concerns. The peptide coupling reaction was performed continuously aided by a MSMPR crystallizer system. This system ultimately shortened the holding time for the quenched solution, leading to a robust

• produced as byproduct in the metathesis reaction. Some subsequent publications include the Pd-complex removal after a Suzuki coupling [126], a Heck catalyst retention with reverse boiling-point-order solvent exchange [127], and a membrane for recovery of the photocatalyst TBADT (tetrabutylammonium

Total synthesis of grayanane natural products

• Nicolas Fay,
• Rémi Blieck,
• Cyrille Kouklovsky and
• Aurélien de la Torre

Beilstein J. Org. Chem. 2022, 18, 1707–1719, doi:10.3762/bjoc.18.181

• -membered ring closure through a SmI2-promoted pinacol coupling. This reaction had been previously described by the same group and proved to be highly effective [23]. For rings A, C and D, other SmI2-promoted steps were employed, giving respectively the cyclopentane A ring moiety and the bicyclo[3.2.1

• selectivity was achieved by chelation of the Sm(III) intermediate with hydroxy groups present on the structure. As the direct coupling with the A-ring precursor failed, a strategy to build this part was developed, starting with a sequence involving a protection of the alcohols as MOM ethers, lactone

• suitable starting material for the SmI2-promoted pinacol coupling, directed by the free hydroxy group, affording a complete selectivity in the formation of the 7-membered ring B. The synthesis of grayanotoxin III was then achieved by acetylation of the secondary alcohols, oxidative cleavage of the MOM

Redox-active molecules as organocatalysts for selective oxidative transformations – an unperceived organocatalysis field

• Elena R. Lopat’eva,
• Igor B. Krylov,
• Dmitry A. Lapshin and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2022, 18, 1672–1695, doi:10.3762/bjoc.18.179

• oxidative coupling processes (also known as cross-dehydrogenative coupling), as well as late-stage CH-functionalization. Oxidation processes are recognized as a challenge in fine organic synthesis technology [10][11] due to selectivity problems and frequent need for toxic transition metal salts and

• coupling, or deprotonation followed by the functionalization of α- and β-positions of the starting aldehyde. NHC-catalyzed photochemical processes [64] and oxidative cyclizations with heterocycle formation [65] were reviewed previously. Acidic molecules or hydrogen-bond donors are used as organocatalysts

• coupling of alkylarenes with NHPI was realized recently [94] (Scheme 11). In this process the formation of benzylic radicals is catalyzed by PINO radicals. According to the mechanism supported by quantum chemical calculations, the mixture of C–O and C–N products is formed as a result of the attack of the

Synthesis of (−)-halichonic acid and (−)-halichonic acid B

• Keith P. Reber and
• Emma L. Niner

Beilstein J. Org. Chem. 2022, 18, 1629–1635, doi:10.3762/bjoc.18.174

• coupling constant between the two methine hydrogens at the ring fusion (3J = 12.9 Hz). The rigid nature of the trans-fused 6/5 ring system results in distinct conformers for 9 and 10; fortunately, this allowed for the unambiguous assignment of the relative configurations of these diastereomers via NMR

Synthetic study toward the diterpenoid aberrarone

• Liang Shi,
• Zhiyu Gao,
• Yiqing Li,
• Yuanhao Dai,
• Yu Liu,
• Lili Shi and
• Hong-Dong Hao

Beilstein J. Org. Chem. 2022, 18, 1625–1628, doi:10.3762/bjoc.18.173

• was further confirmed through X-ray crystallographic analysis. With the key intermediate 10 in hand, we were in a position to test the planned two-step transformation including the palladium-catalyzed reductive cross coupling with HCO2H followed by Pd/C-catalyzed hydrogenation. To our surprise, the

• –Martin oxidation. At this stage, the pivotal C–H insertion step was tried under the reported conditions [34], and cyclopentenone 8 was successfully obtained. Further study with cross coupling or halogen–magnesium exchange shows this moiety is inert for functional group transformation. The attempt for

A new route for the synthesis of 1-deazaguanine and 1-deazahypoxanthine

• Raphael Bereiter,
• Marco Oberlechner and
• Ronald Micura

Beilstein J. Org. Chem. 2022, 18, 1617–1624, doi:10.3762/bjoc.18.172

• intermediates. Here, we present a new tactic for the syntheses of 1-deazaguanine and 1-deazahypoxanthine stimulated by a recently published route of our research group for the corresponding nucleosides [16][17], employing the same key reaction, namely the copper-catalyzed coupling of an aryl iodide with benzyl

• two options for the generation of 4-ethoxy-2,3,6-triaminopyridine (9). One possibility comprised the deprotection of the dicarbamate 5 with potassium hydroxide giving the diamine 6, followed by azo coupling with the diazonium salt obtained from aniline and sodium nitrite to give azo compound 7

• differed from the above path by leaving the hydroxy group of all intermediate 4-hydroxypyridine derivatives 12–15 unprotected [19]. Moreover, instead of azo coupling or nitroso formation, a simple nitration protocol with nitric acid to give the nitro derivative 13 and subsequent reduction with Raney nickel

Preparation of β-cyclodextrin-based dimers with selectively methylated rims and their use for solubilization of tetracene

• Konstantin Lebedinskiy,
• Volodymyr Lobaz and
• Jindřich Jindřich

Beilstein J. Org. Chem. 2022, 18, 1596–1606, doi:10.3762/bjoc.18.170

• silyl groups. Both other reagents used for the cleavage in CD chemistry (TBAF and BF3.Et2O) yielded byproducts that unnecessarily complicated the purification. The CuAAC "click reaction" in CD chemistry is also a well-known approach, allowing coupling reactions of azido-containing CDs with different

• most crucial restriction in coupling two CD units by propargyl ether is the volatility of the latter compound. Thus, we discovered that performing the reaction at room temperature, prolonging the reaction time, and using an equivalent amount of the copper catalyst resulted in the best yields. Another

• kind of reaction engaging the azido group in the CD chemistry is the phosphine imide reaction [30][31]. This transformation involves triphenylphosphine and carbon dioxide to convert azide into isocyanate [31], allowing coupling with amines or other nucleophile groups. It is interesting to note that the

Formal total synthesis of macarpine via a Au(I)-catalyzed 6-endo-dig cycloisomerization strategy

• Jiayue Fu,
• Bingbing Li,
• Zefang Zhou,
• Maosheng Cheng,
• Lu Yang and
• Yongxiang Liu

Beilstein J. Org. Chem. 2022, 18, 1589–1595, doi:10.3762/bjoc.18.169

• . The convergent synthetic strategies feature the utilization of Au(I)-catalyzed cycloisomerizations of a 1,5-enyne and alkynyl ketone substrates, which were prepared by Sonogashira coupling reactions. Keywords: benzo[c]phenanthridine alkaloids; 1,5-enyne; formal total synthesis; gold catalysis

• be synthesized from silyl enol ether compound 10 via the Au(I)-catalyzed cycloisomerization reaction developed by our group [15]. The compound 10 could be constructed by the Sonogashira coupling reaction from readily prepared iodoarene 8 [12][16] and ketone 5, which could be synthesized by using

• cheap 6-bromopiperonal (2) as the starting material. To attempt the proposed synthetic strategy, ketone 5 and iodoarene 8 were prepared by following the synthetic route outlined in Scheme 4. Ketone 5 was prepared in a four-step procedure. Firstly, a Sonogashira coupling between 6-bromopiperonal (2) and

Functionalization of imidazole N-oxide: a recent discovery in organic transformations

• Koustav Singha,
• Imran Habib and
• Mossaraf Hossain

Beilstein J. Org. Chem. 2022, 18, 1575–1588, doi:10.3762/bjoc.18.168

• , like cycloaddition, metal-free coupling reactions, three-component or multicomponent reactions etc., which use N-oxide chemistry. In 2021 Timofey D. Moseev and co-workers unfolded an attractive procedure of the coupling reaction between 2H-imidazole 1-oxides and polyphenols under metal-free conditions

• through C–H/C–H coupling [10]. Also, in 2020, Valery P. Perevalov and team reported a three-component reaction of 2-unsubstituted imidazole N-oxides, arylglyoxals, and CH-acids [11]. However, the use of imidazole 1-oxides is not much unfolded till now among the science community. There were quite some

• the past years are discussed. This review contains cycloaddition reactions, nucleophilic halogenation reactions, metal-free coupling reactions, formation of N-heterocyclic carbenes, and multicomponent reactions, mainly three-component reactions. The mentioned methodologies have been performed by