Unusual highly diastereoselective Rh(II)-catalyzed dimerization of 3-diazo-2-arylidenesuccinimides provides access to a new dibenzazulene scaffold

• Anastasia Vepreva,
• Alexander S. Bunev,
• Andrey Yu. Kudinov,
• Grigory Kantin,
• Mikhail Krasavin and
• Dmitry Dar’in

Beilstein J. Org. Chem. 2022, 18, 533–538, doi:10.3762/bjoc.18.55

• compounds (aldehydes and ketones) enable to obtain the products of formal [5 + 2] cycloaddition reactions ‒ 2-benzazepines [8] and 2-benzoxepines [9][10]. When studying the Rh(II)-catalyzed reaction of DAS with ketones [10], we attempted to involve poorly reactive fluorenone in the reaction. To our surprise

Synthesis of 3,4,5-trisubstituted isoxazoles in water via a [3 + 2]-cycloaddition of nitrile oxides and 1,3-diketones, β-ketoesters, or β-ketoamides

• Md Imran Hossain,
• Md Imdadul H. Khan,
• Seong Jong Kim and
• Hoang V. Le

Beilstein J. Org. Chem. 2022, 18, 446–458, doi:10.3762/bjoc.18.47

• polarity on the keto–enol equilibrium of the 1,3-diketones, which influences the results of the [3 + 2] cycloaddition reactions under mild basic conditions, via nuclear magnetic resonance (NMR) spectroscopy. The 1H NMR spectra of 1-phenyl-1,3-butanedione (2a) in CDCl3 and in methanol-d4 indicated that the

Site-selective reactions mediated by molecular containers

• Rui Wang and
• Yang Yu

Beilstein J. Org. Chem. 2022, 18, 309–324, doi:10.3762/bjoc.18.35

• . Review Cycloaddition/addition Cycloaddition reactions have long been applied to molecular container-mediated enzyme-mimicking transformations [27][31][32][33], and the Fujita group has done pioneering research works in this direction [27][34]. In 2006, the authors reported unique Diels–Alder reactions of

Me₃Al-mediated domino nucleophilic addition/intramolecular cyclisation of 2-(2-oxo-2-phenylethyl)benzonitriles with amines; a convenient approach for the synthesis of substituted 1-aminoisoquinolines

• Krishna M. S. Adusumalli,
• Lakshmi N. S. Konidena,
• Hima B. Gandham,
• Krishnaiah Kumari,
• Krishna R. Valluru,
• Satya K. R. Nidasanametla,
• Venkateswara R. Battula and
• Hari K. Namballa

Beilstein J. Org. Chem. 2021, 17, 2765–2772, doi:10.3762/bjoc.17.186

• cycloaddition reactions and also serves as a precursor for the generation of important functional groups like amines, aldehydes, ketones and carboxylic acids. Even though the nitrile functional group is prevalent in the transformation into different functional groups, the synthetic approaches that incorporate

Synthesis of phenanthridines via a novel photochemically-mediated cyclization and application to the synthesis of triphaeridine

• Songeziwe Ntsimango,
• Kennedy J. Ngwira,
• Moira L. Bode and
• Charles B. de Koning

Beilstein J. Org. Chem. 2021, 17, 2340–2347, doi:10.3762/bjoc.17.152

• ], rhodium-mediated alkyne [2 + 2 + 2] cycloaddition reactions [3], and the palladium-catalysed aerobic domino Suzuki coupling/Michael addition reaction [4]. The most attractive and common strategies to phenanthridines rely on intramolecular cyclizations of various ortho-functionalized biaryl precursors

(Phenylamino)pyrimidine-1,2,3-triazole derivatives as analogs of imatinib: searching for novel compounds against chronic myeloid leukemia

• Luiz Claudio Ferreira Pimentel,
• Lucas Villas Boas Hoelz,
• Henayle Fernandes Canzian,
• Frederico Silva Castelo Branco,
• Andressa Paula de Oliveira,
• Vinicius Rangel Campos,
• Floriano Paes Silva Júnior,
• Rafael Ferreira Dantas,
• Jackson Antônio Lamounier Camargos Resende,
• Anna Claudia Cunha,
• Nubia Boechat and
• Mônica Macedo Bastos

Beilstein J. Org. Chem. 2021, 17, 2260–2269, doi:10.3762/bjoc.17.144

• cycloaddition reactions via the copper-catalyzed 1,3-dipolar cycloaddition reaction (CuAAC) of the azides 5 and 9 with suitably functionalized acetylenes 6a–j, using sodium ascorbate and copper sulfate in ACN/H2O 2:1 under microwave irradiation were carried out to obtain the 1,4-regioisomers of the final

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• substituents on the benzaldeydes 169 [72]. Cycloaddition reactions In 2014, Gao, Li, and their co-workers published a facile strategy to synthesize polysubstituted aromatic compounds from the reaction of quinones or maleimides with β-enamino esters (Scheme 39) [73]. They synthesized anthraquinone derivatives

On the application of 3d metals for C–H activation toward bioactive compounds: The key step for the synthesis of silver bullets

• Renato L. Carvalho,
• Amanda S. de Miranda,
• Mateus P. Nunes,
• Roberto S. Gomes,
• Guilherme A. M. Jardim and
• Eufrânio N. da Silva Júnior

Beilstein J. Org. Chem. 2021, 17, 1849–1938, doi:10.3762/bjoc.17.126

• ] and batteries [174]. Due to its accessibility, it is well explored in catalysis for many fields, such as cycloaddition reactions [175], polymerization [176], and C–C cross-coupling methods [177]. Several biologically active compounds have been obtained through cobalt catalysis [178][179][180

A recent overview on the synthesis of 1,4,5-trisubstituted 1,2,3-triazoles

• Pezhman Shiri,
• Ali Mohammad Amani and
• Thomas Mayer-Gall

Beilstein J. Org. Chem. 2021, 17, 1600–1628, doi:10.3762/bjoc.17.114

• decrease in the yield [47]. Some research groups have utilized strain-promoted azide–alkyne cycloaddition reactions (SPAAC) on side chains to afford polymer-based prodrugs. Generally, a range of key strained cyclooctyne derivatives 52 could be reacted with aliphatic azides 51 via this strategy to give

A straightforward conversion of 1,4-quinones into polycyclic pyrazoles via [3 + 2]-cycloaddition with fluorinated nitrile imines

• Greta Utecht-Jarzyńska,
• Karolina Nagła,
• Grzegorz Mlostoń,
• Heinz Heimgartner,
• Marcin Palusiak and
• Marcin Jasiński

Beilstein J. Org. Chem. 2021, 17, 1509–1517, doi:10.3762/bjoc.17.108

• fluorine-containing organic molecules combined with the 1,4-quinone moiety can be considered as a challenging problem of current organic synthesis. Thus, the main goal of the present study was to check the course of [3 + 2]-cycloaddition reactions of electron-deficient CF3-substituted nitrile imines 7 with

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

N-tert-Butanesulfinyl imines in the asymmetric synthesis of nitrogen-containing heterocycles

• Joseane A. Mendes,
• Paulo R. R. Costa,
• Miguel Yus,
• Francisco Foubelo and
• Camilla D. Buarque

Beilstein J. Org. Chem. 2021, 17, 1096–1140, doi:10.3762/bjoc.17.86

• stereoselective synthesis is especially interesting, highlighting the 1,3-dipolar cycloaddition reactions with azomethine ylides as an example of transformation that take place with great stereocontrol, and allow the synthesis of polyfunctionalized pyrrolidines in a single reaction step [91][92]. On the other

Microwave-assisted multicomponent reactions in heterocyclic chemistry and mechanistic aspects

• Shivani Gulati,
• Stephy Elza John and
• Nagula Shankaraiah

Beilstein J. Org. Chem. 2021, 17, 819–865, doi:10.3762/bjoc.17.71

• [29][30], focusing on the synthetic aspect of five, six, seven and dicyclic structures. Later in 2013, Gupta et al. compiled reports of microwave-assisted cross-coupling, MCR with few cycloaddition reactions [31]. During the course of writing this review, we realized the very presence of two reviews

Synthesis of dibenzosuberenone-based novel polycyclic π-conjugated dihydropyridazines, pyridazines and pyrroles

• Ramazan Koçak and
• Arif Daştan

Beilstein J. Org. Chem. 2021, 17, 719–729, doi:10.3762/bjoc.17.61

• inverse electron-demand Diels–Alder cycloaddition reactions between a dibenzosuberenone and tetrazines that bear various substituents. The pyridazines were synthesized in high yields by oxidation of dihydropyridazine-appended dibenzosuberenones with PIFA or NO. p-Quinone derivatives of pyridazines were

• obtained gave absorbance and emission at long wavelengths. Keywords: dibenzosuberenone; inverse electron-demand Diels–Alder cycloaddition reactions; p-quinone methide; polycyclic π-conjugated dihydropyridazines; pyridazines; pyrroles; Inroduction Dibenzosuberone and dibenzosuberenone derivatives are

• electron-demand Diels–Alder cycloaddition reactions of alkenes with tetrazines are commonly used for the synthesis of dihydropyridazines and pyridazines [50][51][52][53][54]. In our previous study, we made a discovery that would form the basis of a new class of dyestuffs with skeletons unlike those of

[2 + 1] Cycloaddition reactions of fullerene C₆₀ based on diazo compounds

• Yuliya N. Biglova

Beilstein J. Org. Chem. 2021, 17, 630–670, doi:10.3762/bjoc.17.55

• in the strain in the fullerene core should be considered as the driving force of the reactivity. The [2 + n] cycloaddition reactions, where n varies from 1 to 4, are the most promising in the functionalization of the fullerene sphere. The [2 + 1] cycloaddition is the most popular variant among

• oxidative hetero- and homocoupling of 217, respectively. It is also noted that dumbbell-like fullerene-containing compound 219 is the first example of a dimeric fullerene that was fully characterized. Conclusion Summarizing our analysis of scientific literature on [2 + 1] cycloaddition reactions to C60

• involved in C60 reactions with diazo compounds is much wider. In addition, the high yield of the target products and the nearly unlimited variability of substituents in the cyclopropane moiety should be noted as advantages of the latter method. Nevertheless, a drawback that all the [2 + 1] cycloaddition

Diels–Alder reaction of β-fluoro-β-nitrostyrenes with cyclic dienes

• Savva A. Ponomarev,
• Roman V. Larkovich,
• Alexander S. Aldoshin,
• Andrey A. Tabolin,
• Sema L. Ioffe,
• Jonathan Groß,
• Till Opatz and
• Valentine G. Nenajdenko

Beilstein J. Org. Chem. 2021, 17, 283–292, doi:10.3762/bjoc.17.27

• (51.6 kJ mol−1). Whereas the entropies of activation (ΔS≠) were −181.8 and −183.1 J mol−1 K−1 for the formation of the endo and exo-isomers, respectively. The values obtained are typical for concerted [4 + 2]-cycloaddition reactions [60]. The free energies of activation () were calculated for 121.26 kJ

All-carbon [3 + 2] cycloaddition in natural product synthesis

• Zhuo Wang and
• Junyang Liu

Beilstein J. Org. Chem. 2020, 16, 3015–3031, doi:10.3762/bjoc.16.251

• ] cycloaddition through diyl trapping with an olefin [14][15] and Trost’s palladium-catalyzed trimethylenemethane cycloaddition [16], which allows the preparation of five-membered carbocycles, have been emerged since the 1970s. Thereafter, many novel and important all-carbon [3 + 2] cycloaddition reactions, such

• complex natural products. Besides the all-carbon [3 + 2] cycloaddition reactions and the corresponding applications described above, the all-carbon [3 + 2] annulation, which undergoes other possible mechanistic pathways other than cycloaddition, proved its usefulness in forging highly-substituted five

• undoubtedly an efficient synthetic transformation that creates two C–C bonds in a single reaction. However, the prior protection of the reactive functional groups, such as the hydroxy and amino groups, are still necessary for most of the all-carbon [3 + 2] cycloaddition reactions. We predict that further

Selective and reversible 1,3-dipolar cycloaddition of 6-aryl-1,5-diazabicyclo[3.1.0]hexanes with 1,3-diphenylprop-2-en-1-ones under microwave irradiation

• Alexander P. Molchanov,
• Mariia M. Efremova,
• Mariya A. Kryukova and
• Mikhail A. Kuznetsov

Beilstein J. Org. Chem. 2020, 16, 2679–2686, doi:10.3762/bjoc.16.218

• chemistry and has attracted much interest. For 1,3-dipolar cycloaddition reactions microwave irradiation not only allows to reduce the reaction time and to increase yields, but in some cases also can affect the selectivity of the reaction [34][35][36]. The efficiency of microwave irradiation has been shown

• for transformations of azomethine imines [37][38][39]. However, only the conversion to pyrazolines and the dimerization were investigated previously for diaziridines under microwave conditions [40][41]. The cycloaddition reactions of unstable azomethine imines generated from diaziridines were

Recent developments in enantioselective photocatalysis

• Callum Prentice,
• James Morrisson,
• Andrew D. Smith and
• Eli Zysman-Colman

Beilstein J. Org. Chem. 2020, 16, 2363–2441, doi:10.3762/bjoc.16.197

• -established benzoxazole and benzothiazole ligands. Such complexes have then been used for α-functionalisations [117], RCAs [118], and cycloaddition reactions [119]. As much of Meggers work has been summarised previously [120], here we will include only recent examples from each reaction class. If an

Regioselective cobalt(II)-catalyzed [2 + 3] cycloaddition reaction of fluoroalkylated alkynes with 2-formylphenylboronic acids: easy access to 2-fluoroalkylated indenols

• Tatsuya Kumon,
• Miroku Shimada,
• Jianyan Wu,
• Shigeyuki Yamada and
• Tsutomu Konno

Beilstein J. Org. Chem. 2020, 16, 2193–2200, doi:10.3762/bjoc.16.184

• Tatsuya Kumon Miroku Shimada Jianyan Wu Shigeyuki Yamada Tsutomu Konno Faculty of Molecular Chemistry and Engineering, Kyoto Institute of Technology, Matsugasaki, Sakyo-ku, Kyoto 606-8585, Japan 10.3762/bjoc.16.184 Abstract [2 + 3] cycloaddition reactions of fluorinated alkynes with 2

• . Despite their effective advantages, on the other hand, the reports on cycloaddition reactions with fluorine-containing alkynes for the construction of fluoroalkylated indene derivatives are rare [21][26]. Recently, our group has reported the first practical synthesis of fluoroalkylated indenol derivatives

• [2 + 3] cycloaddition reactions with a broader substrate scope for the synthesis of fluoroalkylated indenols is still required. Herein we present a synthesis of 2-fluoroalkylated indenols via [2 + 3] cycloadditions of various fluorinated alkynes with 2-formylphenylboronic acids in the presence of

Reactions of 3-aryl-1-(trifluoromethyl)prop-2-yn-1-iminium salts with 1,3-dienes and styrenes

• Thomas Schneider,
• Michael Keim,
• Bianca Seitz and
• Gerhard Maas

Beilstein J. Org. Chem. 2020, 16, 2064–2072, doi:10.3762/bjoc.16.173

• ] cycloaddition reactions [45]. Thus, while styrene and maleic anhydride react only at elevated temperatures, with the more electrophilic (methoxycarbonyl)maleic anhydride two 2:1 adducts are already formed at room temperature: one by two consecutive Diels–Alder reactions, the other one by a Diels–Alder/ene

Regiodivergent synthesis of functionalized pyrimidines and imidazoles through phenacyl azides in deep eutectic solvents

• Paola Vitale,
• Luciana Cicco,
• Ilaria Cellamare,
• Filippo M. Perna,
• Antonio Salomone and
• Vito Capriati

Beilstein J. Org. Chem. 2020, 16, 1915–1923, doi:10.3762/bjoc.16.158

• (g) heterogeneous “click” cycloaddition reactions [15] using DESs as environmentally responsible and non-innocent reaction media. Telescoped, one-pot transformations of phenacyl halides to symmetrical 2,5-disubstituted pyrazines (A), through phenacyl azides as intermediates, were also found to take

One-pot synthesis of oxazolidinones and five-membered cyclic carbonates from epoxides and chlorosulfonyl isocyanate: theoretical evidence for an asynchronous concerted pathway

• Esra Demir,
• Ozlem Sari,
• Yasin Çetinkaya,
• Ufuk Atmaca,
• Safiye Sağ Erdem and
• Murat Çelik

Beilstein J. Org. Chem. 2020, 16, 1805–1819, doi:10.3762/bjoc.16.148

• advantageous: being a one-pot reaction with metal-free reagent, having shorter reaction times, good yields and a very simple purification method. Moreover, using the density functional theory (DFT) method at the M06-2X/6-31+G(d,p) level of theory the mechanism of the cycloaddition reactions has been elucidated

Clickable azide-functionalized bromoarylaldehydes – synthesis and photophysical characterization

• Dominik Göbel,
• Marius Friedrich,
• Enno Lork and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2020, 16, 1683–1692, doi:10.3762/bjoc.16.139

• oxazoline 24, oxazolidine 27 cyclized already during the reaction, caused by the increased basicity of the ring nitrogen. CuAAC reactions of bromocarbaldehydes We further investigated the reactivity of azide-functionalized bromocarbaldehydes 3, 4, and 5 in copper(I)-catalyzed azide–alkyne cycloaddition

• reactions (CuAAC). For this, we treated the azide-functionalized luminophores with alkynes exhibiting different degrees of steric demand, including 1-decyne (29), phenylacetylene (30), 1-ethynyladamantane (31) and 1,3-di-tert-butyl-5-ethynylbenzene (32, see Scheme 5). All triazoles 33–44, based on the

Azidophosphonium salt-directed chemoselective synthesis of (E)/(Z)-cinnamyl-1H-triazoles and regiospecific access to bromomethylcoumarins from Morita–Baylis–Hillman adducts

• Soundararajan Karthikeyan,
• Radha Krishnan Shobana,
• Kamarajapurathu Raju Subimol,
• J. Helen Ratna Monica and
• Ayyanoth Karthik Krishna Kumar

Beilstein J. Org. Chem. 2020, 16, 1579–1587, doi:10.3762/bjoc.16.130

• ]. Among the known synthetic transformations using functionalized MBH adducts, cycloaddition reactions are challenging and attractive for synthetic organic chemists. In this context, acetate-functionalized Morita–Baylis–Hillman adducts have been extensively utilized over other precursors. For example

• ) acetylation, (ii) azidation, and (iii) cycloaddition to produce IV–VIII. In spite of the broad scope and synthetic utility, it is evident that the multistep synthetic methodology is the only existing module for cycloaddition reactions. Our research group is focused on developing one-pot synthetic

• for the synthesis of 3-(bromomethyl)coumarins. Literature-reported cycloaddition reactions of MBH acetates involving azides and alkynes [24][25][26][27][28]. Synthetic methodologies for triazolations of MBH adducts. a) Literature-reported indirect triazolation of MBH adducts [32][33]. b) This work